Академический Документы
Профессиональный Документы
Культура Документы
Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Stand
PB Product concept
Conception
P. 2
Performance P. 4
Inertia P. 5
Applications P. 7
Hinged PB door out-opening in-opening
1 leaf P. 08 P. 12
2 leaves P. 10 P. 14
1 leaf with fixed fanlight P. 16 P. 20
2 leaves with fixed fanlight P. 18 P. 22
1 leaf with lateral fixed light P. 24 P. 28
2 leaves with lateral fixed light P. 26 P. 30
1 leaf with top and lateral fixed light P. 32 P. 36
2 leaves with top and lateral fixed light P. 34 P. 38
Double-action PB door
1 leaf P. 40
2 leaves P. 42
1 leaf with fixed fanlight P. 44
2 leaves with fixed fanlight P. 46
1 leaf with lateral fixed light P. 48
2 leaves with lateral fixed light P. 50
1 leaf with top and lateral fixed light P. 52
2 leaves with top and lateral fixed light P. 54
Options P. 56
Infills P. 94
Installation examples P. 96
Accessory summary P. 99
Tool summary P. 105
Profile summary P. 107
Cross section P. 114
1 PB - Topaze
PB - Topaze Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doo
Product concept
46mm wide tubular profiles with inside 4 types of threshold: Hinging: Double barrier corner gasket between
chamber size 22x42mm and grooves for Fitted or embedded threshold bar Aluminium 2 part hinge in rabbet. Fixed in opening and outer frames for standard and
flashing and architraves. Rebated threshold and reinforced weathering opening and outer frame rabbets by insert slid thermal-break series.
Mitre-cut assembly using corner cleats. facilitating disabled access. into central groove. Double barrier Brush gasket 11 mm for
Marine-quality EPDM rebate gasket fitted Drainable threshold for high water and air 2-dimensional adjustment ensures opening double-action door.
round corners. resistance. frame compression and/or sagging adjustment Infill volumes have similar characteristics to
Outer frame without clip recess. All thresholds are easily removable for relative to outer frame. FB side-hung frames.
Double action: maintenance. Similarly adjustable face-fixed hinge also Horizontal member and plinth drainage is
Mitre-cut assembly using self-locating corner The conception and dimensions of the systems presented in this catalogue are
cleats. in compliance with the French and / or European regulations applicable
at the time of the realization of the document.
Brush gasket 11 mm or finger-protection
For others countries, the fabricator is responsible for the relevancy of
gasket. his fabrication to the local legislation.
2 3 PB - Topaze
PB -Topaze Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doo
Performance Inertia
Number and repartition of hinges Inertia values
face-fixed and rabbet
FP002 11.61 9.47 4.63 2.86 FP012 0.74 13.75 0.51 3.05
170
3 FP004 14.72 19.40 5.53 4.39 FP014 1.75 28.38 1.63 4.54
2400
3 =
200
Outer frame height
2300
2200 3
FP005 15.35 19.41 6.59 4.39 FP015 4.27 1.31 1.84 0.62
2100
2000
2
=
170
2
FP006 60.94 41.22 10.46 17.59 FP016 3.34 3.79 1.50 1.66
700 800 900 1000 1100
Outer frame width
FP009 7.64 4.63 3.35 1.65 FP018 0.07 3.53 0.12 1.54
FP010 1.82 6.11 1.06 2.47 FP019 0.11 16.23 0.22 3.87
4 5 PB - Topaze
PB -Topaze Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doo
Inertia Applications
Inertia values Vertical section
FP040 1.18 0.20 0.84 0.26 8626 28.71 28.71 8.55 8.55
FP041 9.99 7.52 4.34 3.58 8627 13.46 9.55 4.83 3.25
FP042 14.78 15.34 5.97 3.74 8653 3.30 0.06 1.43 0.12
FP043 5.33 1.64 1.91 0.75 8654 58.45 13.11 9.24 6.24
PB031
Horizontal section
PB030
6 7 PB - Topaze
PB -Topaze Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doo
Applications Applications
Hinged door 1 leaf Hinged door 1 leaf
out-opening out-opening
H
h
Horizontal section
L
W
33.1 6 84.4 w
l
JF012
FP002 1020 FP004 KP009 2920 CP014
+ + 8889
1040 CP007 3147
2920
2.7
3160
FP004
46 EE019
61.7
3173
FP017
+ CP033
PB106
1398
EE019 CP004 8889 JF012 3147 EE019 FP004 JP004 EE019 8
PB003
56 6 38.8 19.7
8 9 PB - Topaze
PB -Topaze Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doo
Applications Applications
Hinged door 2 leaves Hinged door 2 leaves
out-opening out-opening
WL
123.5 wl 61.5 6 84.4 wl
CP014 3147 FP005 1020 CP014 JF012
+
1040 8889
2920
2920 3147
2.7
3160
FP004
46 EE019
61.7
3173
FP017
+ CP033
KP009
+ 1398
8
EE019 FP002 FP004 2920 JF012 8889 CP004 CP007 JF012 3147 FP004 JP004 EE019
PB003
PB002
56 6 38.8 19.7 19.7 61.7 6 38.8
10 11 PB - Topaze
PB -Topaze Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doo
Applications Applications
Hinged door 1 leaf Hinged door 1 leaf
in-opening in-opening
h H
Horizontal section
WL
56 6 61.7 wl
3160
46 EE019
3173 61.7
FP017
+ CP033
PB107
1398 8
CP004 8889 2920 JF012 3147 EE019 CP014
PB036
33.1 6 61.7 19.7
12 13 PB - Topaze
PB -Topaze Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doo
Applications Applications
Hinged door 2 leaves Hinged door 2 leaves
in-opening in-opening
Horizontal section
LW
122 wl 84.4 6 61.5 w
l
1020 JF012
CP014 EE019 FP005 3147 FP004 + 1040 JP004 FP002 EE019
8889
2920
2.7
3147
3160
46 EE019
3173 61.7
FP017
+ CP033
KP009 1398 8
8889 EE019 CP004 + CP007 2920 JF012 3147
PB033
PB036
33.1 6 61.7 19.7 19.7 38.8 6 61.7
14 15 PB - Topaze
PB -Topaze Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doo
Applications Applications
Hinged door 1 leaf Hinged door 1 leaf
out-opening with fixed fanlight out-opening with fixed fanlight
PROFILE ACCESSORIES Horizontal section with face-fixed hinges Vertical section
Reference Section Preparation Qty Cutting formula Reference Qty Description
2 Wx - 58 CP004 1 Catch
FP004
2 Hx - 36.5 FP004
CP007 1 Escutcheon CP102
1 W - 46 8690
FP009
2 H1 - 13 CP014 2 Hinge in rabbet CP042 24.7
H1
W
L
Hx = H1 - 14.5
47.5 6 84.4 wl
h
1020
+1040 FP004 2920 EE019 CP014 3156
3147 2.7
3160
46
EE019
FP004
FP017 61.7
PB108 +
KP009 CP033
8690 FP009 CP004 JF012 +CP007 8889 3147 FP004 JP004 VE030
Lx = W
Wx= L --49.5
49.5 3173
(Wx = W - 63.5) 1398 8
(Lx = L - 63.5)
70.3 6 38.8 19.7 (face fixed
(Paumelles hinge)
en applique)
PB014
16 17 PB - Topaze
PB -Topaze Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doo
Applications Applications
Hinged door 2 leaves Hinged door 2 leaves
out-opening with fixed fanlight out-opening with fixed fanlight
PROFILE ACCESSORIES Horizontal section with face-fixed hinges Vertical section
Reference Section Preparation Qty Cutting formula Reference Qty Description
4 Wx/2 - 21 CP004 1 Catch
FP004
3 Hx - 36.5 FP004 CP102
CP005 1 Top catch
FP005 1 Hx - 36.5 CP042 8690 24.7
CP007 1 Escutcheon
1 W - 46 CP014 4 Hinge in rabbet CP034 3156
FP009
2 H1 - 13
CP033 2 Weathering plug for FP017 19.7
1 Wx/2 - 66 (service) 3113
FP017 CP035 1 Bottom catch
1 Wx/2 - 43 (semi-fixed)
CP055 4 Unhinging axis 8664
8670 1 Wx
CP058 1 2 leaves plug
4 Wx/2 - 144
8889
4 Hx - 199.5 EE019 8 Self-locating corner cleat h H2
2 W - 49.5 KP009 1 Door handle FP009 VE030 31.7
2 H2 - 78.5
VE030 3/lm Self drilling screw SR2 4.2 x 30 8889
1 W
8690 VE037 5 Self drilling screw SR2 4.2 x 22 GASKETS
2 H 8670
1020 1 1/2 turn latch lock Reference Qty Description
ALTERNATIVE: face-fixed hinges 1040 1 30 x 30 chrome cylinder JF012 4W+4H1+2H2 Glazing gasket 3148
1 W 1222 2 Lock JP004 2W+6H1 Rebate gasket
8664
2 H 14.5
3147 12 Glazing wedge support 1398 1W1 Brush gasket 11 mm VE030
4 Wx/2 - 144
8889 3148 1 43 x 22 junction book 2920 4W+4H1+2H2 Multifunction gasket
37.2
4 Hx - 199
2 W - 63.5 3156 2 Self-locating corner cleat 43 x 15 FP009
2 H2 - 85.5 45.6
3160 6 Deflector
1 W - 60
FP009 2 H1 - 13 3173 3/lm Self drilling screw SR2 4.2 x 22 Glazing dimensions Fixed light dim. 164.8
6
W/2 - 161 Hx - 177.5 with 8664
ALTERNATIVE: face-fixed hinges w + 28 h + 28
H JP004 6
W - 81 H2 - 64
CP034 4 Insert w + 28 h + 28
FP004
CP042 4 PB hinge nut 38.8
Fixed light dim.
