Академический Документы
Профессиональный Документы
Культура Документы
Totally oil free, clean and completely safe for people, processes and products. As a result of employing advanced
materials, high velocity and loaded sliding surfaces can operate effectively with water as their only coolant/lubricant. The potential for cross
contamination of the system fluid or the lubricating oil is removed. The result is an exceptionally small light weight product. Each bearing
employs a hard/soft interface that minimises vibration and ensures a low noise and high efficiency operation.
Manufactured in 316 stainless steel as standard the product offers excellent resistance to corrosive fluids. The materials utilised internally
can be selected to suit the most appropriate combinations for not just tap water but also sea water and various other fluids.
Minimal pulsation is experienced with these units due to the multiple piston design and the high operational speeds. The physical size of the
motor in comparison to the power generated offers one of the most compact drive solutions
** *** - *** *
(Bar) (cc/rev)
* * * *
MA Motor Anti-Clockwise 010 10 0 .3 0.3 W Tap Water
MB Motor Boosted M in
M3 S Sea Water
MC Motor Clockwise ... ... 4 .6 4.6 O Other*
MV Motor Variable** 160 160 6 .0 6.0
M6
M ax 15 15.0 (*Please Specify)
19 19.0
M15
( * * M 6 0 & M 1 80 o n l y )
30 30.0
35 35.0
M30
63 63.0
70 70.0
M60
180 180.0
225 225.0
M180
Example
Ordering Code
MC160-6.0W
NOTES :
Whilst every endeavour has been made to ensure accuracy, this publication cannot be considered to represent part of any contract, whether
V 02.11 expressed of implied. The publishers reserve the right to amend specification at their discretion.
FM 87247
Page 1 of 1
http://www.waterhydraulics.co.uk/new/map.php?item=m3g.swf 15/04/2009
Page 1 of 1
http://www.waterhydraulics.co.uk/new/map.php?item=m6g.swf 15/04/2009
Page 1 of 1
http://www.waterhydraulics.co.uk/new/map.php?item=m15g.swf 15/04/2009
Page 1 of 1
http://www.waterhydraulics.co.uk/new/map.php?item=m30g.swf 15/04/2009
Page 1 of 1
http://www.waterhydraulics.co.uk/new/map.php?item=m60g.swf 15/04/2009
1 2 3 4 5 6
Mount Flange to
152.35
152.30
SAE "D"
Configuration
228.60
B
193 B
69
77.80
193
C C
252 M12x18
2 Ports
2" SAE (3000 PSI)
30.50 42.80 4 bolt flange
300.50
D ISSUE REMARKS DATE NAME SIGNATURE DATE UNLESS OTHERWISE SPECIFIED: 3rd ANGLE
THIS DRAWING IS THE PROPERTY OF DIMENSIONS ARE IN MILLIMETERS PROJECTION
THE WATER HYDRAULICS COMPANY DRAWN TM TMarkham 5/01/08
LTD. AND MAY NOT WITHOUT WRITTEN TOLERANCES:
CHK'D CH C HAll 5-01-08
CONSENT BE COPIED IN WHOLE OR LINEAR: +/- 0.1
PART OR USED FOR ANY PURPOSE APPV'D TM T Markham 5-1-08 ANGULAR: +/- 0.25
OTHER THAN ORIGINALLY SUPPLIED
Tel: 01482 595000
MATERIAL: STAINLESS STEEL DRG. NO. W34001
1 2 MK2 P&M 180 Installation Drawing SURFACE FINISH: 1.6 U.O.S. ORIGINAL SHEET SIZE: A4 SCALE:1:10 SHEET 1 OF 1
Page 1 of 1
http://www.waterhydraulics.co.uk/new/map.php?item=m180g.swf 15/04/2009
Janus J A N U S
Motors
M OT O R S
Totally oil free, clean and completely safe for people, processes and products. As a result of employing advanced
materials, high velocity and loaded sliding surfaces can operate effectively with water as their only coolant/lubricant.
The potential for cross contamination of the system fluid or the lubricating oil is removed. The result is an exceptionally
small light weight product. Each bearing employs a hard/soft interface that minimises vibration and ensures a low noise
and high efficiency operation.
Manufactured in A.I.S.I. 316 stainless steel as standard the product offers excellent resistance to corrosive fluids. The
materials utilised internally can be selected to suit the most appropriate combinations for not just tap water but also sea
water and various other fluids.
Minimal pulsation is experienced with these units due to the multiple piston design and the high operational speeds.
The physical size of the motor in comparison to the power generated offers one of the most compact drive solutions
Max cont. pressure (bar) 160 160 160 160 160 160
Temperature
The units will generate full performance from 2C to 50C. For temperatures below freezing an environmentally friendly
antifreeze is available; ask for the glycol data sheet. Operation above 50C is possible, but the volumetric efficiency of
the unit will be affected consult TWHC and specify the maximum operating temperature.
Filters
All incoming water to the motors must be pre-filtered to a nominal rating of 10m (25m absolute) with a filter element
rating of 10 = 75 or better. Return line filtration is advisable on closed loop systems. High pressure filtration may also
be considered.
Shaft Loading
Radial and axial loads are not permitted on the motor output shaft.
Operation
It is advised that the motors are operated on a regular basis to ensure the appropriate starting torque is maintained.
B
D g6
G g6
C
* Through bolts supplied with unit
H
Motor A B C D E F G H I J K L M N Keyway SAE
Bolts SIZE
M3 80 55 32 8 11 5 48 1/8 M4*
M6 85 75 37 16 18 9 67.5 3/8 1/2 3/8 1/2 M5* 3x3
M15 145 89 114 82.5 6.3 37 19 12 106.3 3/4 3/4 1/2 3/4 M10 6x6 A
M30 161 110 174 101.6 9.4 51.3 24 13.5 144 3/4 1 1/2 1 M12 8x7 B
M60 202 139 215 127 12.6 63 28 21.5 181 1 1 1/2 11/2 M16 8x7 C
M180 300 193 252 152.4 14.5 74 8/16 30.5 228.6 SAE SAE 1 3 M24 13T D
Spline 2 2 Spline
Port Configuration
M BSPP
Return Port
L BSPP
Leakage Port
J BSPP K BSPP
J BSPP Pressure/ Pressure/
Pressure Port Return Port Return Port