Академический Документы
Профессиональный Документы
Культура Документы
www.philips.com/welcome
HTS8140
HTS8150
+RXVLQJ O O O O O O
'9'ORDGHU X O O O O O
'9'
6XEZRRIHU X O O O O O
/RXGVSHDNHUV O O O O O O
3:%V X O O O O O
$FFHVVRULHV X O O O O O
5HPRWHFRQWURO
FDEOHV
%DWWHULHVLQ X O O O O O
5HPRWH&RQWURO
=Q&
6-7
O: Indicates that this toxic or hazardous substance contained in all of the homogeneous
materials for this part is below the limit requirement in SJ/T11363 2006.
h6-7
X: Indicates that this toxic or hazardous substance contained in at least one of the
homogeneous materials used for this part is above the limit requirement in SJ/T11363 - 2006.
This logo refers to the period ( 10 years ) during which the toxic or hazardous substances or elements
contained in electronic information products will not leak or mutate so that the use of these [substances or
elements] will not result in any severe environmental pollution, any bodily injury or damage to any assets.
This logo refers to the period ( 5 years ) during which the toxic or hazardous substances or elements
contained in the battery will not leak or mutate so that the use of these [substances or elements] will not
result in any severe environmental pollution, any bodily injury or damage to any assets.
4 EN
English
Adjust Bass/Treble 36
Select Ambisound 36
1 Important 6 Select a preset sound effect 37
Safety and important notice 6
Contents
7 Adjust settings 38
2 Your product 7 General setup 38
Features highlight 7 Audio setup 40
Product overview 8 Video setup 41
Preference Setup 44
3 Connect 11
Place the unit 11 8 Additional information 46
Connect video cables 12 Update software 46
Connect subwoofer 14 Care 46
Connect radio antenna 15 Specifications 47
Connect audio cables/other devices 15
Mount the DVD Home Theatre unit 18
9 Troubleshooting 48
4 Get started 19
Prepare the remote control 19 10 Glossary 50
Find the correct viewing channel 20
Start Ambisound setup 20
Turn on Progressive Scan 22
Activate EasyLink control 23
Select a play source 24
5 Play 25
Play from disc 25
Play video 26
Play music 29
Play photo 30
Play from USB device 31
Play from portable media player 32
Play from iPod 32
Play from radio 34
EN 5
6 EN
English
Congratulations on your purchase, and speakers to give an embracing surround
welcome to Philips! To fully benefit from the experience without the hassle of setting up a
support that Philips offers, register your product full range of speaker system.
at www.philips.com/welcome.
Your product
The all-in-one SoundBar DVD Home Theatre is USB direct and MP3 link
designed to complement your home perfectly. Simply plug your USB device into the USB
Enjoy the SoundBar DVD Home Theatre with socket to play your MP3/WMA/JPEG/DivX files;
state-of-the-art Ambisound surround sound and or plug your portable media player to the MP3
picture quality without the clutter of multiple LINK socket to enjoy the music play in superb
speakers. sound quality.
India
ALL 5
EN 7
8 EN
English
press VOL +- to set its level setting.
q VOL +-
i AUDIO SYNC Adjust the volume level.
Select an audio language/channel.
r AMBISOUND
Press and hold to access audio sync
Select different surround sound
setting. Then press VOL +- to set
Your product
output: auto, multi-channel or stereo.
the audio delay time.
RADIO: toggle between FM stereo and s Numeric buttons
mono mode. Enter a preset number or item to play.
j SOUND t SUBTITLE
Select a predefined sound effect. Select DVD or DivX subtitle language.
k REPEAT / PROGRAM u HDMI / ANGLE
Select various repeat or shuffle modes; Select a video resolution setting for
turns off repeat or shuffle mode. HDMI output.
RADIO: press this button to start Press and hold to select a different
manual radio preset. viewing angle of a DVD movie.
RADIO: press and hold this button to v ZOOM
start automatic radio preset.
Zoom in or out the picture on the TV.
l OK
Confirm an entry or selection.
m Cursor buttons (v V b B)
Navigate through the on-screen menu.
Press left or right for fast backward or
forward search.
RADIO: press up or down to tune the
radio frequency.
RADIO: press left or right to start auto
search.
n BACK / TITLE
Return to the previous display menu.