CP102 4 Hinge (axis=21)
with 8690
3113 2 Self-locating corner cleat 43 x 22 JF012
Horizontal section W - 67 H2 - 57
19.7
w + 28 h + 28 2920
L
W H1
Hx = H1 - 14.5
137.8 wl 61.5 6 84.4 w
l
3147 2.7
46 3160
EE019
FP004
FP017 61.7
JF012 KP009 PB032 +
8690 FP009 FP004 8889 CP004 +CP007 JF012 3147 FP004 JP004 VE030 CP033
Lx
Wx==WL -- 49.5
49.5
3173
(Wx = W - 63.5)
(Lx = L - 63.5) 1398 8
70.3 6 38.8 19.7 (Paumelles
(face fixeden applique
hinge)) 19.7 61.7 6 38.8
PB014
18 19 PB - Topaze
PB -Topaze Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doo
Applications Applications
Hinged door 1 leaf Hinged door 1 leaf
in-opening with fixed fanlight in-opening with fixed fanlight
PROFILE ACCESSORIES Horizontal section with face-fixed hinges Vertical section
Reference Section Preparation Qty Cutting formula Reference Qty Description
2 Wx - 30 CP004 1 Catch
FP005 FP008
2 Hx - 23
CP007 1 Escutcheon
1 W - 46 8690
FP015 3113
2 H1 - 13 CP014 2 Hinge in rabbet 24.7
CP033 1 Weathering plug for FP017 VE037 3156
FP017 1 Wx - 75
EE019 4 Self-locating corner cleat 19.7
8670 1 Wx 8664
KP009 1 Door handle
2 Wx - 153 VE037 4 Self drilling screw SR2 4.2 x 22 CP042 CP034
8889
2 Hx - 185.5
1020 1 1/2 turn latch lock H2
2 W - 49.5 FP005
CP100
2 H2 - 78.5 1040 1 30 x 30 chrome cylinder h
31.7
1 W 3147 8 Glazing wedge support
8690
2 H
3148 1 43 x 22 junction book JF012
3156 2 Self-locating corner cleat 43 x 15
ALTERNATIVE: face-fixed hinges GASKETS 8670 8889
3160 4 Deflector
2 Wx - 12 Reference Qty Description
FP005 3165 3/lm Self drilling screw SR2 4.2 x 23
2 Hx - 14 JF012 4W+2H1+2H2 Glazing gasket 3148
1 W - 62 3173 3/lm Self drilling screw SR2 4.2 x 22
FP008 JP004 2W+4H1 Rebate gasket
2 H1 - 14 3165 14.5
1398 1W Brush gasket 11 mm
FP017 1 Wx - 58 ALTERNATIVE: face-fixed hinges
8.7
CP034 2 Insert 2920 4W+2H1+2H2 Multifunction gasket 46
1 W 6
8664 149.9
2 H CP042 2 PB hinge nut
JP004
2 Wx - 136 CP100 2 Hinge (axis=21)
8889 Glazing dim. Glazing dim. with
2 Hx - 177 6 FP015
VE037 3/lm Self drilling screw SR2 4.2 x 22
2 W - 63.5 with hinges in rabbet face-fixed hinges 61.7
2 H2 - 85.5 3113 2 Self-locating corner cleat 43 x 22 Wx - 171 Hx - 163.5 Wx - 153 Hx - 155 H
w + 28 h + 28 w + 28 h + 28 FP005
LW H1
Hx = H1 - 14.5
47.5 6 61.5 lw
2920
2.7
3160
FP005
46
EE019
61.7
FP017
PB109 3173 +CP033
VE037 CP004 1020 8889 KP009 2920 JF012 3147 1398
+1040 + CP007 8
LxWx=
= L -W49.5
- 49.5 PB015
(Lx = L=- W
(Wx 63.5)
- 63.5)
33.3 6 61.7 19.7 (Paumelles
(face enfixed
applique)
hinge)
20 21 PB - Topaze
PB -Topaze Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doo
Applications Applications
Hinged door 2 leaves Hinged door 2 leaves
in-opening with fixed fanlight in-opening with fixed fanlight
PROFILE ACCESSORIES Horizontal section with face-fixed hinges Vertical section
Qty Cutting formula Reference Qty Description
4 Wx/2 - 130
EE019 8 Self-locating corner cleat
FP005 H2
8889 CP100
4 Hx - 185.5 KP009 1 Door handle h
31.7
2 W - 49.5 VE037 5 Self drilling screw SR2 4.2 x 22
2 H2 - 78.5
1020 1 1/2 turn latch lock JF012
1 W GASKETS
8690 1040 1 30 x 30 chrome cylinder
2 H 8670 8889
Reference Qty Description
1222 2 Lock
ALTERNATIVE: face-fixed hinges JF012 4W+4H1+2H2 Glazing gasket
3147 12 Glazing wedge support
JP004 2W+6H1 Rebate gasket 3148
FP004 1 Hx - 14 3148 1 43 x 22 junction book
1398 1W Brush gasket 11 mm 3165 14.5
4 Wx/2 + 2 3156 2 Self-locating corner cleat 43 x 15
FP005 2920 4W+4H1+2H2 Multifunction gasket
3 Hx - 14 8.7
3160 6 Deflector
1 W - 62 46 6
FP008 3165 3/lm Self drilling screw SR2 4.2 x 23
2 H1 - 14 Glazing dimensions Glazing dimensions 149.9
1 Wx/2 - 43 (service) 3173 3/lm Self drilling screw SR2 4.2 x 22 JP004
FP017 Wx/2 - 147 Hx - 163.5 with face-fixed
1 Wx/2 - 21 (semi-fixed)
w + 28 h + 28 6 FP015
1 W ALTERNATIVE: face-fixed hinges hinges
8664 61.7
2 H CP034 4 Insert Wx/2 - 138.5 Hx - 155
8889
4 Wx -121 w + 28 h + 28 H
4 Hx - 177 CP042 4 PB hinge nut FP005
2 W - 63.5 CP100 4 Hinge (axis=21) Fixed light dim. Fixed light dim.
2 H2 - 85.5 VE037 3/lm Self drilling screw SR2 4.2 x 22 with 8690 with 8664 3147
3113 2 Self-locating corner cleat 43 x 22 W - 67 H2 - 57 W - 81 H2 - 64 19.7
w
+ 28 h + 28 w + 28 h + 28
Horizontal section
W
L
H1
Hx = H1 - 14.5
122.9 w
l 84.4 6 61.5 w
L
1020
3165 8690 FP015 CP014 FP005 3147 FP004 VE037 JP004 8690 3156
+1040
2920
2.7
3160
46 FP005
EE019
61.7
FP017
KP009 3173 +CP033
8889 EE019 CP004 + CP007 2920 JF012 3147
Wx=
Lx =WL -- 49.5
49.5 PB038 1398
(Wx = W - 63.5) 8
(Lx = L - 63.5) PB015
(face fixed
(Paumelless hinge)
en applique)
33.3 6 61.7 19.7 19.7 38.8 6 61.7
22 23 PB - Topaze
PB -Topaze Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doo
Applications
Applications
Hinged door 1 leaf
Hinged door 1 leaf
out-opening with lateral fixed light
out-opening with lateral fixed light
PROFILE ACCESSORIES Horizontal section with face-fixed hinges Vertical section
Reference Section Preparation Qty Cutting formula Reference Qty Description
8690 24.7
2 Wx - 58 CP004 1 Catch CP102
FP004 CP042 3156
2 Hx - 36.5
CP007 1 Escutcheon
1 W1 - 35.5 CP034
FP009 CP014 2 Hinge in rabbet
2 H - 23 VE030
FP004 8670
CP033 1 Weathering plug for FP017 45.6
FP017 1 Wx - 103 FP009
CP055 2 Unhinging axis JP004
8670 1 Hx EE019 4 Self-locating corner cleat 137.7
6
2 Wx - 181 KP009 1 Door handle
8889
2 Hx - 199.5 FP004
VE030 3/lm Self drilling screw SR2 4.2 x 30
2 W2 - 39.5
VE037 4 Self drilling screw SR2 4.2 x 22
38.8
2 H - 94 3147
1 W + (W2 - 14.5) 1020 1 1/2 turn latch lock
8690 JF012
1 H + (H - 5) FP009 VE030 3148
1040 1 30 x 30 chrome cylinder
3147 8 Glazing wedge support 2920 19.7
ALTERNATIVE: face-fixed hinges on fixed frame
1 W + (W2 - 14.5) 3148 1 43 x 22 junction book
8664
1 H + (H - 5) 3156 3 Self-locating corner cleat 43 x 15 H
2 Wx - 181 GASKETS
8889
(Paumelles en applique)
3160 4 Deflector
(Hx = H - 32)
Hx = H - 25
2 Hx - 199
Reference Qty Description h 8889
2 W2 - 46.5 3167 1 43 x 15 junction book
JF012 2W1+2W2+4H Glazing gasket
2 H2 - 108 3173 3/lm Self drilling screw SR2 4.2 x 22
1 W1 - 42.5 JP004 2W1+4H Rebate gasket
FP009 2 H - 30 ALTERNATIVE: face-fixed hinges 1398 1W1 Brush gasket 11 mm
CP034 2 Insert 2920 2W1+2W2+4H Multifunction gasket 2.7
CP042 2 PB hinge nut 3160
46
PB110
8690 VE030 FP009 8889 JF012 8889 FP004 EE019 JP004 FP009
24.7 45.6 6 38.8 19.7 Wx= 14.5
Lx =W1
L1--39.5
39.5
(Wx = W1 - 46.5)
