Академический Документы
Профессиональный Документы
Культура Документы
MD SOHEL KHAN
For a double rapier loom, two rapiers enter the shed from
opposite sides of the loom and transfer the weft from one
rapier head to the other near the centre of the loom
The rapier enters the shed from one side, picks up the tip of the weft yarn
on the other side and passes it across the weaving machine while retracting
Single rapier carries the yarn in one way only and half of the rapier
movement is wasted
One-sided weft insertion. One rapier is the transmitting rapier the other
In a twin-rapier system, two rapiers move together from the same driving
source, as is necessary in face-to-face (i.e., double-plush) weaving
Double Rigid Rapier
Mechanism of Rapier loom
A rapier is a rod or steel tape which carries the weft
yarn. In the other end, the rapier connected to the
control system.
The rapier moves through the warp yarn by carrying
weft yarn from one end to other.
There are two types of rapier loom. One types of rapier
loom consist a rapier in one end.
The rapier is then retracted, leaving the new filling in the
place.
Other types of rapier also available, in which the rapier
carries the weft yarn to the centre and the other rapier
from the opposite side carries the weft yarn from the
centre.
Continued.