Академический Документы
Профессиональный Документы
Культура Документы
ON
BACHELOR OF TECHNOLOGY
IN
MECHANICAL ENGINEERING
By
Deshmukhi (V), near Ramoji Film City, Nalgonda District, Pin code-508284, T.S.
2017
i
CERTIFICATE
Institute of Engineering and Technology in partial fulfillment for the award of the degree,
Bachelor of Technology in Mechanical Engineering, this is a record of the bonafide work carried
ii
ACKNOWLEDGEMENT
It gives us an immense pleasure to acknowledge with gratitude, the help and support received by
us during the course of the successful completion of the project “FABRICATION OF SEMI-
AUTOMATIC DRAIN CLEANER”. We are grateful to our internal guide, Mr. L. Ravi,
professor, Department of Mechanical Engineering, Nizam Institute of Engineering and technology
for perseverance, patience and gracious cooperation extended by him in the execution of this
project.
We owe our immense thanks to Dr. Y. Sujatha, Head, Department of Mechanical Engineering,
Nizam Institute of Engineering and Technology for this valuable guidance, sustain interest,
constructive criticism and constant in encouragement at every stage of this in endeavor.
Special thanks Dr. Mohammed Sanaullah Qaseem, Professor and Principal, Department of
Computer Science Engineering, Nizam Institute of Engineering and Technology and the
management of Nizam Institute of Engineering and Technology for providing us the best amenities
to enable us complete our project in the stipulated time.
Last but not the least; We are very thankful our parents, friends and the other faculty of the
department of Mechanical Engineering for their unstinting support which gave us the confidence
required to overcome the obstacles that we faced in the completion of this project.
iii
DECLARATION
This is to certify that work reported in the present thesis titled “FABRICATION OF SEMI-
AUTOMATIC DRAIN CLEANER” is a record of work done by us in the Department of
Mechanical Engineering, Nizam Institute of Engineering and Technology, Deshmukhi (Village),
Nalgonda(District), Pin code-508284
iv
ABSTRACT
In this project, the proposed concept is to replace the manual work in drainage cleaning by Semi-
Automatic drain cleaner. Now-a-days even though Semi-Automatic drain cleaner plays a pivotal
role in all industrial application in the proper disposal of sewage from the industries and
commercial are steel a challenging task. Drainage pipes are using for the disposal. Unfortunately,
sometimes there may be loss of human life while cleaning the blockages in the drainage system.
To overcome this problem and to save human life we implemented a design “Semi-Automatic
drain cleaner” and we designed our project to use this in a efficient way to control the disposal of
wastages and with regular filtration of wastages. The Semi-Automatic drain cleaner is a machine
which helps to protect the environment from different kinds of environmental hazards through the
promotion waste management by the removal of garbage from the drainages system. These wastes
when not removed end up settling in residential places where these wastes are burnt thereby
causing climate change otherwise these wastes block the drainage system thereby causing
flooding. Fabrication of the Model and assembling of the model carried out and then process are
studies and optimized for effective semi-automatic drain cleaner for sewage water for floating
materials.
v
CONTENTS
PRELIMINARIES PAGE NO
CERTIFICATE (ii)
ACKNOWLEDGEMENT (iii)
DECLARATION (iv)
ABSTRACT (v)
1.2 Advantages 5
1.4 Disadvantages 5
vi
4.5 Belt Drive 22-23
4.8 Pulley 26
4.9 Lifter 27
4.14 Screw 31
vii
5.12 Fixing of Motor 50
CHAPTER 6- TESTING
CHAPTER 7- RESULT 63
CHAPTER 8- CONCLUSION 64
CHAPTER 9-REFRENCE 65
viii
LIST OF FIGURES
Name Page No
4.2 Shaft 18
4.3 Sprocket 20
4.10 Pulley 26
4.11 Lifter 27
4.16 Grease 30
ix
4.17 Screw 31
4.18 Primer 33
4.19 Paint 34
x
5.22 Welding of Chain 49
xi
LIST OF TABLES
Name Page No
4.6 Pulley 26
xii