(Lx = L1 - 46.5)
(face fixed en
(Paumelles hinge if fixed
applique si ct frame)
dormant)
24 25 PB - Topaze
PB -Topaze Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doo
Applications Applications
Hinged door 2 leaves Hinged door 2 leaves
out-opening with lateral fixed light out-opening with lateral fixed light
PROFILE ACCESSORIES Horizontal section with face-fixed hinges
Reference Section Preparation Qty Cutting formula Reference Qty Description
Vertical section
4 Wx/2 - 21 CP004 1 Catch CP102
FP004 CP042 24.7
3 Hx - 36.5 8690
CP005 1 Top catch
CP034
FP005 1 Hx - 36.5 CP007 1 Escutcheon
3156
FP004 8670
1 W1 - 35.5 CP014 4 Hinge in rabbet
FP009 VE030
2 H - 23
CP033 2 Weathering plug for FP017 45.6
1 Wx/2 - 66 (service) FP009
FP017 CP035 1 Bottom catch 1 leaf
1 Wx/2 - 43 (semi-fixed)
JP004
CP055 4 Unhinging axis 137.7
8670 1 Hx
CP058 1 2 leaves plug 6
4 Wx/2 - 144
8889 EE019 8 Self-locating corner cleat FP004
4 Hx - 199.5
2 W2 - 39.5 KP009 1 Door handle 38.8
FP009 VE030 3148 3147
2 H - 94
VE030 3/lm Self drilling screw SR2 4.2 x 30
1 W + (W2 - 14.5) JF012
8690 VE037 5 Self drilling screw SR2 4.2 x 22
1 H+H-5
1020 1 1/2 turn latch lock 2920 19.7
ALTERNATIVE: face-fixed hinges 1040 1 30 x 30 chrome cylinder
1 W + (W2 - 14.5) GASKETS
8664
1 H + (H - 5)
1222 2 Lock
Reference Qty Description
H
hinges)
4 Wx/2 - 144 3147 12 Glazing wedge support
(Hx = H - 32)
Hx = H - 25
8889 JF012 2W1+2W2+6H Glazing gasket
(Face-fixed hinges)
4 Hx - 199 3148 1 43 x 22 junction book h 8889
2 W2 - 46.5 JP004 2W1+6H Rebate gasket
(Face-fixed
3156 3 Self-locating corner cleat 43 x 15
2 H - 108 1398 1W1 Brush gasket 11 mm
3160 6 Deflector
FP009 1 W1 - 42.5 2920 2W1+2W2+6H Multifunction gasket
3167 1 43 x 15 junction book
2 H - 30
3173 3/lm Self drilling screw SR2 4.2 x 22 2.7
3160
ALTERNATIVE: face-fixed hinges Glazing dimensions Fixed light dim. Fixed light dim.
CP034 4 Insert with 8690 with 8664 FP004
Wx/2 - 161 Hx - 177.5
CP042 4 PB hinge nut w + 28 h + 28 W2 - 57 H - 72 W2 - 64 H - 86 EE019
CP102 4 Hinge (axis=21) w + 28 h + 28 w + 28 h + 28
FP017 61.7
3113 3 Self-locating corner cleat 43 x 22 +
CP033
3173
Horizontal section
1398 8
WL PB034
w1
L1 w2
L2
46
8690 VE030 FP009 FP004 2920 JF012 8889 CP004 KP009 JF012 3147 FP004 JP004 FP009 14.5
+CP007 PB035
24.7 45.6 6 38.8 19.7 2.7 61.7 6 38.8
Lx = L1 - 39.5
Wx= W1 - 39.5
(Lx = L1
(Wx - 46.5)
= W1 - 46.5)
(Paumelles en applique)
(face fixed hinge if fixed frame)
26 27 PB - Topaze
PB -Topaze Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doo
Applications Applications
Hinged door 1 leaf Hinged door 1 leaf
in-opening with lateral fixed light in-opening with lateral fixed light
Vertical section
PROFILE ACCESSORIES Horizontal section with face-fixed hinges
3165
Reference Section Preparation Qty Cutting formula Reference Qty Description
FP008 VE037 33.3
2 Wx - 30 CP004 1 Catch 8690
FP005
2 Hx - 23
CP007 1 Escutcheon
1 W1 - 36 FP015 6
FP015 CP014 2 Hinge in rabbet
2 H - 23
CP033 1 Weathering plug for FP017
JP004
FP017 1 Wx - 75
122.9
EE019 4 Self-locating corner cleat
8670 1 Hx FP005 61.7
KP009 1 Door handle
2 Wx - 153 VE037 4 Self drilling screw SR2 4.2 x 22 FP005 8670 EE019
8889
2 Hx - 185.5
1020 1 1/2 turn latch lock CP042 CP034
2 W2 - 39.5
1040 1 30 x 30 chrome cylinder
2 H - 94 CP100 3147
1 W + (W2 - 14.5) 3147 8 Glazing wedge support 19.7
8690
1 H + (H - 5)
3148 1 43 x 22 junction book
(Hx = H - 32)
Hx = H - 25
GASKETS
(face-fixed hinges)
3156 3 Self-locating corner cleat 43 x 15
ALTERNATIVE: face-fixed hinges Reference Qty Description
3160 4 Deflector H
2 Wx - 12
FP005 3165 3/lm Self drilling screw SR2 4.2 x 23 JF012 2W1+2W2+4H Glazing gasket
2 Hx - 14
JP004 2W1+4H Rebate gasket h
with hinge CP100
w1
L1 w2
L2
47.5 6 61.5 Lw 149.9 w
L
3165 CP004 3147 EE019 CP014 FP015 8670 3148 3156 8690
28 29 PB - Topaze
PB -Topaze Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doo
Applications Applications
Hinged door 2 leaves Hinged door 2 leaves
in-opening with lateral fixed light in-opening with lateral fixed light
ACCESSORIES Horizontal section with face-fixed hinges Vertical section
PROFILE
Reference Section Preparation Qty Cutting formula Reference Qty Description
3165
CP004 1 Catch 33.3
FP004 1 Hx - 23 CP005 1 Top catch FP008 VE037 8690
4 Wx/2 - 7 CP007 1 Escutcheon
FP005
3 Hx - 23 CP014 4 Hinge in rabbet FP015 6
1 W1 - 36 CP033 2 Weathering plug for FP017
FP015 JP004
2 H - 23 CP035 1 Bottom catch
1 Wx/2 - 52 (service) CP058 1 2 leaves plug
122.9
FP017
1 Wx/2 - 29 (semi-fixed) EE019 8 Self-locating corner cleat FP005 61.7
8670 1 Hx KP009 1 Door handle
VE037 5 Self drilling screw SR2 4.2 x 22 FP005 8670 EE019
4 Wx/2 - 130 1020 1 1/2 turn latch lock
8889 CP042 CP034
4 Hx - 185
1040 1 30 x 30 chrome cylinder 3147
2 W2 - 39.5 CP100
1222 2 Lock 19.7
2 H - 94
3147 12 Glazing wedge support
1 W + (W2 - 14.5)
8690 3148 1 43 x 22 junction book
(Hx = H - 32)
1 H + (H - 5)
Hx = H - 25
(face-fixed hinges)
3156 3 Self-locating corner cleat 43 x 15 GASKETS
3160 6 Deflector Reference Qty Description H
ALTERNATIVE: face-fixed hinges
3165 3/lm Self drilling screw SR2 4.2 x 23 JF012 2W1+2W2+6H Glazing gasket
FP004 1 Hx - 14 3167 1 43 x 15 junction book h
JP004 2W1+6H Rebate gasket
4 Wx/2 + 2 3173 3/lm Self drilling screw SR2 4.2 x 22
FP005 1398 1W1 Brush gasket 11 mm
3 Hx - 14
ALTERNATIVE: face-fixed hinges
1 W1 - 45 2920 2W1+2W2+6H Multifunction gasket 2920 JF012
FP008 CP034 4 Insert
2 H - 31
1 Wx/2 - 43 (service) CP042 4 PB hinge nut Glazing dimensions Glazing dimensions 8889
FP017 CP100 4 Hinge (axis=21)
1 Wx/2 - 21 (semi-fixed) Wx/2 - 147 Hx with face-fixed hinges 2.7
1 W + (W2 - 14.5) VE037 3/lm Self drilling screw SR2 4.2 x 22 w + 28 h + 28 3160
8664 Wx/2 - 138.5 Hx - 155
1 H + (H - 5) 3113 3 Self-locating corner cleat 43 x 22
w + 28 h + 28
4 Wx -121
8889 FP004
4 Hx - 177
2 W - 46.5
3173 61.7
2 H - 108 Fixed light dim. Fixed light dim.
FP017
with 8690 with 8664 + CP033
W2 - 57 H - 72 W2 - 64 H - 86
w
+ 28 h + 28 w + 28 h + 28 1398
Horizontal section 8
L PB037
W
w1
L1 w2
L2
122.9 w
l 84.4 6 61.5 wl 149.9 w
L
1020
3165 8690 FP015 CP014 FP005 EE019 +1040 CP014 FP015 8670 3148 3156 8690
3147 8889 JF012 FP004 CP004 KP009 2920 JF012 JP004 PB012
24.7 8.7 6 61.7 2.7 19.7 38.8 6 61.7 +CP007 76.5 14.5
Lx
Wx== L1
W1 -- 39.5
39.5
(Lx
(Wx = W1--46.5)
= L1 46.5)
(Paumelles
(face fixeden applique)
hinge )