For DVD, go to title menu.
For VCD version 2.0 or SVCD with
PBC turned on: return to the menu
during playback.
o / (Previous/Next)
Skip to the previous or next title/
chapter/track.
RADIO: select a preset radio station.
EN 9
7
SOURCE AMBISOUND
MP3 LINK
11 10 9 8 7 6 5 4 3 2 1
Note g SOURCE
Select a play media: DISC, USB, DOCK,
Control buttons on this DVD Home Theatre unit
(SoundBar) are operated through touch screen RADIO FM, RADIO AM/MW,
display. The control displays will be dimly lit after OPTICAL INPUT, DIGITAL INPUT,
one seconds of inactivity. AUX1 INPUT, AUX2 INPUT, AUX3
INPUT or MP3 LINK.
a2
h Z (Open/Close)
Turn on this unit or turn off to standby
Open or close the disc compartment.
mode.
Press and hold to turn on this unit from i Disc compartment
a low power standby mode.
Left side panel
b Display panel
j MP3 LINK socket
c AMBISOUND
To connect portable audio player.
Select different surround sound output:
auto, multi-channel or stereo. k (USB) socket
To connect USB flash drive, USB
d u (Play/Pause)
memory reader or digital camera.
Start or pause disc play.
RADIO: start auto radio installation
(only available for first time setup). Tips
10 EN
English
This section describes the basic connections Place this unit on top of a table or mount it
required for this DVD Home Theatre unit on the wall (see chapter Mount the DVD
before it can be used. Home Theatre unit).
Never place this unit in an enclosed cabinet.
Install this unit near the AC outlet where
Connect
Basic connections: the AC power plug can be easily reached.
Place the unit
Connect video cables
Connect subwoofer
Connect radio antenna
Optional connections:
Connect audio cables/other devices
Connect audio from TV
Connect audio from cable box/
recorder/game console
Connect portable media player
Connect USB device 1 Place this DVD Home Theatre unit near to
Connect iPod docking station the TV.
Mount the DVD Home Theatre unit Place it at a height that is closest to the
listening ear-level.
Note
2 Position this DVD Home Theatre so that it
Refer to the type plate at the rear or bottom of the is directly parallel to the listening area.
product for identification and supply ratings.
Before you make or change any connections, ensure
that all the devices are disconnected from the power
outlet.
Note
You may purchase a separate table top stand that
can support both your Philips Plasma/LCD TV and
this DVD Home Theatre unit from the nearest
Philips retailers.
EN 11
This section describes how to connect this 1 Pull up the catch to remove the rear cover.
DVD Home Theatre unit to your TV so to
enable viewing of disc play.
Select the best video connection that your TV
can support.
Option 1: Connect to HDMI socket (for a
HDMI, DVI or HDCP-compliant TV).
Option 2: Connect to component video
socket (for a standard TV or Progressive
Scan TV).
Option 3: Connect to Video (CVBS) socket
(for a standard TV). 2 Connect the cables to the corresponding
sockets and direct the cables to the
CABLE OUT point.
Note
You must connect this unit directly to a TV.
Note
All the cables must be placed properly inside the rear
panel in order for the rear cover to close.
12 EN
English
HDMI
Connect
OUT
HDMI IN Y Pb Pr
COMPONENT
VIDEO OUT
Note
The HDMI connector is only compatible with HDMI
compliant TVs and DVI-TVs. 1 Connect the component video cables (not
supplied) from the Y PB PR sockets on this
unit to the component video input sockets
Tips on your TV.
To optimise the video output, see chapter Adjust If a progressive scan TV is used, you
settings > [ Video Setup ] > [ Advance Picture ] may turn on the progressive scan mode
for details. (see chapter Turn on Progressive Scan
This unit is HDMI CEC compatible. It enables for details).
connected TV/device to control each other over
HDMI, see chapter Activate EasyLink control for
details. Tips
Use a HDMI/DVI adaptor in case your TV has only
a DVI connection. An extra audio connection is The component video input socket on your TV may
needed to complete this connection. be labelled as Y Pb/Cb Pr/Cr or YUV.
To route the audio from your TV to this DVD Home This type of connections provide good picture
Theatre unit, connect an audio cable from the audio quality.
input on this unit to the audio output on your TV.
