Вы находитесь на странице: 1из 2

RULES FOR BUILDING AND CLASSING

ALUMINUM VESSELS
1975

NOTICE NO. 10 November 2010

The following Rule Changes were approved by the ABS Classification Committee on 22 July 2010
and become EFFECTIVE AS OF 1 JANUARY 2011.

Notes - The date in the parentheses means the date that the Rule becomes effective for new construction based
on the contract date for construction, unless otherwise noted. (See 1-1-4/3.3 of the ABS Rules for
Conditions of Classification (Part 1).)

SECTION 1 SCOPE AND CONDITIONS OF CLASSIFICATION

1.7 Plans and Data to be Submitted


(Revise last paragraph of 1.7.1 as follows.)
1.7.1 Hull Plans and Data to be Submitted (2011)
(Preceding text remains unchanged.)
Plans should generally be submitted electronically to ABS. However, hard copies will also be accepted.

(Revise 1.7.2 as follows.)


1.7.2 Machinery Plans (2011)
Plans showing the proposed arrangements of engine, thrust, and boiler foundations, including holding-
down bolts; also such plans of the machinery installation as are enumerated in the following Sections of
the machinery requirements are to be submitted and approved before proceeding with the work. It is
desired that the sizes, dimensions, welding and other details, make and size of standard approved
appliances be shown on the plans as clearly and fully as possible. All welded construction is to meet the
requirements of Appendix 2-5-A1 of the ABS Rules for Materials and Welding (Part 2) Aluminum and
Fiber Reinforced Plastics (FRP). Plans should generally be submitted electronically to ABS. However,
hard copies will also be accepted. All plan submissions originating from manufacturers are understood to
be made with the cognizance of the shipbuilder. A fee may be charged for the review of plans for which
there is no contract of classification.

ABS RULES FOR BUILDING AND CLASSING ALUMINUM VESSELS . 1975 1


Notice No. 10 November 2010

SECTION 31 CONDITIONS OF CLASSIFICATION OF MACHINERY

(Revise 31.5 as follows.)


31.5 Plans and Data to be Submitted (2011)
Plans showing the proposed arrangements of engine, thrust, and boiler foundations, including holding-
down bolts; also such plans of the machinery installation as are enumerated in the following Sections of
the machinery requirements are to be submitted and approved before proceeding with the work. It is
desired that the sizes, dimensions, welding and other details, make and size of standard approved appliances
be shown on the plans as clearly and fully as possible. All welded construction of steel is to meet the
requirements of the Chapter 4 of the ABS Rules for Materials and Welding (Part 2). Plans should generally be
submitted electronically to ABS. However, hard copies will also be accepted.

2 ABS RULES FOR BUILDING AND CLASSING ALUMINUM VESSELS . 1975

Вам также может понравиться