30 31 PB - Topaze
PB -Topaze Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doo
Applications Applications
Hx = H1 - 14.5
2 H2 - 86
2 W2 - 46.5 CP034 2 Insert Glazing dimensions Fixed light dim. Fixed light dim.
Wx - 198 Hx - 177.5 with 8690 with 8664 H1
2 H - 108 CP042 2 PB hinge nut
8688 1 H - 32 CP104 2 Hinge (reinforced mullion)
w
+ 28 h + 28 W2 - 57 H - 72 W2 - 64 H - 86 h
w + 28 h + 28 w + 28 h + 28
1 W1 - 42.5 3113 3 Self-locating corner cleat 43 x 22
FP009 2 H1 - 13 3147
Fixed fanlight dim. Fixed fanlight dim. 2.7
3160
with 8690 with 8664
W1 - 57 H2 - 57 W1 - 64 H2 - 64 EE019
w + 28 h + 28 w + 28 h + 28
FP004
Horizontal section FP017 61.7
+ CP033
W1
L1
3173
6 w 1398 8
47.5 84.4 l 164.8
PB014
1020
3156 VE030 + 1040 3147 2920 EE019 CP014 8688 wl 47.4
46
8690 FP009 CP004 8889 KP009 JF012 3147 FP004 JP004 FP009 3148 PB112
24.7 6 38.8 19.7 + CP007 14.5 14.5 24.7
45.6
Lx
Wx== L1
W1 -- 39.5
39.5 W2
L2
(Lx
(Wx == L1
W1--46.5)
46.5)
(Paumelles
(face fixedenhinge
appliqueifsifixed
ct dormant)
frame)
L
W
32 33 PB - Topaze
PB -Topaze Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doo
Applications Applications
Hinged door 2 leaves out-opening Hinged door 2 leaves out-opening
with top and lateral fixed light with top and lateral fixed light Vertical section
PROFILE ACCESSORIES
Horizontal section with face-fixed hinges 8690
Qty Cutting formula Reference Qty Description 24.7
4 Wx/2 - 21 CP004 1 Catch 3156
FP004
3 Hx - 36.5 CP104 8688
CP005 1 Top catch 19.7
FP005 1 Hx - 36.5 CP007 1 Escutcheon
1 W1 - 35.5 CP014 4 Hinge in rabbet
FP009
2 H1 - 13 CP034 h 8889
H2
CP033 2 Weathering plug for FP017
1 Wx/2 - 66 (service)
FP017 CP035 1 Bottom catch 8670
1 Wx/2 - 43 (semi-fixed)
8670 1 Wx CP055 4 Unhinging axis
CP058 1 2 leaves plug 3148
4 Wx/2 - 144
8889 EE019 8 Self-locating corner cleat
4 Hx - 199
VE030 14.5
2 W1 - 39.5 KP009 1 Door handle
2 H2 -79 37.2
VE030 3/lm Self drilling screw SR2 4.2 x 30
2 W2 - 39.5 FP009
VE037 5 Self drilling screw SR2 4.2 x 22
2 H - 94
1020 1 1/2 turn latch lock
FP004 CP042 FP009 VE030 3148 CP020 6 45.6
8688 1 H - 25
1040 1 30 x 30 chrome cylinder 164.8
1 W + (W2 - 14.5) GASKETS
8690 1222 2 Lock
1 H + (H - 5)
Reference Qty Description H JP004 6
3147 16 Glazing wedge support
ALTERNATIVE: face-fixed hinges JF012 4W1+2W2+4H1+2H2+2H Glazing gasket
3148 2 43 x 22 junction book FP004
1 W + (W2 - 14.5) JP004 2W1+6H1 Rebate gasket 38.8
8664 3156 3 Self-locating corner cleat 43 x 15
1 H + (H - 5) 1398 1W1 Brush gasket 11 mm
4 Wx/2 - 144 3160 8 Deflector
8889 2920 4W1+2W2+4H1+2H2+2H Multifunction gasket JF012
4 Hx - 199 3167 1 43 x 15 junction book
2 W1 - 46.5 2920 19.7
Hx = H1 - 14.5
2 H2 - 86 3173 3/lm Self drilling screw SR2 4.2 x 22 Glazing Fixed light dim. Fixed light dim.
with 8664
2 W2 - 46.5
ALTERNATIVE: face-fixed hinges
dimensions with 8690 H1
2 H - 108 W2 - 64 H - 86
CP020 2 Hinges nut expander Wx/2 - 161 Hx - 177.5 W2 - 57 H - 72
w + 28 h + 28
h
8688 1 H - 32 w + 28 h + 28 w + 28 h + 28
CP034 4 Insert
1 W1 - 42.5 CP042 4 PB hinge nut Fixed fanlight dim. Fixed fanlight dim. 3147
2.7
FP009 2 H1 - 13 CP103 2 Hinge (axis=36) with 8690 with 8664 3160
CP104 2 Hinge (reinforced mullion) W1 - 57 H2 - 57 W1 - 64 H2 - 64
EE019
3113 3 Self-locating corner cleat 43 x 22 w + 28 h + 28 w + 28 h + 28
FP004
Horizontal section
FP017 61.7
L1
W1 + CP033
3173
137.7 wl 61.5 6 84.4 w
l 164.8 1398 8
1020 PB014
3156 CP014 EE019 3147 FP005 CP014 8688 w
l 47.4
+ 1040
46
8690 VE030 FP009 FP004 2920 JF012 8889 CP004 KP009 JF012 3147 FP004 JP004 FP009 3148
+ CP007
24.7 45.6 6 38.8 19.7 2.7 61.7 6 38.8 14.5 14.5 24.7
LxWx=
= L1W1- 39.5
- 39.5 L2
W2 PB011
(Lx
(Wx= =L1
W1- 46.5)
- 46.5)
(Paumelles en applique)
(face fixed hinge)
L
W
34 35 PB - Topaze
PB -Topaze Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doo
Applications Applications
Hinged door 1 leaf in-opening
Hinged door 1 leaf in-opening
with top and lateral fixed light Vertical section
with top and lateral fixed light
8690
Horizontal section with face-fixed hinges 24.7
PROFILE ACCESSORIES 3156
Reference Section Preparation Qty Cutting formula Reference Qty Description 19.7
2 Wx - 30 CP004 1 Catch
FP005
2 Hx - 23 FP005 VE037 FP008 8688
CP007 1 Escutcheon
1 W1 - 36
FP015 CP014 2 Hinge in rabbet
2 H1 - 13 h H2
8889
FP017 1 Wx - 75 CP033 1 Weathering plug for FP017
EE019 4 Self-locating corner cleat
8670 1 Wx
8670
KP009 1 Door handle 3148
2 Wx - 153 VE037 4 Self drilling screw SR2 4.2 x 22 3160 3165
8889
2 Hx - 185 FP015
1020 1 1/2 turn latch lock
2 W1 - 39.5
1040 1 30 x 30 chrome cylinder 14.5
2 H2 - 79 CP034
CP042
2 W2 - 39.5 3147 12 Glazing wedge support
37.2 8.7
2 H - 94
3148 2 43 x 22 junction book 6
8688 1 H - 25
CP100
3156 3 Self-locating corner cleat 43 x 15 150.6 8.7
1 W + (W2 - 14.5) 3160 6 Deflector GASKETS
8690
1 H + (H - 5)
H
3165 3/lm Self drilling screw SR2 4.2 x 23 Reference Qty Description
6 61.7
ALTERNATIVE: face-fixed hinges 3167 1 43 x 15 junction book JF012 4W1+2W2+2H1+2H2+2H Glazing gasket
JP004
Hx = H1 - 14.5
2 Wx - 12 3173 3/lm Self drilling screw SR2 4.2 x 22 JP004 2W1+4H1 Rebate gasket
FP005
2 Hx - 14 1398 1W1 Brush gasket 11 mm
ALTERNATIVE: face-fixed hinges
Si paumelle CP100 on fixed frame
1 W1 - 45
FP008 2920 4W1+2W2+2H1+2H2+2H Multifunction gasket
2 H1 - 15 CP034 2 Insert FP005 19.7
FP017 1 Wx - 58 CP042 2 PB hinge nut
CP100 2 Hinge (axis=21)