This type of connections provide best picture quality.
EN 13
2 1
LOUDSPEAKERS
3
TO SUBWOOFER
14 EN
English
This section describes how you can route the
3 sound from other devices to this DVD Home
Theatre unit in order to enjoy sound output or
Connect
audio play with multi-channel surround
capabilities.
4
2
Connect audio from TV
1 (also used for EasyLink control)
Note
Note
To listen to the audio output from this connection,
Before connect to power outlet, ensure that the press AUX/DI /MP3 LINK repeatedly until AUX1
voltage selector (at the rear of this unit) is set to the
INPUT is displayed on the display panel.
local power line voltage.
EN 15
OPTICAL OUT
L COAXIAL
DIGITAL OUT
R
AUX 2 AUX 3
Note
To listen to the audio output from this connection,
press AUX/DI /MP3 LINK repeatedly until DIGITAL
INPUT is displayed on the display panel.
1 Connect an audio cable (not supplied)
from the AUDIO IN-AUX2 or AUX3 or
sockets on the subwoofer to the AUDIO
OUT sockets on the device. 1 Connect an optical cable (not supplied)
from the OPTICAL IN socket on the
subwoofer to the OPTICAL OUT socket
Note on the device.
To listen to the audio output from this connection,
press AUX/DI /MP3 LINK repeatedly until AUX2
INPUT or AUX3 INPUT is displayed on the display Note
panel.
To listen to the audio output from this connection,
press AUX/DI /MP3 LINK repeatedly until
OPTICAL INPUT is displayed on the display panel.
16 EN
English
DOCK
Connect
MP3
Note
This DVD Home Theatre unit can only play/view
MP3, WMA/WMV, DivX (Ultra) or JPEG files that
are stored on such devices.
To listen to the audio output from this connection,
press USB.
EN 17
18 EN
English
1 Select the source you wish to control by
pressing the DISC, USB, RADIO or
AUX/DI/MP3 LINK or DOCK button.
Prepare the remote control 2 Then select the desired function (for
Get started
example , ).
If you are not going to use the remote control for a bB Move left or right.
long time, remove the batteries.
Confirm a selection.
Enter numbers.
EN 19
1 Press 2 to turn on the DVD Home Before you start, ensure that you have made all the
Theatre unit. required connections.
Complete the Ambisound setup for this unit before
2 Press DISC to switch to disc mode you insert a disc to play.
20 EN
English
press B.
Room Acoustics [ Listening Position ] menu is displayed.
Please select the type of walls that surround
Listening Position
your room:
Select the distance between your listening position
Get started
Hard (Concrete, wood) and the SoundBar system:
Soft (Curtains, open space)
Near (> 2m / 78in )
Default (2-3m / 78-118in)
Far (< 3m / 118in)
Back Change Select
press B.
[ Room Placement ] menu is displayed. 9 Select the distance between the listening
position and the speakers, then press B.
Room Placement
10 The speaker setting is complete, press B to
Select the Sound Bar system placement position exit.
in your room:
This DVD Home Theatre unit is now ready for
Middle of room
use.
Corner of room
Near the right wall
Near the left wall
Tips
Back Change Select
To change the menu display language, see chapter
Adjusting settings - [ General setup ] > [ OSD
7 Select the DVD Home Theatre unit
Language ] for details.
If you connect this unit to a HDMI CEC compliant
(SoundBar) placement in the room, then TV using a HDMI cable, it switches automatically to
press B. the menu display language as per your TV setting.
[ Height ] menu is displayed.
Height
EN 21
Video Setup
TV Type On
TV Display Off
Picture Settings
Advanced Picture
Closed Caption
Progressive
Note
If a blank/distorted screen is displayed, wait for 15
seconds for the auto recover.
If no picture displayed, turn off the progressive scan
mode as follows:
1) Press Z to open the disc compartment.
2) Press B.
3) Press SUBTITLE.
22 EN
English
This feature is only applicable if this unit is be placed in the disc compartment before operation.
connected to HDMI CEC compliant TV/device. Philips does not guarantee 100% interoperability
with all HDMI CEC compliant devices.
It enables all the linked devices response or
react to certain commands simultaneously with
one touch control.
Get started
Map the audio inputs to the
1 Turn on the HDMI CEC operations on
connected devices
your TV and other connected devices. See
TVs/devices manual for details.
