Академический Документы
Профессиональный Документы
Культура Документы
Heating systems
Industrial systems
Refrigeration systems
Contents
2/3
Mechanical ventilation systems from Viessmann offer tailor-made solutions for both new
build and modernisation. This brochure provides you with all you need to know about the
current product range, accessories and service.
In recent years, more stringent building [Germany]), this annual heat demand is only
regulations have led to sustainable energy around a quarter of that figure.
savings, particularly in the construction of
new houses and apartments. For example, in Use of new building and insulating materials
existing housing, the annual heat demand for results in an airtight construction that no
a detached house is approx. 200 kWh/m². For longer provides the necessary minimum air
a comparable new house, built in line with the change rate in the interior.
new 2014 Energy Savings Ordinance (EnEV
4/5
180 C
1-28 40 C
Many modern buildings are built with Heat recovery from extract air
mechanical ventilation systems already Advanced mechanical ventilation systems
installed. On the one hand, this requires a are particularly energy efficient: A powerful
high level of energy insulation in order to heat exchanger recovers up to 98 percent of
regulate indoor air humidity as effectively the latent heat in the extract air and uses it
and reliably as possible. On the other, it to heat the incoming fresh air. This reduces
is regarded as a comfort feature for well household expenditure perceptibly thanks
equipped apartments or buildings. to a significantly lower energy demand.
Furthermore, CO2 emissions are reduced.
Mechanical ventilation in detached
houses Every new building equipped with mechanical
The installation of mechanical ventilation ventilation has a central unit that supplies
systems in new detached houses is already all rooms with fresh air via a duct system.
standard, especially in low energy and passive In most cases, the duct system is concealed
houses. in the floor or integrated into the walls.
Air vents are all that remain visible. The air
Consequently, no heat is lost through change rate is regulated automatically by
accidental ventilation in the colder months the central ventilation unit. It is quiet in
and the continuous air change ensures a operation and protects against external noise.
consistently high level of indoor air quality.
ai
Vitovent 300-F.
pp
ct
tra
ly
ai
Ex
r
do
ha
or
a ir
VITOVENT 200-C
Ceiling mounted mechanical
ventilation system with
heat recovery.
Max. air flow rate:
200 m3 /h
Up to 95 % heat recovery
Page 18
VITOVENT 300-F
Floorstanding mechanical
ventilation system with
heat recovery.
Max. air flow rate:
280 m3 /h
Up to 98 % heat recovery
In conjunction with heat
pump compact appliances
Page 20
Mechanical Vitovent 300-W
ventilation system
3
2
Vitovent 300-W
1 Bypass damper
2 DC fan with impeller vanes
bent backwards
3 Extract air filter
4 Preheating coil
5 Countercurrent heat exchanger
6 Outdoor air filter
Space saving ceiling mounted or wall mounted mechanical ventilation system with
heat recovery for modernisation
With the new Vitovent 300-C mechanical Allergy sufferers can breathe more easily
ventilation unit, Viessmann offers a solution The Vitovent 300-C mechanical ventilation
that is particularly suitable for the controlled system also lets allergy sufferers breathe
ventilation of apartments on several floors. more easily. A filtration system, featuring an
Especially after implementing energy saving effective pollen filter, cleans the supply air of
measures in a building and insulating exterior allergens and harmful substances, thereby
walls, the shell of the old building becomes creating an irritant-free environment.
more airtight and requires adequate ventilation
to protect the building fabric. Otherwise, there Remote control
is a risk of mould growth due to excessive A remote for convenient control of the
humidity in the interior. unit from the living space is available as an
accessory.
Fits easily in recesses
The Vitovent 300-C impresses with its High operating convenience
compact, slimline design. It can be concealed The Vitovent 300-C ventilation unit can be
quite easily in suspended ceilings. For example connected directly with the control unit of the
in a hallway, where the ventilation ducts to the heat generator.
rooms on either side can also be installed.