Glazing dimensions Fixed light dim. Fixed light dim. H1
1 W + (W2 - 14.5) JF012
8664 Wx - 170 Hx - 163.5 with 8690 with 8664
1 H + (H - 5) VE037 3/lm Self drilling screw SR2 4.2 x 22
w + 28 h + 28 W2 - 57 H - 72 W2 - 64 H - 86
8688 1 H - 32 3113 3 Self-locating corner cleat 43 x 22 2920 8889
w
+ 28 h + 28 w + 28 h + 28
2 Wx - 136 2.7
8889
2 Hx - 177
3160
2 W1 - 46.5 Fixed fanlight dim. Fixed fanlight dim.
2 H2 - 86
with 8664 with 8690 EE019
2 W2 - 46.5
W1 - 64 H
2 - 64 W1 - 57 H2 - 57
2 H - 108 FP005
w + 28 h + 28 w + 28 h + 28 61.7
3173
Horizontal section
FP017
1398 + CP033
W1
L1 PB060
6 8
56.3 61.5 w
l
151.2 lw 47.4
3165 FP015 FP005 3147 KP009 2920 EE019 FP015 8688
JP004 +CP007 3148 8690 3156
PB113
1020
CP004 +1040 8889 JF012 JF012 CP014
LxWx=
= L1W1- 39.5
- 39.5 = 29 = 24.7
24.7 8.7 6 61.7 19.7
(Lx = =L1W1
(Wx - 46.5)
- 46.5) 76.5 L2
W2
(face (Paumelles
fixed hinge en applique
if fixed frame)
si ct dormant)
L
W
36 37 PB - Topaze
PB -Topaze Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doo
Applications Applications
Hinged door 2 leaves in-opening
Hinged door 2 leaves in-opening
with top and lateral fixed light
with top and lateral fixed light Vertical section
8690
PROFILE ACCESSORIES 24.7
Reference Section Preparation Qty Cutting formula Reference Qty Description 3156
Horizontal section with face-fixed hinges
FP004 1 Hx - 23 CP004 1 Catch 19.7
CP005 1 Top catch
4 Wx/2 - 7
FP005 CP007 1 Escutcheon
3 Hx - 23
1 W1 - 36 CP014 4 Hinge in rabbet h H2
FP015
2 H1 - 13 FP005 VE037 FP008 8688 8889
CP033 2 Weathering plug for FP017
1 Wx/2 - 52 (service)
FP017 CP035 1 Bottom catch
1 Wx/2 - 29 (semi-fixed) 8670
CP058 1 2 leaves plug 3148
8670 1 Wx 3160
EE019 8 Self-locating corner cleat 3165
4 Wx/2 - 130 FP015
8889 KP009 1 Door handle
4 Hx - 185
14.5
2 W1 - 39.5 VE037 5 Self drilling screw SR2 4.2 x 22
2 H2 - 79
1020 1 1/2 turn latch lock 37.2 8.7
2 W2 - 39.5
1040 1 30 x 30 chrome cylinder CP034 6
2 H - 94 CP042
1222 2 Lock 150.6 8.7
8688 1 H - 25
3147 16 Glazing wedge support CP100 H
1 W + (W2 - 14.5)
8690 3148 2 43 x 22 junction book
1 H + (H - 5) 6 61.7
GASKETS
3156 3 Self-locating corner cleat 43 x 15
ALTERNATIVE: face-fixed hinges Reference Qty Description JP004
Hx = H1 - 14.5
3160 8 Deflector
FP004 1 Hx - 14 JF012 4W1+2W2+4H1+2H2+2H Glazing gasket
3165 3/lm Self drilling screw SR2 4.2 x 23
JP004 2W1+6H1 Rebate gasket
4 Wx/2 + 2 3167 1 43 x 15 junction book FP005
FP005 19.7
3 Hx - 14 1398 1W1 Brush gasket 11 mm
3173 3/lm Self drilling screw SR2 4.2 x 22
1 W1 - 45 2920 4W1+2W2+4H1+2H2+2H Multifunction gasket
FP008
2 H1 - 15
H1
ALTERNATIVE: face-fixed hinges JF012
1 Wx/2 - 43 (service)
FP017 CP034 4 Insert Glazing dimensions Fixed light dim. Fixed light dim.
1 Wx/2 - 21 (semi-fixed)
CP042 4 PB hinge nut Wx/2 - 147 Hx - 163.5 with 8690 with 8664 2920 8889
1 W + (W2 - 14.5)
8664 w + 28 h + 28
1 H + (H - 5) CP100 4 Hinge (axis=21) W2 - 57 H - 72 W2 - 64 H - 86
3160 2.7
8688 1 H - 32 VE037 3/lm Self drilling screw SR2 4.2 x 22 w
+ 28 h + 28 w + 28 h + 28
KP009
CP014 +CP007 JF012
3147 8889 JF012 FP004 CP004 CP014 = 29 = 24.7
19.7 38.8 6 61.7 76.5 L2
24.7 8.7 6 61.7 2.7 Lx = L1 - 39.5 W2 PB059
Wx= W1 - 39.5
(Lx =
(Wx = W1
L1 -- 46.5)
46.5)
(Paumelles en applique)
(face fixed hinge) L
W
38 39 PB - Topaze
PB -Topaze Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doo
Applications
Applications
Double-action door 1 leaf
Double-action door 1 leaf
Vertical section
Horizontal section
W
118.2 W
46 FP042 62.5
CP045
2438 14
1487 PB114
Pivot axis
+ 7977 PB019
FP041 8889 JF012 KP014 3147 FP042 3113 3113
CP089
40 7 48.5 19.7
40 41 PB - Topaze
PB -Topaze Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doo
Applications Applications
Double-action door 2 leaves Double-action door 2 leaves
Vertical section
Horizontal section
W
118.2 W 71.2 7 W
L
46 FP042 62.5
CP045
2438 14
PB018
Pivot axis
PB019
FP041 FP042 8889 1487 1222 KP013 KP014 JF012 3147 FP042 3113
CP089
40 7 48.5 19.7 19.7 52
42 43 PB - Topaze
PB -Topaze Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doo
Applications Applications
Double-action door 1 leaf Double-action door 1 leaf
with fixed fanlight with fixed fanlight Vertical section
8690 24.7
PROFILE ACCESSORIES
47.1 3156
Reference Section Preparation Qty Cutting formula Reference Qty Description
Hx = H1 - 14.5
w + 28 h + 28 W - 67 H2 - 57
w + 28 h + 28
Horizontal section
h
W
132.8 w
148.6
54.6 7 71.2 87 JF012
KP013 FP040 1040 2920 3113 8690 3150 3156
1487
19.7
2642
71.2 3113
46
FP042
62.5
CP046
44 45 PB - Topaze
PB -Topaze Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doo
Applications Applications
Double-action door 2 leaves Double-action door 2 leaves
with fixed fanlight with fixed fanlight Vertical section
8690 24.7
PROFILE ACCESSORIES
47.1 3156
Reference Section Preparation Qty Cutting formula Reference Qty Description
Hx = H1 - 14.5
w + 28 h + 28 *If H (8015) >700 mm. allow 1 extra CP006.
Horizontal section
h
W
132.8 wl 71.2 7 w
JF012
71.2 3113
46
FP042
62.5
CP046
FP043 3113 FP042 8889 1222 1398 KP014 JF012 3147 FP042 FP043 14 2438
1487
Axe pivot
Pivot axis
24.7 29.9 7 48.5 19.7 19.7 52 Pivot axis PB053 CP089
PB022
46 47 PB - Topaze
PB -Topaze Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doo
Applications Applications
Double-action door 1 leaf Double-action door 1 leaf
with lateral fixed light with lateral fixed light
Vertical section
PROFILE ACCESSORIES
Reference Section Preparation Qty Cutting formula Reference Qty Description 3156 8690 24.7
Vertical section on fixed-part
FP040 1 H - 75.5 CP006* 4 Groove reducer
3150
CP007 1 Escutcheon
2 Wx - 74 2880 29.9
FP042 CP035 2 Bottom catch 1 leaf FP043
2 H - 75.5
FP043
1 Wx CP046 1 Pivot set H 1398 7
2 H - 24.7 2920
CP089 1 Floor spring 132.9
8015* 1 H KP004 1 Espagnolette connector 15 x 20 3160 JF012
8670 1 H - 24.7 KP013 1 2 point lock 8889 48.5
2 Wx - 171
KP014 2 Pull handle 3147 2.7 FP042
8889 VE031 3/lm/H Self drilling screw SR2 4.2 x 16
2 H - 212 47.5
8690
2 W2 - 39.5 1040 1 30 x 30 chrome cylinder
19.7
2 H - 94
1487 4 Dome nut M8 29.7
1 W + (W2 - 14.5) 3167
8690 1818 2 Self drilling screw SR2 4.2 x 13
1 H + (H - 5) 5
1846 2 Stainless screw 4 x 40 H
GASKETS 2642 2 Water pipe
Reference Qty Description 2880 1 Superior spring
JF012 2W1 + 2W2 + 4H Glazing gasket
h
3113 4 Self-locating corner cleat 43 x 22
1398 2W1+4H Brush gasket 11 mm 3147 8 Glazing wedge support
2438 2W1 Brush gasket 17 mm
JF012
3148 1 43 x 22 junction book
2920 2W1 + 2W2 + 4H Multifunction gasket 3150 3/lm Clip 2920
3156 3 Self-locating corner cleat 43 x 15 8889
Glazing dimensions Fixed light dim. 3160 2 Deflector
3147
W1 - 227.5 H - 190 with 8690 3167 1 43 x 15 junction book
w + 28 h + 28 2642
W2 - 57 H - 67 7977 1 M8 rod (H: 72 mm)
w + 28 h + 28
*If H (8015) >700 mm. allow 1 extra CP006. 71.2 3113
FP042
62.5
Horizontal section
CP045
14 2438
W1
L1
132.9
CP089
54.6 7 71.2 PB054
46
PB116
3156 FP043 8889 KP014 JF012 3147 3113 FP042 FP043 3150 3148
24.7 29.9 7 48.5 19.7
Wx==L1
Lx W1 - 39.5
- 39.5 29 W
L -- L1
W1--39.5
39.5
W2
L2
W
L
48 49 PB - Topaze
PB -Topaze Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doo
Applications Applications
Double-action door 2 leaves Double-action door 2 leaves
with lateral fixed light with lateral fixed light Vertical section
W1
L1
132.9 wl 71.2 7
CP089
PB054
148.6
FP040 1040
87 1487
8690 1398 3113 139.5
88 7 8670 37.4 wl 47.4
46
PB021
3156 FP043 FP042 8889 1222 KP013 KP014 JF012 3147 FP042 FP043 3150 3148
Axe pivot
Pivot axis
24.7 29.9 7 48.5 19.7 19.7 52
Wx
Lx==W1
L1 -- 39.5
39.5 29 Wx
L -=L1
W1- 39.5
- 39.5
W2
L2
WL
50 51 PB - Topaze
PB -Topaze Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doo
Applications Applications
Double-action door 1 leaf
Double-action door 1 leaf
with top and lateral fixed light Vertical section
with top and lateral fixed light
8690 24.7
PROFILE ACCESSORIES
Vertical section on fixed-part 47.1 3156
Reference Section Preparation Qty Cutting formula Reference Qty Description
Hx = H1 - 14.5
3150 3/lm Clip 2438 2W1 Brush gasket 17 mm 19.7
2920
3156 3 Self-locating corner cleat 43 x 15 2920 4W1+2W2+2H1+2H2+2H Multifunction gasket
3160 6 Deflector H1
h JF012
3167 1 43 x 15 junction book Glazing dimensions Fixed light Fixed fanlight
7977 1 M8 rod (H: 72 mm) W1 - 227.5 H1 - 180 dimensions dimensions
w + 28 h + 28 with 8690 with 8690 2642 19.7
*If H (8015) >700 mm. allow 1 extra CP006. W2 - 57 H - 67 W1 - 57 H2 - 57
w
+ 28 h + 28 w
+ 28 h + 28
71.2 3113
Horizontal section
FP042
W1
L 1 62.5
CP046
132.9 w
14 2438
54.6 7 71.2 8688
46
PB117
3156 FP043 1487 8889 KP014 JF012 3147 3113 FP042 FP043 3150 3148
24.7 29.9 7 48.5 19.7
Wx
Lx = W1
L1 --39.5
39.5 29 L -=L1
Wx W1- 39.5
- 39.5
W2
L2
W
L
52 53 PB - Topaze
PB -Topaze Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doo
Applications
Applications
Double-action door 2 leaves Double-action door 2 leaves
with top and lateral fixed light with top and lateral fixed light Vertical section
Hx = H1 - 14.5
3150 3/lm Clip 2438 2W1 Brush gasket 17 mm 2920 19.7
3156 3 Self-locating corner cleat 43 x 15 2920 4W1+2W2+4H1+2H2+2H Multifunction gasket
H1
3160 8 Deflector h JF012
3167 1 43 x 15 junction book Glazing dimensions Fixed light Fixed fanlight
7977 1 M8 rod (H: 72 mm) W1/2 - 174.5 H1 - 180 dimensions dimensions
w + 28 h + 28 2642 19.7
with 8690 with 8690
*If H (8015) >700 mm. allow 1 extra CP006.
