Академический Документы
Профессиональный Документы
Культура Документы
Adapter List
Converter List
for
ALL-11
JUL. 2000
Introduction
T he Device List lets you know exactly which devices the Universal
Programmer currently supports. The Device List also lets you know which devices
are supported directly by the standard DIP socket and which
devices require an adapter or a converter to be programmed. Each IC can
come in different package such as DIP, PLCC, QFP, TSOP, PGA, etc.... Nearly all
devices that come in a DIP package can be supported directly by the standard
DIP socket. Devices that come in other packages will need a "converter" or
"adapter" to be programmed. The following diagram illustrates this:
Example :
direct programming
8751 (DIP)
ALL-11
require CNV-PLCC-MPU51
for programming
8751(PLCC)
ALL-11
Some devices only come in surface mount packages like PLCC,PGA, SOP or have
special programming requirements. These devices may also have higher pin
counts from 44 pins to over 300 pins. These devices require an "adapter" to be
programmed as well as an extra software driver. The software drivers are included
with the adapters.
Example :
require ADP-
MACH445 and Runfile
WAMACH1.EXE
for programming
MACH 445 100 pin QFP
ALL-11
PROGRAMMER FOR ALL-11P3
***** 8748-series *****
Mfr. Device Type Device P/N ADP/CNV BIN. EXE. Ver.
ALTERA PLD EPC1064(date code after 99) CNV-DIP-EPC No Need WEPC V5.03
ALTERA PLD EPC1213(date code after 99) CNV-DIP-EPC No Need WEPC V5.03