The unit can be operated by the following:
Vertical installation in a wall is equally possible, – the Vitotronic 200 (WO1C) control unit of
for example in a storeroom. the heat pump
– the 5-inch colour touchscreen
Ideal for most apartments of the Vitotronic 200 (HO2B) for
The unit's maximum air delivery of 150 m3 /h Vitodens 300-W/333-F/343-F
is sufficient for ventilating interiors of between – the ventilation programming unit, type LB1
65 and 90 m2 quite comfortably. (convenient with graphic display)
2 Vitovent 300-C
5 6
4 1 Bypass
2 Centrifugal DC fans
3 Cross-countercurrent
3 heat exchanger
4 Electric preheating coil
5 Condensate drain
6 Outdoor air filter
1 7 Sensor and remote control
2 connection, accessible from
10 the outside
11 8 Outdoor air
12 9 Exhaust air
10 Extract air filter
11 Extract air
12 Supply air
14
4
6
10 2
Vitovent 200-C
1 Outdoor air
2 Centrifugal DC fan, extract air
9
3 Condensate pan and drain
13 4 Outdoor air filter
5 Exhaust air
8
6 Slot for preheating coil (accessory)
11
7 Supply air
8 Centrifugal DC fan, supply air
12
7
9 Countercurrent heat exchanger
10 Bypass
11 Extract air filter (with cover)
12 Extract air
13 Terminal area
14 Integral fixing rails
Mechanical ventilation unit plus heat pump – the perfect system combination for
new build
Together with an air source or ground source Air tempering in passive houses
heat pump*, the Vitovent 300-F mechanical The combination of a Vitovent 300-F and
ventilation unit combines the benefits of heat pump can be used very effectively
an integral appliance with the flexibility of in passive houses for air tempering. By
Viessmann heat pumps. The heat pumps that and large it makes a hydraulic distribution
can be combined with this ventilation system system superfluous. A reheating coil with an
offer a heating output of between 3.0 and output of up to 1.5 kW is integrated for this
10.6 kW. The system as a whole can be used purpose. In addition, an optional heating water
for interiors with up to 210 m2. buffer cylinder with a capacity of 25 litres is
integrated into the Vitovent 300-F.
All functions delivered from the smallest
of footprints Additional utilisation of solar energy
This system combination is particularly Solar collectors for domestic hot water
suitable for new buildings, since all functions, heating can be connected directly if the
such as ventilation, heating/cooling and Vitocal 343-G/242-G or Vitocal 242-S heat
domestic hot water heating, can be pumps are deployed. Energy costs can be
implemented in the smallest of spaces. slashed thanks to the integral solar function
The Vitovent 300-F can be installed directly for solar DHW heating. Lastly, utilisation of
to the right or left of the heat pump, forming power generated on site by an additional
a harmonious unit on a small footprint. photovoltaic system contributes to further
energy savings.
High operating convenience
The Vitovent 300-F ventilation module is
connected directly to the heat pump. All
settings can be made from either the heat
pump's Vitotronic 200 (WO1C) control unit,
a common remote control unit or the Vitotrol
app. At the same time, heat pump operation
and ventilation are automatically matched to
each other.
5
1
Vitovent 300-F
Mechanical ventilation system
with heat recovery
3
1 Fan
2 Extract air filter
3 Supply air filter
4 Heat exchanger
6 5 Active filter monitoring
6 Buffer cylinder
(optional for air tempering in
passive houses)
7 Reheating coil
(optional for air tempering in
passive houses)
The decentralised Vitovent 100-D mechanical ventilation unit operates as quietly as a whisper.
It is equally suitable for modernisation and new build.
Rising energy costs make modernising air heats up the integral ceramic thermal
energy systems in the housing industry a store. Around 70 seconds later, the rotational
must. Frequently, replacing windows and direction of both fans changes and the waste
insulating the building envelope are part of heat that has been stored is transferred to the
the modernisation process. This ensures fresh ventilation air.
that even older homes are so airtight that
the supply of fresh air is no longer sufficient. Up to 91 percent heat recovery
This results in high humidity levels in the This integral heat recovery and humidity
interior, which can lead to harmful mould control in the Vitovent 100-D reaches a value
growth, especially in buildings with insulated of up to 91 percent, resulting in a noticeable
external walls. The installation of mechanical reduction of heating bills.
ventilation units provides an appropriate
remedy. Heat recovery can be disabled in summer.
During this season, cool night air can be
Changeover operation with two appliances blown into the interior.
The decentralised Vitovent 100-D mechanical
ventilation unit is especially suited to ventilating Touchscreen for remote control
living rooms and bedrooms of both children A programming unit with touchscreen is
and adults. The continuous operation of the installed in the living space to act as a central
ventilation system guarantees a constant controller for the Vitovent 100-D. This can be
replacement of stale air by fresh air in the used to adjust the air change rate for each
interior, at the same time regulating the room individually across the whole house.
relative humidity. Six different operating modes are available
at a tap of the screen:
At least two Vitovent 100-D work in alternating
mode. While one appliance is blowing fresh Controlling the ventilation levels
air into the room, the other appliance moves Eco mode (standard mode) with heat
stale air outside. The heat latent in the stale recovery
Blast ventilation mode for shorter periods
of higher relative humidity
Sleep mode with fans turned off for short
periods
Airing mode to cool the interior at night
Holiday mode with lowest possible
3
electricity consumption
Filter change indicator
4
2 2
4
Vitovent 100-D
Decentralised mechanical ventilation unit Vitovent 200-D – perfect for modernisation and
new build
The compact Vitovent 200-D mechanical At the same time, heat recovery saves energy
ventilation unit has been designed for the when compared, for example, to essential
controlled ventilation of individual rooms. window ventilation. That reduces heating bills.