W2 - 57 H - 67 W1 - 57 H2 - 57
w + 28 h + 28 w
+ 28 h + 28 71.2 3113
Horizontal section
FP042
62.5
CP046
W1
L1
132.9 w 71.2 7
14 2438
8688 PB022
148.6 CP089
FP040 1040
87 1487
8690 1398 3113 139.5
88 7 37.4 lw 47.4
46
3156 FP043 FP042 8889 1222 KP013 KP014 JF012 3147 FP042 FP043 3150 3148 PB021
Axe pivot
Pivot axis
24.7 29.9 7 48.5 19.7 19.7 52
Wx
Lx = L1
W1- -39.5
39.5 29 Wx
L -=L1
W1- 39.5
- 39.5
W2
L2
W
L
54 55 PB - Topaze
PB -Topaze Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doo
Options
Threshold options and cutting formula
Standard door
Options
Opening frame Opening frame Opening frame
with threshold 8228 with flat threshold FP018 or FP019 with rebate threshold FP012 Open in
Threshold options and cutting formula P. 57 FP018
or W - 66
FP012 W
8228 W - 81
FP019
Finger-protection gasket P. 62
H of fixed frame H + 50 H of fixed frame H H of fixed frame H-4
Intermediate transom P. 66 H of opening frame H - 50.5 H of opening frame H - 55 H of opening frame H - 51
Stacked connections P. 68 H of straight glazing bead H - 213.5 H of straight glazing bead H - 218 H of straight glazing bead H - 214
H of glazing H - 192 H of glazing H - 196 H of glazing H - 192
Rounded glazing beads P. 70
H H H
Drip mould P. 72
Defense bar P. 74
Door closer P. 75
90 and 135 connections P. 76 FP004
or 1110
Hinge selection P. 77
FP005 61.7 +
Offset hinges P. 78 1831 FP005
Floor spring pivot P. 79
2410 3173
Handle selection P. 80 FP004
11.5 or JE011
Offset handle 1085 P. 81
FP005 61.7
Square handle 1211 P. 82
Pull handle KP014 P. 83 8228 FP017
+ 1835 34 15
Push bar 4339 P. 84 29 1398
Tubular handle 2070 or 2071
with straight connector 2072 P. 85 8
16 20
Tubular handle 2070 or 2071 12
8
with bent connector 2073 P. 86
FP018 or FP019 + CP032 FP012 4
Unpanic handle JPM89 P. 87 + EE022
Closing mechanism alternatives P. 88 Opening frame Opening frame
Electric catch 1009 or 1039 P. 89 with rebate threshold FP014 Open out with drainable threshold FP010 Open in
Electromagnetic lock P. 90
FP014 W - 66 FP010 W - 25.5
1110
FP004 +
1831
FP005
2410
JE011
15 CP001
CP036
FP010
20 28.6
12 11 18.5
5 FP014 + CP032 PB004
56 57 PB - Topaze
PB -Topaze Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doo
Options Options
Threshold options and cutting formula Threshold options and cutting formula
Standard door with plinth Door integrated in FB structure
Plinth with gasket holder section YP001 Plinth with flat threshold FP018 or FP019
Open in and open out Open in and open out Opening frame with flat threshold FP018 or FP019
1 leaf Qty 2 leaves FP018
or W - 66 Door with hinges
FP006 W - 201.5 2 W/2 - 154 FP019 in rabbet face fixed
H of fixed frame H FP018 FP018
ou Wx - 46 ou Wx - 17.5 Wx
YP001 W - 207 2 W/2 - 159.5 H of opening frame H - 59 FP019 FP019
H of straight glazing bead H - 249
H of fixed frame H H of glazing H - 227.5 H of opening frame Hx - 44.5 H of opening frame Hx - 31 Hx - 22
H of opening frame H - 51 H of straight glazing bead Hx - 207.5 H of straight glazing bead Hx - 193.5 Hx - 185
H of straight glazing bead H - 241.5 H of glazing Hx - 185.5 H of glazing Hx - 171.5 Hx - 163
H
H of glazing H - 219.5
Hx Hx
H
2920
JF012
3160
3148 2.7
2.7 FP006
3148 1110 FP005
+ FP004
1831 1110
VE030 +1831 3173
VE030 109
101 2410
FP006 YP001 2410 FP017
YP001
15 1398 15 1398
1398 FP018
12 8 8
20 7.3
12 8 8
7.3 8
FP018 or FP019 + CP032 PB004
PB004 FP018 or FP019 + CP032
Plinth with rebate threshold FP014 Plinth with rebate threshold FP012 Opening frame with rebate threshold FP014
Open in Open out Open out
2.7 2.7
FP006 FP006
3148
FP004
1110
+ VE030 VE030
1831 1110
CP036 + YP001 JE011
2410 106 1831 103.5
JE011 JE011 CP036
YP001 2410
27 1398
1398 15
5 20
20 17 4 20 12
16
5 FP014 + CP032
FP014 + CP032 FP012 + EE022
58 59 PB - Topaze
PB -Topaze Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doo
Options Options
Threshold options and cutting formula Threshold options and cutting formula
Standard door with plinth integrated in FB structure Standard door with plinth integrated in FB structure
Plinth with rebate threshold FP014
Open in
Plinth with gasket holder section YP001 Plinth with flat threshold FP018 or FP019 Door with hinges
in rabbet face fixed
Open out Open out
1 leaf 2 leaves FP014 Wx - 17.5 Wx
FP018
or Wx - 46
FP006 Wx - 181 2 Wx/2 - 144 FP019 H of opening frame Hx - 32 Hx - 23
H of straight glazing bead Hx - 222 Hx - 213
H of opening frame Hx - 49 H of glazing Hx - 200 Hx - 191
YP001 Wx - 187 2 Wx/2 - 149 H of straight glazing bead H - 239
H of glazing H - 217 Hx
H of opening frame Hx - 41
H of straight glazing bead Hx - 231 Hx
H of glazing Hx - 209
Hx 2.7
FP006
3148
Plinth with gasket holder section YP001 Plinth with flat threshold FP018 or FP019
Plinth alternatives on fixed side
Open in Open in Plinth on fixed side piece
Door with hinges Door with hinges using inside sill section FP016
in rabbet face fixed in rabbet face fixed Door with hinges
1 Leaf Wx - 153 Wx - 136 FP018 on rabbet on face-fixed
FP006 or Wx - 17.5 Wx
2 Leav. 2 Wx/2 - 130 2 Wx/2 - 121 FP019
FP006 W2 - 39.5 W2 - 46.5
1 Leaf Wx - 150 Wx - 141
YP001 2 Leav. 2 Wx/2 - 135 2 Wx/2 - 127 H of opening frame Hx - 35 Hx - 26
H of straight glazing bead Hx - 225 Hx - 216 FP016 W2 - 39.5 W2 - 46.5
H of opening frame Hx - 27 Hx - 18 H of glazing Hx - 203 Hx - 194
H of straight glazing bead Hx - 217 Hx - 208
Hx H of straight glazing bead H - 173.5 H - 180.5
H of glazing Hx - 195 Hx - 186
H Glazing H - 151.5 H - 158.5
Hx
H
60 61 PB - Topaze
PB -Topaze Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doo
Options
Double-action door 1 leaf
with finger-protection gasket JP005 Vertical section
Horizontal section
W
118.2 W
CP045
PB118 2438 14
Spring
1487 center line PB019
FP041 JP005 8889 JF012 KP014 3147 FP042 3113 3113
+ 7977
CP089
40 30 48.5 19,7
. 19.7 48.5 30 40
62 63 PB - Topaze
PB -Topaze Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doo
118.2 2880
48.5
PROFILE ACCESSORIES
FP042
Reference Section Preparation Qty Cutting formula Reference Qty Description
CP006* 8 Groove reducer
FP040 2 H - 61
CP007 2 Escutcheon 19.7
1 W
FP041 CP045 2 Pivot set
2 H
4 W/2 - 85 CP089 2 Floor spring
FP042
4 H - 61
KP004 2 Espagnolette connector 15 x 20
8015* 1 H KP013 2 2 point lock
4 W/2 - 182
H h
8889 KP014 2 Pull handle
4 H - 197.5
VE031 3/lm/H Self drilling screw SR2 4.2 x 16
1030 2 Catch 2920 JF012
GASKETS 1040 2 30 x 30 chrome cylinder
Reference Qty Description 1222 2 Lock 3147
1487 8 Dome nut M8
8889 19.7
JF012 2W + 4H Glazing gasket
JP005 6H Finger protection gasket 1818 2 Self drilling screw SR2 4.2 x 13 2642
71.2
1398 2W Brush gasket 11 mm 2642 4 Water pipe 3113
2438 2W Brush gasket 17 mm 2880 2 Superior spring
FP042 62.5
2920 2W + 4H Multifunction gasket 3113 10 Self-locating corner cleat 43 x 22
3147 8 Glazing wedge support CP045
Glazing dimensions 7977 1 M8 rod (H: 72 mm) 2438 14
W/2 - 199.5
*If H (8015) >700 mm. allow 1 extra CP006.
