Академический Документы
Профессиональный Документы
Культура Документы
Safety
Full lift safety valve with spring loading (AIT)
EP AP ES CP EP AP ES CP
The valve works as an automatic pressure releasing The valve works as an automatic pressure releasing
regulator activated by the static pressure existing at the regulator activated by the static pressure existing at the
entrance to the valve and is characterized by its ability entrance
to open instantly and totally. to the valve and is characterized by its ability to open
Design in accordance with International Standard ISO instantly and totally.
4126-1 Safety Valves. Design in accordance with International Standard ISO
4126-1 Safety Valves.
-60C to +450C 0,20 bar to 40,00 bar Steam / Gases / Liquids -60C to +450C 0,20 bar to 40,00 bar Steam / Gases / Liquids
Safety
EP AP ES CP EP AP ES CP
Connection: Flange x Flange Connection: Female thread NPT x Female thread NPT
NPS1 x NPS2: 1x 2 to 8x10 FNPT1 x FNPT2: 3/4x1 1/4 and 1x1 1/2
Material: Carbon steel. 150 lbs and 300 lbs Material: Carbon steel. 300 lbs
Stainless steel. 150 lbs and 300 lbs Stainless steel. 300 lbs
Seal: Metal Seal: Metal
The valve works as an automatic pressure releasing The valve works as an automatic pressure releasing
regulator activated by the static pressure existing at the regulator activated by the static pressure existing at the
entrance to the valve and is characterized by its ability to entrance to the valve and is characterized by its ability to
open instantly and totally. open instantly and totally.
Design in accordance with ASME code section VIII Design in accordance with ASME code section VIII
Div.1. Div.1.
Materials according ASME code section II and ASTM. Materials according ASME code section II and ASTM.
Connections according ASME/ANSI B16.5 standard. Connections according ASME B1.20.1 standard.
Center to face dimensions according API-526.
Depending on version Depending on version
-20,2F to +842F 2,90 psi to 580,15 psi Steam / Gases / Liquids -20,2F to +842F 2,90 psi to 580,15 psi Steam / Gases / Liquids
Safety
Full lift safety valve with spring loading (AIT)
EP AP ES CP EP AP ES
The valve works as an automatic pressure releasing The valve works as an automatic pressure releasing
regulator activated by the static pressure existing at the regulator activated by the static pressure existing at the
entrance to the valve and is characterized by its ability entrance to the valve and is characterized by its ability
to open instantly and totally. to open instantly and totally.
Design in accordance with International Standard ISO Design in accordance with International Standard ISO
4126-1 Safety Valves. 4126-1 Safety Valves.
-60C to +450C 0,20 bar to 62,00 bar Steam / Gases / Liquids -60C to +450C 0,20 bar to 95,00 bar Steam / Gases / Liquids
Safety
CP EP AP ES AS EP AP ES AS
Connection: Male thread x Female thread Connection: Male thread NPT x Female thread NPT
MR1 x FR2: 3/8x1/2 to 1x1 MNPT1 x FNPT2: 3/8x1/2 to 1x1
Material: Bronze. PMS-36 bar Material: Bronze. PMS-522,14 psi
Stainless steel. PN-40 Stainless steel. 300 lbs
Seal: PTFE (Teflon) Seal: PTFE (Teflon)
Silicone's rubber Silicone's rubber
Fluorelastomer (Viton) Fluorelastomer (Viton)
The valve works as an automatic pressure The valve works as an automatic pressure releasing
releasing regulator activated by the static regulator activated by the static pressure existing at
pressure existing at the entrance to the valve the entrance to the valve and is characterized by its
and is characterized by its ability to open ability to open instantly and totally.
instantly and totally. Design in accordance with ASME code section VIII
Design in accordance with International Div.1.
Standard ISO 4126-1 Safety Valves. Materials according ASME code section II and
ASTM. Connections according ASME B1.20.1
standard.
