Вы находитесь на странице: 1из 94

STTP SCHEDULE 2017 - 2018

www.nitttrkol.ac.in NITTTR, Kolkata


STTP SCHEDULE 2017 - 2018

TECHNICAL EDUCATION VISION 2020


TECHNICAL EDUCATION MISSION 2020

NITTTR – Kolkata envisions to be the lead resource institute


for promoting excellence in technical education, management
education and vocational education & training system
To introduce emerging scientific technologies for development of effective teaching-learning
system in technical education,
To increase the outreach of training by adopting flexible & Open Learning Technology,
To integrate the world of work with the technical education system,
To assist policy makers as a think-tank in formulating TVET strategies,
To offer extension services and consultancy appropriate to TVET system, in collaboration
with industry and community partnership,
To develop and introduce Quality Management System,
To share experience and collaborate with national and international agencies involved in
technical education for mutual benefits,
To undertake research in different areas of TVET system.

NITTTR, Kolkata www.nitttrkol.ac.in


STTP SCHEDULE 2017 - 2018
About Us
CONTENTS
National Institute of Technical Teachers’ Training & Research (NITTTR), Kolkata was established in 1965 Sl. Page
as Technical Teachers’ Training Institute, Calcutta. This was the first of four such Institutes (other three No Nos.
being at Chandigarh, Bhopal and Chennai) established by the Department of Education, Govt. of India as About Us i
fully centrally funded Autonomous Institution. The primary focus of the Institute is to provide in-service
Preface iii
training to the teachers and staff of Degree and Diploma level technical institutions and conduct activities
related to the quality improvement of the technical education system of the country. NITTTR, Kolkata has Month-wise Programme 1-12
been actively involved in improvement of quality of the technical education system in various states A. National Level Short Term Training
Programmes
including those in the north-east through innovative academic interventions, providing assistance to policy
I. Content Updating (CU) 13-33
makers at the national and state levels, in formulation of educational plans, projects and their
II. Management (MGT) 34
implementation in the fast changing scenario. By virtue of working closely over the last few decades, this
III. Professional Skill Development (PS) 35-38
institute has developed a thorough understanding of the technical educational needs of the states in the
eastern region including those in the north-east. Govt. of India, in 2003, accorded national status to the B. E-Learning Programme 39-42
Institute, in recognition to the expert services rendered for overall improvement of quality of Technical C. State Level Short-Term Training Programmes
Education System. NITTTR, Kolkata acts as a catalyst in introducing changes in the various components at Extension Centres
(i) Bhubaneswar 43-48
of technical education system, plays a proactive role in identifying changes in the industry, technology,
economy and society and acts as a facilitator in this process of change. (ii) Guwahati 49-52
Norms of the Programmes 53
Some of the notable national level projects in which the Institute is associated are Nodal agency to Centrally i). In-House Programmes 53
Sponsored Community Development through Polytechnic Scheme, Designing & conducting AICTE ii). Special Programmes 54
sponsored “Induction Training Programme” for fresh teachers of engineering and polytechnic colleges,
iii). Collaborative Programmes 54
Facilitating implementation of Centrally sponsored Scheme for Integrating Persons with Disabilities (PWD)
in the Mainstream of Technical & Vocational Education etc. Participants’ Profile 459
Financial Norms 54
The focal activities of the Institute are Short Term Training, Curriculum Development, Learning Resources How to Apply 55
Development, Research in the field of Technical Education System, Educational Management and Extension How to Reach NITTTR, Kolkata 56
Services. Besides regular activities, the Institute has been offering, since 2003, AICTE approved M. Tech.
General Instructions 57
Degree Programme in Manufacturing Technology, affiliated to WBUT. During 2005-2006 two more M.
Tech. Programmes namely Multimedia & Software Systems and Mechatronics Engineering were started. Application Form 58
The M. Tech. Programme in Structural Engineering was also started from 2011-2012. The Institute has Faculty Profile 59-86
highly qualified faculty members and excellent infrastructural support in the form of well-equipped E-mail Addresses and Phone 87
laboratories, computers, library facilities, Welding Centre, CAD/CAM and other resources. The institute has Numbers of Faculty Members
two Extension Centres one at Guwahati and the other in Bhubaneswar for reaching out to its clients in the
North-east and Orissa. At present this Institution is also focusing on others, Teachers’ Training through
ICT Mode.

www.nitttrkol.ac.in NITTTR, Kolkata


i
STTP SCHEDULE 2017 - 2018
Faculty and Staff Members of NITTTR, Kolkata

NITTTR, Kolkata www.nitttrkol.ac.in


ii
STTP SCHEDULE 2017 - 2018
Preface
Like previous years, National Institute of Technical Teachers’ Training & Research (NITTTR), Kolkata has prepared its Programme Calendar for the year 2016 – 2017
based on the training need analysis (TNA) conducted for the technical institutes of Eastern Region. The TNA questionnaire was prepared to have feedback on the
attributes like past training experiences, content updating / refreshment advancement in respective subjects / specialization areas and Education, Pedagogy, Teaching
Skill Development, Curriculum Development, Rural & Community Development, Media Development, Maintenance of Office Equipment, Management, Communication
etc.
In order to fulfill the needs of technical teachers of the eastern regions, Trainings will be offered by
Short- Term Training programmes (STTP) in the following modes are 1. Civil Engineering
planned. 2. Computer Science & Engineering
1. Contact mode at NITTTR, Kolkata and/or the extension centres 3. Electrical Engineering
2. ICT-based Programmes 4. Mechanical Engineering and
3. In-House Programmes 5. Education & Educational Management related
4. Demand-based Special Programmes departments
5. Collaborative Programmes

The schedules of the trainings planned in this calendar are not exhaustive. The Institute also offers trainings based on specific needs of various stake holders including
Private Technical Institutes. The Institute also offers In-House training to fulfill the requirement of Faculty Development Programme (FDP) under TEQIP/NEQIP of
various Technical Institutes.
It is intended that all Technical Institutes of the eastern region will come up with their needs and take advantage of services provided by NITTTR, Kolkata. This will
help to upgrade the learning- teaching system of the institutes and in turn, will enrich the education system of the country.

WORKSHOPS CONDUTED 2016-2017


Regional Workshop
3%

Training Need Analysis


Related Curriulum Revision
40% 30%

NBA Related
27%
www.nitttrkol.ac.in NITTTR, Kolkata
iii

Sl. No. Name of the Topics


1. Introduction to MATLAB, SIMULINK, Control System and Image Processing
STTP SCHEDULE 2017 - 2018
Following diagrams represent the focal activities of NITTTR, Kolkata, State-wise distribution of Trainees of STTP and Workshop conducted during the Academic year
2016-17:
State-Wise Distribution of Participants

Andhra Pradesh Arunachal Bihar


Pradesh
A & N Island Delhi
Assam
Gujarat Goa
Hariyana
Jammu &
Kashmir
Jharkhand
West Bengal
Karnataka

Kerala

Madhya Pradesh

Maharastra
Manipur
Meghalaya
Mizoram
Uttarakhand
Odisha Nagland
Uttar Pradesh
Pondicherry
Tripura
Telengana Punjab

Tamil Nadu Rajasthan


Sikkim

NITTTR, Kolkata www.nitttrkol.ac.in


iv

Sl. No. Name of the Topics


Introduction to MATLAB, SIMULINK, Control System and Image Processing
Toolbox
STTP SCHEDULE 2017 - 2018
APRIL, 2017
1st Week 2nd Week 3rd Week 4th Week
Control Systems Analysis & Design using Induction Training
BBSR01

BBSR02
MATLAB [Subrata Chattopadhyay]
[Prasanta Sarkar] (17-04-2017 - 21-04-2017)
(03-04-2017 - 07-04-2017)
Developing Entrepreneurship among Control Systems Analysis & Design

GUW01

GUW02
Students-Role of Polytechnic Teachers using MATLAB
[Sekhar Chakraborty] [Prasanta Sarkar]
(17-04-2017 - 21-04-2017) (24-04-2017 - 28-04-2017)
Testing of Cement, Aggregates and Design and Development of e- Computer Aided Drafting and Software Testing of cement, aggregates
CU01

CU02

CU03

CU06
Concrete (inclusive of demonstration of learning Systems Application in Science and Engineering and Concrete (inclusive of
NDT) – Module – I [Rajeev Chatterjee] [Tushar Kanti Dey] demonstration of NDT)–Module II
[Jagat Jyoti Mandal & Uday Chand Kumar] (10-04-2017 - 21-04-2017) (17-04-2017 - 28-04-2017) [Jagat Jyoti Mandal & Uday Chand
(03-04-2017 - 07-04-2017) Kumar]
(24-04-2017 - 28-04-2017)
AUTOCAD Uses of Computational and

CU04

CU07
[Nirmal Kumar Mandal] Visualization Software in
(17-04-2017 - 21-04-2017) Mathematics
[Kinsuk Giri]
(24-04-2017 - 28-04-2017)
Basics of Thermal Engineering (Thermal Laboratory Experiment and

CU05

CU08
Engineering – I) Students’ Project
[Rayapati Subbarao] [Sagarika Pal]
(17-04-2017 - 21-04-2017 ) (24-04-2017 - 28-04-2017)
Introduction to Robotics

CU09
[Samiran Mandal]
(24-04-2017 - 28-04-2017)
Induction Training - Phase I

PS01
[Habiba Hussain]
(24-04-2017 - 05-05-2017)

www.nitttrkol.ac.in NITTTR, Kolkata 1


STTP SCHEDULE 2017 - 2018
MAY, 2017
1st Week 2nd Week 3rd Week 4th Week 5th Week
Introduction to ETABS Management of CDTP and
BBSR03

BBSR04
Structural Analysis and Design PWD Scheme
Software for Buildings [Uday Chand Kumar]
[Santanu Bhanja] (29-05-2017 - 02-06-2017)
(01-05-2017 - 05-05-2017)
Design of Outcome Based MATLAB Application in

GUW
04
GUW03
Curriculum [Urmila Kar] Engineering [Sagarika Pal]
(15-05-2017 - 19-05-2017) (29-05-2017 - 02-06-2017)
Mathematical Logic Power System Protection Programming and Operations on Coding Theory and Database Design Theory
CU10

CU12

CU13

CU19

CU20
[Samir Roy] and Safety CNC Machines Application and Practice
(01-05-2017 - 05-05-2017) [Prasanta Sarkar] [Nirmal Kumar Mandal] [Rajeev Chatterjee] [Ranjan Dasgupta]
(08-05-2017 - 12-05-2017) (15-05-2017 - 19-05-2017) (22-05-2017 - 26-05-2017) (29-05-2017 - 02-06-2017)
LabVIEW Architecture, Finite Element Method in Management of CDTP and
CU11

CU14

PS02
Programming and its Engineering PWD Scheme
applications in Measurement & [Jagat J. Mandal & Tushar Kanti Dey] [Tushar K. Dey & U. C. Kumar]
Control [Subrata Chattopadhyay] (15-05-2017 - 26-05-2017) (22-05-2017 - 26-05-2017)
(01-05-2017 - 05-05-2017)
Water for Drinking and Impact Development and

CU15

PS03
on Public Health Implementation of Staff
[Sailendra Nath Mandal] training Programme for
(15-05-2017 - 26-05-2017) Polytechnic Teachers
[Sekhar Chakraborty]
(22-05-2017 - 26-05-2017)
Strategic Management Issues in Webpage Design using PHP and Refresher Course on

CU16

PS04
MGT01

Technical Education System MySQL Curriculum Design


[Sukanta Kumar Naskar] [Indrajit Saha] approaches in Technical and
(01-05-2017 - 05-05-2017) (15-05-2017 - 19-05-2017) Vocational Education and
Training (TVET) [Urmila Kar]
(22-05-2017 - 09-06-2017)
Experiments with / without
CU17

Computer Interfacing kit for


Young Engineers and Scientists
[Anuradha De]
(15-05-2017 - 19-05-2017)
8051 Microcontroller & 8085
CU18

Microprocessor Based Projects


[Soumitra Kumar Mandal]
(15-05-2017 - 26-05-2017)

2 NITTTR, Kolkata www.nitttrkol.ac.in


STTP SCHEDULE 2017 - 2018
JUNE, 2017
1st Week 2nd Week 3rd Week 4th Week
Research Methodology Outcome Based Education and

BBSR05

BBSR06
[Subrata Chattopadhyay] Accreditation [Urmila Kar]
(12-06-2017 - 16-06-2017) (19-06-2017 - 23-06-2017)

Analysis of Bottled Water and Testing of Pavement Materials Electromagnetic Waves & their How to write Thesis or Research Paper

CU28

CU36
CU21

CU33
Health [Jagat Jyoti Mandal & Tushar Kanti Dey] Applications [Rayapati Subbarao]
[Sailendra Nath Mandal] (12-06-2017 - 16-06-2017) [Anuradha De] (26-06-2017 - 30-06-2017)
(05-06-2017 - 16-06-2017) (19-06-2017 - 23-06-2017)
Optical Fibre & Laser: Principles Application of Revised Codes IS 1893- Image Processing using MATLAB PIC Microcontroller & 8086
CU22

CU29

CU34

CU37
& Applications Part 1 : 2016 and IS 13920 :2016 in [Indrajit Saha] Microprocessor, Architecture,
[Anuradha De] Earthquake Resistant Design of (19-06-2017 - 30-06-2017) Programming & Interfacing
(05-06-2017 - 09-06-2017) Buildings [Santanu Bhanja] [Soumitra Kumar Mandal]
(12-06-2017 - 23-06-2017) (26-06-2017 - 07-07-2017)
Modelling & Simulation of Computer Numerical Controlled Exposure on SCILAB Basic Computer Applications for Faculty
CU23

CU30

CU35

CU38
Mechatronics System Machines: Constructional Features and [Kinsuk Giri] and Staffs
[Sagarika Pal] Programming (19-06-2017 - 30-06-2017) [Arpan Kr. Mondal]
(05-06-2017 - 09-06-2017) [Nirmal Kumar Mandal] (26-06-2017 - 07-07-2017)
(12-06-2017 - 16-06-2017)
LABVIEW &VHDL Applications in Polymer Composites and Problem Solving and Decision
CU24

CU31

PS06
Engineering Nanocomposites Making
[Soumitra Kumar Mandal] [Subrata Mondal] [Sukanta Kumar Naskar]
(05-06-2017 - 09-06-2017) (12-06-2017 - 16-06-2017) (19-06-2017 - 23-06-2017)
Development of Mechanical Hands on Practice on PLC
CU25

CU32

Engineering Laboratory Programming and Applications


Experiments [Samiran Mandal] [Sagarika Pal]
(05-06-2017 - 09-06-2017) (12-06-2017 - 23-06-2017)
Networking Principles Developing Entrepreneurship Among
CU26

PS05

Management and Administration Students-Role of Polytechnic Teachers


[Rajeev Chatterjee] [Sekhar Chakraborty]
(05-06-2017 - 16-06-2017) (12-06-2017 - 16-06-2017)
Laboratory Practices in
CU27

Mechanical Engineering
[Arpan Kr. Mondal]
(05-06-2017 - 16-06-2017)

www.nitttrkol.ac.in NITTTR, Kolkata 3


STTP SCHEDULE 2017 - 2018
JULY, 2017
1st Week 2nd Week 3rd Week 4th Week
Strategic Management

BBSR07
[Sukanta Kumar Naskar]
(24-07-2017 - 28-07-2017)

Introduction to Coding Theory Air, Water Quality and Health


GUW05

GUW06
[Rajeev Chatterjee] [Sailendra Nath Mandal]
(03-07-2017 - 07-07-2017) (24-07-2017 - 28-07-2017)

Limit State Design of Steel Polytechnic Chemistry Laboratory Total Station Survey and Disaster Management - an awareness
CU39

CU42

CU47

CU52
Structures Practices Introduction to GPS programme for the Polytechnic and
[Mithu Dey] [Sailendra Nath Mandal] [Jagat Jyoti Mandal & Tushar Kanti Dey] Engineering College Teachers
(03-07-2017 - 07-07-2017) (10-07-2017 - 14-07-2017) (17-07-2017 - 21-07-2017) [Tushar Kanti Dey & Uday Chand Kumar]
(24-07-2017 - 28-07-2017)
Software Engineering Semiconductor Devices & Solar PV Refresher Course on Structural Theory and Applications of
CU40

CU43

CU48

CU53
Fundamentals & Application Module Analysis and Design using STAAD. Optimization with SCILAB
Development [Anuradha De] Pro [Santanu Bhanja] [Kinsuk Giri]
[Ranjan Dasgupta] (10-07-2017 - 14-07-2017) (17-07-2017 - 21-07-2017) (24-07-2017 - 28-07-2017)
(03-07-2017 - 14-07-2017)
Modeling and Analysis of Power Generation from Energy Engineering Thermodynamics and Introduction to MATLAB, SIMULINK &
CU41

CU44

CU49

CU54
Electrical Circuits using Pspice Resources its Applications GUI
and MATLAB [Urmila Kar] [Sheela Yadav Rai] [Rayapati Subbarao] [Anuradha De]
(03-07-2017 - 14-07-2017) (10-07-2017 - 14-07-2017) (17-07-2017 - 21-07-2017) (24-07-2017 - 28-07-2017)
Research Methodology in Design and Analysis of Algorithms Exposure on Multimedia Tools for Measurement and Design of Signal
CU45

CU50

CU55
MGT02

Technical Education [Samir Roy] Interactive Presentation Conditioning Circuits


[Habiba Hussain & Samiran Mandal] (10-07-2017 - 21-07-2017) [Indrajit Saha] [Sagarika Pal]
(03-07-2017 - 07-07-2017) (17-07-2017 - 28-07-2017) (24-07-2017 - 28-07-2017)
Laboratory Safety Management Turning, Milling and Drilling Theory and Practices on Machine Membranes for Water Treatment:
CU46

CU51

CU56
MGT03

[Subrata Mondal] [Dipankar Bose & Samiran Mandal] Tools, CNC and Modern Welding Challenges and Opportunities
(03-07-2017 - 14-07-2017) (10-07-2017 - 21-07-2017) Methods [Subrata Mondal]
[Arpan Kr. Mondal] (24-07-2017 - 28-07-2017)
(17-07-2017 - 28-07-2017)
Essentials of Human Resource Basic Managerial Skills for Teachers
PS07

MGT04
Management [Habiba Hussain]
[Sukanta Kumar Naskar] (17-07-2017 - 28-07-2017)
(10-07-2017 - 14-07-2017)

4 NITTTR, Kolkata www.nitttrkol.ac.in


STTP SCHEDULE 2017 - 2018
AUGUST, 2017
1st Week 2nd Week 3rd Week 4th Week 5th Week
Advanced Process Control & Quality Improvement in Theory and Operation of DC

BBSR08

BBSR09

BBSR10
Instrumentation System institutional activities Machines & Transformers
[Subrata Chattopadhyay] [Sekhar Chakraborty] [Subrata Chattopadhyay]
(07-08-2017 - 11-08-2017) (14-08-2017 - 18-08-2017) (21-08-2017 - 25-08-2017)
Concept Teaching in

GUW07
Fluid Mechanics
[Dipankar Bose]
(28-08-2017 - 01-09-2017)
Fundamentals of Laboratory Practice on Concrete and Power System Geotechnical Investigation and Instrumental
CU57

CU58

CU63

CU66

CU71
Manufacturing System Demonstration of NDT Protection Testing (inclusive of various lab Techniques of Air and
[Nirmal Kumar Mandal] [Mithu Dey & Uday Chand Kumar] [Soumitra Kumar Mandal] and field tests on soil) Module - I Water quality Analysis
(31-07-2017 – 04-08-2017) (07-08-2017 - 11-08-2017] 14-08-2017 - 18-08-2017 [Jagat Jyoti Mandal] Sailendra Nath Mandal
(21-08-2017 - 25-08-2017) (28-08-2017 - 08-09-2017)
Design and Electrical Safety & Code of Practices Renewable Energy Formal Languages and Automata
CU59

CU64

CU67
PS08

Implementation of [Prasanta Sarkar] Sources and Emerging [Samir Roy]


Outcome Based (07-08-2017 - 11-08-2017) Technologies (21-08-2017 - 25-08-2017)
Curriculum [Urmila Kar] [Sheela Yadav Rai]
(31-07-2017-11-08-2017 (14-08-2017 - 18-08-2017)
Fluid Power Teaching of Theory of Fibre Optic Communication
CU60

CU65

CU68
[Dipankar Bose] Machines and Mechanism [Anuradha De]
(07-08-2017- 11-08-2017) [Samiran Mandal] (21-08-2017 - 25-08-2017)
(14-08-2017 - 18-08-2017)
Thermal Engineering Systems Functional Textiles and
CU61

CU69
[Rayapati Subbarao] Protections
(07-08-2017 - 11-08-2017) [Subrata Mondal]
(21-08-2017 - 25-08-2017)
IP Networking Application of MATLAB Control
CU62

CU70
[Rajeev Chatterjee] System, Image Processing and
(07-08-2017 - 18-08-2017) Fuzzy Logic Tool Box
[Urmila Kar & Sagarika Pal]
(21-08-2017 - 01-09-2017)
Student Mentorship Effective Training
PS09

PS10
[Habiba Hussain] [Sukanta Kumar Naskar]
(07-08-2017 - 11-08-2017) (21-08-2017 - 25-08-2017)
Environmental Pollution and Impact on Arc Welding Process
ICT01

ICT02
Public Health [Arpan Kumar Mondal]
[Sailendra Nath Mandal] (21-08-2017 – 25-08-2017)
(07-08-2017 - 11-08-2017)

www.nitttrkol.ac.in NITTTR, Kolkata 5


STTP SCHEDULE 2017 - 2018
SEPTEMBER, 2017
1st Week 2nd Week 3rd Week 4th Week
Power Generation from Energy Resources
BBSR11

[Sheela Yadav Rai]


(04-09-2017 - 08-09-2017)

Laboratory & Workshop Manual for Electrical, Waste Water Treatment: Pollution Control Designing Assessment tools for effective
GUW08

