Академический Документы
Профессиональный Документы
Культура Документы
http://www.tooraj-sabzevari.blogfa.com
Chemical Grouting
and Soil Stabilization
i
Third Edition, Revised and Expanded
Reuben H. Karol
Rutgers University
New Brunswick, New Jersey, U.S.A.
EL
ISBN: 0-8247-4065-3
Headquarters
Marcel Dekker, Inc.
270 Madison Avenue, New York, NY 10016
tel: 212-696-9000; fax: 212-685-4540
The publisher offers discounts on this book when ordered in bulk quantities. For
more information, write to Special Sales/Professional Marketing at the headquarters
address above.
Neither this book nor any part may be reproduced or transmitted in any form or by
any means, electronic or mechanical, including photocopying, microlming, and
recording, or by any information storage and retrieval system, without permission in
writing from the publisher.
Editor
Michael D. Meyer
Department of Qvil and Environmental Engineering
Georgia Institute of Technology
Atlanta, Georgia
Over a decade has passed since publication of the second edition. During
this time the major changes have been the movement of chemical grouting
from remedial use to preventive use, and the development and growing use
of other methods of ground improvement. Although new grouts have been
developed, silicates and acrylics still dominate the domestic market.
Increasing sophistication in grouting equipment and procedures, as
well as in associated placement techniques, and the growing number of
organizations specifying and using chemical grouts, have resulted in the
broad acceptance of chemical grouting as a bona de construction tool.
The basics of chemical grouting remain largely unchanged and, with
appropriate modications and additions, occupy a major part of this
edition. Over the years of teaching grouting, I have found it desirable to
include information on other accepted procedures for soil modication and
stabilization (as well as some very recent innovations) in sufcient detail to
permit assessment of the place of grouting in the contractors arsenal of eld
procedures. Other ground improvement techniques are now discussed in
much greater detail than in the two previous editions.
This past decade has seen rapidly growing concern for the problems
caused by hazardous wastes. Containment of such wastes will demand more
and more attention in the coming years. Grouting and other procedures can
Reuben H. Karol
In the time since publication of the rst edition, many changes have
occurred involving the materials and practice of chemical grouting. First
and foremost has been the growing acceptance of chemical grouting as a
preventive measure, as well as a remedial measure. Together with this
acceptance has come a signicant increase in the number of small
contractors working with chemical grouts. This positive growth has been
fuelled by a better understanding of the properties and behavior of grouts,
and by a spread of general knowledge of how to exploit those properties.
These are the factors that have prompted the writing of a second edition of
this book. While the original material is still applicable, this edition expands
the various topics presented earlier, and adds new topics that have either
gained in importance or been developed since the publication of the rst
edition.
In Chapter 1, additional information has been given on competitive
methods: compressed air, freezing, and slurry walls. The subsection on
history has been updated and expanded. In Chapter 2, data has been added
to better dene soils for grouting purposes, and in Chapter 3, correlation
between theory and grouting acceptance is discussed.
Chapter 4 has been greatly expanded to include advances in
knowledge of existing grouts, as well as properties of new materials. More
emphasis is given to the silicates, still the major grout in the United States,
Reuben H. Karol
Reuben H. Karol
1. Introduction
1.1 General
1.2 Modication and Stabilization
1.3 Soil and Rock Sampling
1.4 Degree of Representation
1.5 Safety Factors
1.6 Permanence
1.7 Failure Criteria
1.8 Summary
1.9 General References
1.10 Problems
3. Compaction
3.1 Density Measurements
3.2 Shallow Compaction
3.3 Deep Compaction
3.4 Deep Dynamic Compaction
3.5 Preloading
3.6 Blasting
3.7 Summary
3.8 References
3.9 Problems
5. Ground Freezing
5.1 General
5.2 Refrigeration Systems
5.3 Shallow Applications
5.4 Deep Applications
5.5 Permanence
5.6 Summary
5.7 References
5.8 Problems
8. Biostabilization
8.1 Plantings
8.2 Microbial Stabilization
8.3 Summary
8.4 References
8.5 Problems