Depending on version Depending on version
-60C to +200C 0,20 bar to 36,00 bar Steam / Gases / Liquids -76F to +392F 2,90 psi to 522,14 psi Steam / Gases / Liquids
Safety
Full lift safety valve with spring loading (AIT)
EP AP ES AS EP AP ES AS
Connection: Male thread x Female thread Connection: Male thread NPT x Female thread NPT
MR1 x FR2: 3/8x1/2 to 1x1 MNPT1 x FNPT2: 3/8x1/2 to 1x1
Material: Bronze. PMS-36 bar Material: Bronze. PMS-522,14 psi
Stainless steel. PN-40 Stainless steel. 300 lbs
Seal: PTFE (Teflon) Seal: PTFE (Teflon)
The valve works as an automatic pressure releasing The valve works as an automatic pressure releasing
regulator activated by the static pressure existing at the regulator activated by the static pressure existing at the
entrance to the valve and is characterized by its ability entrance to the valve and is characterized by its ability
to open instantly and totally. to open instantly and totally.
Design in accordance with International Standard ISO Design in accordance with ASME code section VIII
4126-1 Safety Valves. Div.1.
Materials according ASME code section II and ASTM.
Connections according ASME B1.20.1 standard.
Depending on version Depending on version
-196C to +200C 0,20 bar to 36,00 bar Steam / Gases / Liquids -320,8F to +392F 2,90 psi to 522,14 psi Steam / Gases / Liquids
Safety
EP AP ES AS EP AP ES AS EP AP ES AS
Connection: Male thread x Female thread Connection: Male thread NPT x Connection: Flange clamp x Flange clamp
MR1 x FR2: 3/8x1/2 and 1/2x1/2 Female thread NPT DN1 x DN2: 10 x15 to 25 x 25
Material: Stainless steel. PN-160 MNPT1 x FNPT2: 3/8x1/2 and 1/2x1/2 Material: Stainless steel. PN-16
Seal: PTFE (Teflon) Material: Stainless steel. 900 lbs Seal: PTFE (Teflon)
Silicone's rubber Seal: PTFE (Teflon) Silicone's rubber
Fluorelastomer (Viton) Silicone's rubber Fluorelastomer (Viton)
Fluorelastomer (Viton)
The valve works as an automatic pressure The valve works as an automatic pressure releasing The valve works as an automatic pressure releasing
releasing regulator activated by the static regulator activated by the static pressure existing at regulator activated by the static pressure existing at
pressure existing at the entrance to the valve the entrance to the valve and is characterized by its the entrance to the valve and is characterized by its
and is characterized by its ability to open ability to open instantly and totally. ability to open instantly and totally.
instantly and totally. Design in accordance with ASME code section VIII Design in accordance with ASME code section VIII
Design in accordance with International Div.1. Div.1.
Standard ISO 4126-1 Safety Valves. Materials according ASME code section II and ASTM. Materials according ASME code section II and
Connections according ASME B1.20.1 standard. ASTM. Connections according ISO 2852 standard.
Depending on version Depending on version Depending on version
-60C to +200C 0,20 bar to 144,00 bar Gases -76F to +392F 2,90 psi to 2.088,57 psi Gases -60C to +200C 0,20 bar to 16,00 bar Steam / Gases / Liquids
Safety
Normal safety valve Controlled safety pressure
with spring loading (AN) relief System CSPRS
EP AP ES CP
The valve works as an automatic pressure releasing Controlled safety pressure relief system CSPRS valves are mainly
regulator activated by the static pressure existing at the used where conventional direct-loaded spring action valves cannot
entrance to the valve and is characterized by its ability to guarantee the opening and closing margins that certain specific
open, at the first proportional to the pressure increase, conditions of service demand.
and afterinstantly and totally. The objective is to help the closure by means of pressure so that the
Design in accordance with International Standard ISO valve remains completely watertight until reaching the set pressure
4126 -1 Safety Valves. and/or to activate the opening with pressure. Once evacuated and in
keeping with a previous adjustment, to assist with closing pressure,
Depending on version to once again achieve closure with the desired watertightness.
The control safety pressure relief system CSPRS device can be used
with any safety valve available in the market and in particular, with
models VYC Mod. 485, 486, 494, 495 and 496.
