Вы находитесь на странице: 1из 4

Shutdown SIS

Previous Screen

Product: INDUSTRIAL ENGINE


Model: C18 INDUSTRIAL ENGINE ZPS
Configuration: C18 Industrial Engine ZPS00001-UP

Disassembly and Assembly


C18 Locomotive Engine
Media Number -UENR3274-00 Publication Date -01/04/2013 Date Updated -15/04/2013

i05133430

Engine Oil Pump - Disassemble


SMCS - 1304-015

Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-2321 Combination Puller 1
B 1P-0510 Driver Group 1

Start By:

A. Remove the engine oil pump.

NOTICE

Care must be taken to ensure that fluids are contained during


performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.

Refer to Special Publication, NENG2500, "Dealer Service Tool


Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.

Dispose of all fluids according to local regulations and mandates.


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.

Illustration 1 g01001918

1. Remove the bolt that holds drive gear (1) to the shaft of engine oil pump (2) .

2. Use Tooling (A) to remove drive gear (1) from the shaft. Remove the key from the shaft.
Illustration 2 g01043546

Personal injury can result from parts and/or covers under spring
pressure.

Spring force will be released when covers are removed.

Be prepared to hold spring loaded covers as the bolts are loosened.

3. Remove bolts (6) that hold retainer (9) to pump body (3) .

4. Remove retainer (9), spring (8), and relief plunger (7) from the pump body.

5. Remove bolts (12) and cover (10) from the pump body.

Note: Inspect the bores in the cover. The aluminum cover does not have bearings. If the
bores in the cover are damaged, replace the cover with a new part.

6. Remove idler gear (5) and drive gear (4) from the pump body.

7. Use Tooling (B) to remove sleeve bearings (11) from pump body (3) .
Copyright 1993 - 2017 Caterpillar Inc. Thu Dec 14 11:36:56 UTC+0700 2017
All Rights Reserved.
Private Network For SIS Licensees.

Вам также может понравиться