Академический Документы
Профессиональный Документы
Культура Документы
All rights reserved. No parts of this document may be reproduced or copied in any form or by any
means without written permission from Sandvik. All data and information in this manual may be
changed without further notice. Reservation for misprints.
Spare Parts
Introduction
Ordering Procedure:
To ensure correct delivery of your replacement part when ordering please quote:
a. Machine, Model and Serial Number
b. Year of Manufacture
c. Actual Part Number
d. Part Description
e. Illustration Reference Number and Page Number
f. Quantity Required
This information will enable us to supply the part with a minimum of delay.
1 14
6
13 , 13A
15
16
19
11 3
5
7 9
9 18
2
7 12 5
17 8
3
10
4
QH331-15-75-00 REV D
14 B16520000 TIER IV PP BULKHEAD BLANKING PLT 1 12" MANIFOLD CHANGE. SUN MANIFOLD BT10191
12 B16000000 TIER 4 PROPORTIONAL VALVE MTG BRKT 1 REPLACES BT10027_1. MOUNTING BRACKET
16-04-12
B18750000 REPLACES B16570000. MASTER UNIT
11 B15880000 MOUNTING BRACKET(FUSE B0X) 1
EL10056 REPLACES EL9776 (SEE ECO 8819)
7 B14620000 BRACKET ASSY - TIER IV CLUTCH FILTER 1
BG CLUTCH DRIVE MODELS & BOMS UPDATED
5 B12370000 BATTERY CLAMP TO SUIT EL9716 12V HD BATTERIES 1 A 7883 27-09-11 mevans
ITEMS 59-66 ADDED
given to a third party or used for manufacturing purposes without our per-
mission. As to infringements hereof, legal action will be taken with the
4 B12360000 BATTERY HOLDER TO SUIT EL9716 12V HD BATTERIES 1 REV ECO DESCRIPTION DATE CHANGED BY
or duplicated - neither in original, nor in modified form - shown to or
56
63
qh331
31 39
36
40
HIDDEN 49
40
50
51
37 21
46 35
34
46
2 7
47 19
62
53
52 22 70
44 69
DRAWING TO BS 308 & NS EN22553 (WELDING SYMBOLS) Designed. Drawn By. Checked. Approved. Scale. Projection. Material
SCREW THREADS ARE ISO METRIC COURSE PITCH IF IN DOUBT ASK 3rd ANGLE
MEDIUM FIT UNLESS OTHERWISE STATED.
A. WOOD
WELD CLASSES ACCORDING TO CASTINGS Weight. Sheet. of.
N/A 2 3
ISO 5817 (SA 1184,095) ISO 8062-CT12 (SA 1121,300)
Date. Drawing Size.
3.2 03/06/2011 A2
MACHINED SURFACES UNLESS OTHERWISE STATED TO BE
Drawing No. Revision.
TOLERANCES FOR LINEAR AND ANGULAR TOLERANCE CLASS
DIMENSIONS UNLESS OTHERWISE STATED. <100mm 100-1000 >1000mm QH331 CLUTCH CAT C9 (3A) POWERPACK
FABRICATION 1.0mm 2.0mm 3.0mm
MACHINED 0.25mm 0.5mm 1.0mm SWADLINCOTE, DERBYSHIRE, DE11 9DU
CB0142 C
57
ENGLAND, PHONE 01283 212121
ANGULAR 1.0 0.5 0.25
This drawing and all the enclosures belong to us. They must not be copied
or duplicated - neither in original, nor in modified form - shown to or
given to a third party or used for manufacturing purposes without our per-
mission. As to infringements hereof, legal action will be taken with the
support of the existing law.
SPARE PARTS
qh331
23
45
25
38
12
given to a third party or used for manufacturing purposes without our per
mission. As to infringements hereof, legal action will be taken with the DRAWING TO BS 308 & NS EN22553 (WELDING SYMBOLS) Designed. Drawn By. Checked. Approved. Scale. Projection. Material
SCREW THREADS ARE ISO METRIC COURSE PITCH IF IN DOUBT ASK A. WOOD 3rd ANGLE
MEDIUM FIT UNLESS OTHERWISE STATED.