Note
2 You can now enjoy the EasyLink controls.
Before you start, ensure that an audio connection
One touch play [ Auto Wake-up TV ] has been made between this unit and your TV/
devices.
When you press PLAY button, this unit will
wake-up from standby mode and start disc
play (if a video disc is found in the disc 1 Press DISC.
compartment) and it will also turn on your
TV and switch to the correct viewing
2 Press OPTIONS.
[ General Setup ] menu is displayed.
channel.
3 Press B.
One touch power off [ System Standby ] 4 Select [ EasyLink ], then press B.
When you press and hold STANDBY
button, it will turn off this unit and all the General Setup
linked devices to standby.
This unit also responses to standby EasyLink Auto Wake-up TV
command from other HDMI CEC devices. Disc Lock System Standby
Display Dim System Audio Control
OSD Language Audio Input Mapping
One touch audio input switching [ System
Screen Saver
Audio Control ] Sleep Timer
This unit is able to render the audio signals Standby Mode
from the active source. It switches DivX(R) VOD Code
automatically to the corresponding audio
input and output the sound from its [ Auto Wake-up TV ] and [ System
speaker system. Standby ] functions are turned on by
Before you can enjoy this function, you
default in the factory.
have to map the audio inputs to the 5 Select [ System Audio Control ] > [ On ],
connected devices. then press OK.
You can use any HDMI CEC TV/device
remote control to adjust the volume. 6 Select [ Audio Input Mapping ], then press
OK.
EN 23
AUX1 Input TV
SOURCE AMBISOUND
24 EN
English
restrictions. Ensure that the DVD video you play is
for the same region zone as your player (indicated
on its rear).
This unit can support playback of the following file
Play from disc formats: MP3/WMA/JPEG/DivX/WMV 9.
About WMV 9 - this unit only supports Main Profile
Play
(low level) and Simple Profile. Advanced Profile and
DRM-protected video files are not supported.
Playable discs
Play a disc
DVD Video
Region 3 (Asia Pacific,
Taiwan, Korea) Caution!
Region 4 (Australia, New Never place any objects other than discs into the
Zealand) disc compartment.
Region 6 (China) Never touch the disc optical lens inside the disc
compartment.
Region 5 (India)
DVDRW (DVD Rewritable)
1 Press Z to open the disc compartment.
2 Insert a disc with its label facing up.
DVDR (DVD Recordable)
For double-sided disc, load the side to
play faces up.
Super Video CD
EN 25
Note
1 Play a title.
26 EN
English
If the video play is slower than the audio output
(sound does not match with the pictures), you
can delay the audio output to match the video.
Play
1 Press DISC to access disc main menu.
2 Select a play option, then press OK.
In some menus, press number buttons 1 Press and hold AUDIO SYNC until
to input your selection. AUDIO SYNC XXX is displayed.
To return to the title menu during XXX denotes the delay time.
playback, press TITLE.
2 Within five seconds, press VOL +- to
set the delay time for audio output.
Tips
The default setting for PBC is on. To change the
default setting, see chapter Adjust settings -
[ Preference Setup ] > [ PBC ] for details.
EN 27
Stop play.
For DivX Ultra video, press
this button again to display
the contents menu.
Display DivX Ultra video
information.
Note
Only those DivX videos that were rented or
purchased using the DivX registration code of this
unit can be played (see chapter Adjust settings >
[ General Setup ] > [ DivX(R) VOD Code ] for
details).
If the subtitle does not appear correctly, change the
subtitle language (see chapter Adjust settings -
[ Preference Setup ] > [ DivX Subtitle ] for details).
The subtitle can only be displayed up to an average
of 45 characters.
This unit can play DivX video files that are up to 4GB
in size.
28 EN
English
MP3/WMA is a type of highly compressed
Note audio file (files with .mp3 or .wma extensions).
For some commercial audio disc, playback may
resume from the point where it was last stopped. To 1 Insert a disc or USB that contains the MP3/
start playback from first track, press . WMA music.
Play
2 Press DISC or USB.
A contents menu is displayed.
Control a track 3 Select a folder, then press OK.
1 Play a track.
4 Select a track to play, then press u.
To return to the main menu, press v
2 Use the remote control to control the until Previous folder is selected, then
track. press OK.