GUW09

GUW10
Electronic and Instrumentation Engineering and Reuse implementation of Technical Curriculum
[Soumitra Kumar Mandal] [Subrata Mondal] [Urmila Kar]
(04-09-2017 - 08-09-2017) (11-09-2017 - 15-09-2017) (18-09-2017 - 22-09-2017)
Experiments with / without Computer Geotechnical Investigation and Testing Modernization of Chemistry and
CU72

CU75

CU80
Interfacing Kit for Young Engineers and (inclusive of various lab and field tests on Environmental Pollution Testing Laboratory
Scientists soil) – Module II [Sailendra Nath Mandal]
[Anuradha De] [Jagat Jyoti Mandal] (18-09-2017- 22-09-2017)
(04-09-2017 - 08-09-2017) (11-09-2017 - 15-09-2017)
Developments in Power Plants and Alternative Laboratory Practice on Civil Engineering Advanced Course on Structural Analysis and
CU73

CU76

CU81
Fuels Materials (Bricks, Aggregates, Cement & Design Software – STAAD.Pro
[Rayapati Subbarao] Concrete) [Santanu Bhanja]
(04-09-2017 - 08-09-2017) [Mithu Dey & Uday Chand Kumar] (18-09-2017 - 22-09-2017)
(11-09-2017 - 15-09-2017)
Theory and Practices on Various Welding Numerical and Statistical Methods for MATLAB for Data Analytics
CU74

CU77

CU82
Processes, Machine Tools and CNC Technical Teachers with SCILAB [Indrajit Saha]
[Arpan Kr. Mondal] [Kinsuk Giri] (18-09-2017 - 22-09-2017)
(04-09-2017 - 15-09-2017) (11-09-2017 - 15-09-2017)
Quality Improvement in Institutional activities Computer Aided Design with Ansys Physics of Materials
CU78

CU83
PS11

[Sekhar Chakraborty] [Nirmal Kumar Mandal] [Anuradha De]


(04-09-2017 - 15-09-2017) (11-09-2017 - 15-09-2017) (18-09-2017 - 22-09-2017)
Control Systems Analysis & Design using
CU79

MATLAB [Prasanta Sarkar]


(11-09-2017 - 22-09-2017)
Institutional Management
MGT05

[Sukanta Kumar Naskar]


(11-09-2017 - 15-09-2017)

Leadership & Team Building in Academia


PS12

[Habiba Hussain]
(11-09-2017 - 15-09-2017)
Static and Dynamic Analysis of Seismic Laboratory Instruction
ICT03

ICT04
Resistant RCC Buildings [Soumitra Kumar Mandal]
[Santanu Bhanja] (18-09-2017 - 22-09-2017)
(11-09-2017 - 15-09-2017)

6 NITTTR, Kolkata www.nitttrkol.ac.in


STTP SCHEDULE 2017 - 2018

OCTOBER, 2017
1st Week 2nd Week 3rd Week 4th Week 5th Week
Application of MATLAB, Control Laboratory

BBSR12

BBSR13
System, Image Processing and Fuzzy Development
Logic Tool box [Subrata Chattopadhyay]
[Sagarika Pal] (16-10-2017 - 20-10-2017)
(09-10-2017 - 13-10-2017)
Gradation of Students Machine Learning and It’s Applications

GUW11

GUW12
Performance [Indrajit Saha]
[Samiran Mandal] (23-10-2017 - 27-10-2017)
(16-10-2017 - 20-10-2017)
Introduction to ETABS PLC and its Applications Fundamentals of Limit State Method of Development of Laboratory
CU84

CU88

CU89

CU194
Structural Analysis and Design [Soumitra Kumar Mandal] Design of RC Structures with Special Instruction Sheet for
Software for Buildings (16-10-2017 - 20-10-2017) Emphasis on Load and Capacity design Metrology
[Santanu Bhanja] [Santanu Bhanja] [Samiran Mandal]
(09-10-2017 - 13-10-2017) (23-10-2017 - 27-10-2017) (30-10-2017 - 03-11-2017)
Advance Programming in C Semiconductor Devices & Solar PV
CU85

CU90
[Rajeev Chatterjee] Module [Anuradha De]
(09-10-2017 - 13-10-2017) (23-10-2017 - 27-10-2017)
PLC Architecture, Programming and Experimentation and Experimental Data
CU86

CU91
its applications in Measurement & Analysis [Nirmal Kumar Mandal]
Control (23-10-2017 - 27-10-2017)
[Subrata Chattopadhyay]
(09-10-2017 - 13-10-2017)
Testing & Characterisation of Building Solid Waste and Wastewater Treatment
CU87

CU92
Materials [bricks, water, cement, [Sailendra Nath Mandal]
aggregates, steel & concrete] (23-10-2017 - 03-11-2017)
[Jagat Jyoti Mandal & Tushar Kanti Dey]
(09-10-2017 - 20-10-2017)
Designing Student Centered Mathematics and Computations

CU93
PS13

Instruction [Habiba Hussain] [Samir Roy & Kinsuk Giri]


(09-10-2017 - 13-10-2017) (23-10-2017 - 03-11-2017)
Research Methodology in Management

MGT06
[Sukanta Kumar Naskar]
(23-10-2017 - 27-10-2017)
Engineering Thermodynamics
ICT05

[Rayapati Subbarao]
(09-10-2017 - 13-10-2017)

www.nitttrkol.ac.in NITTTR, Kolkata 7


STTP SCHEDULE 2017 - 2018
NOVEMBER, 2017
1st Week 2nd Week 3rd Week 4th Week
Topics in Discrete Mathematics Testing Drinking Water for Domestic Theory, Operation and Applications of Engineering
BBSR14

BBSR15

BBSR17
BBSR16
[Kinsuk Giri] Use Transducers & Actuators in Industry Thermodynamics
(06-11-2017 - 10-11-2017) [Sailendra Nath Mandal] (Subrata Chattopadhyay) [Rayapati Subbarao]
(13-11-2017 - 17-11-2017) (20-11-2017 – 24-11-2017) (27-11-2017 - 01-12-2017)
Fundamental Concepts of Geotechnical Application of Auto CAD in Estimating & Costing of Non-
GUW13

GUW14

GUW15
Engineering Engineering Drawing Conventional Energies
[Jagat Jyoti Mandal] [Tushar Kanti Dey]
[Sheela Yadav Rai]
(06-11-2017 - 10-11-2017) (13-11-2017 - 17-11-2017)
(20-11-2017 - 24-11-2017)
Optical Fibre & Laser: Principles & Applications Object Oriented Software Design Design of Payroll Systems using
CU95

CU10
1

CU10
4
[Anuradha De] [Samir Roy] ORACLE [Ranjan Dasgupta]
(06-11-2017 - 10-11-2017) (13-11-2017 - 17-11-2017) (20-11-2017 - 01-12-2017)
Industrial automation using PLC, DCS & SCADA Introduction to MATLAB, SIMULINK Application of MATLAB in Modeling
CU96

CU102

CU105
[Sagarika Pal] & GUI and Analysis of Control Systems
(06-11-2017 - 10-11-2017) [Anuradha De] [Urmila Kar]
(13-11-2017 - 17-11-2017) (20-11-2017 - 01-12-2017)
Estimating & Costing of Non-Conventional Laboratory Experiment on Electrical Occupational Health and Safety
CU97

CU103

MGT07
Energies [Sheela Yadav Rai] Machine and Power System [Prasanta Issues - an Awareness programme
(06-11-2017 - 10-11-2017) Sarkar] for the Polytechnic and Engineering
(13-11-2017 - 17-11-2017) College Teachers
[Tushar Kanti Dey & Uday Chand Kumar]
(20-11-2017 - 24.11.2017)
Hydraulic Machines Making Effective Presentations
CU98

PS15

[Dipankar Bose] [practice based training]


(06-11-2017- 10-11-2017) [Sekhar Chakraborty]
(13-11-2017 - 17-11-2017)
CAD/CAM
CU99

[Nirmal Kumar Mandal]


(06-11-2017 - 10-11-2017)

Thermal Sciences Lab


CU100

[Rayapati Subbarao]
(06-11-2017 - 10-11-2017 )

Outcome Based Assessment


PS14

[Habiba Hussain]
(06-11-2017 - 10-11-2017)

Designing Effective Teaching under Outcome Organizational Behaviour Effective Training


ICT06

ICT07

ICT08

Based Education [Urmila Kar] [Mithu Dey] [Sukanta Kumar Naskar]


(06-11-2017 - 10-11-2017) (13-11-2017 - 17-11-2017) (20-11-2017 - 24-11-2017)

8 NITTTR, Kolkata www.nitttrkol.ac.in


STTP SCHEDULE 2017 - 2018
DECEMBER, 2017
1st Week 2nd Week 3rd Week 4th Week
Modeling and Analysis of Control Analysis and Design of Foundation Systems Disaster Management - an Awareness Programme
BBSR18

BBSR19

BBSR20
Systems using MATLAB [Jagat Jyoti Mandal] for the Polytechnic and Engineering College
[Urmila Kar] (11-12-2017 - 15-12-2017) Teachers
(04-12-2017 - 08-12-2017) [Uday Chand Kumar]
(18-12-2017 - 22-12-2017)
Strategic Management

GUW16
[Sukanta Kumar Naskar]
(18-12-2017 - 22-12-2017)

Application of MATLAB in Engineering Introduction to IS 800-2007 Surveying by Total Station with an introduction to
CU106

CU108

CU111
[Prasanta Sarkar] [Mithu Dey] Digital Geographical Positioning System
(04-12-2017 - 08-12-2017) (11-12-2017 - 15-12-2017) [Santanu Bhanja]
(18-12-2017 - 22-12-2017)
Operation and maintenance of Preparation of Laboratory Manual for Active Network
CU107

CU109

CU112
different Water, Air and Petrochemical Electrical, Electronics and Instrumentation [Prasanta Sarkar]
Testing Equipment Engineering [Sagarika Pal] (18-12-2017 - 22-12-2017)
[Sailendra Nath Mandal] (11-12-2017 - 15-12-2017)
(04-12-2017 - 15-12-2017)
Advanced Welding Processes, NDT, CNC and Renewable Energy Sources and Emerging
CU110

CU113
Mechanical Testing Technologies [Sheela Yadav Rai]
[Arpan Kr. Mondal] (18-12-2017 - 22-12-2017)
(11-12-2017 - 22-12-2017)
Effective Teaching Laboratory & Workshop Manual for Electrical,
PS16

CU114
[Habiba Hussain] Electronics and Instrumentation Engineering
(11-12-2017 - 15-12-2017) [Soumitra Kumar Mandal]
(18-12-2017 – 22-12-2017)
Laboratory Manual Preparation (Mechanical

CU115
Engineering) [Dipankar Bose]
(18-12-2017 - 22-12-2017)
Research Methodology in Engineering and Technical

CU116
Writing using LaTeX
[Kinsuk Giri & Indrajit Saha]
(18-12-2017 - 29-12-2017)
Computations and Optimization in Engineering with
CU117 MATLAB [Nirmal Kumar Mandal]
(18-12-2017 - 29-12-2017)
Fluid Mechanics & Machinery
ICT09

[Dipankar Bose]
(04-12-2017 - 08-12-2017)

www.nitttrkol.ac.in NITTTR, Kolkata 9


STTP SCHEDULE 2017 - 2018
JANUARY, 2018
1st Week 2nd Week 3rd Week 4th Week
Design of Concrete Mix Developments of Advanced Control System

BBSR22

BBSR23
BBSR21
[Tushar Kanti Dey] Laboratory Instructions with MATLAB Simulation
(08-01-2018 - 12-01-2018) [Nirmal Kumar Mandal] [Prasanta Sarkar]
(22-01-2018 - 27-01-2018) (29-01-2018 - 02-02-2018)
How to write Thesis or Research Advanced Control System with Approaches in Developing

GUW18

GUW19
GUW17
paper MATLAB Simulation Technical Curricula
[Rayapati Subbarao] [Prasanta Sarkar] [Sukanta Kumar Naskar]
(08-01-2018 - 12-01-2018) (15-01-2018 - 19-01-2018) (29-01-2018 - 02-02-2018)
Application of Soft tools in Repair and Rehabilitation of Power System Protection Introduction to Mechanical Measurement and
CU118

CU127

CU128

CU129
CU120
Engineering Structures [Sheela Yadav Rai] Computational Control
[Jagat Jyoti Mandal & Tushar [Santanu Bhanja & Uday Chand (15-01-2018 - 19-01-2018) Intelligence [Samiran Mandal]
Kanti Dey] Kumar] [Samir Roy & Indrajit Saha] (29-01-2018 - 02-02-2018)
(01-01-2018 - 12-01-2018) (08-01-2018 - 12-01-2018) (22-01-2018 - 02-02-2018)
Fundamentals and LABVIEW & MATLAB Applications Outcome Based Education & Microteaching for improving
CU119

PS17

PS18
CU121

Applications of in Engineering Accreditation Teaching Skills


Nanomaterials [Sagarika Pal] [Habiba Hussain] [Habiba Hussain]
[Subrata Mondal] (08-01-2018 - 12-01-2018) (15-01-2018 - 19-01-2018) (29-01-2018 - 02-02-2018)
(01-01-2018 - 12-01-2018)
Machines and Drives
CU122

[Soumitra Kumar Mandal]


(08-01-2018 - 12-01-2018 )
Non Traditional Machining
CU123

Processes [Dipankar Bose]


(08-01-2018 - 12-01-2018)

Introduction to DBMS
CU124

[Ranjan Dasgupta]
(08-01-2018 - 19-01-2018)

Drafting and Research Tools for


CU125

Engineer and Scientists


[Arpan Kr. Mondal]
(08-01-2018 - 19-01-2018)
Modelling of Engineering Systems
CU126

[Nirmal Kumar Mandal]


(08-01-2018 - 19-01-2018)
Theory and Operations of
ICT10

Sensors, Transducers &


Actuators
[Subrata Chattopadhyay]
(15-01-2018 - 19-01-2018)

10 NITTTR, Kolkata www.nitttrkol.ac.in


STTP SCHEDULE 2017 - 2018
FEBRUARY, 2018
1st Week 2nd Week 3rd Week 4th Week
Introduction to Coding Theory Application of Revised Code IS Cyber Security
BBSR24

BBSR25

BBSR26
[Rajeev Chatterjee] 1893-Part 1 : 2016 in Earthquake [Indrajit Saha]
(05-02-2018 - 09-02-2018) Resistant Design of Buildings (26-02-2018 - 02-03-2018)
[Santanu Bhanja]
(19-02-2018 - 23-02-2018)
Arc Welding Processes Evaluating Students’ Performance &
GUW20

GUW21
[Arpan Kr. Mondal] Designing Question Papers
(05-02-2018 - 09-02-2018) [Habiba Hussain]
(12-02-2018 - 16-02-2018)
Discrete Mathematics and Its Application of Auto CAD in Engineering Power System Analysis
CU130

CU133

CU137
Applications and basic Sciences [Sheela Yadav Rai]
[Kinsuk Giri] [Mithu Dey & Uday Chand Kumar] (26-02-2018 - 02-03-2018)
(05-02-2018 - 09-02-2018) (12-02-2018 - 16-02-2018)
Thesis Writing Power Generation from Energy Resources Induction Training – Phase II
CU131

CU134
[Rayapati Subbarao] [Sheela Yadav Rai] (26-02-2018 – 09/03/2018)

PS20
(05-02-2018 - 09-02-2018) (12-02-2018 - 16-02-2018)

Refresher Course in Engineering Skill Development in Workshop


CU132

CU135

Mechanics & Strength of Material [Dipankar Bose]


[Jagat Jyoti Mandal & Tushar Kanti Dey] (12-02-2018 - 16-02-2018)
(05-02-2018 - 16-02-2018)
Design of Question Bank for effective Design and Development of MOOC based
CU136
PS19

implementation of Technical Curriculum e-content


[Urmila Kar] [Ranjan Dasgupta & Samir Roy]
(05-02-2018 - 16-02-2018) (12-02-2018 - 23-02-2018)
Automated Manufacturing Systems Laboratory Safety Management
ICT11

ICT12
[Nirmal Kumar Mandal] [Subrata Mondal]
(05-02-2018 - 09-02-2018) (19-02-2018 - 23-02-2018)

www.nitttrkol.ac.in NITTTR, Kolkata 11


STTP SCHEDULE 2017 - 2018
MARCH, 2018
1st Week 2nd Week 3rd Week 4th Week
Teaching of Engineering Mechanics Intelligent Textile Materials Hydraulics & Pneumatics Approaches in Developing Technical
BBSR27

BBSR28

BBSR29

BBSR30
[Samiran Mandal] [Subrata Mondal] [Dipankar Bose] Curriculum
(05-03-2018 - 09-03-2018) (12-03-2018 - 16-03-2018) (19-03-2018 - 23-03-2018) [Sukanta Kumar Naskar]
(26-03-2018 - 30-03-2018)

Topics in Discrete Making Effective Presentations Advanced Process Control &

GUW22

GUW23

GUW24
Mathematics [practice based training] Instrumentation System
[Kinsuk Giri] [Sekhar Chakraborty] [Subrata Chattopadhyay]
(12-03-2018 - 16-03-2018) (19-03-2018 - 23-03-2018) (26-03-2018 - 30-03-2018)

Applied Thermodynamics (Thermal Teaching – Learning of Computer Drawing, Analysis and Design of

CU139

CU141
CU138

Engineering – II) Science in Indian Context structures by Limit State Method using
[Rayapati Subbarao] [Samir Roy & Rajeev Chatterjee] Software [Mithu Dey]
(05-03-2017 - 09-03-2017) (19-03-2018 - 23-03-2018) (26-03-2018 - 30-03-2017)

Panchayat Polytechnic Interaction in Rural Automobile Engineering Topics on Computer Architecture &
PS21

CU140

CU142
Development [Samiran Mandal] Organization (Theoretical Discussion)
[Uday Chand Kumar] (19-03-2018 - 23-03-2018) [Ranjan Dasgupta]
(05-03-2018 - 10-03-2018) (26-03-2018 - 30-03-2018)

Control & Automation Review Course on Soil Various Schemes - Implementation Renewable Energy Sources and
ICT13

ICT14

ICT15

ICT16
[Sagarika Pal] Mechanics through Polytechnics Emerging Technologies
(05-03-2018 - 09-03-2018) [Jagat Jyoti Mandal] [Tushar Kanti Dey] [Sheela Yadav Rai]
(12-03-2018 - 16-03-2018) (19-03-2018 - 23-03-2018) (26-03-2018 - 30-03-2018)

12 NITTTR, Kolkata www.nitttrkol.ac.in


STTP SCHEDULE 2017 - 2018
A. NATIONAL LEVEL SHORT TERM TRAINING PROGRAMMES

The schedule of Short Term Training Programmes (STTP) to be conducted by NITTTR, Kolkata during the year 2017– 2018 is given below.

I. CONTENT UPDATING (CU) VENUE: NITTTR, KOLKATA


Date

Week
Sl. Prog Programme
Programme Title Programme Objectives
No Code Co-ordinator (s) From To
1. CU01 Testing of Cement, Jagat Jyoti Mandal & 03-04-2017 07-04-2017 1 After attending the course the participants will be able to
Aggregates and Concrete Uday Chand Kumar  explain basic concepts on laboratory tests of cement, curriculum.
(inclusive of demonstration  guide students in conducting different laboratory experiments for
determination of various parameters.
of NDT) – Module – I
 demonstrate different tests on cement, aggregates and concrete.
2. CU02 Design and Development Rajeev Chatterjee 10-04-2017 21-04-2017 2 After going through this program the participants will be able to
of e-learning Systems  explain the concept of e-learning,
 design the basic requirement of ICT infrastructure for e-learning,
 explain synchronous and asynchronous e-learning models,
 explain the various standards available for e-learning,
 explain the basis terminologies such as Learning Objects, sharable Content
Objects, SCORM,
 explain and demonstrate ADDIE Model of ISD demonstrate the various
concept of e-content, LMS, interactive Multimedia Presentation,
 develop e-content chunks / learning object in their own subject domain,
 implement the curriculum for effective instructional design,
 design and develop e-content using various standards, tools and technique,
and
 exhibit and demonstrate the process of e-content creation.
3. CU03 Computer Aided Drafting Tushar Kanti Dey 17-04-2017 28-04-2017 2 After attending the course the participants will be able to
and Software Application in  draw basic drawing
Science and Engineering  draw different sections of structures
 draw 2D and 3D drawing
4. CU04 AUTOCAD Nirmal Kumar Mandal 17-04-2017 21-04-2017 1 After attending the programme the participants will be able to
 use the various drafting and editing tools
 draw Engineering products
5. CU05 Basics of Thermal Rayapati Subbarao 17-04-2017 21-04-2017 1 At the end of the programme, the participants will be to:
Engineering (Thermal  paraphrase the basics of thermodynamics.
 apply laws of thermodynamics in various problems.
Engineering – I)  appreciate more about entropy.
 identify and analyze thermodynamic air cycles.

www.nitttrkol.ac.in NITTTR, Kolkata 13


STTP SCHEDULE 2017 - 2018
Date

Week
Sl. Prog Programme
Programme Title Programme Objectives
No Code Co-ordinator (s) From To
6. CU06 Testing of cement, Jagat Jyoti Mandal & 24-04-2017 28-04-2017 1 After attending the course the participants will be able to
aggregates and Concrete Uday Chand Kumar  explain basic concepts on laboratory tests of concrete as per requirement of
(inclusive of demonstration civil engineering Diploma curriculum
 explain basic concepts on non-destructive tests (NDT) on concrete
of NDT) – Module II
 guide students in conducting different laboratory experiments related to
concrete for determination of various parameters
 demonstrate different tests on concrete (laboratory & NDT)
7. CU07 Uses of Computational Kinsuk Giri 24-04-2017 28-04-2017 1 After attending the program, the participants will be able to
and Visualization Software  handle SCILAB in various mathematical problem solving
in Mathematics  use some other open source mathematical software
 visualize various functions and multidimensional data files using GNUPLOT
and XMGRACE
8. CU08 Laboratory Experiment and Sagarika Pal 24-04-2017 28-04-2017 1 After attending the course the participants will be able to
Students’ Project  select the laboratory experiments and projects as per curriculum
 perform experiments and record the data properly
 prepare laboratory manual for different experiments
 guide student to perform project work
 write project report in proper format
 evaluate the laboratory and project performance of students
9. CU09 Introduction to Robotics Samiran Mandal 24-04-2017 28-04-2017 1 After attending the programme, the participants will be able to
 describe the construction of industrial robots
 explain the applications of industrial robots
 assess the economic justification of robot
10. CU10 Mathematical Logic Samir Roy 01-05-2017 05-05-2017 1 After completing the programme the participant will be able to
 explain Mathematical Logic in classroom
 solve problems related to Mathematical Logic
 apply Mathematical Logic in real life problem
11. CU11 LabVIEW Architecture, Subrata 01-05-2017 05-05-2017 1 After attending the course the participants will be able to
Programming and its Chattopadhyay  familiar with the features, dataflow programming, and common LabVIEW
applications in architectures.
 develop test and measurement, data acquisition, instrument control, data
Measurement & Control
logging, and measurement analysis applications using LabVIEW
 describe and develop interfacing of input output devices with LabVIEW
 implement the LabVIEW in Measurement & Control System and its trouble
shooting
 create applications using a state machine.
 design pattern to acquire, process, display, and store real-world data
12. CU12 Power System Protection Prasanta Sarkar 08-05-2017 12-05-2017 1 After attending the programme, the participants will be able to
and Safety  familiarize with various power system protection schemes
 analysis performance characteristics of relays used in power system
protection
 develop power system protection schemes for electrical installation
 familiarize with electrical safety and code of practices.