WELD CLASSES ACCORDING TO CASTINGS Weight. Sheet.
N/A 3 of. 3
ISO 5817 (SA 1184,095) ISO 8062-CT12 (SA 1121,300)
Date. Drawing Size.
MACHINED SURFACES UNLESS OTHERWISE STATED TO BE
3.2 03/06/2011 A2
58
SPARE PARTS
59
FIT SOOT GUARD UP SIDE
DOWN FOR TRANSPORT
70 FAB1028 M10 U-BOLT 90mm CTRS 80mm LONG 1
69 FAB1026 M10 U-BOLT 140mm CTRS 100mm LONG 1
68 CB0168 TIER IV MULTI-PIPE SUPPORT ASSY (CHARGED AIR SYSTEM) 1
67 BT10191 SUN ADV 4 HYDRAULIC MANIFOLD 1
66 B18750000 PT TECH 12" SUN MANIFOLD MOUNTING BRACKET 1
65 FD1003 800N GAS STRUT 2
64 FD1505 GAS STRUT FORK END 4
63 EL10056 SUN 12" ADV 4 MASTER UNIT - CMCMU-008-12WA 1
62 10-29-9312 QH331 POWERRPACK HOSE KIT 1
60 RU1408 RUBBER TO SUIT B12360000 BATTERY HOLDER 1
59 B18660000 TIER IV C9.3 PRE-CLEANER SUPPORT BRACKET 1
58 CB0209 VORTEX PRE-CLEANER KIT (VIRGIS FILTER) 1
57 1442-15-58 CABLE BRACKET 1
56 1420-15-94 PIPE BRACKET 1
55 1420-16-38 MOUNTING BRACKET 1
54 EN10002 PSD 10 AIR CLEANER ASSEMBLY LONG VERTICAL BLUE MEDIA (NON 1
PRE-CLEANER TUBED or SCAVENGE) 6" INLET & 6" OUTLET
given to a third party or used for manufacturing purposes without our per-
mission. As to infringements hereof, legal action will be taken with the
DRAWING TO BS 308 & NS EN22553 (WELDING SYMBOLS) Designed. Drawn By. Checked. Approved. Scale. Projection. Material
4 B12360000 BATTERY HOLDER TO SUIT EL9716 12V HD BATTERIES 1 SCREW THREADS ARE ISO METRIC COURSE PITCH IF IN DOUBT ASK R Catterson 3rd ANGLE
MEDIUM FIT UNLESS OTHERWISE STATED.
3 B18010000 BG CAT C9.3 TIER 4 ENGINE SUPPORT 1 WELD CLASSES ACCORDING TO CASTINGS Weight.
N/A Sheet.
1 of. 3
ISO 5817 (SA 1184,095) ISO 8062-CT12 (SA 1121,300)
2 CB0140 TIER IV C9.3 CLUTCH POWERPACK (QH331) 1 Date.
24/10/2011
Drawing Size.
A2
QH331 CLUTCH CAT C9.3 (3B)
3.2
MACHINED SURFACES UNLESS OTHERWISE STATED TO BE
support of the existing law.
1 CB0093 TIER IV CENTRAL CORE POWERPACK COMPLETE 1 TOLERANCES FOR LINEAR AND ANGULAR TOLERANCE CLASS
Drawing No. Revision.
POWERPACK
DIMENSIONS UNLESS OTHERWISE STATED. <100mm 100-1000 >1000mm
ITEM PART No. DESCRIPTION QTY FABRICATION
MACHINED
1.0mm
0.25mm
2.0mm
0.5mm
3.0mm
1.0mm SWADLINCOTE, DERBYSHIRE, DE11 9DU
CB0143 C
Parts List ANGULAR 1.0 0.5 0.25
ENGLAND, PHONE 01283 212121
60
SPARE PARTS
22
38 HIDDEN
44
13
42
37 49
36 42
35
32 26
43
31 14
28 40
67
22
23
DRAWING TO BS 308 & NS EN22553 (WELDING SYMBOLS) Designed. Drawn By. Checked. Approved. Scale. Projection. Material
SCREW THREADS ARE ISO METRIC COURSE PITCH IF IN DOUBT ASK 3rd ANGLE
MEDIUM FIT UNLESS OTHERWISE STATED.