EN 29
Button Action
b Skip to the previous photo.
30 EN
English
Play MP3/WMA music files and JPEG photo
This unit can only play/view MP3, WMA/WMV,
files simultaneously to create musical slideshow.
DivX (Ultra) or JPEG files that are stored on
The MP3/WMA and JPEG files must be stored
such devices.
on the same disc or USB device.
Play
Play MP3/WMA music.
2 Navigate to the photo folder/album and
press u to start slideshow play.
Slideshow begins and continues till the
end of the photo folder or album.
Audio continues to play till the end of
the disc.
To return to the menu, press BACK. 1 Connect a USB flash drive or USB memory
card reader to the (USB) socket on
3 To stop slideshow play, press x. this unit.
4 To stop music play, press x again. 2 Press USB.
A contents menu is displayed.
Tips
If the device does not fi t into the USB socket,
connect it through a USB extension cable.
If a multiple USB card reader is used, only one of the
connected USB drive contents can be accessed.
If a USB HDD is used, ensure that an auxiliary
power cord connected to the USB HDD for proper
operations.
Digital cameras that use PTP protocol or require
additional programme installation when connected
to a PC are not supported.
EN 31
4 To stop play, press STOP button on your If your iPod cannot be fit into the docking
portable media player. station, adjust the support as below.
A B
Note
Control playback is only possible on your portable
media player.
Stop play on the portable media player before you
switch to other play media/source.
A adjustable support
B knob
32 EN
English
the adjustable support.
2 Adjust the support A until it can fit your Button Action
iPod. Change the volume level.
3 Turn the knob clockwise to tighten it.
Play
Select a predefined sound
Control iPod music
effect.
Select an Ambisound effect.
Pause/resume play.
EN 33
Note
This unit can store up to a maximum of 40 radio
stations (and 20 radio stations from AM/MW band).
Note If auto installation is not activated or less than 5
radio stations are stored, AUTO INSTALL will be
For China/Latin America region only, if you want to displayed again the next time you turn on to radio
receive AM/MW radio band, connect the AM loop mode.
antenna (supplied) to the AM/MW sockets on this
DVD Home Theatre unit.
Tips
For better FM stereo reception, connect an external
FM antenna (not supplied).
Position the antenna as far away as possible from
your TV, VCR or other radiation source to prevent
unwanted interference.
34 EN
English
1 Press RADIO repeatedly to select FM or
AM/MW band. 1 Press RADIO repeatedly to select FM or
2 Use the remote control to control the AM/MW band.
radio. 2 Press m M.
Play
The radio frequency indication starts to
Button Action change until a radio station is detected.
Select a preset radio station. 3 Repeat step 2 until you tune to the radio
station you wish to store.
m M Tune the radio frequency To finetune the radio frequency, press
backward/ forward. vV.
Toggle between FM stereo 4 Press PROGRAM.
and FM mono mode. If no action is carried out within 20
Press and hold this button to seconds after the above step, it exits
delete the preset station from the preset mode.
the preset list.
The preset number for
5 Press (or the number buttons) to
other radio stations select a preset number to store.
remain unchanged 6 Press PROGRAM to confirm.
EN 35
Options Descriptions
Adjust Bass/Treble AUTO The surround output will be
selected based on the audio
stream of the played content.
MULTI- Multi-channel surround sound.
CHANNEL
STEREO Stereo sound.
Note
If the volume control is not used within 10 seconds, it
resumes normal volume control function.
36 EN
English
Adjust sound
1 Press SOUND repeatedly to select a
sound effect that most suits the video or
music you play.
Video / Descriptions
Music /
ACTION / Enhanced low and high
ROCK / range for great sounding
movie effects and
atmosphere. Great for
action movies and rock/pop
music.
DRAMA / Clear mid and high range.
JAZZ Recreates the atmosphere
of a live club with the artist
just in front of you. Good
for Jazz music and watching
dramas.
CONCERT / Flat and pure sound mode.
CLASSIC Ideal for listening to classical
music and watching live
concert DVDs.
GAMING / Slightly enhanced low range
PARTY and strong mid range ideal
for party music and video
gaming.
SPORTS Moderate mid range and
surround effects for clear
vocals and the atmosphere
of a live sports venue.