14 NITTTR, Kolkata www.nitttrkol.ac.in


STTP SCHEDULE 2017 - 2018
Date

Week
Sl. Prog Programme
Programme Title Programme Objectives
No Code Co-ordinator (s) From To
13. CU13 Programming and Nirmal Kumar Mandal 15-05-2017 19-05-2017 1 After attending the programme the participants will be able to
Operations on CNC  explain CNC Technology.
Machines  develop programs in CNC Lathe.
 operate CNC Lathe.
14. CU14 Finite Element Method in Jagat Jyoti Mandal & 15-05-2017 26-05-2017 2 After attending the course the participants will be able to
Engineering Tushar Kanti Dey  explain basic concepts of Finite Element Method
 apply these concepts to solve simple problems
 use of standard FEM software
 impart acquired knowledge to teach and solve problems in a systematic
manner
15. CU15 Water for Drinking and Sailendra Nath Mandal 15-05-2017 26-05-2017 2 After attending the programme the participants will be able to acquire –
Impact on Public Health  knowledge of basic concept of drinking water, sampling, preservation,
analysis, interpretation of result, national and international standards, Water
Contaminants – monitoring, control and impacts on health, treatment
techniques for production of safe drinking water
 skill of handling equipment, performing experiments, interpreting results,
preparing test report, providing laboratory instructions to develop inquiring
attitude among the student and evaluation of laboratory performance in
related to water analysis/treatment laboratory,
 attitude of hand-on working in the laboratory/field
16. CU16 Webpage Design using PHP Indrajit Saha 15-05-2017 19-05-2017 1 After attending the program, the participants will be able to
and MySQL  describe the fundamentals of PHP and MySQL
 design and develop dynamic webpages
 explain PHP and MySQL in classroom
17. CU17 Experiments with / without Anuradha De 15-05-2017 19-05-2017 1 After attending the programme, the participants will be able to
Computer Interfacing kit  use EXPeyes, an interfacing kit for Computer based experiments
for Young Engineers and  perform some experiments of Basic Physics / Electronics with computer
interfacing kit
Scientists
 write simple programme using Python software and perform experiments
 perform some Applied Physics experiments & develop instructional manual
18. CU18 8051 Microcontroller & Soumitra Kumar 15-05-2017 26-05-2017 2 After attending the programme, the participants will be able to
8085 Microprocessor Based Mandal  describe Architecture and Programing of 8051 microcontroller and 8086 Micro-
Projects processors.
 design Interfacing circuits for Microcontroller and Microprocessor Based
Projects
 write Assembly Language programmes.
19. CU19 Coding Theory and Rajeev Chatterjee 22-05-2017 26-05-2017 1 After going through this program the participants will be able to
Application  explain Information, quality of Information, information entropy,
 demonstrate the Working principles and design of AES and DES,
 demonstrate various encoding algorithm like Arithmetic Huffman, Hamming,
Gray, and
 demonstrate the application on various network applications.

www.nitttrkol.ac.in NITTTR, Kolkata 15


STTP SCHEDULE 2017 - 2018
Date

Week
Sl. Prog Programme
Programme Title Programme Objectives
No Code Co-ordinator (s) From To
20. CU20 Database Design Theory Ranjan Dasgupta 29-05-2017 02-06-2017 1 After attending the course the participants will be able to
and Practice  get exposure in database design theory
 design and develop small database application
21. CU21 Analysis of Bottled Water Sailendra Nath Mandal 05-06-2017 16-06-2017 2 After attending the programme the participants will be able to acquire –
and Health  knowledge of different bottled water, classification quality parameters,
sampling, preservation, analysis, interpretation of result and human health,
different water treatment methods,
 skill of handling equipment, performing experiments, interpreting results,
preparing test report, providing laboratory instructions to develop inquiring
attitude among the student and evaluation of laboratory performance in
related to water analysis/treatment laboratory,
 attitude of hand-on working in the laboratory/field
22. CU22 Optical Fibre & Laser: Anuradha De 05-06-2017 09-06-2017 1 After attending the programme, the participants will be able to
Principles & Applications  identify the characteristics of optical fibre,, advantages, disadvantages
 explain the basic principle of Laser, Properties, Types, characteristics and
related hazards
 list the various applications of laser with / without optical fibre
 state the technologies used in optical communication with optical fibre
 develop an in-depth knowledge about optical fibre & laser by performing
various experiments & through field visit
23. CU23 Modelling & Simulation of Sagarika Pal 05-06-2017 09-06-2017 1 After attending the programme, the participants will be able to
Mechatronics System  develop mathematical model of electrical system, Electro-mechanical system,
active and passive electrical network etc.
 develop mathematical model of mechanical system, Fluid, Thermal and
Hydraulic system.
 familiarize with actuators and controllers
 analysis, design and integration of dynamic system.
24. CU24 LABVIEW &VHDL Soumitra Kumar 05-06-2017 09-06-2017 1 After completing the course the participant will be able to
Applications in Engineering Mandal  understand fundamentals of LABVIEW & VHDL
 implement LABVIEW & VHDL applications in Engineering
25. CU25 Development of Mechanical Samiran Mandal 05-06-2017 09-06-2017 1 After attending the programme, the participants will be able to
Engineering Laboratory  classify the laboratory experiments
Experiments  develop laboratory experiments
 prepare laboratory instruction sheets
 evaluate laboratory skills
26. CU26 Networking Principles Rajeev Chatterjee 05-06-2017 16-06-2017 2 After going through this program the participants will be able to
Management and  explain the various topologies and media of computer Network
Administration  explain a network and Internetwork,
 explain the various protocols in TCP/IP suite,
 explain the concept of switching and routing,
 demonstrate the basic techniques of network management,
 explain the concept of basic network security, and
 explain Software Defined Network
16 NITTTR, Kolkata www.nitttrkol.ac.in
STTP SCHEDULE 2017 - 2018
Date

Week
Sl. Prog Programme
Programme Title Programme Objectives
No Code Co-ordinator (s) From To
27. CU27 Laboratory Practices in Arpan Kr. Mondal 05-06-2017 16-06-2017 2 After attending the programme the participants will be able to
Mechanical Engineering  expalin various testing methods.
 describe various mechanical testing methods.
 perform various experiments in mechanical engineering.
28. CU28 Testing of Pavement Jagat Jyoti Mandal & 12-06-2017 16-06-2017 1 After attending the course the participants will be able to
Materials Tushar Kanti Dey  explain basic concepts on laboratory and field tests of different material
required for construction of Subgrade, Base, Sub base and
 bituminous layer of pavements as per requirement of Civil engineering
curriculum
 guide students in conducting different laboratory and field tests to construction
of pavements
29. CU29 Application of Revised Santanu Bhanja 12-06-2017 23-06-2017 2 After attending the programme the participants will be able to —
Codes IS 1893-Part 1 : 2016  understand the modifications suggested as per the revised (2016) Standard of
and IS 13920 :2016 in IS:1893 Part 1 with respect to its 2002 version
Earthquake Resistant  appreciate the underlying principles of earthquake resistant design of R. C.
Design of Buildings buildings
 differentiate between Static and Dynamic analysis and know the domain of
their application
 use different software in seismic analysis and design as per IS 1893-Part 1
:2016
 design RC elements for earthquake resistance and investigate their behavior
up to the failure levels
 detail reinforcement in concrete to improve its ductility
 understand the modifications suggested as per the revised (2016) Standard of
IS:13920 with respect to its 1993 version
 understand the fundamental principles for design under seismic forces and
differentiate them from design against other types of loads
Participants will be awarded a complete unlimited licensed version of
STAAD.Pro v8i SS6 for personal use on their PC’s for full one year for
academic purpose
30. CU30 Computer Numerical Nirmal Kumar Mandal 12-06-2017 16-06-2017 1 After attending the programme the participants will be able to
Controlled Machines:  identify Machining Centre.
Constructional Features  develop programs on CNC Vertical machining Centre.
 operate machining Centre.
and Programming
31. CU31 Polymer Composites and Subrata Mondal 12-06-2017 16-06-2017 1 After attending this program, participants would be able to:
Nanocomposites  explain the fundamental concept of nanotechnology.
 differentiate the microfillers and nanofillers.
 explore the fundamental of composites and nanocomposites.
 exaplain the properties of composites and nanocomposites.
 explain the applications of composites and nanocomposites etc.

www.nitttrkol.ac.in NITTTR, Kolkata 17


STTP SCHEDULE 2017 - 2018
Date

Week
Sl. Prog Programme
Programme Title Programme Objectives
No Code Co-ordinator (s) From To
32. CU32 Hands on Practice on PLC Sagarika Pal 12-06-2017 23-06-2017 2 After completing the course the participant will be able to
Programming and  explain working principle of PLC
Applications  describe architecture of PLC system
 develop PLC programmes
 run PLC programmes
 apply PLC in various control systems.
33. CU33 Electromagnetic Waves & Anuradha De 19-06-2017 23-06-2017 1 After attending the programme, the participants will be able to
their Applications  describe the fundamentals of Electromagnetic (E.M.) theory, the basic
formalism by Maxwell & related history
 identify the sources of production of various E.M. waves, different E.M. bands’
properties
 list the applications of E.M. theory in the various fields of Physics and
Engineering
 describe the integral approach to communication theory where communication
is made with Radio / Microwaves antenna or through fiber optic wave guides.
34. CU34 Image Processing using Indrajit Saha 19-06-2017 30-06-2017 2 After attending the program, the participants will be able to
MATLAB  describe the fundamentals of image processing (IP)
 apply MATLAB commands to do IP
 explain image processing in classroom
35. CU35 Exposure on SCILAB Kinsuk Giri 19-06-2017 30-06-2017 2 After attending the program, the participants will be able to
 understand and explain the different aspects of SCILAB
 apply SCILAB to solve for mathematical, statistical and optimization problems
 use SCILAB for graphics and visualization
36. CU36 How to write Thesis or Rayapati Subbarao 26-06-2017 30-06-2017 1 At the end of the programme, the participants will be able to
Research Paper  describe the steps involved in writing a thesis.
 identify the scope of a thesis.
 construe the results in a better way.
 derive conclusions from the plots and contours made.
 discover the ways of writing a research paper.
37. CU37 PIC Microcontroller & 8086 Soumitra Kumar 26-06-2017 07-07-2017 2 After attending the programme, the participants will be able to
Microprocessor, Mandal  describe Architecture and working principles of PIC microcontroller and 8086
Architecture, Programming Micro-processor.
 describe Addressing modes & instruction sets of PIC microcontroller & 8086
& Interfacing
Micro-processors.
 write Assembly Language programmes.

18 NITTTR, Kolkata www.nitttrkol.ac.in


STTP SCHEDULE 2017 - 2018
Date

Week
Sl. Prog Programme
Programme Title Programme Objectives
No Code Co-ordinator (s) From To
38. CU38 Basic Computer Arpan Kr. Mondal 26-06-2017 07-07-2017 2 After attending the programme the participants will be able to
Applications for Faculty and  know about basic computer applications and operating systems used in
Staffs engineering education and office management.
 use the common softwares: AutoCAD, MS Word, Power Point, Excel,
specialized graph plotting software
 use various operating systems
 perform troubleshooting various OS and basic applications
*Candidates have to bring their own laptop with latest OS and MS
Office installed
39. CU39 Limit State Design of Steel Mithu Dey 03-07-2017 07-07-2017 1 After attending the program, participants are expected to be able to
Structures  appreciate the understanding principles on plastic analysis of Steel structures.
 design the different structural elements by limit state method.
 familiar with the new code IS 800 : 2007
40. CU40 Software Engineering Ranjan Dasgupta 03-07-2017 14-07-2017 2 After attending the course the participants will be able to
Fundamentals &  get exposure in various issues related to software engineering
Application Development  get exposure in application development process
 design small application
41. CU41 Modeling and Analysis of Urmila Kar 03-07-2017 14-07-2017 2 After attending this program, the participants will be able to
Electrical Circuits using  explain concepts of electrical circuits and networks
Pspice and MATLAB  explain the need for circuit analysis
 illustrate the techniques of circuit analysis
 identify the mathematical tools for circuits & network analysis
 develop models for circuit analysis using Pspice and MATLAB
 design experiments for effective illustration of Pspice and MATLAB as
teaching tool.
42. CU42 Polytechnic Chemistry Sailendra Nath Mandal 10-07-2017 14-07-2017 1 After attending the programme the participants will be able to gain and develop–
Laboratory Practices  knowledge of ‘modern principles of laboratory experimentation’ in chemistry,
chemistry and health
 skill of handling conventional and modern sophisticated equipment,
preparation of laboratory instruction sheets, interpreting experimental results,
providing laboratory instruction such as to develop in enquiring attitude among
students, preparing related test reports, related engineering chemistry,
 attitude of hands-on-working in the laboratory/field.
43. CU43 Semiconductor Devices & Anuradha De 10-07-2017 14-07-2017 1 After attending the programme, the participants will be able to
Solar PV Module  list different types of electrical materials
 explain the different properties of semiconductor like, electric & optical
 list different types of semiconductor devices
 describe the working principles of various semiconductor devices and their
applications
 describe the principles of Solar Cell
 identify the various parameters of Solar PV module
 develop an in-depth knowledge about Solar PV module by performing basic
experiments & through field visit

www.nitttrkol.ac.in NITTTR, Kolkata 19


STTP SCHEDULE 2017 - 2018
Date

Week
Sl. Prog Programme
Programme Title Programme Objectives
No Code Co-ordinator (s) From To
44. CU44 Power Generation from Sheela Yadav Rai 10-07-2017 14-07-2017 1 After attending the programme the participants will be able to
Energy Resources  understand potential sources of conventional energies for power generation
 describe potential sources of non-conventional energies for power generation
 understand environmental aspects of power generation
 appreciate about various power projects
45. CU45 Design and Analysis of Samir Roy 10-07-2017 21-07-2017 2 After successful completion of the programme the participants will be able to
Algorithms  design algorithm to solve computational problems.
 analyze algorithms for their effectiveness and efficiency.
 implement algorithms to solve real-life problems.
46. CU46 Turning, Milling and Drilling Dipankar Bose & 10-07-2017 21-07-2017 2 After attending the programme the participants will be able to
Samiran Mandal  state principles of turning, milling and drilling operations
 perform turning, milling and drilling operations in the workshop independently
47. CU47 Total Station Survey and Jagat Jyoti Mandal & 17-07-2017 21-07-2017 1 After attending the course the participants will be able to
Introduction to GPS Tushar Kanti Dey  explain basic features of a Total station
 carryout survey by using Total Station
 guide students in conducting survey by using Total station
 participants will be introduced to GPS
48. CU48 Refresher Course on Santanu Bhanja 17-07-2017 21-07-2017 1 After attending the programme, the participants will be able to
Structural Analysis and  understand the role of software in structural analysis and design
Design using STAAD. Pro  know the basic features of a universally accepted standard software,
STAAD.Pro
 develop the software simulation of the prototype structure
 analyse and design real-life civil engineering structures
Participants will be awarded a complete unlimited licenced version of
STAAD.Pro v8i & Staad.foundation Advanced v8i for personal use on their
PC’s for full one year for academic purpose
49. CU49 Engineering Rayapati Subbarao 17-07-2017 21-07-2017 1 At the end of the programme, the participants will be able to
Thermodynamics and its  explain basics of thermodynamics.
 solve thermodynamics in various problems.
Applications  explain basics of I.C. Engines and analyze the performance of gas turbines.
 explain processes of a steam power plant.
50. CU50 Exposure on Multimedia Indrajit Saha 17-07-2017 28-07-2017 2 After attending the program, the participants will be able to
Tools for Interactive  describe the multimedia components
Presentation  get exposure in various multimedia related software
 prepare a small computer based training material
51. CU51 Theory and Practices on Arpan Kr. Mondal 17-07-2017 28-07-2017 2 After attending the programme the participants will be able to
Machine Tools, CNC and  classify various welding processes and their applications.
Modern Welding Methods  explain the principles of various modern welding processes.
 perform various welding operations independently
 perform machining operation using CNC and conventional Machine Tools.

20 NITTTR, Kolkata www.nitttrkol.ac.in


STTP SCHEDULE 2017 - 2018
Date

Week
Sl. Prog Programme
Programme Title Programme Objectives
No Code Co-ordinator (s) From To
52. CU52 Disaster Management - an Tushar Kanti Dey & 24-07-2017 28-07-2017 1 After attending the programme, the participants will be able to
awareness programme for Uday Chand Kumar  define disaster.
the Polytechnic and  describe different types of disaster.
 identify the causes of disaster.
Engineering college
 describe types of safety required before disaster.
teachers  take remedial action after the disaster.
 mitigate the area of disaster.
53. CU53 Theory and Applications Kinsuk Giri 24-07-2017 28-07-2017 1 After attending the program, the participants will be able to
of Optimization with  understand various types of optimization problems
SCILAB  apply optimization techniques in different fields
 solve some basic problems using SCILAB
54. CU54 Introduction to MATLAB, Anuradha De 24-07-2017 28-07-2017 1 After attending the programme, the participants will be able to
SIMULINK & GUI  explain the different aspects of MATLAB & Simulink
 apply MATLAB for mathematical calculations, graphics and numerical analysis
by developing different types of matlab files
 develop experimental or mathematical models using different Simulink
Toolboxes
 develop simple GUI files & publish documents
55. CU55 Measurement and Design of Sagarika Pal 24-07-2017 28-07-2017 1 After completing the course the participant will be able to
Signal Conditioning Circuits  define & classify different measuring elements
 measure different types of parameters
 design & simulate signal conditioning circuit
 implement signal conditioning circuit in hardware
56. CU56 Membranes for Water Subrata Mondal 24-07-2017 28-07-2017 1 After attending this program, participants would be able to:
Treatment: Challenges and  explore the fundamental concept of membrane separations.
Opportunities  identify various types of membranes.
 familiar with wastewater treatment using environmental friendly membrane
technology.
 explain the challenges in the membrane technology for water treatment.
 explain the membrane fouling and its control for the membrane based water
treatment processes etc.
57. CU57 Fundamentals of Nirmal Kumar Mandal 31-07-2017 04-08-2017 1 After attending the programme the participants will be able to
Manufacturing System  classify manufacturing system
 describe different types of automation in manufacturing system.
58. CU58 Laboratory Practice on Mithu Dey & Uday 07-08-2017 11-08-2017 1 After attending the programme, the participants will be able to
Concrete and Chand Kumar  explain the physical significance of laboratory tests on Concrete materials.
Demonstration of NDT  demonstrate to the students on different tests of Concrete materials.
 understand the concrete mix design.

www.nitttrkol.ac.in NITTTR, Kolkata 21


STTP SCHEDULE 2017 - 2018
Date

Week
Sl. Prog Programme
Programme Title Programme Objectives
No Code Co-ordinator (s) From To
59. CU59 Electrical Safety & Code of Prasanta Sarkar 07-08-2017 11-08-2017 1 After attending the programme, the participants will be able to
Practices  understand safe working regulations for electrical installations
 familiarize with preventive maintenance of sub-station and generating stations
switchgears.
 familiarize with preventive maintenance of overhead equipment and
transmission lines.
 use code of practice for earthing installation, electrical wiring etc.
 understand extracts from Indian electricity rules 1956 & Electricity act 2003.
60. CU60 Fluid Power Dipankar Bose 07-08-2017 11-08-2017 1 After attending the programme the participants will be able to
 state principle of fluid power
 describe various elements of fluid power systems
 explain control components of fluid power systems
 illustrate applications of fluid power
61. CU61 Thermal Engineering Rayapati Subbarao 07-08-2017 11-08-2017 1 At the end of the programme, the participants will be to
Systems  explain the working principle and features of steam engines, turbines and
condensers
 solve problems in I.C. Engines and analyze the performance
 assess various processes in compressors and turbines.
62. CU62 IP Networking Rajeev Chatterjee 07-08-2017 18-08-2017 2 After going through this program the participants will be able to
 explain the concept of networking and internetworking,
 explain the working of Internet
 explain the role of RIR and other regulatory bodies
 explain the various protocols in Routing, Switching
 design campus wide network
 configure switches and routers
 explain the concept and working principles of firewall
 explain the various technologies related to Wi. Fi. networks
 explain the working of Mobile IP networks, and
 explain the concept of identity management & access management
63. CU63 Power System Protection Soumitra Kumar 14-08-2017 18-08-2017 1 After attending the programme, the participants will be able to
Mandal  describe Per unit System and Fundamentals of Power Flow
 describe Power System Stability
 find Numerical Solution of Transient Stability
 explain Power System Operation and Control
 describe Power System Protection
64. CU64 Renewable Energy Sources Sheela Yadav Rai 14-08-2017 18-08-2017 1 After attending the programme the participants will be able to:
 understand Energy Sources and their utilization
and Emerging Technologies
 explain Environmental aspects of electric energies generation
 understand the scope of Solar Thermal Conversion and Solar Photovoltaic
system
 describe about wind energy, Geothermal energy and Biomass
 apply Non-conventional energies through various agencies
viz. WBREDA

