Вы находитесь на странице: 1из 6

Shell LIGHTING FIXTURES

Generic FPSO Document #: 3146-MI20-60S1-0080,


Rev. 0

TABLE OF CONTENTS
1.0 SCOPE.............................................................................................................................. 3
2.0 APPLICABLE CODES AND STANDARDS ..................................................................... 3
3.0 TECHNICAL SPECIFICATIONS ...................................................................................... 3
3.1 NORMAL FLUORESCENT LIGHTING FIXTURE ................................................. 3
3.2 FLOODLIGHT LIGHTING FIXTURE ..................................................................... 3
3.3 EMERGENCY FLUORESCENT LIGHTING FIXTURE WITH INTEGRAL
BATTERY BACK-UP ............................................................................................. 4
3.4 EXIT LIGHT ........................................................................................................... 5
3.5 NORMAL FLUORESCENT LIGHTING FIXTURE ................................................. 6

Page 2 / 6
Shell LIGHTING FIXTURES
Generic FPSO Document #: 3146-MI20-60S1-0080,
Rev. 0

1.0 SCOPE
This Specification covers the minimum requirement for supply of lighting fixtures. All
material furnished shall meet the design conditions as stated in this specification and shall be
new, free of defects and of the rating specified.

2.0 APPLICABLE CODES AND STANDARDS


All lighting fixtures shall be designed, manufactured and tested in accordance with the
relevant international codes and standards.

3.0 TECHNICAL SPECIFICATIONS

3.1 NORMAL FLUORESCENT LIGHTING FIXTURE


i) Type No.: 1
Description: Fluorescent type lighting fixtures with 2 x 36 watts bi-pins
equipped with reflector, guard and diffuser.
Installation: Pole mounting bracket (suitable for 50mm diameter pole) to be
provided for stanchion mounted, bracket mounted & ceiling
mounted
Supply Voltage: 220VAC
Supply Frequency: 60Hz
Area Classification: Class I, Zone 2, Gas Group IIA, Temperature Class T3
IP Rating: 67
Enclosure: Stainless steel body construction with clear polycarbonate cover
Cable Entry: 2 brass cable glands M20
Termination: 3C x 2.5mmsq conductor

3.2 FLOODLIGHT LIGHTING FIXTURE


i) Type no. 2
Description: Floodlight lighting fixtures with 1 x 400 watts High Pressure
Sodium Lamp equipped with 50 wide beam reflectors
Installation: Stirrup mounting bracket to be provided suitable for handrail
mounted and column mounted
Supply Voltage: 220VAC
Supply Frequency: 60Hz
Area Classification: Class 1, Zone 2, Gas Group IIA, Temperature Class T3
IP Rating: 67
Enclosure: Stainless steel deep drawn, seamless housing.
Cable Entry: 2 x Brass cable glands M20.

Page 3 / 6
Shell LIGHTING FIXTURES
Generic FPSO Document #: 3146-MI20-60S1-0080,
Rev. 0

Termination: 3C x 4mmsq conductor.

3.3 EMERGENCY FLUORESCENT LIGHTING FIXTURE WITH INTEGRAL


BATTERY BACK-UP
i) Type No.: 3A
Description: Emergency Fluorescent type lighting fixtures with 2 x 36 watts bi-
pins equipped with reflector, guard and diffuser.
Installation: Pole mounting bracket (suitable for 50mm diameter pole) to be
provided for stanchion mounted, bracket mounted and outdoor
ceiling mounted
Supply Voltage: 220VAC
Supply Frequency: 60Hz
Battery: Internal Ni-Cd battery suitable for extended emergency operation
for a duration of 90 minutes one lamp in operation
Area Classification: Class I, Zone 1, Gas Group IIA, Temperature Class T3
IP Rating: 67
Enclosure: Galvanized steel body construction with clear polycarbonate cover.
Cable Entry: 2 x Brass cable glands M20.
Termination: 3C x 2.5mmsq conductor

ii) Type No.: 3B


Description: Emergency Fluorescent type lighting fixtures with 2 x 36 watts bi-
pins equipped with reflector, guard and diffuser.
Installation: Indoor ceiling mounted
Supply Voltage: 220VAC
Supply Frequency: 60Hz
Battery: Internal Ni-Cd battery suitable for extended emergency operation
for a duration of 90 minutes with one lamp in operation
Area Classification: Class I, Zone 2, Gas Group IIA, Temperature Class T3
IP Rating: 67
Enclosure: Galvanized steel body construction with clear polycarbonate cover.
Cable Entry: 2 x Brass cable glands M20.
Termination: 3C x 2.5mmsq conductor

Page 4 / 6
Shell LIGHTING FIXTURES
Generic FPSO Document #: 3146-MI20-60S1-0080,
Rev. 0

iii) Type No.: 3C


Description: Emergency Fluorescent type lighting fixtures with 2 x 36 watts bi-
pins equipped with reflector, guard and diffuser.
Installation: Indoor ceiling mounted
Supply Voltage: 220VAC
Supply Frequency: 60Hz
Battery: Internal Ni-Cd battery suitable for extended emergency operation
for a duration of 90 minutes with one lamp in operation
Area Classification: Class I, Zone 2, Gas Group IIA, Temperature Class T3
IP Rating: 65
Enclosure: Galvanized steel body construction with clear polycarbonate cover.
Cable Entry: 2 x Brass cable glands M20.
Termination: 3C x 2.5mmsq conductor
iv) Type No.: 3D
Description: Emergency Fluorescent type lighting fixtures with 2 x 18 watts bi-
pins equipped with reflector, guard and diffuser.
Installation: Pole mounting bracket (suitable for 50mm diameter pole) to be
provided for stanchion mounted, bracket mounted and outdoor
ceiling mounted
Supply Voltage: 220VAC
Supply Frequency: 60Hz
Battery: Internal Ni-Cd battery suitable for extended emergency operation
for a duration of 90 minutes one lamp in operation
Area Classification: Class I, Zone 1, Gas Group IIA, Temperature Class T3
IP Rating: 67
Enclosure: Galvanized steel body construction with clear polycarbonate cover.
Cable Entry: 2 x Brass cable glands M20.
Termination: 3C x 2.5mmsq conductor

3.4 EXIT LIGHT


i) Type no. 4
Description: Self-contained completely sealed, Explosion Proof & Waterproof,
illumination with life of 20 years, requires no internal or external
wiring supply.
Installation: Ceiling, end or back mounted
Area Classification: Class I, Zone 1, Gas Group IIA, Temperature Class T3
Enclosure: High impact, ABS fire-retardant case.

Page 5 / 6
Shell LIGHTING FIXTURES
Generic FPSO Document #: 3146-MI20-60S1-0080,
Rev. 0

3.5 NORMAL FLUORESCENT LIGHTING FIXTURE


i) Type No.: 5
Description: Fluorescent type lighting fixtures with 2 x 36 watts bi-pins
equipped with reflector, guard and diffuser.
Installation: Indoor ceiling mounted
Supply Voltage: 220VAC
Supply Frequency: 60Hz
Area Classification: Class I, Zone 2, Gas Group IIA, Temperature Class T3
IP Rating: 23
Enclosure: Galvanized steel body construction with opal acrylic cover
Cable Entry: 2 brass cable glands M20
Termination: 3C x 2.5mmsq conductor

Page 6 / 6

Вам также может понравиться