NEWS Enhanced mid range for
clear vocals/speech.
EN 37
38 EN
English
devices correctly to panel to suit the lighting in your room.
enable automatic [ 100% ] normal brightness.
switching of input source. [ 70% ] medium brightness.
1. Press OK to start [ 40% ] dimmest display.
scanning of devices.
Adjust settings
2. Select the audio input [ OSD Language ]
to map (e.g. AUX1 Select the default on-screen menu
Input, AUX2 Input), language.
then press B.
3. Select the correct [ Screen Saver ]
device that connected Turn off or on the screen saver mode. It
to this audio input, helps to protect the TV screen from being
then press OK. damage due to over exposure to a static
image for too long.
Note [ On ] set the screen saver to appear
after 15 minutes of inactivity (for
Your TV and other connected devices must be example, in pause or stop mode).
compliant with HDMI CEC.
You must turn on the HDMI CEC operations on [ Off ] disable screen saver mode.
your TV/devices before you can enjoy the EasyLink
controls. See your TVs/devices manual for details. [ Sleep Timer ]
Philips does not guarantee 100% interoperability
with all HDMI CEC compliant devices.
Switch to standby automatically after the
preset time.
[ Off ] disable sleep mode.
[ Disc Lock ] [ 15, 30, 45, 60 mins ] select the
Set play restriction for a specific discs. count down time before it switches to
Before you start, place the disc in the disc standby.
compartment (maximum 40 discs can be
locked). [ Standby Mode ]
[ Lock ] restrict access to the current Set the standby mode.
disc. The next time you want to play [ Normal ] normal standby power
this disc or unlock it, you need to enter consumption.
the password. [ Low Power ] low standby power
[ Unlock ] all discs can be played. consumption. However, it requires
Tips longer time to power up.
EN 39
Audio Setup
Ambisound Setup
HDMI Audio
Night Mode
[ Ambisound Setup ]
Change the Ambisound setup.
Options Descriptions
[ Setup Select this if you want to
Guide ] go through the complete
Ambisound settings.
[ Room Select the type of walls
Acoustics ] that surround your room.
[ Room Select this unit placement
Placement ] in the room.
40 EN
English
for detailed information.
1 Press OPTIONS.
[ General Setup ] menu is displayed.
[ HDMI Audio ]
2 Press V to select [ Video Setup ], then
When you connect this unit and TV with press B.
Adjust settings
HDMI cable, select the audio output
setting for this connection. 3 Select an option, then press OK.
[ On ] the sound is output through
both your TV and this speaker system. Video Setup
If the audio format on the disc is not TV Type
supported, it will be downmixed to TV Display
two-channel sound (linear-PCM). Picture Settings
[ Off ] disable audio output from Advanced Picture
your TV. The sound is only output Closed Caption
through this speaker system. Progressive
[ Night Mode ]
Make loud sound level softer and soft See the explanations of the above
sound level louder so that you can watch options in the following pages.
the DVD movies at a low volume, without
disturbing others. 4 Select a setting, then press OK.
[ On ] for quiet viewing at night To return to the previous menu, press
(DVDs only). BACK.
[ Off ] enjoy surround sound with a To exit the menu, press OPTIONS.
full dynamic range.
EN 41
4:3 Pan Scan (PS) 4:3 Letter Box (LB) 16:9 (Wide Screen)
[ Gamma ] Adjust the colour of an
image element (pixel) to produce a
[ 4:3 Pan Scan ] for standard TV, a perfect and clear picture.
full-height screen display with the sides
trimmed. [ Chroma Delay ] Adjust the advance
delay of chroma signals to produce a
[ 4:3 Letter Box ] for standard TV, a
perfect and clear picture.
wide-screen display with black bars on
the top and bottom. [ True Life ] Increase the contrast
[ 16:9 Wide Screen ] for wide-screen and colour intensity to produce a more
TV (frame ratio 16:9). dynamic picture.
42 EN
English
Options Descriptions [ On ] show the sound effects in
subtitle. Only applicable to disc with
[ Superwide ] Centre position of the
Closed Caption information included
screen is stretched less
and your TV supports this feature.
than the side. This
setting is only applicable [ Off ] disable closed caption.
Adjust settings
if the video resolution is
[ Progressive ]
set to 720p or 1080i/p.