22 NITTTR, Kolkata www.nitttrkol.ac.in


STTP SCHEDULE 2017 - 2018
Date

Week
Sl. Prog Programme
Programme Title Programme Objectives
No Code Co-ordinator (s) From To
65. CU65 Teaching of Theory of Samiran Mandal 14-08-2017 18-08-2017 1 After attending the programme, the participants will be able to
Machines and Mechanism  analyse the concepts of theory of machines
 prepare the lesson plans on topics of theory of machines
 develop questions for student performance evaluation.
66. CU66 Geotechnical Investigation Jagat Jyoti Mandal 21-08-2017 25-08-2017 1 After attending the course the participants will be able to
and Testing (inclusive of  explain basic concepts on laboratory tests of soil as per requirement of Civil
various lab and field tests engineering Diploma curriculum
 guide students in conducting different laboratory experiments related to
on soil) – Module I
determination of related parameters
 demonstrate different tests on soil for determination of strength and
compressibility parameter of soil
67. CU67 Formal Languages and Samir Roy 21-08-2017 25-08-2017 1 After completing the course the participant will be able to
Automata  apply Formal languages and Automata in computation.
 implement Formal languages and Automata in software
 explain Formal Languages and Automata in classroom
68. CU68 Fibre Optic Communication Anuradha De 21-08-2017 25-08-2017 1 After attending the programme, participants are expected to be able to
 identify the characteristics of optical fibre, types, advantages, disadvantages
and various applications of optical fibre
 state the technologies used in optical communication with optical fibre
 distinguish various multiplexing technology, different types of networking,
different layers of networking system in Tele-communication
 develop an in-depth knowledge by performing various experiments & through
field visits
69. CU69 Functional Textiles and Subrata Mondal 21-08-2017 25-08-2017 1 After attending this program, participants would be able to
Protections  explain the concept of functional textiles.
 explain the concept of heat and moisture management in the clothing
 explore the UV blocking textiles.
 describe the nanotechnology applications for the functional textiles.
 explore the medical textile etc.
70. CU70 Application of MATLAB Urmila Kar & Sagarika 21-08-2017 01-09-2017 2 After attending the programme, participants will be able to:
Control System, Image Pal  demonstrate application of MATLAB programming, SIMULINK, Control System
Processing and Fuzzy Logic and Image Processing Toolbox with example.
 analyze control systems using Control System Toolbox Commands.
Tool Box
 solve engineering problems using SIMULINK Modeling.
 apply Image Processing Toolbox.
71. CU71 Instrumental Techniques of Sailendra Nath Mandal 28-08-2017 08-09-2017 2 After attending the programme the participants will be able to acquire –
Air and Water quality  knowledge of different measuring device of air and water quality, different
Analysis parameters and impact on human health,
 skill of handling different device, performing experiments, interpreting results,
preparing test report, providing laboratory instructions to develop inquiring
attitude among the student and evaluation of laboratory performance in
related to water and petrochemical testing laboratory,
 attitude of hand-on working in the laboratory/field

www.nitttrkol.ac.in NITTTR, Kolkata 23


STTP SCHEDULE 2017 - 2018
Date

Week
Sl. Prog Programme
Programme Title Programme Objectives
No Code Co-ordinator (s) From To
72. CU72 Experiments with / without Anuradha De 04-09-2017 08-09-2017 1 After attending the programme, the participants will be able to
Computer Interfacing Kit  use EXPeyes, an interfacing kit for Computer based experiments
for Young Engineers and  perform some experiments of Basic Physics / Electronics with computer
interfacing kit
Scientists
 write simple programme using Python software and perform experiments
 perform some Applied Physics experiments & develop instructional manual
73. CU73 Developments in Power Rayapati Subbarao 04-09-2017 08-09-2017 1 At the end of the programme, the participants will be able to
Plants and Alternative Fuels  explain the importance of alternative fuels in power section
 explain necessity of newer fuels in transportation
 describe alternative sources of energy
 explore possibilities in making modifications to power plant scenario
 various alternative fuels available
74. CU74 Theory and Practices on Arpan Kr. Mondal 04-09-2017 15-09-2017 2 After attending the programme the participants will be able to
Various Welding Processes,  classify various welding processes and their applications.
Machine Tools and CNC  understand the principles of various welding processes, Machine Tools & CNC
 perform independently various welding processes
 operation in CNC & Machine Tools.
75. CU75 Geotechnical Investigation Jagat Jyoti Mandal 11-09-2017 15-09-2017 1 After attending the course the participants will be able to
and Testing (inclusive of  explain basic concepts on field tests of soil as per requirement of Civil
various lab and field tests engineering Diploma curriculum
 guide students in carryout field tests related to determination of related
on soil) – Module II
parameters
 set up soil exploration programme and prepare soil test report
76. CU76 Laboratory Practice on Civil Mithu Dey & Uday 11-09-2017 15-09-2017 1 After attending the programme, the participants will be able to
Engineering Materials Chand Kumar  develop Skill & Knowledge on the fundamentals involved in testing of various
(Bricks, Aggregates, ingredients of Civil Engineering Materials.
 familiar with the use of NDT equipments.
Cement & Concrete)
77. CU77 Numerical and Statistical Kinsuk Giri 11-09-2017 15-09-2017 1 After attending the program, the participants will be able to
Methods for Technical  get an overview on different numerical and statistical methods
Teachers with SCILAB  get an overview on Monte Carlo methods with hands-on
 solve problems on numerical and statistical using SCILAB
78. CU78 Computer Aided Design Nirmal Kumar Mandal 11-09-2017 15-09-2017 1 After attending the programme the participants will be able to
with Ansys  explain a mechanical system.
 use of software packages to analyse mechanical system.
79. CU79 Control Systems Analysis & Prasanta Sarkar 11-09-2017 22-09-2017 2 After attending the programme, the participants will be able to
Design using MATLAB  model physical systems
 analyze in time & frequency domain
 determine input – output stability
 design controller
 apply MATLAB Control System Toolbox

24 NITTTR, Kolkata www.nitttrkol.ac.in


STTP SCHEDULE 2017 - 2018
Date

Week
Sl. Prog Programme
Programme Title Programme Objectives
No Code Co-ordinator (s) From To
80. CU80 Modernization of Chemistry Sailendra Nath Mandal 18-09-2017 22-09-2017 1 After attending the programme the participants will be able to gain and develop–
and Environmental Pollution  knowledge of different equipment, reagents, accessories, furniture, glassware,
Testing Laboratory plastic wares etc. for chemistry and environmental pollution testing
laboratory,
 skill of handling conventional and modern sophisticated equipment,
preparation of laboratory instruction sheets, interpreting experimental results,
providing laboratory instruction such as to develop in enquiring attitude among
students, preparing related test reports, related engineering chemistry
/environmental,
 attitude of hands-on-working in the laboratory/field.
81. CU81 Advanced Course on Santanu Bhanja 18-09-2017 22-09-2017 1 After attending the programme, the participants will be able to
Structural Analysis and  understand the advanced features of the software
Design Software –  application of new Codal clauses as per revised Indian Standards
 analyse and design real-life civil engineering structures as per relevant recently
STAAD.Pro
revised Indian Standards
Participants will be awarded a complete unlimited licenced version of
STAAD.Pro v8i & Staad.foundation Advanced v8i for personal use on their
PC’s for full one year for academic purpose
82. CU82 MATLAB for Data Analytics Indrajit Saha 18-09-2017 22-09-2017 1 After attending the program, the participants will be able to
 analyze the data using various statistical methods
 visualize the data for better understanding
 develop prediction model for real-life data driven problems
83. CU83 Physics of Materials Anuradha De 18-09-2017 22-09-2017 1 After attending the programme, the participants will be able to
 list different types of materials with their basic properties
 analyze the fundamentals of crystal structure, deformations and various
related applications
 identify the different properties of materials like, electric, magnetic, & optical
properties
 state the functions of various devices based on the different properties of
materials
 record relevant information related to various experiments through field visit.
84. CU84 Introduction to ETABS Santanu Bhanja 09-10-2017 13-10-2017 1 After attending the programme, the participants will be able to
 be acquainted with the basic methodology of software application in structural
Structural Analysis and
analysis and design
Design Software for  acquire the fundamentals of analysis and design of RC buildings
Buildings  know the basic features of a universally accepted standard software like
ETABS
 identify the important clauses of the relevant Indian Standards like IS:456-
2000, IS:1893 Part I-2016, IS:13920-2016, IS875 Part III-2015

www.nitttrkol.ac.in NITTTR, Kolkata 25


STTP SCHEDULE 2017 - 2018
Date

Week
Sl. Prog Programme
Programme Title Programme Objectives
No Code Co-ordinator (s) From To
85. CU85 Advance Programming in C Rajeev Chatterjee 09-10-2017 13-10-2017 1 After going through this program the participants will be able to
 demonstrate the various operation on single and multi –dimensional arrays
and structures,
 demonstrate programs related to functions and pointers, and
 demonstrate programing skills on dynamic allocation of memory using linked
list.
86. CU86 PLC and its Applications Soumitra Kumar 09-10-2017 13-10-2017 1 After attending the course the participants will be able to
Mandal  familiar with the architecture of PLC system.
 understand the working principle of PLC
 describe and develop interfacing of input output devices with PLC
 write and run PLC programme on a PLC system
87. CU87 PLC Architecture, Subrata Chattopadhyay 09-10-2017 13-10-2017 1 After attending the course the participants will be able to
Programming and its  familiar with the architecture of PLC system.
applications in  understand the working principle of PLC
 describe and develop interfacing of input output devices with PLC
Measurement & Control
 write and run PLC programme on a PLC system
 implement the PLC in Measurement & Control System and its trouble shooting
apply PLC in DCS.
88. CU88 Testing & Characterisation Jagat Jyoti Mandal & 09-10-2017 20-10-2017 2 After attending the course the participants will be able to
of building materials Tushar Kanti Dey  explain basic concepts on laboratory tests of various building material
[bricks, water, cement,  guide students in conducting different laboratory experiments related to
building construction for determination of various parameters
aggregates, steel &
 demonstrate different tests on building materials
concrete ]
89. CU89 Fundamentals of Limit State Santanu Bhanja 23-10-2017 27-10-2017 1 After attending the programme, the participants will be able to
Method of Design of RC  know the history and evolution of reinforced concrete design
Structures with Special  identify the principles underlying the limit state method of reinforced concrete
design
Emphasis on Load and
 understand the fundamental aspects for design under flexure, shear and
Capacity design compression with reference to earthquake resistant design
 design and detail structural elements from the consideration of ductility
 understand load and capacity design
 be familiar to different computer software for design of RC structural elements
90. CU90 Semiconductor Devices & Anuradha De 23-10-2017 27-10-2017 1 After attending the programme, the participants will be able to
Solar PV Module  list different types of electrical materials
 explain the different properties of semiconductor like, electric & optical
 list different types of semiconductor devices
 describe the working principles of various semiconductor devices and their
applications
 describe the principles of Solar Cell
 identify the various parameters of Solar PV module
 develop an in-depth knowledge about Solar PV module by performing basic
experiments & through field visit

26 NITTTR, Kolkata www.nitttrkol.ac.in


STTP SCHEDULE 2017 - 2018
Date

Week
Sl. Prog Programme
Programme Title Programme Objectives
No Code Co-ordinator (s) From To
91. CU91 Experimentation and Nirmal Kumar Mandal 23-10-2017 27-10-2017 1 After attending the programme the participants will be able to
Experimental Data Analysis  explain Design of Experiment
 develop Response surface
 explain Analysis of Variance
92. CU92 Solid Waste and Sailendra Nath Mandal 23-10-2017 03-11-2017 2 After attending the programme the participants will be able to acquire –
Wastewater Treatment  knowledge of basic concept of solid waste, wastewater, sampling,
preservation, analysis, interpretation of result and wastewater treatment, Solid
waste management, impact on human health ,
 skill of handling equipment, performing experiments, interpreting results,
preparing test report, providing laboratory instructions to develop inquiring
attitude among the student and evaluation of laboratory performance in
related to solid waste, wastewater analysis/ treatment laboratory,
 attitude of hand-on working in the laboratory/field
93. CU93 Mathematics and Samir Roy & Kinsuk 23-10-2017 03-11-2017 2 After attending the program, the participants will be able to
Computations Giri  explain mathematical/logical foundation of computations
 model computational tasks in terms of mathematical formalism
 apply appropriate mathematical tools to solve computational problem
94. CU94 Development of Laboratory Samiran Mandal 30-10-2017 03-11-2017 1 After attending the programme, the participants will be able to
Instruction Sheet for  specify measuring improvements for different jobs
Metrology  use the improvements for different measurement jobs
 plain measurement using different improvements
 develop instruction sheets for different experiments in metrology laboratory.
95. CU95 Optical Fibre & Laser: Anuradha De 06-11-2017 10-11-2017 1 After attending the programme, the participants will be able to
Principles & Applications  identify the characteristics of optical fibre,, advantages, disadvantages
 explain the basic principle of Laser, Properties, Types, characteristics and
related hazards
 list the various applications of laser with / without optical fibre
 state the technologies used in optical communication with optical fibre
 develop an in-depth knowledge about optical fibre & laser by performing
various experiments & through field visit
96. CU96 Industrial automation using Sagarika Pal 06-11-2017 10-11-2017 1 After completing the course the participant will be able to
PLC, DCS & SCADA  explain Conventional control techniques for industrial automation
 describe complex controls such as ratio, cascade, feed forward etc.
 develop programme on PLC and DCS for process automation
 explain SCADA systems for various process control systems
97. CU97 Estimating & Costing of Sheela Yadav Rai 06-11-2017 10-11-2017 1 After attending the programme the participants will be able to :
Non-Conventional Energies  describe various type of Non-conventional Energies Sources
 understand the scope of Solar energy, Solar Thermal Conversion, Solar
Collector, Wind Energy
 estimating & costing of various energies

www.nitttrkol.ac.in NITTTR, Kolkata 27


STTP SCHEDULE 2017 - 2018
Date

Week
Sl. Prog Programme
Programme Title Programme Objectives
No Code Co-ordinator (s) From To
98. CU98 Hydraulic Machines Dipankar Bose 06-11-2017 10-11-2017 1 After attending the programme, the participants will be able to:
 classify various hydraulic machines
 state working principles of various hydraulic machines
 solve various numerical on hydraulic machines
99. CU99 CAD/CAM Nirmal Kumar Mandal 06-11-2017 10-11-2017 1 After attending the programme the participants will be able to
 define automation.
 classify automation.
 operate automated system.
100. CU100 Thermal Sciences Lab Rayapati Subbarao 06-11-2017 10-11-2017 1 At the end of the programme, the participants will be able to
 understand the basics of thermodynamics.
 apply laws of thermodynamics in various problems.
 experiment engines with respect to performance.
 exposure to various thermal systems.
 prepare lab handouts for various experiments in thermal lab.
101. CU101 Object Oriented Software Samir Roy 13-11-2017 17-11-2017 1 After successful completion of the programme the participants will be able to
Design  explain OOSD methodology in Classroom.
 create of model of a software using unified modeling language.
 design software using Object Oriented paradigm.
102. CU102 Introduction to MATLAB, Anuradha De 13-11-2017 17-11-2017 1 After attending the programme, the participants will be able to
SIMULINK & GUI  explain the different aspects of MATLAB & Simulink
 apply MATLAB for mathematical calculations, graphics and numerical analysis
by developing different types of matlab files
 develop experimental or mathematical models using different Simulink
Toolboxes
 develop simple GUI files & publish documents
103. CU103 Laboratory Experiment on Prasanta Sarkar 13-11-2017 17-11-2017 1 After attending the programme, the participants will be able to
Electrical Machine and  familiar with the electrical machine and power system equipment’s.
Power System  perform experiment on electrical machine and power system
 determine the characteristic of electrical machine and power system.
104. CU104 Design of Payroll Systems Ranjan Dasgupta 20-11-2017 01-12-2017 2 After attending the course the participants will be able to
using ORACLE  get exposure in various process of Payroll Systems
 get exposure in designing the processes using Software Engineering
approach
 design & develop the system

28 NITTTR, Kolkata www.nitttrkol.ac.in


STTP SCHEDULE 2017 - 2018
Date

Week
Sl. Prog Programme
Programme Title Programme Objectives
No Code Co-ordinator (s) From To
105. CU105 Application of MATLAB in Urmila Kar 20-11-2017 01-12-2017 2 After attending this programme, the participants will be able to
Modeling and Analysis of  explain fundamentals of linear and nonlinear control systems
Control Systems  explain the need for control system analysis
 develop mathematical representation of control systems
 identify approaches for control system analysis
 select techniques for analysing stability of control systems
 simulate models for analysis of linear and nonlinear control systems using
MATLAB programming / SIMULINK
 use MATLAB control system tool box for designing experiments on control
system
106. CU106 Application of MATLAB in Prasanta Sarkar 04-12-2017 08-12-2017 1 After attending the programme, the participants will be able to
Engineering  explain the different aspect of matlab & simulink
 solve simple problem using matlab programming
 develop simple model using simulink
 use matlab in analysis, design and simulation of engineering problem
107. CU107 Operation and maintenance Sailendra Nath Mandal 04-12-2017 15-12-2017 2 After attending the programme the participants will be able to acquire –
of different Water, Air and  knowledge of operation and maintenance of different water, air and
Petrochemical Testing petrochemical testing equipment, different parameter and impact on human
health,
Equipment
 skill of handling different kit, performing experiments, interpreting results,
preparing test report, providing laboratory instructions to develop inquiring
attitude among the student and evaluation of laboratory performance in
related to water, air and petrochemical testing laboratory,
 attitude of hand-on working in the laboratory/field
108. CU108 Introduction to IS 800-2007 Mithu Dey 11-12-2017 15-12-2017 1 After attending the program, participants are expected to be able to
 appreciate the understanding principles on plastic analysis of Steel structures.
 design the different structural elements as per new codes:
 familiar with the new code IS 800 : 2007
109. CU109 Preparation of Laboratory Sagarika Pal 11-12-2017 15-12-2017 1 After completing the course the participant will be able to
Manual for Electrical,  choose experiments from the detailed curriculum
Electronics and  perform the experiments
 record and analyze the experimental data
Instrumentation
 write the instruction manual for students
Engineering  evaluate the laboratory performance of students
110. CU110 Advanced Welding Arpan Kr. Mondal 11-12-2017 22-12-2017 2 After attending the programme the participants will be able to
Processes, NDT, CNC and  define different terms and concepts of the modern welding
Mechanical Testing  explain different principles of Modern Welding methods
 principles and practice on various mechanical testing
 practice on NDT and CNC
 know the recent developments in the field of welding.

www.nitttrkol.ac.in NITTTR, Kolkata 29


STTP SCHEDULE 2017 - 2018
Date

Week
Sl. Prog Programme
Programme Title Programme Objectives
No Code Co-ordinator (s) From To
111. CU111 Surveying by Total Station Santanu Bhanja 18-12-2017 22-12-2017 1 After attending the programme, the participants will be able to
with an introduction to  de introduced to Total Station
Digital Geographical  understand the processes involved in operating Total Station
 carry out traversing using Total Station
Positioning System
 carry out stake out, REM Resection etc., with Total Station
 assimilate and store data from site and plot
 de introduced to DGPS
112. CU112 Active Network Prasanta Sarkar 18-12-2017 22-12-2017 1 After attending the programme, the participants will be able to
 familiarize with active electrical network.
 distinguish active network from passive network
 solve active network problem
 analysis and design active network circuit
113. CU113 Renewable Energy Sources Sheela Yadav Rai 18-12-2017 22-12-2017 1 After attending the programme the participants will be able to
and Emerging Technologies  understand energy sources and their utilization
 explain environmental aspects of electric energies generation
 understand the scope of solar thermal conversion and solar photovoltaic
system
 describe about wind energy, geothermal energy and biomass
 apply Non-conventional energies through various agencies viz. WBREDA
114. CU114 Laboratory & Workshop Soumitra Kumar 18-12-2017 22-12-2017 1 After completing the course the participant will be able to
Manual for Electrical, Mandal  choose experiments from the detailed curriculum
Electronic and  perform the experiments
 record and analyze the experimental data
Instrumentation
 write the instruction manual for students
Engineering  evaluate the laboratory performance of students
115. CU115 Laboratory Manual Dipankar Bose 18-12-2017 22-12-2017 1 After attending the programme the participants will be able to
Preparation (Mechanical  classify various skills involved in laboratory practices
Engineering)  know various categories of laboratory experiments
 write laboratory instruction sheets by conducting hands on practices on
mechanical engineering
 know evaluation technique
116. CU116 Research Methodology in Kinsuk Giri & Indrajit 18-12-2017 29-12-2017 2 After attending the program, the participants will be able to
Engineering and Technical Saha  get exposure in Research Methodology
Writing using LaTeX  describe the fundamentals LaTeX programming
 apply LaTeX commands for preparing scientific and non-scientific documents
117. CU117 Computations and Nirmal Kumar Mandal 18-12-2017 29-12-2017 2 After attending the programme the participants will be able to
Optimization in Engineering  model a physical system
with MATLAB  explain linear and nonlinear regression
 optimise a function

