Академический Документы
Профессиональный Документы
Культура Документы
Order in Council
Present:
His Excellency the Governor-General in Council
Pursuant to sections 54 and 54A of the Gas Act 1992, His Excellency
the Governor-General makes the following regulations, acting
(a) on the advice and with the consent of the Executive Council;
and
(b) on the recommendation of the Minister of Energy and Re-
sources made after consulting the Environmental Protection
Authority in accordance with section 54(6) of the Gas Act
1992.
Contents
Page
1 Title 3
2 Commencement 3
3 Principal regulations amended 3
4 Interpretation 3
5 General rules for when things deemed to be unsafe 5
6 Additional rules for when gas installations deemed to be 5
unsafe
1
Gas (Safety and Measurement) Amendment
Regulations 2011 2011/371
2
Gas (Safety and Measurement) Amendment
2011/371 Regulations 2011 r 4
Regulations
1 Title
These regulations are the Gas (Safety and Measurement)
Amendment Regulations 2011.
2 Commencement
These regulations come into force on 10 November 2011.
4 Interpretation
(1) Regulation 3(1) is amended by revoking the definition of ac-
credited auditor and substituting the following definition:
3
Gas (Safety and Measurement) Amendment
r4 Regulations 2011 2011/371
4
Gas (Safety and Measurement) Amendment
2011/371 Regulations 2011 r 7
5
Gas (Safety and Measurement) Amendment
r8 Regulations 2011 2011/371
6
Gas (Safety and Measurement) Amendment
2011/371 Regulations 2011 r 12
7
Gas (Safety and Measurement) Amendment
r 13 Regulations 2011 2011/371
8
Gas (Safety and Measurement) Amendment
2011/371 Regulations 2011 r 14
9
Gas (Safety and Measurement) Amendment
r 14 Regulations 2011 2011/371
10
Gas (Safety and Measurement) Amendment
2011/371 Regulations 2011 r 15
11
Gas (Safety and Measurement) Amendment
r 16 Regulations 2011 2011/371
17 Specified fittings
(1) Regulation 64(1) is amended by omitting certified in accord-
ance with regulation 55 or endorsed by an approved practi-
tioner in accordance with regulation 57 and substituting cer-
tified under regulation 54 or endorsed by an approved practi-
tioner under regulation 57.
(2) Regulation 64 is amended by revoking subclause (2) and sub-
stituting the following subclause:
(2) The notice
(a) must specify whether the specified fittings may be en-
dorsed under regulation 57 instead of certified under
regulation 54; and
(b) may specify a time, as an alternative to the time referred
to in regulation 55(1)(c), at which a certification must be
valid.
12
Gas (Safety and Measurement) Amendment
2011/371 Regulations 2011 r 21
13
Gas (Safety and Measurement) Amendment
r 22 Regulations 2011 2011/371
14
Gas (Safety and Measurement) Amendment
2011/371 Regulations 2011 r 28
27 Regulation 94 revoked
Regulation 94 is revoked.
15
Gas (Safety and Measurement) Amendment
r 29 Regulations 2011 2011/371
16
Gas (Safety and Measurement) Amendment
2011/371 Regulations 2011 r 31
17
Gas (Safety and Measurement) Amendment
r 32 Regulations 2011 2011/371
32 Schedule 1 amended
Schedule 1 is amended as set out in Schedule 1 of these regu-
lations.
Schedule 1 r 32
Schedule 1 amended
1 Omit the item relating to AS 3645:2010.
2 Item relating to AS/NZS 4645: add including Amendments
1, 2, and A.
3 Item relating to NZS 5263: omit NZS 5262:2003 and sub-
stitute NZS 5263:2003.
4 Insert the following items in their appropriate alphanumeric
order:
NZS 5255 New Zealand Standard known as NZS 5255
(Int):2011 (Safety verification of existing gas instal-
lations)
NZS 5266 New Zealand Standard known as NZS 5266
(Int):2011 (Safety of gas appliances)
NZS/AS New Zealand Standard known as NZS/AS 3645:2010
3645:2010 (Essential requirements for gas equipment Part 1 and
Part 2)
18
Gas (Safety and Measurement) Amendment
2011/371 Regulations 2011 Schedule 2
Schedule 2 r 33
New Schedule 2A inserted
Schedule 2A r 55
Certification requirements
Contents
Page
1 Bodies that may certify gas appliances and specified 19
fittings
2 Standards and conditions applying to certification by 20
bodies working within EU Directive 2009/142/EC or EU
Directive 90/396/ECC
3 Standards and conditions applying to certification 24
by Canadian Standards Association or Underwriters
Laboratories
4 Standards and conditions applying to certification by 27
SAI Global, IAPMO R & T Oceana, or Australian Gas
Association
5 Standards applying to certification by bodies accredited 30
by JAS-ANZ (New Zealand regime)
19
Gas (Safety and Measurement) Amendment
Schedule 2 Regulations 2011 2011/371
Schedule 2Acontinued
20
Gas (Safety and Measurement) Amendment
2011/371 Regulations 2011 Schedule 2
Schedule 2Acontinued
21
Gas (Safety and Measurement) Amendment
Schedule 2 Regulations 2011 2011/371
Schedule 2Acontinued
22
Gas (Safety and Measurement) Amendment
2011/371 Regulations 2011 Schedule 2
Schedule 2Acontinued
23
Gas (Safety and Measurement) Amendment
Schedule 2 Regulations 2011 2011/371
Schedule 2Acontinued
24
Gas (Safety and Measurement) Amendment
2011/371 Regulations 2011 Schedule 2
Schedule 2Acontinued
25
Gas (Safety and Measurement) Amendment
Schedule 2 Regulations 2011 2011/371
Schedule 2Acontinued
26
Gas (Safety and Measurement) Amendment
2011/371 Regulations 2011 Schedule 2
Schedule 2Acontinued
27
Gas (Safety and Measurement) Amendment
Schedule 2 Regulations 2011 2011/371
Schedule 2Acontinued
28
Gas (Safety and Measurement) Amendment
2011/371 Regulations 2011 Schedule 2
Schedule 2Acontinued
29
Gas (Safety and Measurement) Amendment
Schedule 2 Regulations 2011 2011/371
Schedule 2Acontinued
30
Gas (Safety and Measurement) Amendment
2011/371 Regulations 2011 Schedule 2
Schedule 2Acontinued
31
Gas (Safety and Measurement) Amendment
Schedule 3 Regulations 2011 2011/371
Schedule 3 r 34
New Schedule 6 substituted
Schedule 6 r 72(2)(a), (e)
Gas safety compliance labels
32
Gas (Safety and Measurement) Amendment
2011/371 Regulations 2011 Explanatory note
Rebecca Kitteridge,
Clerk of the Executive Council.
Explanatory note
This note is not part of the regulations, but is intended to indicate
their general effect.
These regulations, which come into force on 10 November 2011,
amend the Gas (Safety and Measurement) Regulations 2010. The
amendments
update references to standards so that they remain current and
enable those in the industry to use the latest practices, technol-
ogy, and products:
recognise certification of gas appliances and specified fittings
by certification bodies in other jurisdictions, and specify the
standards and conditions that apply to gas appliances and spe-
cified fittings certified by those bodies:
make a number of minor and technical changes to improve the
clarity and usability of the regulations.
Issued under the authority of the Acts and Regulations Publication Act 1989.
Date of notification in Gazette: 13 October 2011.
These regulations are administered by the Ministry of Economic Development.
12
33