The incoming air is filtered and heated via
the cross-countercurrent heat exchanger with The supply air function provides additional
the heat extracted from the indoor air. Up to comfort in summer: At night, the heat
90 percent of the heat latent in the extract air exchanger can be bypassed and cool night
is recovered. Up to 55 m3 of air is replaced air fed into the interior.
Round wall sleeve with per hour. A comprehensive ventilation
exterior wall cover
concept can also be realised if several units Straightforward operation and
are employed. maintenance
The programming unit is integrated into
The installation of the ventilation unit requires the internal wall cover. Supply and outdoor
only one opening in the external wall. No air filters can be replaced and central
additional air ducts need to be installed – components cleaned and inspected quite
only one power supply (230 V) is required. comfortably from the inside.
A choice is available between angular and
rounded casing designs for high flexibility plus The wireless operating switch (accessory)
quick and easy installation. with no batteries allows convenient changing
of the operating mode of one or more
Square wall sleeve with The Vitovent 200-D mechanical ventilation appliances simultaneously. Technology based
exterior wall cover
unit is very well suited, for example, to on the piezo-electrical effect means that
combating problems with damp as part of no cable connection or battery changes are
a modernisation project or for conveniently required, so the switch can be positioned
maintaining a comfortable ambience. without incursion into the building fabric.
2 4
5 4
7 Vitovent 200-D
The LVS air distribution system is the universal Smooth surfaces prevent dirt build-up
solution for all central Vitovent mechanical Smooth inside and outside surfaces
ventilation units. The system comprises just prevent the duct system and the intake/
19 multifunctional core components that can discharge valves from becoming dirty. The
be flexibly combined. air distribution system is totally hygienic. If
required, the system can be easily cleaned via
Easy to design and route integral inspection ports.
The flat duct system, which stands at a
height of just five centimetres, can be routed
directly on an unfinished floor. All parts are Exterior wall duct
Take advantage of these benefits
pushed together until they click permanently
into place, without the need for tools. Round Clean, filtered air in the living space
ductwork is available for routing the system Attractive air vents in white and stainless
in reinforced floors and in suspended ceilings. steel finishes
Adaptors ensure smooth transitions from flat Hygienic air distribution
to round ducts and back again. Duct system can be cleaned if required
Low pressure drop in the flat ductwork
This makes for quick routing of ductwork on saves energy
the floor/ceiling after the initial construction Compact components save space in the
of the building. Round ductwork should be living area (in terms of ceiling height or wall
designed before initial construction begins. thickness)
Regardless of whether flat or round ductwork
is used, the flexible plastic distribution system Exhaust air roof outlet
13
11
16
12
15
14
6 10
5
7
8
9
4
3
2
Typical installations
– Round duct, embedded in concrete
– Flat duct in thermal insulation layer, below
screed
Typical installation
– Flat duct in the thermal insulation layer
Vitovent 300-W
Dimensions
Length x height x width mm 540 x 843 x 677
Weight kg 39 kg
Heat recovery % up to 90 up to 91 up to 93 up to 91
Moisture recovery % – up to 78 – up to 77
Operation with
– Ventilation unit programming unit, type LB1 Q Q Q Q
– Step switch – – – –
Application areas
– New build Q
– Detached house/two-family house Q
32/33
Vitovent 300-C
Type H32S
B150
Interior up to approx. m2 90
Dimensions
Length x height x width mm 1000 x 198 x 660
Weight kg 25 kg
Heat recovery % up to 90
Moisture recovery % –
Operation with
– Ventilation unit programming unit, type LB1 Q
– Step switch –
Application areas
– New build Q
– Modernisation Q
– Apartments on several floors Q
Specification
Vitovent 200-C
Weight kg 18 20
Heat recovery % up to 95 up to 89
Operation with
– Ventilation unit programming unit, type LB1 Q Q
– Step switch Q Q
Application areas
– New build optional optional
– Modernisation Q Q
– Apartments on several floors Q Q
34/35
Vitovent 300-F
Weight kg 80 kg
Heat recovery % up to 98 up to 89
Moisture recovery % – up to 81
Application areas
– New build Q
– Detached house/two-family house Q
Specification
Vitovent 100-D
Dimensions
Width x Height x Depth (internal cover) mm 200 x 200 x 45
Core drilling diameter mm 162
Wall thickness mm 325
Heat recovery % up to 91
Application areas
– New build Q
– Modernisation Q
– Apartments on several floors Q
36/37
Vitovent 200-D
Dimensions
Width x Height x Depth mm 340 x 340 x 70
Weight kg 4 kg 4 kg 4,3 kg
Heat recovery % up to 90 up to 90 up to 90
Application areas
– New build Q Q Q
– Modernisation Q Q Q
– Apartments on several floors Q Q Q
Viessmann Group
38/39
The company
Viessmann Group