30 NITTTR, Kolkata www.nitttrkol.ac.in


STTP SCHEDULE 2017 - 2018
Date

Week
Sl. Prog Programme
Programme Title Programme Objectives
No Code Co-ordinator (s) From To
118. CU118 Application of Soft tools in Jagat Jyoti Mandal & 01-01-2018 12-01-2018 2 After attending the course the participants will be able to
Engineering Tushar Kanti Dey  explain features of standard soft tools in Engineering
 explain the concepts of the tools
 apply these concepts to solve practical problems
 impart acquired knowledge to students in a systematic manner
119. CU119 Fundamentals and Subrata Mondal 01-01-2018 12-01-2018 2 After attending this program, participants would be able to
Applications of  explore the concept of nanotechnology.
Nanomaterials  describe the fundamental of nanoscale materials’ properties.
 identify various carbon based nanomaterials.
 describe the applications of nanomaterials in various fields
 familiar with the nano toxicology and nano safety etc.
120. CU120 Repair and Rehabilitation of Santanu Bhanja & 08-01-2018 12-01-2018 1 After attending the programme, the participants will be exposed to
Structures Uday Chand Kumar  the causes for deterioration and of structures
 importance of non-destructive and semi-destructive testing
 repair, rehabilitation and retrofitting measures
 hands-on demonstration of various Instruments
121. CU121 LABVIEW & MATLAB Sagarika Pal 08-01-2018 12-01-2018 1 After completing the course the participant will be able to
Applications in Engineering  understand fundamentals of labview
 implement labview applications in engineering
 illustrate applications of MATLAB in Engineering
122. CU122 Machines and Drives Soumitra Kumar 08-01-2018 12-01-2018 1 After attending the programme, the participants will be able to
Mandal  perform maintenance of transformers, DC motors, Induction Motors,
synchronous generators and electrical appliances
 learn different drives for AC & DC Machine
123. CU123 Non Traditional Machining Dipankar Bose 08-01-2801 12-01-2018 1 After attending the programme the participants will be able to
processes  explain the utility of non-traditional machining processes
 state working principles of different non-traditional machining processes.
124. CU124 Introduction to DBMS Ranjan Dasgupta 08-01-2018 19-01-2018 2 After attending the course the participants will be able to
 get acquainted with Database Management System
 get exposure in database design theory
 design and develop database application
125. CU125 Drafting and Research Arpan Kr. Mondal 08-01-2018 19-01-2018 2 After attending the programme the participants will be able to
Tools for Engineer and  use research and drafting tools used in engineering and scientific research.
Scientists  use AutoCAD, MS Word, Power Point, Excel, specialized graph plotting
software and other research tools.
*Candidates have to bring their own laptop with latest OS and MS Office
installed
126. CU126 Modelling of Engineering Nirmal Kumar Mandal 08-01-2018 19-01-2018 2 After attending the programme the participants will be able to
Systems  model a system
 analyse the system

www.nitttrkol.ac.in NITTTR, Kolkata 31


STTP SCHEDULE 2017 - 2018
Date

Week
Sl. Prog Programme
Programme Title Programme Objectives
No Code Co-ordinator (s) From To
127. CU127 Power System Protection Sheela Yadav Rai 15-01-2018 19-01-2018 1 After attending the programme the participants will be able to
 describe the structure of power system
 understand power system protective relays
 know protection of alternators & transformers
 understand the various types of protection system of bus-bars & lines
128. CU128 Introduction to Samir Roy & Indrajit 22-01-2018 02--022018 2 After attending the program, the participants will be able to
Computational Intelligence Saha  describe the fundamentals of Computational Intelligence (CI)
 apply CI for complex computational problem
 explain computational intelligence in classroom
129. CU129 Mechanical Measurement Samiran Mandal 29-01-2018 02-02-2018 1 After attending the programme, the participants will be able to
and Control  explain the principles of Measurement of physical quantities
 explain the basic principles of control system
130. CU130 Discrete Mathematics and Kinsuk Giri 05-02-2018 09-02-2018 1 After attending the program, the participants will be able to
Its Applications  understand the fundamentals of discrete mathematics
 solve problems in various areas of discrete mathematics
 apply SCILAB to solve few discrete math problems
131. CU131 Thesis Writing Rayapati Subbarao 05-02-2018 09-02-2018 1 At the end of the programme, the participants will be to:
 identify the structure and scope of the thesis.
 interpret research results in a better way.
 Identify the tools available for making plots.
132. CU132 Refresher Course in Jagat Jyoti Mandal & 05-02-2018 16-02-2018 2 After attending the course the participants will be able to
Engineering Mechanics & Tushar Kanti Dey  explain basic concepts of Engineering Mechanics & Strength of Material
Strength of Material  apply these concepts to solve simple engineering problems
 teach the related topics in more efficient manner
133. CU133 Application of Auto CAD in Mithu Dey & Uday 12-02-2018 16-02-2018 1 After attending the programme, the participants will be able to
Engineering and basic Chand Kumar  know the different commands of the software
Sciences  draw 2D and 3D
 appreciate the use of AutoCAD in Engg. & Sc. field
134. CU134 Power Generation from Sheela Yadav Rai 12-02-2018 16-02-2018 1 After attending the programme the participants will be able to
Energy Resources  understand potential sources of conventional energies for power generation
 describe potential sources of non-conventional energies for power generation
 understand environmental aspects of power generation
 appreciate about various power projects
135. CU135 Skill Development in Dipankar Bose 12-02-2018 16-02-2018 1 After attending the programme the participants will be able to
Workshop  classify various skills involved in workshop practices
 prepare instruction sheets by conducting hands on practices on workshop jobs
 know evaluation techniques
136. CU136 Design and Development of Ranjan Dasgupta & 12-02-2018 23-02-2018 2 After attending the course the participants will be able to
MOOC based e-content Samir Roy  get exposure in MOOC / SWAYAM platform
 get exposure in different equipment related to e-content develop
 get exposure in design and develop of e-content.

32 NITTTR, Kolkata www.nitttrkol.ac.in


STTP SCHEDULE 2017 - 2018
Date

Week
Sl. Prog Programme
Programme Title Programme Objectives
No Code Co-ordinator (s) From To
137. CU137 Power System Analysis Sheela Yadav Rai 26-02-2018 02-03-2018 1 After attending the programme the participants will be able to
 describe the structure of power system
 understand the parameters of transmission line
 represent power system components
 know symmetrical & unsymmetrical faults
138. CU138 Applied Thermodynamics Rayapati Subbarao 05-03-2018 09-03-2018 1 At the end of the programme, the participants will be able to
(Thermal Engineering – II)  interpret the working principle and features of steam engines, turbines and
condensers.
 explain the basics of I.C. Engines and analyze the performance.
 identify the functions of gas turbines and power plants.
139. CU139 Teaching – Learning of Samir Roy & Rajeev 19-03-2018 23-03-2018 1 After attending the course the participants will be able to
Computer Science in Indian Chatterjee  set instructional objectives in CSE area in India
Context  plan effective teaching of Computer Science in India
 deliver content in the area of CSE in India
 evaluate/Assess achievement of learning objectives in CSE in India
140. CU140 Automobile Engineering Samiran Mandal 19-03-2018 23-03-2018 1 After attending the course the participants will be able to
 classify the Automobiles
 describe the construction of Automobiles
 explain the principle of working of different subsystems of Automobiles.
141. CU141 Drawing, Analysis and Mithu Dey 26-03-2018 30-03-2017 1 After attending the program, participants are expected to be able to
Design of structures by  appreciate the importance of the Limit State Method.
Limit State Method using  compare with Working Stress Method.
 understand the different methods of structural analysis
Software
 design the different structural elements (RCC & Steels structures) by Limit
State Method.
 use of software to drawing analysis and design the different Structural
elements.
142. CU142 Topics on Computer Ranjan Dasgupta 26-03-2018 30-03-2018 1 After attending the course the participants will be able to
Architecture & Organization  get exposure in different hardware components of modern computer
(Theoretical Discussion)  get exposure in the limitation of modern computer in context of high
performance
 get exposure in HPC and Cloud Computing

www.nitttrkol.ac.in NITTTR, Kolkata 33


STTP SCHEDULE 2017 - 2018
II. MANAGEMENT (MGT)

Date

Week
Sl. Prog Programme
Programme Title Programme Objectives
No Code Co-ordinator (s) From To
143. MGT01 Strategic Management Sukanta Kumar Naskar 01-05-2017 05-05-2017 1 After attending the programme, participants will be able to
Issues in Technical  appreciate the importance of Strategic Management concept in technical
Education System education system
 define strategic planning process
 identify components of strategic planning process
 develop action plan under strategic planning process in respective field
144. MGT02 Research Methodology in Habiba Hussain & 03-07-2017 07-07-2017 1 After attending the programme the participants will be able to
Technical Education Samiran Mandal  identify the components of research
 develop research proposal
 analyze research data
 develop research report
145. MGT03 Laboratory Safety Subrata Mondal 03-07-2017 14-07-2017 2 After attending this program, participants would be able to
Management  demonstrate the proper housekeeping in the laboratory area.
 explore various personal protective equipment for the laboratory works.
 evaluate the risk assessment for the hazardous laboratory works.
 identify the emergency equipment for the laboratory work area.
 the hazardous waste for the laboratory.
146. MGT04 Basic Managerial Skills for Habiba Hussain 17-07-2017 28-07-2017 2 After attending the programme the participants will be able to
Teachers  identify essential managerial skills needed by a teacher
 analyse classroom dynamics
 practise cooperating learning
 apply strategies for effective classroom management
147. MGT05 Institutional Management Sukanta Kumar Naskar 11-09-2017 15-09-2017 1 After attending the programme, participants will be able to
 identify components of institutional management
 apply the components of Institutional management in respective field
 monitor progress of Institutional management components for institutional
development
148. MGT06 Research Methodology in Sukanta Kumar Naskar 23-10-2017 27-10-2017 1 After attending the programme, participants will be able to
Management  identify to identify components of Research
 explain the need of research methodology in management
 identify data analysis methods for research methodology
 develop research proposal
 be acquainted how to write research report
149. MGT07 Occupational Health and Tushar Kanti Dey & 20-11-2017 24.11.2017 1 After attending the programme, the participants will be able to
Safety Issues - an Uday Chand Kumar  identify occupation related issues in various activities.
Awareness programme for  develop a comprehensive action plan for safety management.
the Polytechnic and
Engineering College
Teachers

34 NITTTR, Kolkata www.nitttrkol.ac.in


STTP SCHEDULE 2017 - 2018
III. PROFESSIONAL SKILL DEVELOPMENT (PS)

Date

Week
Sl. Prog Programme
Programme Title Programme Objectives
No Code Co-ordinator (s) From To
150. PS01 Induction Training - Phase Habiba Hussain 24-04-2017 05-05-2017 2 After attending the programme the participants will be able to
I  analyse the components of LT system
 identify principles of designing curriculum
 explore motivational techniques
 demonstrate effective communication
 correlate teaching and assessment
151. PS02 Management of CDTP and Tushar Kanti Dey & 22-05-2017 26-05-2017 1 After attending the course the participants will be able to
PWD Scheme Uday Chand Kumar  understand the activities of the scheme.
 aware the role of polytechnic in implementing the scheme.
 prepare UC, SOA & PAR.
 prepare action plan of the scheme.
 involve PRI / NGO in implementing the scheme.
152. PS03 Development and Sekhar Chakraborty 22-05-2017 26-05-2017 1 The Training will enable the participants will be able to
Implementation of Staff  identify the importance of training activity in the context of HRD in the
training Programme for changing scenario.
 conduct needs assessment among fellow colleagues
Polytechnic Teachers
 enlist various role dimensions of a trainer.
 chose training methods in accordance with the need & present context
 develop step-by-step approach towards planning and implementing a training
program.
 evaluate the effectiveness of a training program.by applying standard tool
153. PS04 Refresher Course on Urmila Kar 22-05-2017 09-06-2017 3 After attending the programme, participants will be able to
Curriculum Design  illustrate the process of curriculum development in TVET
approaches in Technical  explain need-based curriculum development process
 identify innovative approaches in curriculum design
and Vocational Education
 illustrate the procedure for developing credit based flexible curriculum for
and Training (TVET) technical programme
 illustrate the process for Competency Based Curriculum (CBC) development
 design a CBC for need based training
 identify features of Outcome Based Education (OBE)
 illustrate the procedure for developing Outcome Based Curriculum (OBC)
 develop content of a specific course for OBC
 identify strategies and issues related to implementation of OBC
 design effective learning-teaching process for OBC

www.nitttrkol.ac.in NITTTR, Kolkata 35


STTP SCHEDULE 2017 - 2018
Date

Week
Sl. Prog Programme
Programme Title Programme Objectives
No Code Co-ordinator (s) From To
154. PS05 Developing Sekhar Chakraborty 12-06-2017 16-06-2017 1 The Training will enable the participant to
Entrepreneurship Among  identify the importance of entrepreneurship development
Students-Role of  inculcate basic entrepreneurial characteristics among the students
 differentiate between various types of enterprise
Polytechnic Teachers
 describe what is entrepreneurial
 analyse various stages of entrepreneurial development
 help students draw up business proposals
155. PS06 Problem Solving and Sukanta Kumar Naskar 19-06-2017 23-06-2017 1 After attending the programme, participants will be able to
Decision Making  define problem
 identify phases of problem solving
 analyze different stages of problem solving
 apply different tools for problem solving & decision making
156. PS07 Essentials of Human Sukanta Kumar Naskar 10-07-2017 14-07-2017 1 After attending the programme, participants will be able to
Resource Management  be acquainted with scope & functions of HRM
 appreciate the applications of HRM in respective field
 identify roles & functions of HR manager in respective field
157. PS08 Design and Implementation Urmila Kar 31-07-2017 11-08-2017 2 After attending the programme, participants will be able to
of Outcome Based  explain the need for Outcome Based Education (OBE)
Curriculum  identify features of OBE
 develop Educational objectives and Outcomes of specific programme
 decide courses under a specific programme
 develop content of specific course
 design scheme of study and assessment
 identify strategies and issues related to Outcome Based Curriculum (OBC)
implementation
 identify parameters for designing effective learning-teaching process of OBC
158. PS09 Student Mentorship Habiba Hussain 07-08-2017 11-08-2017 1 After attending the programme the participants will be able to
 explain role of a teacher as mentor
 analyse mentoring skills
 identify mentoring styles
159. PS10 Effective Training Sukanta Kumar Naskar 21-08-2017 25-08-2017 1 After attending the programme, participants will be able to
 identify different stages of a Training programme
 design a training programme
 evaluate a training programme
160. PS11 Quality Improvement in Sekhar Chakraborty 04-09-2017 15-09-2017 2 The Training will enable the participant to
Institutional activities  identify the quality parameters in institutional activities
 explain principles underlying QMS
 explain fundamentals of TQM
 use basic management tools for day to day problem solving
 develop a strategic plan for quality improvement in polytechnic

36 NITTTR, Kolkata www.nitttrkol.ac.in


STTP SCHEDULE 2017 - 2018
Date

Week
Sl. Prog Programme
Programme Title Programme Objectives
No Code Co-ordinator (s) From To
161. PS12 Leadership & Team Building Habiba Hussain 11-09-2017 15-09-2017 1 After attending the programme the participants will be able to
in Academia  analyse the leadership attributes of teachers
 identify teacher's role as a leader in the classroom
 develop learning team in the classroom
162. PS13 Designing Student Centered Habiba Hussain 09-10-2017 13-10-2017 1 After attending the programme the participants will be able to
Instruction  identify attributes of student centred instruction (SCI)
 design instruction
 plan student centred activities
 demonstrate SCI
163. PS14 Outcome Based Habiba Hussain 06-11-2017 10-11-2017 1 After attending the programme the participants will be able to
Assessment  explore basic principles of assessment
 distinguish between traditional & outcome based assessment
 review existing criteria of assessment
 design tool for measuring learning outcome
164. PS15 Making Effective Sekhar Chakraborty 13-11-2017 17-11-2017 1 The Training will enable the participant to
Presentations [practice  make presentations effectively in any kind of situation
based training]
165. PS16 Effective Teaching Habiba Hussain 11-12-2017 15-12-2017 1 After attending the programme the participants will be able to
 analyse the components of effective teaching
 plan instruction
 apply appropriate instructional strategy
 monitor students’ learning
166. PS17 Outcome Based Education Habiba Hussain 15-01-2018 19-01-2018 1 After attending the programme the participants will be able to
& Accreditation  identify features of Outcome Based Education (OBE)
 relate OBE & accreditation
 describe the steps for developing Outcome Based Curriculum(OBC)
 design instruction for attainment of learning outcome
 identify relevant assessment tools
167. PS18 Microteaching for Habiba Hussain 29-01-2018 02-02-2018 1 After attending the programme, participants will be able to
improving Teaching Skills  analyse teaching
 identify teaching skills essential in higher education
 practice few skills under controlled conditions
 integrate teaching skills in classroom instruction
168. PS19 Design of Question Bank for Urmila Kar 05-02-2018 16-02-2018 2 After attending this programme, the participants will be able to
effective implementation of  explain the need for question bank
Technical Curriculum  identify Course Outcomes
 write Intended Learning Outcomes
 prepare specification table
 identify types of test
 construct test items
 analyze test items
 evaluate test items

www.nitttrkol.ac.in NITTTR, Kolkata 37


STTP SCHEDULE 2017 - 2018
Date

Week
Sl. Prog Programme
Programme Title Programme Objectives
No Code Co-ordinator (s) From To
169. PS20 Induction Training – Phase Habiba Hussain (26-02-2018 09/03/2018) 2 After attending the programme the participants will be able to
II  analyse the components of LT system
 identify principles of designing curriculum
 explore motivational techniques
 demonstrate effective communication
 correlate teaching and assessment
170. PS21 Panchayat Polytechnic Uday Chand Kumar 05-03-2018 10-03-2018 After attending the course the participants will be able to
Interaction in Rural  have knowledge about the various scheme currently under operation.
Development  become aware of different constraints in implementation of schemes.
 discuss the existing structure of Panchayat in different states.
 Distinguish the powers and function of various bodies.
 identify the necessity of planning at different levels.
 have the knowledge about how to use the various schemes in rural
development.

38 NITTTR, Kolkata www.nitttrkol.ac.in


STTP SCHEDULE 2017 - 2018
B. E-LEARNING PROGRAMME (ON-LINE PROGRAMME DELIVERY THROUGH ICT MODE):

Government of India has approved two projects National Mission on Education through Information and Communication Technology (NME-ICT) (mission
document at www.sakshat.ac.in) and the National Programme on Technology Enhanced Learning’ (NPTEL) in order to leverage the potential of ICT in
providing high quality personalized and interactive knowledge modules over the internet to offer short term training programm es in cutting edge
technologies for the faculty of polytechnics and engineering colleges. In order to assist the Government in realizing the goals of these two Missions,
NITTTR, Kolkata has decided to offer programmes throughout 2017-2018. A list of the training programmes the Institute proposes to offer through ICT
Mode is provided below:
Date

Week
Sl. Programme
Prog Code Programme Title Programme Objectives
No Co-ordinator (s) From To
1. ICT01 Environmental Sailendra Nath 07-08-2017 11-08-2017 1 After attending the programme the participants will be able to acquire
Pollution and Impact Mandal  knowledge of basic Aar quality, drinking water quality, wastewater, construction
on Public Health water, noise quality, intensity of light and impact of each quality parameter on
human health,
 skill of handling conventional & modern sophisticated equipment, performing
related experiments in the laboratory, interpreting experimental results,
preparing related test-reports with remarks/comments (if any),
 attitude of hand-on working.
2. ICT02 Arc Welding Arpan Kr. Mondal 21-08-2017 25-08-2017 1 After attending the programme the participants will be able to
Processes  explain the principles of arc welding processes.
 perform arc welding processes operations indecently.
3. ICT03 Static and Dynamic Santanu Bhanja 11-09-2017 15-09-2017 1 After attending the programme, the participants will be able to
Analysis of Seismic  appreciate the underlying principles of earthquake resistant design of RC
Resistant RCC buildings for strength, stiffness and ductility
 differentiate between Static and Dynamic analysis and know the domain of their
Buildings
application
 use software in Seismic Analysis of RC Buildings
 familiar with the relevant clauses of IS:1893, IS:4326 and IS:13920
4. ICT04 Laboratory Soumitra Kumar 18-09-2017 22-09-2017 1 After completing the course the participant will be able to
Instruction Mandal  choose experiments from the detailed curriculum
 perform the experiments
 record and analyze the experimental data
 write the instruction manual for the students
 evaluate the laboratory performance of students
5. ICT05 Engineering Rayapati Subbarao 09-10-2017 13-10-2017 1 At the end of the programme, the participants will be to
Thermodynamics  basics of thermodynamics.
 thermodynamics in various problems.
 more about entropy and the processes of perfect gases.
 analyze thermodynamic air cycles.
 basics of fuels and combustion.

www.nitttrkol.ac.in NITTTR, Kolkata 39


STTP SCHEDULE 2017 - 2018
Date

Week
Sl. Programme
Prog Code Programme Title Programme Objectives
No Co-ordinator (s) From To
6. ICT06 Designing Effective Urmila Kar 06-11-2017 10-11-2017 1 After attending the programme, participants will be able to
Teaching under  analyze features of Outcome Based Education(OBE)
Outcome Based  identify learning-teaching system for OBE
 identify teaching skill components
Education
 select appropriate teaching strategies
 select appropriate teaching techniques
 prepare plan for specific instruction
 illustrate a few teaching skills with specific example
7. ICT07 Organizational Mithu Dey 13-11-2017 17-11-2017 1 After attending the program, participants are expected to be able to
 understand how to behave with the others
Behaviour
 set the goal
 manage the stress at workplace
 communicate with the others person
 work within the group
 learn to appreciate the others opinion
 understand the important of self existence
8. ICT08 Effective Training Sukanta Kumar 20-11-2017 24-11-2017 1 After attending the programme, participants will be able to
Naskar  identify different stages of a Training programme
 design a training programme
 evaluate a training programme
9. ICT09 Fluid Mechanics & Dipankar Bose 04-12-2017 08-12-2017 1 After attending the programme, the participants will be able to
Machinery  define different terms and concepts of fluid mechanics
 state various laws and principles
 explain working principles of various fluid machines
10. ICT10 Theory and Subrata 15-01-2018 19-01-2018 1 After attending the course the participants will be able to
Operations of Chattopadhyay  classify the Different types of Transducers & Actuators used in Industry.
Sensors, Transducers  familiar with the overview of measurement system and selection of instruments
 understand fundamental of pressure, flow, temperature, level, velocity,
& Actuators
acceleration, vibration, position, displacement measuring transducers used in
process industries.
 apply the Transducers Actuators in process Control Systems.
 know the concept of Intrinsic safety instruments
11. ICT11 Automated Nirmal Kumar 05-02-2018 09-02-2018 1 After attending the programme the participants will be able to
Manufacturing Mandal  explain Automation
Systems  analyse the performance of Automated Manufacturing System
12. ICT12 Laboratory Safety Subrata Mondal 19-02-2018 23-02-2018 1 After attending this program, participants would be able to
Management  demonstrate the safety management in the laboratory work area
 evaluate the risk assessment for the hazardous laboratory work
 identify the emergency and safety equipment for laboratory works
 demonstrate fire safety management in the laboratory work area
 explore about waste management for the laboratory works etc.