w + 28 PB019
CP089
Horizontal section
W
141.2 W 71.2 30 W
46
Spring
center line
FP041 FP042 8889 1487 KP013 KP014 2920 JF012 3147 FP042 3113
PB020
64 65 PB - Topaze
PB -Topaze Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doo
Options
Intermediate transom
JF012
JF012
2920
2920
19.7
3147
3147 19.7 =
=
8670 3333
= 21.9
3148 8204
29 89.2
74.4
14.5
=
=
=
8889
8889
Ht Ht
PB006 PBi009
66 67 PB - Topaze
PB -Topaze Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doo
Options Options
8654
FP004 CP014 3165 8690
2.7 PB010
W
w 5.2
8690
5.2 3165
8653
2.7
FP002
H FP004
PB013
68 69 PB - Topaze
PB -Topaze Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doo
Options Options
Rounded glazing bead cutting formula Rounded glazing bead cutting formula
8691 8691
3150
Standard door with perimetral opening frame Standard door with perimetral opening frame
Open out Open in Open out Open in
70 71 PB - Topaze
PB -Topaze Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doo
Options
Drip mould cutting formula
1110 1110
+ +
1831 1831
2410 2410
Standard door with or without plinth Standard door with or without plinth
Open Open Open Open
out in out in
1 Leaf W - 78 W - 124 1 Leaf W - 82 W - 127.5
2410 W/2 - 53.5 W/2 - 76.5 2410 W/2 - 55.5 W/2 - 55.5
2 Leav. 2 Leav.
+ W/2 - 30.5 + W/2 - 53.5 + W/2 - 32.5 + W/2 - 78.5
72 73 PB - Topaze
PB -Topaze Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doo
Options Options
Defense bar Level 2 to 4 Door closer
65 mini.
Level 2 to 4
Level 1 to 3
CP090 CP091
1556 Retainer arm door lock Fitting plate for CP090
Level 1 to 3
CP092 CP091
Sliding arm door lock Fitting plate for CP092
CP092 CP091
Sliding arm door lock Fitting plate for CP092
Open
Open inin
65 mini.
1213
1556
46
46
74 75 PB - Topaze
PB -Topaze Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doo
Options Options
90 and 135 connections Choice of face fixed hinges on PB
46
FP002
Open out Open in
56 CP101
CP034
FP002
CP100 FP005
CP042
FP004 CP034 CP042 CP100
22 x 42 FP002
CP101
Compositions
FP008
3113
VE037
CP103
8664
65 CP102 FP004 CP042
CP042 CP034
CP034 CP100 FP005
FP002 46
8626 3113
CP101
8664
22 x 42 VE030 FP009
CP101
CP104 8688
FP005 VE037 FP008 8688
CP034
56
22
CP042 CP034
x
42
or CP101 PB066
00
2
56
46
76 77 PB - Topaze
PB -Topaze Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doo
Options Options
Offset hinges = 36mm Floor spring pivot CP089
with arm for floor spring CP019
On simple frame On composite frame
H
ydraulic floor spring particularly suitable for
aluminium-framed doors.
U
niversal regulation for single and double-
action doors.
Square or rectangular fixed shaft.
Hold open facility at 90 or 105 or no-stop.
F
loor stop necessary at 105, especially for
"no-stop" pivots.
A
15
B
11
5
10
0
-25 -20 -15 -10 -5 0 +5 +10 +15 -20 +25 +30 +35 +40 +45 A : Zone de retour mcanique
Temprature en degrs Celsius B : Zone sans retour
78 79 PB - Topaze
PB -Topaze Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doo
Options Options
Handle selection Offset handle 1085
45 1085
23
1085
Rosette CP007 included
FP004
1487 + 7977
400 mm square handle 1211
ou 1587
325
2071 2072
Tubular handle or ou
2070 2073 PBi025
80 81 PB - Topaze
PB -Topaze Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doo
Options Options
Square handle 1211 Pull handle KP014
37
FP002
23
113 FP002 22 57
NB: NB:Hole
Trouin partie
top part: predrilling
haute : pr-percer
hole
Trou partie basse : drilling
in bottom part: percer
193 according the position
suivant position on the profile
sur profil
Rod M8 7977
Tige filete M8 7977
(to cut at 63mm)
( recouper 63 mm)
ou1587
or 1587
M8 7977
Rod7977
Tige filete
(to cutat6363mm)
( recouer mm)
ou 1587 or 1587
165
400 1487
KP014
PBi053
FP004
1487
PBi060
1211
FP004
82 83 PB - Topaze
PB -Topaze Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doo
Options Options
Push bar 4339 Tubular handle 2070 or 2071
with straight connector 2072
FP004
23
105 min Rabbet
Fond dedepth - 4- 4
feuillure
45.5
FP004 2070
4339
Socket FP004
No Technal
1141
PBi063
34
45 FP004
1141
FP006
2072
8670
4339
or
2070 ou
2071 PBi052
PBi029
84 85 PB - Topaze
PB -Topaze Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doo
Options Options
Tubular handle 2070 or 2071 Unpanic type JPM89
with offset connector 2073
Door PB
86
45
FP004
2073
CP102
Rabbet depth - 160
2070
or
2071
1842 PB043
JPM89
Axe de
= = positionnement
9 9 19 gche
FP004 24 8.5
40
42.5
FP006
2070
or
2071
2073 CP102
FP006
PBi051
PBi059
1842
JPM89
Centreline
= = for strike
9 9 19 plate positioning
24 8.5
42.5
86 87 PB - Topaze
PB -Topaze Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doo
Options Options
Closing mechanism alternatives Electric catch
Locking mechanisms
1009 (temp) or 1039 (no temp)
1and 2 Double Alternatives
leafdoors action
CP026
lock system roller roller section lock
or
FP002
Security cylinder 1042
Escutcheon CP007
Door handle 1061
KP009
Door handle
(w/plate)
1062
Door handle
(w/plate)
1063
1009 1039
Pull handle KP014
Electric
catch
Electric
catch
temp no temp
Striker plate CP004
or
Espagnolette rod 1039
8015
Espagnolette
connector
KP004
Assembly diagram
220 V
Groove reducer CP006
Lock for inactive
leaf CP018
88 89 PB - Topaze
PB -Topaze Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doo
Options Options
Electro-magnetic lock Corner cleat and plug alternatives
Corner cleat
Cage Perfopack
Ref. Description Junction Template
mm crimp/ self tool
pin locating
300 kg 300 kg
pulling resistance
8669 Mullion section 68 mm 15 x 43 3167
pulling resistance
8670 Mullion section 75 mm 22 x 43 3148 2757 4726
Electro-magnetic lock
Electro-magnetic lock
1430
8687 Reinforced mullion 35 cm4 22 x 43 3148 2757 4726
1430
Open in
8688 Reinforced mullion 70 cm4 22 x 43 3148 2757 4726
PB PB PBi PBi
FP005 8270 Outside HP001 8270 HP001 HP004 Outside
8689 Reinforced mullion 116 cm4 22 x 43 3148 2757 4726
FP005 Outside HP004 Outside
CP034
CP034 8698 Mullion section 160 mm 22 x 43 3148 2757 4726
screw CBLZ ST CP041 screw CBLZ ST CP041 screw CBLZ ST screw CBLZ ST
4.2-13 C 4.2-13 C 4.2-13 C 4.2-13 C
(no Technal) (no Technal) (no Technal) (no Technal) FP002 Fixed frame (ASF) 22 x 42 EE019 OF001
5240 45 5240 5240 45 5240
45 45
1430 1430 1430
1430 FP003 Flat fixed frame 22 x 42 EE019 OF001
Inside Inside Inside Inside
8230 8230 8230 8230
FP004 Opening frame (T) 22 x 42 EE019 OF001
PB PB PBi PBi
Outside Outside
FP041 Double action fixed frame 22 x 42 3113 OF001
FP002 OutsideFP004 HP001 Outside
HP003
FP002 FP004 HP001 HP003
FP042 Double action opening section 22 x 42 3113 OF001
21 21
29 29
10 10 10 10
CP042 CP042
90 91 PB - Topaze
PB -Topaze Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doo
Options
Corner cleat and plug alternatives
PB assembly examples
3156
or
3113
8690 or 8664
FB033
8690 or
8664 or
8670 or
8688
3148
8670
FB036
92 93 PB - Topaze
PB -Topaze Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doo
Infills Infills
Straight glazing bead selection Rounded glazing bead selection
17.5
14.5
8797 Rounded
Thickness mm Glazing gasket Outside gasket glazing bead
8682 Straight 26.5 14.5
Thickness mm Glazing gasket Outside gasket glazing bead 6 JF018
7 and 8 JF012 2920 8694
8694 8692
26.5 11.5 6 and 7 JF018
8 and 9 JF012 2920 8684 9 JF018
8684 8889 23.5 11.5
10 and 11 JF012 2920 8798
10 JF018 8891
11 and 12 JF012 2920 12 JF018
23.5 8.5 8798 8796
13 and 14 JF012 2920 8693
13 JF018 2920 8683
8891 8681 14 and 15 JF012 20.5 8.5 15 JF018 2920 8797
16 JF018 16 and 17 JF012
20.5 5.5
17 and 18 JF012 2920 8890 8693 8691 18 JF018 2920 8692
8683 8888 19 JF018 2920 8682 8.5
19 and 20 JF012
20 and 21 JF012 Assembly using 21 JF018
17.5 2.5
22 JF018 3150 (5/lm) FE036 22 and 23 JF012 2920 8796
23 and 24 JF012 2920 8889
8890 8680 24 JF018 2920 8691
25 JF018 2920 8681 25 and 26 JF012
26 and 27 JF012 FE036
Gasket compression 28 JF018 2920 8888 The above table is for the purposes of preliminary technical studies only. For implementation,
29 and 30 JF012 Gasket compression different material tolerances must be taken into account (glazing, profiles, gaskets) and
31 JF018 2920 8680
gaskets one size larger or smaller should be used if necessary.