Safety
Normal safety valve with spring loading (AN)
AP ES AP ES
The valve works as an automatic pressure releasing The valve works as an automatic pressure releasing
regulator activated by the static pressure existing at the regulator activated by the static pressure existing at the
entrance to the valve and is characterized by its ability entrance to the valve and is characterized by its ability
to open, at the first proportional to the pressure increase, to open, at the first proportional to the pressure increase,
and after instantly and totally. and after instantly and totally.
Design in accordance with International Standard ISO Design in accordance with International Standard ISO
4126 -1 Safety Valves. 4126 -1 Safety Valves.
-60C to +250C 0,20 bar to 25,00 bar Steam / Gases / Liquids -60C to +250C 0,20 bar to 25,00 bar Steam / Gases / Liquids
Safety
Proportional safety valve with spring loading (AP)
AP ES AP ES
The valve works as an automatic pressure releasing The valve works as an automatic pressure releasing
regulator activated by the static pressure existing at the regulator activated by the static pressure existing at the
entrance to the valve and is characterized by its ability entrance to the valve and is characterized by its ability
to open proportional to the pressure increase. to open proportional to the pressure increase.
Design in accordance with International Standard ISO Design in accordance with International Standard ISO
4126-1 Safety Valves. 4126-1 Safety Valves.
-60C to +250C 0,20 bar to 25,00 bar Steam / Gases / Liquids -60C to +250C 0,20 bar to 25,00 bar Steam / Gases / Liquids
Safety
Vacuum breaker safety valve Vacuum breaker safety valveMulti-stage diffusion silencers
Connection: Male thread x Free admision Connection: Male thread NPT x Free admision Connection: Flange
MR1 x 6B: 3/8x6B to 1x6B MNPT1 x 6B: 3/8x6B to 1x6B Male thread GAS
Material: Brass. PN-16 Material: Brass. 150 lbs Female thread GAS
Stainless steel. PN-16 Stainless steel. 150 lbs Male thread NPT
Seal: Silicone's rubber Seal: Silicone's rubber Female thread NPT
Fluorelastomer (Viton) Fluorelastomer (Viton) SW welding end
DN: To be agreed
R: To be agreed
Material: Carbon steel
The valve acts as an automatic regulator of The valve acts as an automatic regulator of During the expansion process for compressible
pressure drops and prevents the creation of pressure drops and prevents the creation of substances such as gases, steam or air, one of
a vacuum inside pressurised installations or a vacuum inside pressurised installations or the main problems is noise pollution. The noise
vessels. vessels. is caused by opening the valve and discharging
the expanded fluid at the speed of sound.
Silencers are a great way to reduce this noise,
caused by discharging the valve, bringing it
down to allowable levels.
Depending on version They are used in places such as power,
Depending on version chemical and petrochemical plants to discharge
safety valves, control valves, etc. in pressure
lines and equipment that convey compressible
substances such as steam, air, carbon dioxide,
-50C to +150C -0,05 bar to -0,40 bar Gases -58F to +302F -0,73 psi to -5,80 psi Gases helium, methane, nitrogen, oxygen and other
gases.
They achieve noise reductions of more than 50
dB without any additional acoustic absorption
materials.
Depending on version
Connection: For placing between flanges Connection: For placing between flanges
DN: 15 to100 DN: 125 to 300
Material: Bronze. PN-16 Material: Cast iron. PN-16
Cast steel. PN-40 Bronze. PN-16
Stainless steel. PN-40 Cast steel. PN-40
Seal: Metal Stainless steel. PN-40
Seal: Metal
Disc check valve with centering ring for placing Disc check valve with centering ring for placing
between flanges in accordance with DIN, UNE, between flanges in accordance with DIN, UNE,
ANSI, BS, etc. DN -15 to 100. ANSI, BS, etc. DN -125 to 300.
Face-to-face dimmensions in accordance with EN- Face-to-face dimmensions in accordance with EN-
558, basic series 49. 558, basic series 49 and 51.