40 NITTTR, Kolkata www.nitttrkol.ac.in


STTP SCHEDULE 2017 - 2018
Date

Week
Sl. Programme
Prog Code Programme Title Programme Objectives
No Co-ordinator (s) From To
13. ICT13 Control & Automation Sagarika Pal 05-03-2018 09-03-2018 1 After completing the course the participant will be able to
 explain Conventional and complex control techniques for industrial automation
 apply microprocessor and microcontroller for process automation
 apply PLC and DCS for various control systems
14. ICT14 Review Course on Soil Jagat Jyoti Mandal 12-03-2018 16-03-2018 1 After attending the course the participants will be able to
Mechanics  explain basic concepts of Soil Mechanics and its applicability in Civil engineering
 apply these concepts to solve practical problems
 impart acquired knowledge to students in a systematic manner
15. ICT15 Various Schemes - Tushar Kanti Dey 19-03-2018 23-03-2018 1 After attending the course the participants will be able to
Implementation  understand the activities of the various scheme.
through Polytechnics  aware the role of polytechnic in implementing the scheme.
 prepare action plan of the scheme.
 involve PRI / NGO in implementing the scheme.
16. ICT16 Renewable Energy Sheela Yadav Rai 26-03-2018 30-03-2018 1 After attending the programme the participants will be able to:
 understand Energy Sources and their utilization
Sources and
 explain Environmental aspects of electric energies generation
Emerging  understand the scope of Solar Thermal Conversion and Solar Photovoltaic
Technologies system
 describe about wind energy, Geothermal energy and Biomass
 apply Non-conventional energies through various agencies viz.WBREDA

PROCEDURE:
The proposed programmes will be hosted in the Institutes’ website along with the dates of their commencement. Any technical institute can select the
programme it wants to participate and write directly to NITTTR, Kolkata for the programme and its date of commencement. In order to participate in
the e-Learning programme an Institute should have the following accessories as given in the next page.

GENERAL INSTRUCTIONS FOR ICT BASED TRAINING PROGRAMME:


1. Participating Institutes should ensure that ICT/e-class room is available and equipped with necessary hardware and software components and
inform the status to NITTTR, Kolkata well in advance (minimum 45 days before)
2. Minimum 75% attendance for each session is required for obtaining certificates
3. Attendance sheet has to be certified by the co-ordinator/Head of the Institute
4. After completion of the ICT based programme, all relevant documents (hard copies) such as, registration sheet, attendance she et, feedback
form etc., should be sent to NITTTR, Kolkata for further action
5. Provision of Tea & Snacks and Working Lunch (as per NITTTR, Kolkata norms) will be made to the participants
6. For any further clarification, kindly contact the programme co-ordinator of NITTTR, Kolkata

www.nitttrkol.ac.in NITTTR, Kolkata 41


STTP SCHEDULE 2017 - 2018

LIST OF EQUIPMENT: (Requirement in Polytechnics for Participating in ICT Mode Programmes)

Sl.
Item Configuration Quantity Remarks
No.
1. Workstation / PC 2 GB RAM, Intel Core 2 Duo Processor, Windows XP / Vista / 1 Can support up to four displays (1 graphics card has two outs)
Windows 7 OS, video capture cards
2. LCD Displays If single display mode: 1 desktop monitor could be used. As per the TVs can have both wall mount and stand facilities
availability (1-
If multi display mode: Projector (Dell LCD Projector Model 4) To support 4 displays, 2 graphics cards are needed, one can
1209)/Big LCD TV (42” recommended) could be used. support 2 outs
Note: Projectors should be connected to UPS
3. Camera Web Camera / Handy Camera 1 It would be better to have a tripod if using Handy Camera
4. Long cable to 1 Cable depends on the output port of camera
connect Camera
and PC
5. Audio Mixer Yamaha MG-102 Mixer 1 If professional Mike and speaker is being used
6. Microphone Professional Mike / headphone Mike according to the audience As per the need According to the user, you can have cordless or collar mike
7. Speakers Professional speaker / Head Phone As per the need According to the audience at teacher side
8. Long VGA Cables Length depends on the distance between PC and displays. 1-4 To connect displays to the PC (If PC is far away from the
Should be VGA male and Female connectors displays)
9. Keyboard 1
10. Mouse 1
11. DVI-VGA 0-4 (depends If PC’s video card (s) has DVI out for displays. For taking video
Convertors on the video output from PC to displays.
card(s) of the
PC)
12. Audio Cable & According to the input / output ports As needed To connect microphone and speakers to the mixer
Connectors
13. Digital Writing Pad iBall Take Note Premium A4 Optional For writing on whiteboard of A-VIEW (instead of mouse)
/Notepad

The approximate value in monetary terms of the equipment/accessories excluding the computer and the internet connection would be around Rs. 2.00 to Rs. 3.00
Lakh

42 NITTTR, Kolkata www.nitttrkol.ac.in


STTP SCHEDULE 2017 - 2018
C. STATE LEVEL SHORT TERM TRAINING PROGRAMMES AT EXTENSION CENTERS

(i) For participants from Technical Institutions in the State of ODISHA only.
Venue: NITTTR Kolkata Extension Centre BHUBANESWAR
Date
Sl. Programme

Week
From To
No
Prog Code Programme Title Co-ordinator (s)
Programme Objectives

1. BBSR01 Control Systems Prasanta Sarkar 03-04-2017 07-04-2017 1 After attending the programme, the participants will be able to
Analysis & Design  model physical systems
using MATLAB  analyze in time & frequency domain
 determine Input – output stability
 design controller
 apply MATLAB control system toolbox in simulation
2. BBSR02 Induction Training Subrata 17-04-2017 21-04-2017 1 After attending the course the participants will be able to understand the
Chattopadhyay  concept of Teaching Learning
 role of a Teacher
 instructional Objectives & Lesson Planning
 classroom Motivation
 measurement & Evaluation
 instructional Media & Computer Assisted Instruction(CAI)
 laboratory Development, Instruction & Evaluation
 construction of Test ITEMS
 design and Development of Projects for Students
3. BBSR03 Introduction to Santanu Bhanja 01-05-2017 05-05-2017 1 After attending the programme, the participants will be able to
ETABS Structural  be acquainted with the basic methodology of software application in structural
Analysis and Design analysis and design
 acquire the fundamentals of analysis and design of RC buildings
Software for Buildings
 Know the basic features of a universally accepted standard software like ETABS
 identify the important clauses of the relevant Indian Standards like IS:456-2000,
IS:1893 Part I-2016, IS:13920-2016, IS875 Part III-2015
4. BBSR04 Management of CDTP Uday Chand Kumar 29-05-2017 02-06-2017 1 After attending the course the participants will be able to
and PWD Scheme  understand the activities of the scheme.
 aware the role of polytechnic in implementing the scheme.
 prepare UC, SOA & PAR.
 prepare action plan of the scheme.
 involve PRI / NGO in implementing the scheme.

www.nitttrkol.ac.in NITTTR, Kolkata 43


STTP SCHEDULE 2017 - 2018
Date
Sl. Programme

Week
From To
No
Prog Code Programme Title Co-ordinator (s)
Programme Objectives

5. BBSR05 Research Subrata 12-06-2017 16-06-2017 1 After attending the course the participants will be able to understand the
Methodology Chattopadhyay  meaning, Objectives And Types Of Research
 qualities Of Researcher
 significance Of Research
 research Process
 research Problem
 features, Importance, Characteristics, Concepts And Types Of Research Design
 Case Study Research
 hypothesis And Its Testing
 sample Survey And Sampling Methods
6. BBSR06 Outcome Based Urmila Kar 19-06-2017 23-06-2017 1 After attending the programme, participants will be able to
Education and  explain the need for Outcome Based Education (OBE)
Accreditation  justify the requirement of Outcome Based Accreditation(OBA)
 identify parameters for OBA
 identify features of OBE
 illustrate steps for developing Outcome Based Curriculum (OBC)
 identify outcome based learning-teaching and assessment processes
 illustrate the process of assessment for OBA
7. BBSR07 Strategic Sukanta Kumar 24-07-2017 28-07-2017 1 After attending the programme, participants will be able to
Management Naskar  appreciate the importance of Strategic Management concept in technical
education system
 define strategic planning process
 identify components of strategic planning process
 develop action plan under strategic planning process in respective field
8. BBSR08 Advanced Process Subrata 07-08-2017 11-08-2017 1 After attending the course the participants will be able to
Control & Chattopadhyay  familiar with closed loop control system
Instrumentation  understand the pressure, Temperature, Flow & Level Measurement system
 know hazardous area classification
System
 utilize the electrical instruments in hazardous area in process plant
 design the conventional complex control system like ratio, cascade, feed forward,
selective, override etc
 apply the control system in distillation column in industry
 know the fundamental of PLC, DCS and SCADA
9. BBSR09 Quality Improvement Sekhar Chakraborty 14-08-2017 18-08-2017 1 The Training will enable the participant to
in institutional  identify the quality parameters in institutional activities
activities  explain principles underlying QMS
 explain fundamentals of TQM
 use basic management tools for day to day problem solving
 develop a strategic plan for quality improvement in polytechnic

44 NITTTR, Kolkata www.nitttrkol.ac.in


STTP SCHEDULE 2017 - 2018
Date
Sl. Programme

Week
From To
No
Prog Code Programme Title Co-ordinator (s)
Programme Objectives

10. BBSR10 Theory and Operation Subrata 21-08-2017 25-08-2017 1 After attending the course the participants will be able to
of DC Machines & Chattopadhyay  understand the working principle, operation and maintenance of the following
Transformers machines
 C Generator
 DC Motor
 Transformer
 Stepper Motor
 Brush less Motor
 classify the Hazardous areas in Industries for selecting the machines in operation
 familiar with the source of ignition in Industries.
 explain the Electrical Protection system used in Hazardous area.
 know the ingress protection.
11. BBSR11 Power Generation Sheela Yadav Rai 04-09-2017 08-09-2017 1 After attending the programme the participants will be able to
from Energy  understand potential sources of conventional energies for power generation
Resources  describe potential sources of non-conventional energies for power generation
 understand environmental aspects of power generation
 appreciate about various power projects
12. BBSR12 Application of Sagarika Pal 09-10-2017 13-10-2017 1 After completing the course the participant will be able to
MATLAB, Control  use MATLAB commands
System, Image  apply Control System Tool Box Commands
 illustrate Simulink Modeling techniques
Processing and Fuzzy
 apply Image processing Tool Box Commands
Logic Tool box  apply Fuzzy Logic Tool Box Commands
13. BBSR13 Laboratory Subrata 16-10-2017 20-10-2017 1 After attending the course the participants will be able to
Development Chattopadhyay  familiar with the Laboratory Experiments as per curriculum
 prepare the list of equipment for the laboratory
 design and Develop the Laboratory Experiments
 develop the Laboratory Instruction
 understand the method of Laboratory Evaluation
14. BBSR14 Topics in Discrete Kinsuk Giri 06-11-2017 10-11-2017 1 After attending the program, the participants will be able to
Mathematics  understand the fundamentals of discrete mathematics
 solve problems in various areas of discrete mathematics
 apply SCILAB to solve few discrete math problems
15. BBSR15 Testing Drinking Sailendra Nath 13-11-2017 17-11-2017 1 After attending the programme the participants will be able to acquire –
Water for Domestic Mandal  knowledge of basic concept of Drinking Water quality and impact of each quality
Use parameter on human health, testing of drinking water parameters,
 skill of handling some kit, performing related experiments, interpreting
experimental results, preparing related test-reports with remarks/comments ,
 attitude of hand-on working in the laboratory/field

www.nitttrkol.ac.in NITTTR, Kolkata 45


STTP SCHEDULE 2017 - 2018
Date
Sl. Programme

Week
From To
No
Prog Code Programme Title Co-ordinator (s)
Programme Objectives

16. BBSR16 Theory, Operation Subrata 20-11-2017 24-11-2017 1 After attending the course the participants will be able to
and Applications of Chattopadhyay  classify the Different types of Transducers & Actuators used in Industry.
Transducers &  familiar with the overview of measurement system and selection of instruments
 understand fundamental of pressure, flow, temperature, level, velocity,
Actuators in Industry
acceleration, vibration, position, displacement measuring transducers used in
process industries.
 apply the Transducers Actuators in process Control Systems.
 know the concept of Intrinsic safety instruments
17. BBSR17 Engineering Rayapati Subbarao 27-11-2017 01-12-2017 1 At the end of the programme, the participants will be to
Thermodynamics  the basics of thermodynamics.
 of thermodynamics in various problems.
 more about entropy and the processes of perfect gases.
 analyze thermodynamic air cycles.
 the basics of fuels and combustion.
18. BBSR18 Modeling and Analysis Urmila Kar 04-12-2017 08-12-2017 1 After attending this programme, the participants will be able to
of Control Systems  explain terminologies related to linear and nonlinear control systems
using MATLAB  explain the need for control system analysis
 develop mathematical representation of control systems using MATLAB
 illustrate approaches for control system analysis using MATLAB /SIMULINK
 simulate models for analysis of linear and nonlinear control systems using MATLAB
programming / SIMULINK
 demonstrate application of MATLAB control system tool box for designing
experiments on control system
19. BBSR19 Analysis and Design Jagat Jyoti Mandal 11-12-2017 15-12-2017 1 After attending the course the participants will be able to
of Foundation  determine settlement and bearing capacity of shallow foundations and deep
Systems foundation
 design different types of shallow foundations
 isolated, combined footing and raft foundation and
 components of deep foundations as per relevant IS codal recommendations.
 teach the related topics in more efficient manner
20. BBSR20 Disaster Management Uday Chand Kumar 18-12-2017 22-12-2017 1 After attending the programme, the participants will be able to
- an Awareness  define disaster
Programme for the  describe different types of disaster
 identify the causes of disaster
Polytechnic and
 describe types of safety required before disaster
Engineering College  take remedial action after the disaster
Teachers  mitigate the area of disaster
21. BBSR21 Design of Concrete Tushar Kanti Dey 08-01-2018 12-01-2018 1 After attending the course the participants will be able to
Mix  acquire the knowledge of different building materials
 explain the importance of mix design
 design mix for various concrete

46 NITTTR, Kolkata www.nitttrkol.ac.in


STTP SCHEDULE 2017 - 2018
Date
Sl. Programme

Week
From To
No
Prog Code Programme Title Co-ordinator (s)
Programme Objectives

22. BBSR22 Developments of Nirmal Kumar 15-01-2018 19-01-2018 1 After attending the programme the participants will be able to
Laboratory Mandal  acquire Different types of employable skills.
Instructions  assess the performance of learner.
23. BBSR23 Advanced Control Prasanta Sarkar 29-01-2018 02-02-2018 1 After attending the programme, the participants will be able to
System with MATLAB  understand the recent trends in automation & control
Simulation  use modern control technique in controller design
 us robust control technique in controller design
 implement intelligent control techniques
 apply MATLAB Control System Toolbox
24. BBSR24 Introduction to Rajeev Chatterjee 05-02-2018 09-02-2018 1 After going through this program the participants will be able to
Coding Theory  explain Information, quality of Information, information entropy,
 demonstrate the Working principles and design of AES and DES,
 demonstrate various encoding algorithm like Arithmetic Huffman, Hamming, Gray,
and
 demonstrate the application on various network applications.
25. BBSR25 Application of Revised Santanu Bhanja 19-02-2018 23-02-2018 1 After attending the programme the participants are likely to be able to
Code IS 1893-Part 1 :  understand the modifications suggested as per the revised (2016) Standard of
2016 in Earthquake IS:1893 with respect to its 2002 version
Resistant Design of  appreciate the underlying principles of earthquake resistant design of R. C.
Buildings buildings
 differentiate between Static and Dynamic analysis and know the domain of their
application
 use a member standard software in seismic analysis and design as per IS 1893-
Part 1 :2016
 design RC elements for earthquake resistance and investigate their behavior up to
the failure levels
Participants will be awarded a complete unlimited licenced version of
STAAD.Pro v8i & Staad.foundation Advanced v8i for personal use on their PC’s
for full one year for academic purpose
26. BBSR26 Cyber Security Indrajit Saha 26-02-2018 02-03-2018 1 After attending the program, the participants will be able to
 describe the fundamentals of Cyber Security
 demonstrate how to maintain the privacy of computer data
 explain cyber security in classroom
27. BBSR27 Teaching of Samiran Mandal 05-03-2018 09-03-2018 1 After attending the programme, the participants will be able to
Engineering  explain different concepts in engineering machine
Mechanics  perform lesson plan for a class evaluate student performance
28. BBSR28 Intelligent Textile Subrata Mondal 12-03-2018 16-03-2018 1 After attending this program, participants would be able to
Materials  explore the concept of intelligent materials and systems.
 describe the phase change materials and its applications in the textile fields.
 explain the shape memory polymers and its applications in textiles.
 describe the electroactive materials and its application in textiles.
 explore the intelligent textiles for space, defences etc.

www.nitttrkol.ac.in NITTTR, Kolkata 47


STTP SCHEDULE 2017 - 2018
Date
Sl. Programme

Week
From To
No
Prog Code Programme Title Co-ordinator (s)
Programme Objectives

29. BBSR29 Hydraulics & Dipankar Bose 19-03-2018 23-03-2018 1 After attending the programme the participants will be able to
Pneumatics  describe various elements of oil powered hydraulic systems
 illustrate working principles of air powered pneumatic systems
30. BBSR30 Approaches in Sukanta Kumar 26-03-2018 30-03-2018 1 After attending the programme, participants will be able to
Developing Technical Naskar  appreciate the overview of curriculum development
Curriculum  acquainted stages of curriculum development
 identify different approaches of curriculum development
 apply few approaches in technical curriculum

48 NITTTR, Kolkata www.nitttrkol.ac.in


STTP SCHEDULE 2017 - 2018
(ii) For participants from Technical Institutions in North East States only

Venue: NITTTR Kolkata Extension Centre GUWAHATI

Date

Week
Sl. Prog Programme
No Code
Programme Title Co-ordinator (s)
Programme Objectives
From To

1. GUW01 Developing Sekhar Chakraborty 17-04-2017 21-04-2017 1 The Training will enable the participant to
Entrepreneurship among  identify the importance of entrepreneurship development
students-role of polytechnic  inculcate basic entrepreneurial characteristics among the students
 differentiate between various types of enterprise
teachers
 describe what is entrepreneurial
 analyse various stages of entrepreneurial development
 help students draw up business proposals
2. GUW02 Control Systems Analysis & Prasanta Sarkar 24-04-2017 28-04-2017 1 After attending the programme, the participants will be able to
Design using MATLAB  model physical systems
 analyze in time & frequency domain
 determine Input – output stability
 design controller
 apply MATLAB control system toolbox in simulation
3. GUW03 Design of Outcome Based Urmila Kar 15-05-2017 19-05-2017 1 After attending the programme, participants will be able to
Curriculum  explain the need for Outcome Based Education (OBE)
 identify features of OBE
 illustrate procedure for developing Outcome Based Curriculum (OBC)
 develop Educational objectives and Outcomes of specific programme
 decide courses under a specific programme
 develop content of specific course
 Illustrate the procedure for designing schemes of study and assessment for
OBC
4. GUW04 MATLAB Application in Sagarika Pal 29-05-2017 02-06-2017 1 After completing the course the participant will be able to
Engineering  use MATLAB commands
 apply Control System Tool Box Commands
 illustrate Simulink Modeling techniques
 apply Image processing Tool Box Commands
 apply Fuzzy Logic Tool Box Commands
5. GUW05 Introduction to Coding Rajeev Chatterjee 03-07-2017 07-07-2017 1 After going through this program the participants will be able to
Theory  explain Information, quality of Information, information entropy,
 demonstrate the Working principles and design of AES and DES,
 demonstrate various encoding algorithm like Arithmetic Huffman, Hamming,
Gray, and
 demonstrate the application on various network applications.

www.nitttrkol.ac.in NITTTR, Kolkata 49


STTP SCHEDULE 2017 - 2018
Date

Week
Sl. Prog Programme
No Code
Programme Title Co-ordinator (s)
Programme Objectives
From To

6. GUW06 Air, Water Quality and Sailendra Nath 24-07-2017 28-07-2017 1 After attending the programme the participants will be able to acquire –
Health Mandal  knowledge of basic concept of air, drinking water quality parameter and
impact of each parameter on human health,
 skill of handling some kit, performing related experiments, interpreting
experimental results, preparing related test-reports with remarks/comments (if
any),
 attitude of hand-on working in the laboratory/field
7. GUW07 Concept Teaching in Fluid Dipankar Bose 28-08-2017 01-09-2017 1 After attending the programme, the participants will be able to
Mechanics  understand the idea of concept teaching
 identify the major concepts in fluid mechanics
 work out a strategy for teaching fluid mechanics
8. GUW08 Laboratory & Workshop Soumitra Kumar 04-09-2017 15-09-2017 2 After completing the course the participant will be able to
Manual for Electrical, Mandal  choose experiments from the detailed curriculum
Electronic and  write the instruction manual for students
 evaluate the laboratory performance of students
Instrumentation
Engineering
9. GUW09 Waste Water Treatment: Subrata Mondal 11-09-2017 15-09-2017 1 After
attending this program, participants would be able to
Pollution Control and Reuse  explain the characterizations of wastewater.
 explore the characteristics of various industrials wastewater.
 describe the wastewater treatment using low cost adsorbents and nano sized
adsorbents.
 describe the wastewater treatment using membrane technology etc.
10. GUW10 Designing Assessment tools Urmila Kar 18-09-2017 22-09-2017 1 After attending the programme, participants will be able to
for effective implementation  analyze components of Technical Curriculum
of Technical Curriculum  identify aim and objectives of the specific curriculum
 explain the need for assessment tools
 prepare intended learning outcomes
 design assessment tools for intended learning outcomes
 identify issues related to effective assessment
11. GUW11 Gradation of Students Samiran Mandal 16-10-2017 20-10-2017 1 After attending the programme, the participants will be able to
Performance  explain the basic concepts in assessment and evaluation
 describe different methods of grading
 select a proper grading system for a situation
12. GUW12 Machine Learning and It’s Indrajit Saha 23-10-2017 27-10-2017 1 After attending the program, the participants will be able to
Applications  describe the fundamentals of Machine Learning (ML)
 apply ML for clustering, classification and regression
 explain machine learning in classroom