If your TV can support progressive signals,
[ 4:3 Pillar No stretching of the
you can activate the progressive scan
Box ] picture. Black bars are
mode of this unit.
displayed on both sides
[ On ] turn on progressive scan
of the screen.
mode.
[ Off ] Picture will be displayed
[ Off ] disable progressive scan mode.
according to the format
of the disc. Tips
See chapter Get Started - Turn on Progressive Scan
Note for detailed information.
This setting is only available if you have set the [ TV
Display ] setting to [ 16:9 Wide Screen ].
Note
If the setting is not compatible with your TV, a
blank screen appears. Wait for 15 seconds for auto
recover or press HDMI repeatedly until the picture
appears.
EN 43
Note
Rated DVDs above the level you set in [ Parental ]
require a password to be played.
The ratings are country-dependent. To allow all discs
to play, select 8.
Some DVDs have ratings printed on them but are
not recorded with ratings. This function has no
effect on such DVDs.
Tips
To set or change your password, go to
[ Preference Setup ] > [ Password ].
44 EN
English
(playback control), you can access the disc DivX subtitle.
contents through an interactive menu.
[ Standard ] English
[ On ] an index menu is displayed
when you load a disc for play. [ Chinese ] Simplified Chinese
[ Off ] skip the menu and start play [ Korean ] Korean
Adjust settings
from the first title.
Note
[ MP3/JPEG Nav ] Ensure that the subtitle file has the exact same file
Turn off or on MP3/WMA folder display name as the movie file. If for example the filename of
the movie is Movie.avi, then you will need to name
when you play a media that contains MP3/
the text file Movie.sub or Movie.srt.
WMA files.
[ With Menu ] display the folders of
MP3/WMA files. [ Version Info ]
[ Without Menu ] display all the files. Display the software version of this unit.
[ Password ] Tips
Follow the instructions on the TV to set or This information is required when you want to find
out if a newest software version is available at the
change the password for locked discs and Philips website that you may download and install on
play restricted DVDs. this unit.
Change Password
Old Password [ Default ]
New Password
Reset all the settings of this unit to factory
Confirm PWD default, except for [ Disc Lock ],
OK [ Password ] and [ Parental ] settings
remain unchanged.
1. Press the number buttons to
enter 0000 or your last set 4-digit
password at [ Old Password ] field.
2. Enter the new password at [ New
Password ] field.
3. Enter the new password again at
[ Confirm PWD ] field.
4. Press OK to exit the menu.
Note
If you forget your 4-digit password, enter 0000
before you set a new password.
EN 45
Preference Setup
Disc Menu
Parental Care
PBC
MP3/JPEG Nav
Caution!
Password
DivX Subtitle Never use solvents such as benzene, thinner,
cleaners available commercially, or anti-static sprays
Version Info
intended for discs.
Default
4 Go to www.philips.com/support to check
the latest software version available for this Clean main unit screen
unit. Wipe the screen surface with a micro fibre
cleaning cloth.
5 If the latest software version is higher than
the software version of this unit, download
it and store onto a CD-R or USB flash
drive
46 EN
English
AM/MW 530-1700 kHz (10 kHz)
Note 26 dB quieting sensitivity: FM 20 dBf, AM 4V/m
IF rejection ratio: FM 60 dB, AM 45 dB
Specification and design are subject to change
Signal-to-noise ratio: FM 60 dB, AM 40 dB
without notice.