-60C to +400C 40,00 bar Steam / Gases / Liquids -60C to +400C 40,00 bar Steam / Gases / Liquids
Steam traps
Steam traps
Piston check valve Thermodynamic steam trap
Check
Female thread NPT Female thread NPT
Socket welding ends SW Socket welding ends SW
R: 1/4 to 2 R: 1/2 to 1
Material: Brass. PN-200 Material: Stainless steel. PMA. 63 bar
Cast steel. PN-250 Seal: Metal
Stainless steel. PN-250
Seal: Metal
Connection: Female thread GAS Connexion: Female thread GAS Connection: Female thread GAS
Female thread NPT Female thread NPT Female thread NPT
R: 1/2 to 1 R: 1/2 to 1 Socket welding ends SW
Material: Cast iron. PMS-14 bar Matriel: Cast iron. PN-16 R: BP 1/2 and 3/4
Seal: Metal Seal: Metal MP 1/2 and 3/4
AP 1/2 to 1
Material: Cast steel. BP. PN-40
Mod. 243 EN Cast steel. MP. PN-40
ASME/FNPT ASME/SW Cast steel. AP. PN-100
Connection: Female thread GAS Seal: Metal
Female thread NPT
Socket welding ends SW Mod. 144 EN
R: 1/2 to 1, 1 1/2 and 2
ASME/ANSI
Material: Cast steel. PMS-14 bar
Seal: Metal Connection: Flange x Flange
Mod. 244 EN DN: BP 15 to 25
MP 15 to 25
ASME/ANSI AP 15 to 25
Connection: Flange x Flange Material: Cast steel. BP. PN-40
DN: 15 to 25, 40 and 50 Cast steel. MP. PN-40
Material: Cast steel. PMS-14 bar Cast steel. AP. PN-100
Seal: Metal Seal: Metal
To extract saturated or super-heated low-
pressure steam condensates.
To extract saturated or super-heated medium or low- Applicable to: steam piping, heat
pressure steam condensates. exchangers, plants with automatic
Applicable to: steam piping, heat exchangers, plants temperature control, etc., in the For the extraction of steam condensates.
with automatic temperature control, etc., in the chemical chemical and petrochemical industries, Applicable in: steam piping, heat exchangers,
and petrochemical industries, etc. etc. chemical and petrochemical industries,... etc.
+220C 14,00 bar Steam +220C 16,00 bar Steam +450C 80,00 bar Steam
Steam traps
Thermostatic steam trap Ultrasonic leak detector
To detect leaks:
Mod. 543 EN ASME/FNPT In condensate purgers.
In valve seals.
Connection: Female thread GAS
Female thread NPT Checking for wear on bearings.
Solving mechanical problems in general.
R: 1/2 Ultrasound is directional and localisable. In a noisy environment
Material: Stainless steel. PMS-22 bar we can remove or block the distorting ultrasounds.
Seal: Metal During preventive maintenance, we should place the stethoscope
properly and we will detect, audibly and visually, the
To extract saturated or super-heated medium or low-pressure steam leaks that are affecting us. We can take corrective action,
condensates. safeguarding the environment, saving energy, time and
Applicable to: steam piping, irons, laundries, vessels with consequently money.
condensate discharge, cooking pots, sterilizers, heat exchangers,
multiple dish presses, vulcanizing autoclaves, calenders, pressure It meets and exceeds the requirements of ASTM E1002-2005 for
reducing equipment, etc. Leak Detection.
Depending on version Depending on version
For steam and gases. (For liquids, consult our In installations with steam, the steam can be mixed with cold
technical department). water to obtain instant hot water in the most economical way.
Suitable for application in: ironing machines, Can be used in packaging plants, dairies, detergent plants,
laundries and dry cleaners, cooking vats, textile slaughterhouses, meat processing plants, hospitals,... etc.
machinery, drying cylinders, autoclaves, steam For cleaning floors, vehicles, toilets, tanks, filters,... etc.
ovens, distilleries, heat exchangers, the food In the manufacture of food, chemical, paper and tannery pro-
industry, chemical laboratories, etc. ducts,... etc.