50 NITTTR, Kolkata www.nitttrkol.ac.in


STTP SCHEDULE 2017 - 2018
Date

Week
Sl. Prog Programme
No Code
Programme Title Co-ordinator (s)
Programme Objectives
From To

13. GUW13 Fundamental Concepts of Jagat Jyoti Mandal 06-11-2017 10-11-2017 1 After attending the course the participants will be able to
Geotechnical Engineering  explain basic concepts of Geotechnical Engineering and its applicability in Civil
engineering
 apply these concepts to solve practical problems
 impart acquired knowledge to students in a systematic manner

14. GUW14 Application of Auto CAD in Tushar Kanti Dey 13-11-2017 17-11-2017 1 After attending the course the participants will be able to
Engineering Drawing  draw basic drawing
 draw different sections of structures
 draw 2D and 3D drawing
15. GUW15 Estimating & Costing of Sheela Yadav Rai 20-11-2017 24-11-2017 1 After attending the programme the participants will be able to
 describe various type of Non-conventional Energies Sources
Non-Conventional Energies
 understand the scope of Solar energy, Solar Thermal Conversion, Solar
Collector, Wind Energy
 estimating & costing of various energies
16. GUW16 Strategic Management Sukanta Kumar 18-12-2017 22-12-2017 1 After attending the programme, participants will be able to
Naskar  appreciate the importance of Strategic Management concept in technical
education system
 define strategic planning process
 identify components of strategic planning process
 develop action plan under strategic planning process in respective field
17. GUW17 How to write Thesis or Rayapati Subbarao 08-01-2018 12-01-2018 1 At the end of the programme, the participants will be to
Research paper  describe the steps involved in writing a thesis.
 identify the scope of a thesis.
 construe the results in a better way.
 derive conclusions from the plots and contours made.
 discover the ways of writing a research paper
18. GUW18 Advanced Control System Prasanta Sarkar 15-01-2018 19-01-2018 1 After attending the programme, the participants will be able to
with MATLAB Simulation  understand the recent trends in automation & control
 use modern control technique in controller design
 us robust control technique in controller design
 implement intelligent control techniques
 apply MATLAB Control System Toolbox
19. GUW19 Approaches in Developing Sukanta Kumar 29-01-2018 02-02-2018 1 After attending the programme, participants will be able to
Technical Curricula Naskar  appreciate the overview of curriculum development
 acquainted stages of curriculum development
 identify different approaches of curriculum development
 apply few approaches in technical curriculum
20. GUW20 Arc Welding Processes Arpan Kr. Mondal 05-02-2018 09-02-2018 1 After attending the programme the participants will be able to
 explain the principles of arc welding processes.
 perform independently various arc welding processes.

www.nitttrkol.ac.in NITTTR, Kolkata 51


STTP SCHEDULE 2017 - 2018
Date

Week
Sl. Prog Programme
No Code
Programme Title Co-ordinator (s)
Programme Objectives
From To

21. GUW21 Evaluating Students’ Habiba Hussain 12-02-2018 16-02-2018 1 After attending the programme, participants are expected to be able to
Performance & Designing  identify the principles of evaluation
Question Papers  distinguish between types of evaluation
 design a plan for question paper
 develop questions
22. GUW22 Topics in Discrete Kinsuk Giri 12-03-2018 16-03-2018 1 After attending the program, the participants will be able to
Mathematics  understand the fundamentals of discrete mathematics
 solve problems in various areas of discrete mathematics
 apply SCILAB to solve few discrete math problems
23. GUW23 Making Effective Sekhar Chakraborty 19-03-2018 23-03-2018 1 The training will enable the participant to
Presentations [practice  make presentations effectively in any kind of situation
based training]
24. GUW24 Advanced Process Control Subrata 26-03-2018 30-03-2018 1 After
attending the course the participants will be able to
& Instrumentation System Chattopadhyay  familiar with closed loop control system
 understand the pressure, Temperature, Flow & Level Measurement system
 know hazardous area classification
 utilize the electrical instruments in hazardous area in process plant
 design the conventional complex control system like ratio, cascade, feed
forward, selective, override etc
 apply the control system in distillation column in industry
 know the fundamental of PLC, DCS and SCADA

52 NITTTR, Kolkata www.nitttrkol.ac.in


STTP SCHEDULE 2017 - 2018
NORMS OF THE PROGRAMMES
i). In-House Programmes
Demand based training programmes/workshop will be organized in the campus of the client institutes with flexible duration according to the convenience
of the clients. The expenditure for programmes conducted at Govt./Govt. aided technical institutions, excluding those institutions covered under TEQIP,
will be borne by NITTTR, Kolkata according to the norms of the Institute. Course fee will be charged for conducting such programmes in other categories
of technical institutions (For details, please visit us at www.nitttrkol.ac.in).
The following of Topics are offered
Sl. No. Topics Sl. No. Topics
1. Introduction to MATLAB, SIMULINK, Control System and Image Processing Toolbox 30. CAD/CAM
2. Iterative Presentation using Multimedia Tools and Document Creation with LaTeX 31. Computations and Optimization with MATLAB
3. LABVIEW & MATLAB Applications in Engineering 32. Concept Teaching in Fluid Mechanics
4. Micro-teaching 33. Control Systems – Analysis & Design using MATLAB
5. Network Principles 34. Database Design
6. Office Management using Information and Communication Technology 35. Design and Development of e-Learning System
7. Optical Communication 36. Design and Implementation of Outcome Based Curriculum
8. Outcome based Education and Accreditation 37. Design and Implementation of Technical Curriculum
9. Pedagogical aspects of Laboratory Experiments and Students Project 38. Development of Laboratory Instruction and Manual
10. Pedagogy 39. Development of Soft Skill
11. Preparation of Laboratory Manual 40. Disaster Management
12. Preparation of Materials and Processes 41. Drinking Water & Ambient Air Quality
13. Process Control & Automation 42. Effective Teaching
14. Quality Improvement and NBA Accreditation 43. Environmental Awareness
15. Quality Improvement in Classroom Teaching 44. Essentials of Educational Technology
16. Quality Improvement Initiatives in Technical Institutions 45. Essentials of Outcome based Education
17. Quality Management in Teaching - Learning System 46. Evaluating Students' Performance
18. Quality Management System / Quality Control Tools L 47. Exposure on MATLAB
19. Renewable Energy and Emerging Technology 48. Faculty Development Programme on Pedagogy Training
20. Research Methodology in Technical Education 49. Faculty Orientation Programme on Institutional Improvement
21. Rural Development and Solid Waste Management 50. Fundamental Concepts of Geotechnical Engineering
22. Sensors, Measurement and Signal Conditioning 51. Fundamental of Computer Application for Engineering and Basic Science
23. Skill Development in Laboratory & Workshop 52. Fundamentals and Applications of Nanomaterials
24. Soft Computing, Artificial Intelligence 53. Human Resource Management
25. Teaching Control Systems 54. Image Processing using MATLAB
26. Teaching Techniques and Student Evaluation 55. Induction Training
27. Use of ICT for Teaching - Learning System 56. Institutional Development & Management
28. Role of Pedagogy in Engineering Education and Curriculum Development 57. Internetworking: Principles, Concepts and Applications
29. Advanced Computer Aided Drafting 58. Introduction to Finite Element Method in Engineering

www.nitttrkol.ac.in NITTTR, Kolkata 53


STTP SCHEDULE 2017 - 2018

ii). Special Programmes

Tailor-made training Programmes/Workshops will be conducted at the main campus or any one of the Extension Centres of the Institute at
Bhubaneswar/Guwahati to cater to the special needs felt by the Directorates of Technical Education or organizations/Industry. Interested participants
are invited to send their proposals to the Director, NITTTR, Kolkata.

iii). Collaborative Programmes

Such programmes will be conducted in collaboration with technical institutions / industries by sharing of resources on chargeable basis. The Institute
has organized such programmes in collaboration with national and international organizations like Colombo Plan Staff College, United Nations Educational,
Scientific & Cultural Organization (UNESCO), United Nations International Children’s Emergency Fund (UNICEF), United Nations Development
Programme, Department of Science & Technology, Govt. of West Bengal and Industries like Indian Oil Corporation and various reputed technical
institutions. Special courses were offered for personnel of Indian Railways Institute of Mechanical and Electrical Engineering and State Resource Centre
for Adult Education, West Bengal. Interested organizations/ institutions are invited to contact Director, NITTTR, Kolkata.

PARTICIPANTS’ PROFILE

The training programmes are open to sponsored in service teachers and staff of degree and diploma level technical institutions of the country and also to the
sponsored serving professionals from field / industry.
However, the programmes organized at Extension Centers are open to participants, only from technical institutions of respective State/ Region, as specified.

Financial Norms

a) Course Fees:
Participants from Institute covered under TEQIP shall be charged of Rs. 7000/- (Rupees Seven Thousand only) per participants / per week for STTPs conducted
at NITTTR, Kolkata and its Extension Centres only.
The fee has to be paid through a demand draft in favour of “Director, NITTTR, Kolkata” payable at any branch of any bank at Kolkata, in advance, prior to
commencement of programme.

Furthermore, TA/DA will not be paid to the participants from our Institution and hostel charges have to be paid by the participants, if availing hostel
accommodation.

However, there is No Course Fee for the participants from Govt./Govt.-Aided/Self-Financed institutions, but not covered under TEQIP.

54 NITTTR, Kolkata www.nitttrkol.ac.in


STTP SCHEDULE 2017 - 2018
b) Facilities:
The participants from Govt./Govt.-aided technical institutions, excluding those from institutions covered under TEQIP, are entitled for reimbursement of
TA/DA by NITTTR, Kolkata as per norms.

TA will be reimbursed as per entitlement (Govt. of India Rules). (Please visit us at www.nitttrkol.ac.in)
Air fare will only be reimbursed if travelled by Air India and Air Ticket(s) are purchased directly from Air India/from the Official Website of Air India.
Air Ticket may be purchased from Authorized travel agent of Govt. of India as announced from time to time. As of now authorized travel agent of Govt. of
India are M/s Ashoke Tours & Travels, M/s Balmer Lawrie and IRCTC.
However, TA/DA for other participants are to be borne by the sponsoring authority or self. Working Lunch and training materials would be provided to all
participants attending training programmes.

c) Hostel:

Accommodation is available in the Institute Hostel on first-come-first-served basis from Sunday to Saturday during training days but family accommodation
would not be available.
Hostel Charge for STTPs conducted at NITTTR, Kolkata and its Extension Centres are given below for participants from Institutions covered under TEQIP,
Self Finance Institute and Industry.

Sl. Types of Boarder Rate (INR)


No.
1 TEQIP/Self Finance Institute/Industry Participants 200/- per day per bed
2 Meal Charges of TEQIP/Private Self Finance 250/- per day per participants.
Institute/Industry Participants

How to Apply
Intending participants may use photocopy of the Application Form given on Page No. 58 for registration to each STTPs. The filled in form should be sent
through proper channel/appropriate sponsoring authority. Application Form should be sent to the Academic Co-ordinator for STTPs at NITTTR, Kolkata and
to the Consultant in respective Extension Centre.

www.nitttrkol.ac.in NITTTR, Kolkata 55


STTP SCHEDULE 2017 - 2018

How to Reach NITTTR, Kolkata

The Institute is located near Labony Bus Stand (Sector-III) in Salt Lake City and can be reached by taxi from Netaji Subhas Chandra Bose International
Airport and also from Howrah, Shalimar, Sealdah and Kolkata Railway Stations.

Distance
 Howrah Railway Station 42 min (8.1 km) via Maniktala Main Road
 Sealdah Station 26 min (7.4 km) via Beliaghata Main Road and Broadway Rd
 Kolkata Railway Station 16 min (4.8 km) via Canal Circular Rd
 Shalimar Station 38 min (18.8 km) via Parama Island Flyover
 Netaji Subhas Chandra Bose International Airport 27 min (11.5 km) via Kazi Nazrul Islam Sarani/VIP Rd

56 NITTTR, Kolkata www.nitttrkol.ac.in


STTP SCHEDULE 2017 - 2018

GENERAL INSTRUCTIONS

1) Please send your application preferable 30 days before the commencement of the programme.
2) Normally course will commence at 10:00 a.m. as per venue. Participants are advised to registration before 10:00 a.m. on the first day
of the programme.
3) Outstation participants are advised to avail the Hostel facility one day before the commencement of their programme.
4) In all cases, the selection letters will be despatched one month before the date of commencement of the course.
5) All applications should be forwarded through proper channel. Application without the recommendation of the sponsoring authority will
not be entertained.
6) All participants should have to produce the release letter at the time of the joining in the course. Separate release order should be
produced against each course.
7) Applicants may send their application by Post/Fax or the same can be directly submitted in the Despatch Section of NITTTR, Kolkata.
8) In case the date of commencement of course happens to be a holiday, the course may be held as announced.
9) Participants are requested to submit only one Application for a particular Short-Term Training Programme.
10) The selection list for each STTP will be available on the Website or over phone (No. +91-33-2358-7442) 1(One) week before the
commencement of the Programme.
11) Air Travel will be allowed in Economy Class by Air India only. The teachers should submit Boarding Pass with TA bills.

www.nitttrkol.ac.in NITTTR, Kolkata 57


STTP SCHEDULE 2017 - 2018

58 NITTTR, Kolkata www.nitttrkol.ac.in


STTP SCHEDULE 2017 - 2018

Faculty Profile

Dr. Phalguni Gupta


Phone: 91 (033) 2337-0479/4125/ 66251919 (Extn: 212)
Email: pg.nitttr.kol@gmail.com / phalgunigupta@nitttrkol.ac.in

Phalguni Gupta who is a Professor in the Department of Computer Science & Engineering, Indian Institute of Technology Kanpur (IITK), Kanpur, India, has
joined this Institute (on Deputation) as the Director with effect from 25 April 2014. He received the Doctoral degree from Indian Institute of Technology
Kharagpur, India in 1986. He works in the field of biometrics, data structures, sequential algorithms, parallel algorithms, image processing. He is an author
of 3 books and 14 book chapters. He has published more than 300 papers in International Journals and International Conferences. He was the Principal
Investigator of several research projects in the area of Biometric Systems, Image Processing, Graph Theory and Network Flow. Prior to joining IITK in 1987,
he worked in Space Applications Centre Ahmedabad, Indian Space Research Organization, India.

“A teacher can never truly teach unless he is still


learning himself. A lamp can never light another lamp
unless it continues to burn its own flame.”

- Rabindra Nath Tagore

www.nitttrkol.ac.in NITTTR, Kolkata 59


STTP SCHEDULE 2017 - 2018
List of Short-Term Training Programme
Dr. Anuradha De
SL. Prog. Programme Title Date
Phone: 91 (033) 66251992 (D)/66251919 (Extn: 992) No Code From To
Email: anuradhade52@yahoo.com/anuradha@nitttrkol.ac.in 1. CU17 Experiments with / 15-05-2017 19-05-2017
without Computer
Interfacing kit for Young
Engineers and Scientists
2. CU22 Optical Fibre & Laser: 05-06-2017 09-06-2017
Dr. Anuradha De is a faculty member in the Department of Electrical Engineering. As a National Principles & Applications
scholar, she joined and graduated from Lady Brabourne College, Kolkata with Physics Honours, 3. CU33 Electromagnetic Waves & 19-06-2017 23-06-2017
post graduated from Science College and Ph.D from Saha Institute of Nuclear Physics. All these their Applications
degrees were conferred on her by the University of Calcutta. She did her post doctoral work in 4. CU43 Semiconductor Devices & 10-07-2017 14-07-2017
Osaka University, Japan. Solar PV Module
Apart from her interest in the field of Applied Physics, her interested areas include subjects 5. CU54 Introduction to MATLAB, 24-07-2017 28-07-2017
SIMULINK & GUI
related to laser & Optical fibre, computer interfacing, Matlab software and solar energy. Since
6. CU68 Fibre Optic 21-08-2017 25-08-2017
joining at the Institute in 1996, Dr. De has offered several STTPs in the above mentioned areas. Communication
Around 30 numbers of International / National / Conference papers and one book on 'Optical 7. CU72 Experiments with / 04-09-2017 08-09-2017
fibre & Laser: Principles & Applications', published by New Age International Publisher are in her without Computer
credits. She coordinated actively in developing various training package on 'Textile, Clothing & Interfacing Kit for Young
Footwear' during 2003-2005 under National Vocational Education Qualification and Certification Engineers and Scientists
Framework (NVEQCF) programme of MHRD and various curricula on 'Retail' during 2009-2011 8. CU83 Physics of Materials 18-09-2017 22-09-2017
under National Skill Development Mission (NSDM) of MHRD, Government of India. Apart from 9. CU90 Semiconductor Devices & 23-10-2017 27-10-2017
her various administrative activities of the Institute, at present, she is also involved in TEQIP II Solar PV Module
activities of SPFU of West Bengal under NPIU, Government of India. 10. CU95 Optical Fibre & Laser: 06-11-2017 10-11-2017
Principles & Applications
11. CU102 Introduction to MATLAB, 13-11-2017 17-11-2017
SIMULINK & GUI

“Education is the manifestation of the divine


perfection, already existing in man.”
- Swami Vivekananda

60 NITTTR, Kolkata www.nitttrkol.ac.in


STTP SCHEDULE 2017 - 2018

Shri Arpan Kr. Mondal


Phone: +91(033) 66251985(D)/ 66251919 (Extn. 985) List of Short-Term Training Programme
Email: arpan.nitttrk@gmail.com /arpan@nitttrkol.ac.in
SL. Prog. Programme Title Date
No Code From To
1. CU27
1 Laboratory Practices in Mechanical 05-06-2017 16-06-2017
Engineering
2. CU38 Basic Computer Applications for 26-06-2017 07-07-2017
Shri Arpan Kumar Mondal is a faculty member in the Department of Mechanical Engineering,
Faculty and Staffs
National Institute of Technical Teachers’ Training & Research Kolkata. He is currently pursuing
3. CU51 Theory and Practices on Machine 17-07-2017 28-07-2017
his doctoral study in Mechanical Engineering at Indian Institute of Technology Guwahati. He Tools, CNC and Modern Welding
did M. Tech from National Institute of Technology Rourkela and B. Tech from Haldia Institute Methods
of Technology under WBUT. He has 14+ publications in reputed International Journals and 4. ICT02 Arc Welding Processes 21-08-2017 25-08-2017
Conferences. He has been a reviewer of more than 5 international journals. Apart from 5. CU74 Theory and Practices on Various 05-09-2017 15-09-2017
Teaching and R&D, he has also been involved in several projects, organizing Welding Processes, Machine Tools
workshops/conferences, installation of labs, preparation of course materials etc. and CNC
6. CU110 Advanced Welding Processes, NDT, 11-12-2017 22-12-2017
His areas of interests include Welding Technology, Fusion welding processes, Submerged Arc CNC and Mechanical Testing
7. CU125 Drafting and Research Tools for 08-01-2018 19-01-2018
Welding, Computational Welding Mechanics, Heat transfer in welding, Residual stress and
Engineer and Scientists
distortion, Application of optimization in manufacturing, Production Engineering,
8. GUW20 Arc Welding Processes 05-02-2018 09-02-2018
Manufacturing Technology, Plastics Technology, Composites and Bio-materials for artificial
implants.

“Education is the most powerful weapon which


you can use to change the world.”
- Nelson Mandela
www.nitttrkol.ac.in NITTTR, Kolkata 61
STTP SCHEDULE 2017 - 2018

Dr. Dipankar Bose


Phone: 91 (033) 66251981 (D)/ 66251919 (Extn: 981)
List of Short-Term Training Programme
Email: dipan88@yahoo.co.in/dbose@nitttrkol.ac.in
SL. Prog. Programme Title Date
No Code From To
1. CU46 Turning, Milling and Drilling 10-07-2017 21-07-2017
2. CU60 Fluid Power 07-08-2017 11-08-2017
Dr. Dipankar Bose is a faculty member in the Department of Mechanical Engineering and his
3. GUW07 Concept Teaching in Fluid 28-08-2017 01-09-2017
present research area includes Non-traditional Engineering, Reliability Engineering, Welding
Mechanics
Technology, Fluid Power Engineering etc. He graduated from the University of Calcutta, 4. CU98 Hydraulic Machines 06-11-2017 10-11-2017
India in Mechanical Engineering and received his post graduate and doctoral degrees in the 5. ICT09 Fluid Mechanics & Machinery 04-12-2017 08-12-2017
area of Mechanical Engineering from Jadavpur University, Kolkata. 6. CU115 Laboratory Manual Preparation 18-12-2017 22-12-2017
Since joining at the Institute from NERIST, Deemed University, Arunachal Pradesh in 2003, (Mechanical Engineering)
Dr. Bose has offered several STTPs in the areas of Non-Traditional Machining, Fluid Power 7. CU123 Non Traditional Machining 08-01-2018 12-01-2018
Technologies, Various Welding Processes, Fabrication Techniques, Metrology and processes
Measurement. He has published more than 40 papers in various international and National 8. CU135 Skill Development in Workshop 12-02-2018 16-02-2018
Journals and Proceedings and is a life member of ISTE. At present, he is the Chairman, 9. BBSR29 Hydraulics & Pneumatics 19-03-2018 23-03-2018
Purchase Committee of the Institute. Beside this, he is also a member of other external
academic bodies of WBUT.