Harmonic distortion: FM 3%, AM 5%
Frequency response: FM 180 Hz~10 kHz / 6dB
Additional information
Accessories supplied Stereo separation: FM 26 dB (1 kHz)
Quick Start Guide
Stereo Threshold: FM 23.5 dB
Remote control and batteries
2 Composite video cables
HDMI cable USB
3.5mm stereo audio cable Compatibility: Hi-Speed USB (2.0)
Power cable (for certain region only) Class support: UMS (USB Mass Storage Class)
Subwoofer
Wall mounting bracket and 2 wall mounting knobs iPod docking station
iPod docking station Dimensions (WxHxD): 34.5 x 104 (mm)
FM wire antenna / AM-MW loop antenna Weight: 163.5 g
Round-to-Flat pin adaptor (for certain region only)
Micro fibre cleaning cloth
Power (Subwoofer)
Power supply: 110-127V / 220-240V, ~50-60 Hz
Amplifier Power consumption: 120 W
Total output power (Home Theatre): 500W Standby power consumption:
Frequency response: 20 Hz - 20 kHz / 3dB Normal: < 3,5 W
Signal-to-noise ratio: > 65 dB (CCIR) Low standby: < 0.27 W
Input sensitivity System: Bass Reflex System
AUX 1: 500 mV Impedance: 4 ohm
MP3 LINK: 250 mV Speaker drivers: 165 mm (6 1/2) woofer
Frequency response: 35 Hz - 200 Hz
Disc Dimensions (WxHxD): 322 x 425 x 322 (mm)
Laser Type: Semiconductor Weight: 12.7 kg
Disc diameter: 12cm / 8cm
Video decording: MPEG1/ MPEG2 / DivX / Main unit
DIvX Ultra / WMV9 Dimensions (WxHxD): 1047 x 174 x 155 (mm)
Video DAC: 12 bits, 148 MHz Weight: 8.9 kg
Signal system: PAL / NTSC Centre speaker:
Video S/N: 56 dB Speaker impedance: 4 ohm
Audio DAC: 24 bits / 192 kHz Speaker drivers: 2x 2.5 woofer + 2 x 1 Soft
Frequency response: 4 Hz - 20 kHz (44.1 kHz) dome tweeter
4 Hz - 22 kHz (48 kHz) Frequency response: 200 Hz - 20 kHz
4 Hz - 44 kHz (96 kHz) Left/Right surround speakers:
PCM: IEC 60958 Speaker impedance: 6 ohm
Dolby Digital, DTS: IEC60958, IEC61937 Speaker drivers: 4x 2.5 full range
Frequency response: 200 Hz - 20 kHz
EN 47
Warning!
Risk of electric shock. Never remove the casing of
this unit.
To keep the warranty valid, never try to repair the system yourself.
If you encounter problems when using this unit, check the following
points before requesting service. If the problem remains unsolved,
register your product and get support at www.philips.com/welcome.
Main unit
The buttons on this unit do Disconnect this unit from the power outlet for a few minutes,
not work. then connect again.
Ensure that the interconnect cable from the subwoofer is
connected to the DVD Home Theatre unit.
Picture
No picture. Refer to your TVs manual for correct video input channel
selection. Change the TV channel until you see the DVD screen.
Press DISC.
If this happens when you turn on the progressive scan setting or
change the TV type setting, you have to switch to its default
mode:
1. Press Z to open the disc compartment.
2. Press B (for progressive scan) or b (for TV type).
3. Press SUBTITLE.
No picture on HDMI Check if the HDMI cable is faulty. Replace a new HDMI cable.
connection. If this happens when you change the HDMI video resolution,
press HDMI repeatedly until the picture appears.
48 EN
English
No sound. Ensure that the audio cables are connected and press the
correct input source (for example, AUX/DI /MP3 LINK, USB) to
select the device you want to play.
Troubleshooting
No sound on HDMI You may not hear any sound from the HDMI output if the
connection. connected device is non-HDCP compliant or only DVI-
compatible.
Ensure that the [ HDMI Audio ] setting is turned on.
No sound from TV Connect an audio cable from the AUDIO input on this unit to
programmes. the AUDIO output on your TV. Then press AUX/DI /MP3
LINK repeatedly to select the corresponding audio input source.
Play
DivX video files cannot be Ensure that the DivX file is encoded according to the Home
played. Theatre Profile with the DivX encoder.
Ensure that the DivX video file is complete.
DivX subtitle are not Ensure that the subtitle file name is the same as the movie file
displayed correctly. name.
Select the correct character set.
1. Press OPTIONS.
2. Press B, then select [ DivX Subtitle ] in the menu.
3. Select the character set that supports the subtitle.
The contents of the USB The USB flash drive format is not compatible with this unit.
flash drive cannot be read. Drive is formatted with different file system which is not
supported by this unit (e.g. NTFS).
Maximum size of memory supported is 160GB.
The video (movies, photos, Video browsing is not supported in Extended Control mode,
video clips, etc) contents of you can only browse the video contents on the iPod itself.
the iPod does not display in
Extended Control mode.
EN 49
50 EN