Академический Документы
Профессиональный Документы
Культура Документы
EC Deptt.
Fourth Year
HI-TECH INSTITUTE OF ENGG. & TECHNOLOGY
So it is necessary to have some systems which perform serial I/O
operation between PC and out side device using optical fiber link. And
exactly link-b fulfills this need. It provides the simplest and powerful
way for serial communication flexibility through optical fiber. It is very
easy to install and use. Also one can enhance its flexibility through
software.
1.3 FUNCTION OF MAX 232 (RS-232 TRANCEIVER):
The computer communicates from serial com port which is at RS232C
levels i.e. at 12V. Transceiver max 232 performs the function of
converting RS232C signals to TTL levels & vice versa.
1.4 HARDWARE SETTINGS:
Switch off the power supply of PC. To perform this experiment the com
ports of PC are used. On board 9 pin d-type (female) connectors are
provided for interfacing with the PC. Two 9-pin cables with end
clamped with 9-pin d-type female connectors and the other end
connected to 9-pin d-type male connector are provided with this kit.
Connect d-type female connector end of one cable to one of the com
ports of PC and the 9-pin d-type connector end to CN6. Similarly
connect other cable to other port & CN7.
1.5 EQUIPMENTS:
a)Link b kit with power supply.
b)Patch cords.
c)1 meter fiber cable.
d)9 pin d connector cable – 2 nos.
e)Computers- PC, PC/XT, 386 or 486 – 2 nos. (Minimum).
2