Depending on version Depending on version
-60C to +230C 1,40 bar to 17,00 bar Steam / Gases / Liquids +82C 28,00 bar Liquids
Float-Buoys
Float-Buoys
Float valve Buoys
Reducing-Mixng
DN: 15 to 65 Flat:
Material: Stainless steel. PN-16 150x60. Female thread. M10
Seal: Silicone's rubber 150x60. Sliding (8 mm. internal)
200x80 & 250x95. Female thread. M10
300x115 & 350x130. Female thread. M12
Cylindrical:
40x50. Male thread. M4
40x50. Sliding (4 mm. internal)
60x120. Female thread. M6. (With or without Epoxi coating)
Prevents breakdowns and misalignments in pressure For liquids, gases and steam.
gauges. For use in hydraulic, pneumatic, heating and steam systems,
Absorbs abrupt pressure changes or water hammer chemical and food industries, etc.
which cause malfunctioning pressure gauges.
Isolates the pressure gauge from extreme temperatures
by creating thermal isolation space.
If working with steam, ensure that the pressure gauge
is activated by water condensation and not by steam.
-60C to +400C 51,70 bar Steam/Gases/Liquids -60C to +400C 250,00 bar Steam/Gases/Liquids
Bleeding
Bleeding for steam
boilers
Blowdown valve for bleeding dirt and sludge
For steam boilers
Instrumentation
Connection: Flange x Flange Connection: Flange x Flange
DN: 25 to 50 DN: 20 to 50
Material: Cast steel. PN-40 Material: Cast steel. PN-40
Seal: Metal Seal: Metal
The water in the boiler contains salts, which are The water in the boiler contains salts, which are
built up by the continuous evaporation. If these built up by the continuous evaporation. If these
salts are not eliminated, bubbles and foam are salts are not eliminated, bubbles and foam are
formed when the density of the water increased. formed when the density of the water increased.
To prevent these lime deposits forming, the To prevent these lime deposits forming, the
water supply must be suitably treated, with the water supply must be suitably treated, with the
result that certain salts are changed producing result that certain salts are changed producing
impurities which form sludge and encrusted impurities which form sludge and encrusted
deposits which then adhere to the sides or the deposits which then adhere to the sides or the
bottom of the boiler and to the combustion bottom of the boiler and to the combustion
tubes, together with particles of dirt, remains tubes, together with particles of dirt, remains
of electrodes, carbonic acid, oxygen, etc. This of electrodes, carbonic acid, oxygen, etc. This
leads to a high level of rust which may: leads to a high level of rust which may:
-Destroy the metal plate of the boiler, causing -Destroy the metal plate of the boiler, causing
high maintenance costs. high maintenance costs.
-Produce thermic voltages, causing cracks in -Produce thermic voltages, causing cracks in
the metal plate and soldering cord. the metal plate and soldering cord.
-Notably slow down thermic transmission, -Notably slow down thermic transmission,
meaning an unnecessary and excessive meaning an unnecessary and excessive
consumption of fuel. consumption of fuel.
Depending on version Depending on version
The water in the boiler contains salts, which are built up by the The continuous desalting valve is used to empty an adjustable
continuous evaporation. If these salts are not eliminated, bubbles quantity of water from the steam boiler, removing:
and foam are formed when the density of the water increased. - Organic matter and mineral salts in solution. (Calcium,
To prevent these lime deposits forming, the water supply must magnesium, sodium, potassium, iron, bicarbonate ions,
be suitably treated, with the result that certain salts are changed chlorides, sulphates, nitrates, ...etc.).
producing impurities which form sludge and encrusted deposits - Solid materials in suspension. (Sand, clay, metal residues, rock
which then adhere to the sides or the bottom of the boiler and to residues, organic matter, ...etc.).
the combustion tubes, together with particles of dirt, remains of The continuous bleeding process prevents:
electrodes, carbonic acid, oxygen, etc. This leads to a high level - Damage caused by erosion and perforation, entailing the
of rust which may: following high costs:
-Destroy the metal plate of the boiler, causing high maintenance - Direct: Replacement or repair of materials.
costs. - Indirect: Stoppages, product losses, ...etc.
-Produce thermic voltages, causing cracks in the metal plate and - Danger of boiler explosion.
soldering cord. And reduces:
-Notably slow down thermic transmission, meaning an - Incrustations and sediments caused by precipitation of calcium
unnecessary and excessive consumption of fuel. and magnesium salts, which obstruct thermic transmission and
which cause unnecessary and excessive fuel consumption.
