Академический Документы
Профессиональный Документы
Культура Документы
Two models are available MINIPRO 866 CS & MINIPRO 866 A.The 866 A has
an additional advantage of ICSP – In Circuit Serial Programming – a real awesome
support for ON board programming of SMD chips.
ICSP now supports ATMEL89S51, 52, ATMEGA- AVR whole series and
MICROCHIP PIC10F, 12F, 16F, 18F whole series, SYNCMOS SM59Dxx /
SM59Rxx full range. Minipro programmer delivers outstanding performance in
supporting nearly 13k + devices that other similar products like Top win are not
capable.
Click “Install this driver software anyway “to bypass Windows verification.
Now connect the Hardware unit to the USB port .Under Device Manager you can
see the device name as “MiniIProWdf” if the installation went through smoothly.
You’re all set to start the Programming. Open the IDE & if you get Reflash
Firmware window, just click on Tools Reflash Firmware from the IDE to install
the latest updates obviously you should connect the hardware to the USB & your
internet connection should be ON for this process. If there is no access to internet
the Reflash Firmware window appears again.
Once the Reflash is successful, click on the “Cancel” button. (Yes it is not OK
button, it is Cancel button) We shall see how to program PIC 16F877A IC. Under
Select IC à click Search and Select IC.
The File Load Options should be in the File format “INTEL HEX” .The Binary
option is to load a “bin” file. Here confirm INTEL HEX is selected.
Figure. Open the Program File
Now remove the MASTER chip from the ZIF socket & place the SLAVE IC .This
IC should be a fresh blank one or erased one under UV light. Click on the “P”
button on the top to start copying the data on the buffer to the chip.