JF012 JF018 32 and 33 JF012
3.5 to 7 6 to 9 JF012 JF018
The above table is for the purposes of preliminary technical studies only. For implementation, 3.5 to 7 6 to 9
different material tolerances must be taken into account (glazing, profiles, gaskets) and
gaskets one size larger or smaller should be used if necessary.
34 JF018 3147
8611 35 and 36 JF012 2920 8891
37 JF018 8683
38 and 39 JF012 2920
40 JF018 2920 8890
41 and 42 JF012
43 JF018 2920 8682
44 and 45 JF012
46 JF018 2920 8889
47 and 48 JF012
49 JF018 2920 8681
Gasket compression 50 and 51 JF012
52 JF018 2920 8888
53 and 54 JF012
JF012 JF018 55 JF018 2920 8680
3.5 to 7 6 to 9 56 and 57 JF012
The above table is for the purposes of preliminary technical studies only. For implementation,
different material tolerances must be taken into account (glazing, profiles, gaskets) and
gaskets one size larger or smaller should be used if necessary.
Wedging Wedging
100
Fixing lug
Blocwork
Horizontal section
PB101 PBi101
Horizontal section
Blocwork
Wedging Wedging
100 1
PB102
Architrave Wedge
96 97 PB - Topaze
PB -Topaze Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doo
Rectangular
1/2 turn latch Door handle pad-handle
Category 1 silicone sealant 1020 lock Category 1 silicone sealant
1061 (w/plate) 1271 200 x 250 mm
on SNTF foam seal on SNTF foam seal
Fixing lug level aligned to hinges Fixing lug level aligned to hinges
Electric
operated 12 V 300 mm
100 100 1039 lock 1085 offset handle
PB104 30 x 30 PBi104
1040 chrome cylinder 1110 Weather bar clip
98 99 PB - Topaze
PB -Topaze Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doo
Self-locating
Dome nut Tubular handle corner cleat 43 x 15 junction
1487 8 mm 2070 W : 2.30 ml 3113 43 x 22 3151 Hinge 3167 book CP004 Striker plate
Self drilling
screw Brush gasket 11 Bottom-hung
1818 SR2 4.2 x 13 2438 mm 3136 frame latch 3159 Pin 8 mm 3334 Plug for mullion CP007 Escutcheon
Self drilling
Screw CBLZ Junction book screw Arm for floor
1846 ST 3.9 x 38 C 2880 Superior spring 3149 43 x 42 3165 SR2 4.2 x 23 CP001 Sill plug CP019 spring
Self drilling
Multifunction screw Hinge nut
2920 gasket 3150 Clip 3166 SR2 4.2 x 34 CP002 Jamb plinth plug CP020 expander
Adjusting Hinge
CP024 spacer set CP046 Pivot set CP100 axis = 21
Weathering
JE011 gasket KP001 3 points lock
Face fixed
hinges, 36 mm
CP032 Corner cleat CP055 Unhinging axis CP101 offset
Espagnolette
Glazing 3.5 to connector
JF012 7 mm KP004 15 x 20
Face fixed
hinges, 36 mm
offset for com-
CP034 Insert CP089 Floor spring CP103 position
Hinge
Retainer arm reinforced
CP035 Top striker plate CP090 door lock CP104 mullion
Gasket (groove
JP002 cover) KP007 3 point lock
Multifunction
JP004 gasket KP009 Door handle
Self drilling
Screw 3.9 screw 2567 Pin drill 2754 Perfopack tool 2757 Perfopack tool
VE003 x 25 VE031 SR2 4.2 x 16
For pin installation For punching plugs 3331-EP002. For drainage of opening frame FP004 -FP005.
For punching plugs EP002 - 3148.
For drainage of outer frame 8690 .
For drainage of horizontal member 8670.
Self drilling
Screw screw
VE006 4.2 x 31 x 36 VE037 SR2 4.2 x 22
Self drilling For punching FB glazing bead For of outer frame dimensioning. For dimensioning Fb rounded
W118 Silicon cartridge
screw 8682. 8690, 8664, FP041, FP002, and glazing beads 8691, 8692, 8693
VE015 4.2 x 11 opening frames (...) and 8694.
Hinge adjustment
CP100, CP101, CP102 and CP103.
4726 Template
2567 Drill
Tools
OF002 Perfopack tool
OP612 Template
OP602 Template
OP609 Template
20
8670
8689
FP002 FP003 FP009
45.4
56 56 3148 74.5
29 3148 29
24.5 74.5
EE019 32.9 EE019 32.9 22 x 43 22 x 43
22 x 42 22 x 42
20 20
20 20 20 46
FP006 or 115
2.7 CP008 (0.99 m) 46 46
FP004 FP005
61.4 20
20
3148
84.4 8688
38.8
22 x 42 8687
EE019 EE019
61.7
22 x 42 22 x 42
74.5 74.5
111.8 42 3148 29 3148 29
89.1
22 x 43 22 x 43
3148
22 x 42
20 20
28
FP040 76 95
14
8653
2.7 46 75
5 10.6
46
20
FP042 8697
FP041 FP043
48.5 49 46.5
29.9
3113 3167
71 3113 40 22
67.5
22 x 42 2.7 15 x 43
22 x 42
8654
42
5
20
20
37 46 46
8.8 20
12 12.8 36.9
FP015 8698 or 8671 or
31.5 CP030 (0.99 m) CP031 (0.99 m)
FP017
22.9 21.7
2410 28 YP001
3148 3149
27.5
22 x 43
94.5 49
8690
47.5
42 x 43
12 FP008
3156 37
24.4
15 x 43
114.6 28 FP016
160 120
15.3
20
41
20
20 8669
28.6 FP010
8664 3148 34.6
8228 42
54.4 22 x 43
16
67.5 3167
22
15 x 43
3113 43.7
31.7
22 x 43 26.1
20
46 84
46
8 8
FP018 FP019
58.
8
65 24.7
8627
8626
46 20 CP036
46 FP012 20 FP014
72 83.5
46
65
17.3
8891 8684 19.7
90
2
25.1 37.9 8691 8796 8692 8797 8693 8798 8694 19.7
89
8
35
32
44 8512 8.2 8611
2071
30
24
8511
30 4
30
169 170 68
30
D0293 D0294 8517 8535
49
28 28
35
26 8510
30
4
9.4 0610
1213 8518 26.5
9 29
8674 7
2 2
43
8533 8509
30 30
19.2 20 0522
14
2.5
4.6
8015 34
Standard door PB Open out Standard door PB Open out with hinge in rabbet
Standard door PB Open out with hinge face fixed Standard door PB perimetral opening section, open out
Scale 1/4
Scale 1/4
116 117 PB - Topaze
PB -Topaze Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doors - Standard doo
Standard door PB Open out or open in with plinth Standard door PB double action
Scale 1/4
Scale 1/4
Cross section
Scale 1/4
120
- 1st quarter 2011 - Document n 5253.001
All reproduction, translation and adaptation reserved for all countries. The law of March 11 1957 prohibits the copy
or reproduction, for use other than limited to private use of the copier. Any reproduction made in whole or in part
in any form without the agreement of the author is illegal and constitutes infringement of copyright sanctioned by
clauses 425 onwards of the penal code.
Hydro Building Systems International : 270, rue Lon-Joulin BP 63709 Toulouse Cedex 1 France
Tl. 05 61 31 26 26 Fax : 05 61 31 26 00 http://www.technal-int.com