R Catterson
WELD CLASSES ACCORDING TO CASTINGS Weight. Sheet. of.
N/A 2 3
ISO 5817 (SA 1184,095) ISO 8062-CT12 (SA 1121,300)
Date. Drawing Size.
3.2 24/10/2011 A2
MACHINED SURFACES UNLESS OTHERWISE STATED TO BE
QH331 CLUTCH CAT C9.3 (3B) Drawing No. Revision.
TOLERANCES FOR LINEAR AND ANGULAR TOLERANCE CLASS
DIMENSIONS UNLESS OTHERWISE STATED. <100mm 100-1000 >1000mm
FABRICATION 1.0mm 2.0mm 3.0mm POWERPACK
MACHINED 0.25mm 0.5mm 1.0mm SWADLINCOTE, DERBYSHIRE, DE11 9DU
CB0143 C
ENGLAND, PHONE 01283 212121
ANGULAR 1.0 0.5 0.25
This drawing and all the enclosures belong to us. They must not be copied
or duplicated - neither in original, nor in modified form - shown to or
given to a third party or used for manufacturing purposes without our per-
mission. As to infringements hereof, legal action will be taken with the
support of the existing law.
qh331
SPARE PARTS
61
64
65
64
11
24
10
55
1
2
64
65
64
2
qh331
DRAWING TO BS 308 & NS EN22553 (WELDING SYMBOLS) Designed. Drawn By. Checked. Approved. Scale. Projection. Material
SCREW THREADS ARE ISO METRIC COURSE PITCH IF IN DOUBT ASK R Catterson 3rd ANGLE
MEDIUM FIT UNLESS OTHERWISE STATED.
WELD CLASSES ACCORDING TO CASTINGS Weight. 3504.42 kg Sheet.
3 of. 3
ISO 5817 (SA 1184,095) ISO 8062-CT12 (SA 1121,300)
Date. Drawing Size.
24/10/2011 A2
QH331 CLUTCH CAT C9.3 (3B)
3.2
MACHINED SURFACES UNLESS OTHERWISE STATED TO BE
support of the existing law.
21
22
16
18 14
19
20
2
15 1
17
2
13
11
3
8 6 12
7
QH331-12-00 REV 0.00
10
20 M16_WASHER 0 Washer 2
21 PN1248 B Turnbuckle Pivot Pin 1
PT Tech Clutch
6 Clutch lub filter element HF9920 1
7 Clutch Breather HF9523 1
Hydraulic system
8 High pressure filter element 10-21-0321 1
9 Return filter element 10-21-0031 2
10 tank air breather 10-22-4006 4
PT Tech Clutch
6 Clutch lub filter element HF9920 1
7 Clutch Breather HF9523 1
Hydraulic system
8 High pressure filter element 10-21-0321 1
9 Return filter element 10-21-0031 2
10 Tank air breather 10-22-4006 4
11 2 1/2" Suction filter 90 micron 10-21-0007 2
12 1" Suction filter 90 micron 10-21-0003 2
PT Tech Clutch
7 Clutch lub filter element HF9920 1
8 Clutch Breather HF9523 1
Hydraulic system
9 High pressure filter element 10-21-0321 1
10 Return filter element 10-21-0031 2
11 tank air breather 10-22-4006 4
PT Tech Clutch
7 Clutch lub filter element HF9920 1
8 Clutch Breather HF9523 1
Hydraulic system
9 High pressure filter element 10-21-0321 1
10 Return filter element 10-21-0031 2
11 Tank air breather 10-22-4006 4
12 2 1/2" Suction filter 90 micron 10-21-0007 2
13 1" Suction filter 90 micron 10-21-0003 2