Академический Документы
Профессиональный Документы
Культура Документы
on your hand:
show that we are charting exactly the right course with our new
Simpler
storage and logistics for the trade. The smaller number of system
components means more streamlined storage and less tied-up
capital.
Comfortable
Safety 5
with a channel profile which simply drains better. The whole product
line fulfils or exceeds all of today's standards and regulations, as
well as those foreseeable in the future, and naturally also DIN EN
1433.
Added value
System overview: All three edge-rail versions in all four widthsSystem overview:
100
150
200
9
Material
Edge-rails/Gratings A 15 B 125 C 250 D 400 E 600
The material compatibility of the edge-rails and covers provide a uniform look and prevent contact corrosion.
www.acodrain-multiline.de ACO DR AIN
Fibre concrete
Concrete
Polymer concrete
0 5 10 15 20 25
0 10 20 30 40 50 60 70 80 90 100
Durable and recyclable: ACO polymer The raw materials used to make ACO
Fibre concrete
concrete avoids waste because it can be polymer concrete have to meet stringent
returned to the production process. Concrete specifications and pass continuous quali-
ty controls. In addition to our internal
Polymer concrete
quality controls in accordance with DIN
EN 1433, our products are also tested
0 20 40 60 80 100 120 140 160 180 and third-party controlled by KIWA Ger-
Surface roughness (m) many. Homologation in accordance with
DIN EN 1433 is conducted by MPA
Average surface roughness of drainage chan- Eckernfrde and MPA Lbeck.
nels made with different materials.
www.acodrain-multiline.de ACO DR AIN
20.0 15.0 10.0 10.0 10.0 10.0 10.0 5.0 5.0 5.0 5.0 5.0 0.0
20.0 15.0 10 9 8 7 6 5 4 3 2 1
12
EK EK EK EK
LF LF KF KF
0-20 0-20 0-10 0-10
EK EK
Sump unit short-form 0.5 m length with infini- Stepped gradient
KF KF tely variable connection for heights 0-10 and
0-10 0-10
preformed corner-T-cross connections for
connection heights 0 + 5 + 10, and horizon-
tal drain unions DN 100 or DN 150 with Sloped channels enhance water
integrated lip-labyrinth seals (only for LW flow
100) ACO DRAIN Multiline drainage systems 13
are suitable for all types of gradients,
Sump unit long-form 0.5 m length with infini- from sloped to neutral, and allow diffe-
EK EK
LF LF tely variable connection to heights 0-20 and rent gradient types to be combined.
0- 20 0-20
preformed corner-T-cross connections for
connection heights 0 + 5 + 10 + 15 + 20, The conditions for complete drainage of
and horizontal drain unions DN 100, DN the channel drain are best when the
150 or DN 200 with integrated lip-labyrinth system is installed using sloped chan-
seal. nels. This speeds up the drainage of the
water and boosts the self-cleaning
effect. The run-off velocity built up over
the first few metres of slope is maintai-
Flat channel details ned over the next few metres of the
channel drain. This means that for longer
Internal width Height drains, only around 10 metres of sloped
gradient at the start of the drain are
100 9/11 cm required to achieve the highest drainage
150 12 cm performance. The remaining sections of
200 12 cm the channel drain can be equipped with
300 12 cm stepped or neutral gradients.
www.acodrain-multiline.de ACO DR AIN
Connection table
lW Connection lW 100/150/200/300
100 To horizontal outlets with LLD, DN 100 End plate, type no.: 0.0, 5.0, 10.0, 15.0, 20.0
150 To horizontal outlets with LLD, DN 150 End plate, type no.: 0.0, 5.0, 10.0, 15.0, 20.0
14 200/300 To horizontal outlets with LLD, DN 200 End plate, type no.: 0.0, 5.0, 10.0, 15.0, 20.0
100 With vertical outlet with LLD, DN 100 Flat channel, type no.: 9 cm/11 cm
1.0 m Element, Typnr.: 0.0.2, 5.0.2, 10.0.2, 15.0.2, 20.0.2
0.5 m Element, Typnr.: 0.2, 5.2, 10.2, 15.2, 20.2
150 With vertical outlet with LLD, DN 150 Flat channel, type no.: 12 cm
1.0 m Element, Typnr.: 0.0.2, 5.0.2, 10.0.2, 15.0.2, 20.0.2
0.5 m Element, Typnr.: 0.2, 5.2, 10.2, 15.2, 20.2
200/300 With vertical outlet with LLD, DN 200 Flat channel, type no.: 12 cm
1.0 m element, type no.: 0.0.2, 5.0.2, 10.0.2, 15.0.2, 20.0.2
0.5 m element, type no.: 0.2, 5.2, 10.2, 15.2, 20.2
100 Via preformed element, for knocking-out vertically, DN 100 0.5 m element, type no.: 0.1, 5.1, 10.1, 15.1, 20.1
150 Via preformed element, for knocking-out vertically, DN 150 0.5 m element, type no.: 0.1, 5.1, 10.1, 15.1, 20.1
200/300 Via preformed element, for knocking-out vertically, DN 200 0.5 m element, type no.: 0.1, 5.1, 10.1, 15.1, 20.1
Multiline sump unit with lip-labyrinth seal Multiline end plate and end plate with drain uni- Multiline vertical outlet
on
Water level
Internal height
Water depth
Hydraulic dimensioning
a) b)
L
ACO DRAIN Lightspots in front of the entrance of Mobilcom in Bdelsdorf/Germany. ACO DRAIN Multiline at the IHK (Chambers
of Industry and Commerce) in Kiel/Germany
18
ACO DRAIN Multiline installed as a facade ACO DRAIN Multiline as a surface drainage system for a distribution centre.
drain
ACO Systems FZE
subject to alterations
www.aco.ae