- Foam formation caused by excessive saline concentration,
with its corresponding drag.
I F D
This device guarantees automatic, safe and reliable control, regulation This device guarantees automatic, safe and reliable control, regulation
and signalling of the level of liquids in: wells, tanks, cisterns, etc. and signalling of the level of liquids in: steam boilers, pressurised vessels,
preheaters, processes, etc.
-60C to +150C 19,00 bar Liquids -60C to +300C 16,00 bar Steam/Liquids
This device guarantees a safe and reliable control, regulation and electronic This device, when combined with a motorised valve, ensures the
signalling of the level of electrically conducting liquids in: steam and hot continuous control and display of the level, with a high and low level
water boilers, autoclaves, preheaters, pressure vessels, feedwater and alarm for: steam and hot water boilers, autoclaves, pre-heaters,
condensates tanks, processes, etc. pressured vessels, condensation and feedwater tanks, processing,
etc.
Applicable to steam boilers in accordance with TRD-602, TRD-604
(24/72 hours) and EN-12953 Part 6 (24 hours).
Depending on version Depending on version
Model 366
Level indicators
DN: 20 and 25 DN: 20 and 25
Material: Cast steel. PN-16 Material: Cast steel. PN-16
Cast steel. PN-40 Cast steel. PN-40
Stainless steel. PN-40 Stainless steel. PN-40
Seal: Metal Seal: Metal
Blowoff valve: Mod. 999 3/8 with simple joint plug
Box n: 0 to X Box n: 0 to X
Material: Cast steel. PN-16. PN-40 Material: Cast steel. PN-16. PN-40
Stainless steel. PN-40 Stainless steel. PN-40
Blowoff valve: Mod. 999 3/8 with simple joint plug
For use in boilers, receivers, cisterns, reservoirs, ...etc., to For use in boilers, receivers, cisterns, reservoirs, ...etc., to
control the level of liquids, gases and steam. control the level of liquids, gases and steam.
A multiple-slot polyprismatic viewer allows the level to be A multiple-slot polyprismatic viewer allows the level to be
optically read, clearly differentiating liquid and gas phases from optically read, clearly differentiating liquid and gas phases from
liquid ones. liquid ones.
Depending on version Depending on version
-60C to +400C 40,00 bar Steam/Gases/Liquids -60C to +400C 40,00 bar Steam/Gases/Liquids
Level indicators
Window Sight glasses
Reflection and transparency glasses Mica shield
For level indicator box For level indicator box
Type:
Reflection: A 5 prisms 0 to IX Type: A I to X
B 5 prisms 0 to IX B/H I to X
H 5 prisms 0 to IX Material: Natural muscovite mica
Transparency: A V to IX
B V to IX
H V to IX
Material: Borosilicate
Klingerit cardboard type (Joint)
Graphite (Joint)
For visual checking of the level of liquids in all types of In combination with transparent glasses the life of these is
vessel, including those under pressure, in special thermal increased when working at high pressures and temperatures.
and chemical conditions. Also for checking processes. Also, they are protected from erosion, which results from
The quality of the sight glass satisfies the most demanding the effects of the corrosive chemical components, alkaline
safety standards and industry guarantees in general. solutions, boiler water, steam, caustic products, hydrofluoric
acids, hot and concentrated phosphoric acids, sodium and
potassium hydroxides and other contaminating, viscous or
corrosive media.
Applicable in level indicators for electrical generation plants,
thermal power plants, petroleum refineries, petrochemical
plants, pressure vessels, fertilizers, sugar refining plants, paper
mills,... etc..
Depending on version Depending on version
Mod. 999 EN
Level indicators
R: 3/8 and 1/2
Material: Brass. PN-25
Seal: PTFE (Teflon)-Metal
Simple plug
Connection: Male thread x Tube 12/10
and 15/13 mm.
R: 3/8 and 1/2
Material: Cast steel
Stainless steel
Sleeve
Connection: Male thread
R: 3/8 and 1/2
Material: Cast steel
Depending on version