“An investment in knowledge pays the best


interest.”
- Benjamin Franklin

62 NITTTR, Kolkata www.nitttrkol.ac.in


STTP SCHEDULE 2017 - 2018

Dr. Habiba Hussain


Phone: 91 (033) 66251947 (D)/ 66251919 (Extn: 947)
Email: habs2@rediffmail.com/habiba.hussain@nitttrkol.ac.in List of Short-Term Training Programme

Sl. Prog. Programme Title Date


No Code From To
1. PS01 Induction Training – Phase I 24-04-2017 05-05-2017
Dr. Habiba Hussain is a faculty member in the Department of Education and Management. A 2. MGT02 Research Methodology in 03-07-2017 07-07-2017
Technical Education
post-graduate in Bio-Sciences (Spl. Biotechnology) & in Education, she earned her Doctorate
3. MGT04 Basic Managerial Skills for 17-07-2017 28-07-2017
Degree in Education from GGDU, Bilaspur, M.P.
Teachers
She joined this Institute in January, 2002. She has teaching and training experience of more than 4. PS09 Student Mentorship 07-08-2017 11-08-2017
15 years. She has been actively involved in the long-term as well as short-term training 5. PS12 Leadership & Team Building in 11-09-2017 15-09-2017
programmes since 2002. She has also contributed towards the world-bank research projects Academia
under Tech-Ed II. Since her joining in this Institute, she has offered training programmes in 6. PS13 Designing Student Centered 09-10-2017 13-10-2017
several themes under the broader areas of Educational Technology, Educational Psychology, Instruction
Management in Education, HRM, Soft Skills, Research Methodology, Educational Measurement & 7. PS14 Outcome Based Assessment 06-11-2017 10-11-2017
Evaluation. 8. PS16 Effective Teaching 11-12-2017 15-12-2017
She is in the editorial board of IJVE, a bi-annual peer reviewed research journal published by 9. PS17 Outcome Based Education & 15-01-2018 19-01-2018
PSSCIVE, India. She is a life member of several academic bodies. She has published several Accreditation
papers and articles in journals & conferences. 10. PS18 Microteaching for improving 29-01-2018 02-02-2018
Teaching Skills
11. GUW21 Evaluating Students’ 12-02-2018 16-02-2018
Performance & Designing
Question Papers
12. PS20 Induction Training – Phase II 26-02-2018 09-03-2018
(26-02-2018 – 09/03/2018)

“Education is not preparation for life,


education is life itself.”

- John Dewey

www.nitttrkol.ac.in NITTTR, Kolkata 63


STTP SCHEDULE 2017 - 2018

Dr. Indrajit Saha


List of Short-Term Training Programme
Phone: 91 (033) 66251930 /66251919 (Extn: 930)
Email:Indra.raju@gmail.com /indrajit@nitttrkol.ac.in SL. Prog. Programme Title Date
No Code From To
1. CU16 Webpage Design using PHP and 15-05-2017 19-05-2017
MySQL
2. CU34 Image Processing using MATLAB 19-06-2017 30-06-2017
3. CU50 Exposure on Multimedia Tools for 17-07-2017 28-07-2017
Dr. Indrajit Saha is a faculty member in the department of Computer Science & Enginering, Interactive Presentation
NITTTR, Kolkata. He did his postdoctoral research work at the National Research Council, 4. CU82 MATLAB for Data Analytics 18-09-2017 22-09-2017
Italy and University of Wroclaw, Poland. He was the visiting research scientist at CWI, 5. GUW12 Machine Learning and It’s 23-10-2017 27-10-2017
Netherlands, INRIA France, IIT-CNR, Italy, ICM in University of Warsaw (UW), Poland. He Applications
received his Ph.D. Degrees in Computer Science and Engineering from Jadavpur University 6. CU117 Research Methodology in 18-12-2017 29-12-2017
and Bioinformatics from Polish Academy of Sciences after completing M.Tech in Computer Engineering and Technical Writing
Science & Engineering from University of Kalyani. He has co-authored about 50 research using LaTeX
7. CU128 Introduction to Computational 22-01-2018 02-02-2018
papers in various International Journals and Conferences. Dr. Saha is an active member of
Intelligence
the board of reviewers for more than 30 International Journals. His research interest
8. BBSR26 Cyber Security 26-02-2018 02-03-2018
includes Education Technology, Multimedia Systems and Applications, Computational
Intelligence, Computational Biology, Machine Learning, Image Processing and Pattern
Recognition.

“The roots of education are bitter, but the


fruit is sweet.”
- Aristotle

64 NITTTR, Kolkata www.nitttrkol.ac.in


STTP SCHEDULE 2017 - 2018

Dr. Jagat Jyoti Mandal List of Short-Term Training Programme


Phone: 91 (033) 66251920 (D)/ 66251919 (Extn: 920) SL. Prog. Programme Title Date
Email: jjm_civil03@yahoo.co.in/ jjmandal@nitttrkol.ac.in No Code From To
1. CU01 Testing of Cement, Aggregates and 03-04-2017 07-04-2017
Concrete (inclusive of demonstration
of NDT)– Module – I
2. CU06 Testing of cement, aggregates and 24-04-2017 28-04-2017
Concrete (inclusive of demonstration
Dr. Jagat Jyoti Mandal is attached to the Department of Civil Engineering of National of NDT) – Module II
Institute of Technical Teachers’ Training and Research (NITTTR), Kolkata, as a faculty 3. CU14 Finite Element Method in Engineering 15-05-2017 26-05-2017
member since 2008. After graduating with Honours in Civil Engineering from IIT Kharagpur, 4. CU28 Testing of Pavement Materials 12-06-2017 16-06-2017
he obtained his M.Tech in Civil Engineering (with Specialization in Soil Mechanics and 5. CU47 Total Station Survey and Introduction 17-07-2017 21-07-2017
Foundation Engineering) and Ph.D in Civil Engineering from IIT Kharagpur. He has taught to GPS
various subjects of Civil Engineering at Graduate and Post-Graduate level at various 6. CU66 Geotechnical Investigation and 21-08-2017 25-08-2017
institutes for the past 30 years. He has around sixteen articles in International and National Testing (inclusive of various lab and
field tests on soil) – Module I
journals and conference proceedings. His areas of interest include Numerical Geo-
7. CU75 Geotechnical Investigation and 11-09-2017 15-09-2017
technique, Soil and Structural Dynamics and their applications in Earth quake Engineering, Testing (inclusive of various lab and
Ground Improvement Techniques. He has conducted Short Term Training Programmes on field tests on soil) – Module II
various topics including Geotechnical Investigation and Testing, Analysis and Design of 8. CU87 Testing & Characterisation of building 09-10-2017 20-10-2017
Foundations, Ground Improvement Techniques, Testing of Civil Engineering Materials, materials [bricks, water, cement,
Introductory Courses on Applications of FEM in Civil Engineering, Introductory courses on aggregates, steel & concrete ]
Soil and Structural dynamics, Design of Reinforced Concrete structural Elements, Surveying 9. GUW13 Fundamental Concepts of 06-11-2017 10-11-2017
by Total Station and so on. Geotechnical Engineering
10. BBSR19 Analysis and Design of Foundation 11-12-2017 15-12-2017
Systems
11. CU118 Application of Soft tools in 01-01-2018 12-01-2018
Engineering
12. CU132 Refresher Course in Engineering 05-02-2018 16-02-2018
Mechanics & Strength of Material
13. ICT14 Review Course on Soil Mechanics 12-03-2018 16-03-2018

“Education’s purpose is to replace an empty


mind with an open one.”
- Malcolm S. Forbes
www.nitttrkol.ac.in NITTTR, Kolkata 65
STTP SCHEDULE 2017 - 2018

Dr. Kinsuk Giri


Phone : +91-33 66251994 (D) / 66251919 (Extn : 994) List of Short-Term Training Programme

Email : kinsuk84@gmail.com / kinsuk@nitttrkol.ac.in SL. Prog. Programme Title Date


No Code From To
1. CU07 Uses of Computational and 24-04-2017 28-04-2017
Visualization Software in
Mathematics
2. CU35 Exposure on SCILAB 19-06-2017 30-06-2017
3. CU53 Theory and Applications of 24-07-2017 28-07-2017
Dr. Kinsuk Giri is an Assistant Professor in the Department of Computer Science and Engineering,
Optimization with SCILAB
NITTTR, Kolkata. His main research area is Numerical Simulations, Computational Astrophysics
4. CU77 Numerical and Statistical 11-09-2017 15-09-2017
which includes Hydrodynamics, Accretion and Outflows around compact objects, Shocks in Methods for Technical Teachers
Accretion, Viscous Flows, Two Component Accretion Flow (TCAF), Magneto Hydrodynamics, etc. with SCILAB
He received both his graduation and post graduation in Mathematics from Visva-harati Central 5. CU93 Mathematics and Computations 23-10-2017 03-11-2017
University and was awarded NET-JRF and LS in Mathematical Sciences in 2008/2007 by CSIR- 6. BBSR14 Topics in Discrete Mathematics 06-11-2017 10-11-2017
UGC. Dr. Giri was awarded Ph.D. (Science) in 2013 in Numerical and Computational Astrophysics, 7. CU116 Research Methodology in 18-12-2017 29-12-2017
with an emphasis on computational fluid dynamics and accretion flows in astrophysics from S. N. Engineering and Technical
Bose National Centre for Basic Sciences, India (Degree awarded by Jadavpur University, Kolkata). Writing using LaTeX
Subsequently he joined as a MOST Postdoctoral Fellow at National Tsing Hua University, Taiwan. 8. CU130 Discrete Mathematics and Its 05-02-2018 09-02-2018
Applications
After completing his two years postdoc tenure, he joined at NITTTR, Kolkata as an Assistant
9. GUW22 Topics in Discrete Mathematics 12-03-2018 16-03-2018
Professor on September, 2015.

The work developed in his Ph.D thesis addresses very important and relevant issues of accretion
processes around black holes. His thesis received the ''Outstanding Ph.D Thesis Award'' by
Springer-Verlag, Berlin and was published as a Book in 2014. During his research and academic
career, he delivered few invited lectures and several contributed talks within India as well as
abroad during his academic visits to various countries, e.g., Italy, Sweden, Russia, Japan, France,
Taiwan, China, Turkey, Nepal etc. He is in the editorial and reviewer board of few international
and national journals.

“A true education is an ornament in times of prosperity


and it is a refuge in times of adversity.”

- Aristotle
66 NITTTR, Kolkata www.nitttrkol.ac.in
STTP SCHEDULE 2017 - 2018

Mrs. Mithu Dey List of Short-Term Training Programme


Phone: 91 (033) 66251964 (D)/ 66251919 (Extn: 964)
Email: mithudey2007@rediffmail.com/mdey@nitttrkol.ac.in SL. Prog. Programme Title Date
No Code From To
1. CU39 Limit State Design of Steel 03-07-2017 07-07-2017
Structures
2. CU58 Laboratory Practice on Concrete 07-08-2017 11-08-2017
Mrs. Mithu Dey is a faculty member in the Department of Civil Engineering and her present and Demonstration of NDT
research area include Numerical analysis, FRP composite plate, Software Application in 3. CU76 Laboratory Practice on Civil 11-09-2017 15-09-2017
Structural Engineering etc. She graduated from Jadavpur University and completed M. Tech. Engineering Materials (Bricks,
degree from BESU in the field of Structural Engineering. Aggregates, Cement & Concrete)
She served this Institute for more than six years teaching in this institute. She has taught 4. CU93 Mathematics and Computations 23-10-2017 03-11-2017
various topics of Civil Engineering at Graduate and Post-Graduate level. She has conducted 5. ICT07 Organizational Behaviour 13-11-2017 17-11-2017
Short Term Training Programmes on various topics including Design of Steel Structures using 6. CU108 Introduction to IS 800-2007 11-12-2017 15-12-2017
latest code(IS 800-2007), advanced Structural analysis, Drawing using software, Lab oriented 7. CU133 Application of Auto CAD in 12-02-2018 16-02-2018
programme and so on. Engineering and basic Sciences
8. CU141 Drawing, Analysis and Design of 26-03-2018 30-03-2017
structures by Limit State Method
using software.

“The aim of education is the knowledge not


the facts but of values.”
- William Ralph Inge

www.nitttrkol.ac.in NITTTR, Kolkata 67


STTP SCHEDULE 2017 - 2018

Shri Nirmal Kumar Mandal


Phone: 91 (033) 66251973 (D)/ 66251919 (Extn: 973) List of Short-Term Training Programme
Email: mandal_nirmal@yahoo.com/nkmandal@nitttrkol.ac.in
Sl. Prog. Programme Title Date
No Code From To
1. CU04 AUTOCAD 17-04-2017 21-04-2017
2. CU13 Programming and Operations on CNC 15-05-2017 19-05-2017
Machines
Shri Nirmal Kumar Mandal is a member of faculty in the Dept. of Mechanical Engineering and 3. CU30 Computer Numerical Controlled 12-06-2017 16-06-2017
his present areas of interest include Computer Graphics, CAD/CAM, CNC Machines, FEM, and Machines: Constructional Features
Mechanical Vibrations etc.. He had graduated from Bengal Engineering College (now IIEST) and and Programming
received his post graduate degree in the area of Production Engineering from the Jadavpur 4. CU57 Fundamentals of Manufacturing 31-07-2017 04-08-2017
University. System
Since his joining at NITTTR, Kolkata in October 1994, he offered several STTPs in the areas of 5. CU78 Computer Aided Design with Ansys 11-09-2017 15-09-2017
Computer Graphics, Automated Manufacturing System, Automation, FEM, CAD/CAM and it’s 6. CU91 Experimentation and Experimental 23-10-2017 27-10-2017
allied areas. He has also served the Institute with several administrative responsibilities like Data Analysis
7. CU99 CAD/CAM 06-11-2017 10-11-2017
Senior Administrative Officer, member, Board of Governors etc.
8. CU117 Computations and Optimization in 18-12-2017 29-12-2017
He has about 20 publications in various National and International journals and conferences.
Engineering with MATLAB
9. CU126 Modelling of Engineering Systems 08-01-2018 19-01-2018
10. BBSR22 Developments of Laboratory 15-01-2018 19-01-2018
Instructions
11. ICT11 Automated Manufacturing Systems 05-02-2018 09-02-2018

“Education is a progressive discovery of


our ignorance.”
- Richard Cecil

68 NITTTR, Kolkata www.nitttrkol.ac.in


STTP SCHEDULE 2017 - 2018

Dr. Prasanta Sarkar


Phone: 91 (033) 66251937 (D)/ 66251919 (Extn: 937) List of Short-Term Training Programme
Email: sarkarprasant@gmail.com/ psarkar@nitttrkol.ac.in
SL. Prog. Programme Title Date
No Code From To
1. BBSR01 Control Systems Analysis & Design 03-04-2017 07-04-2017
using MATLAB
2. GUW02 Control Systems Analysis & Design 24-04-2017 28-04-2017
Dr. Prasanta Sarkar is a faculty member in the Department of Electrical Engineering since 2005. using MATLAB
He received B.Sc degree from Calcutta University in 1978, Graduate degree in Electrical 3. CU12 Power System Protection and 08-05-2017 12-05-2017
Safety
Engineering from The Institution of Engineers (India) in 1985, ME degree in Electrical Engineering
4. CU59 Electrical Safety & Code of 07-08-2017 11-08-2017
from Allahabad University in 1991 and Ph.D. degree in Electrical Engineering from Indian Institute Practices
of Technology, Kharagpur, in 2001. 5. CU79 Control Systems Analysis & Design 11-09-2017 22-09-2017
using MATLAB
From 1982 to 1992, he served Northern Railway, Allahabad as Electrical supervisor and from 1992 6. CU103 Laboratory Experiment on 13-11-2017 17-11-2017
to 2005 as faculty in North Eastern Regional Institute of Science and Technology, Nirjuli, Arunachal Electrical Machine and Power
Pradesh. He has about 34 years of working experience in academics and Industry in the field of System
Electrical Engineering. His present areas of interest include Control Systems, System Identification, 7. CU106 Application of MATLAB in 04-12-2017 08-12-2017
Model Order Reduction and Intelligent Control. He is a life member of Indian Society for Technical Engineering
Education, System Society of India and member, The Institution of Engineers (India) and Institute 8. CU112 Active Network 18-12-2017 22-12-2017
9. GUW18 Advanced Control System with 15-01-2018 19-01-2018
of Electrical and Electronics Engineers.
MATLAB Simulation
10. BBSR23 Advanced Control System with 29-01-2018 02-02-2018
MATLAB Simulation

“Education is training the mind and not


stuffing the brain.”
- Swami Ranganathananda

www.nitttrkol.ac.in NITTTR, Kolkata 69


STTP SCHEDULE 2017 - 2018

Shri Rajeev Chatterjee


Phone: 91 (033) 66251909 (D) / 66251919 (Extn: 909)
Email: chatterjee.rajeev@gmail.com/rajeev@nitttrkol.ac.in List of Short-Term Training Programme

SL. Prog. Programme Title Date


No Code From To
1. CU02 Design and Development of e-learning 10-04-2017 21-04-2017
Shri Rajeev Chatterjee is working as a faculty member in the Dept. of Computer Science & Systems
Engineering of National Institute of Technical Teachers’ Training and Research, Kolkata, since 2. CU19 Coding Theory and Application 22-05-2017 26-05-2017
January 2001. Previously he was working as a Lecturer in an Engineering College. He obtained 3. CU26 Networking Principles Management 05-06-2017 16-06-2017
his Bachelor’s Degree in Engineering from Karnataka University, Dharwad in the field of and Administration
Computer Science. He obtained his Master of Technology degree in Multimedia and Software 4. GUW05 Introduction to Coding Theory 03-07-2017 07-07-2017
Systems from West Bengal University of Technology, Kolkata. He has more than 15 years of 5. CU62 IP Networking 07-08-2017 18-08-2017
teaching experience at Graduate and Post-Graduate levels. He has around seven articles in 6. CU85 Advance Programming in C 09-10-2017 13-10-2017
International and National conference proceedings. 7. BBSR24 Introduction to Coding Theory 05-02-2018 09-02-2018
Rajeev Chatterjee has conducted a number of Training Programmes for the teachers of various 8. CU139 Teaching – Learning of Computer 19-03-2018 23-03-2018
Science in Indian Context
institutes including Polytechnics, Engineering Colleges, NITs and Universities in the area of
Fundamentals of Computer Systems, Computer Networking, Mobile and Personal Area
Networking, Programming in C/C++, e-Learning and related areas. He has also conducted
teachers training for Vocational Education System. His areas of interest include IP based
Networks, Design and Development of IT Infrastructure, e-Learning, Confidence Based
Learning, Human Computer Interaction, ICT in Education, IT and ITES in Vocational Education
System. He is also a member of National Syllabus Committee of NEILET in the area of
Multimedia.

“Education is the Kindling of a Flame, not the


filling of a vessel.”
- Socrates

70 NITTTR, Kolkata www.nitttrkol.ac.in


STTP SCHEDULE 2017 - 2018

Dr. Ranjan Dasgupta List of Short-Term Training Programme


Phone: 91 (033) 66251954 (D)/ 66251919 (Extn: 954)
SL. Prog. Programme Title Date
Email: ranjandasgupta@hotmail.com/ranjandasgupta@nitttrkol.ac.in
No Code From To
1. CU20 Database Design Theory and 29-05-2017 02-06-2017
Practice
2. CU40 Software Engineering 03-07-2017 14-07-2017
Dr. Dasgupta is a member of faculty in the Dept. of Computer Science & Engineering and his present
Fundamentals & Application
research area includes E-Learning, Software Engineering, Cloud Computing etc. He had graduated from Development
the University of Calcutta, India in Electronics and received his post graduate and doctoral degrees in 3. CU104 Design of Payroll Systems using 20-11-2017 01-12-2017
the area of Computer Science from the same University. ORACLE
Since his joining at NITTTR, Kolkata from Jadavpur University in 1993 he offered several STTPs in the 4. CU124 Introduction to DBMS 08-01-2018 19-01-2018
areas of DBMS, Software Engineering, C Programming and Networking. He had also served the Institute 5. CU136 Design and Development of 12-02-2018 23-02-2018
with several other responsibilities like Chairman, Purchase Committee, Chairman, Library Committee, MOOC based e-content
member, Board of Governors etc. At present he has the responsibility of the Secretary, Academic Council. 6. CU142 Topics on Computer 26-03-2018 30-03-2018
He is also connected with several other external academic bodies like AICTE, NBA. Architecture & Organization
He had more than 50 publications in various conferences and journals and is a member of IEEE Computer (Theoretical Discussion)
Society.

“Education has to produce the perfect man – sound in


character, active in mind and strong in body.”
- Plato

www.nitttrkol.ac.in NITTTR, Kolkata 71


STTP SCHEDULE 2017 - 2018

List of Short-Term Training Programme

Dr. Rayapati Subbarao SL. Prog. Programme Title Date


Phone: 91 (033) 66251974 (D)/ 66251919 (Extn: 974) No Code From To
Email: rssubbarao@hotmail.com/rsrao@nitttrkol.ac.in 1. CU05 Basics of Thermal Engineering 17-04-2017 21-04-2017
(Thermal Engineering – I)
2. CU36 How to write Thesis or 26-06-2017 30-06-2017
Research Paper
3. CU49 Engineering Thermodynamics 17-07-2017 21-07-2017
Dr. Rayapati Subbarao is a faculty member in Mechanical Engineering Department at NITTTR Kolkata. He and its Applications
obtained his doctoral degree from IIT Madras and M.Tech from IIT Delhi. Dr. Subbarao has more than 13 4. CU61 Thermal Engineering Systems 07-08-2017 11-08-2017
years of experience in Teaching, Research & Development and Training. His previous employers include 5. CU73 Developments in Power Plants 04-09-2017 08-09-2017
IIT Delhi, VIT University, Vellore, BIT and KL University, Vijayawada. He has 52+ publications in reputed and Alternative Fuels
International Journals and Conferences. Apart from Teaching and R&D, he has also been involved in 6. ICT05 Engineering Thermodynamics 09-10-2017 13-10-2017
participating/organizing workshops/conferences/STTPs, installation of labs and preparation of course 7. CU100 Thermal Sciences Lab 06-11-2017 10-11-2017
materials/lab handouts. He is recipient of National and State Merit Scholarships. He is a Member of 8. BBSR17 Engineering Thermodynamics 27-11-2017 01-12-2017
Institution of Engineers (India) (MIE) and ASME. Also, he is a life member of Indian Society of Heat and 9. GUW17 How to write Thesis or 08-01-2018 12-01-2018
Mass Transfer (ISHMT), Fluid Mechanics and Fluid Power (FMFP), Combustion Institute (India) and Indian Research paper
Society of Technical Education (ISTE). He has been a reviewer of projects/publications at various levels for
10. CU131 Thesis Writing 05-02-2018 09-02-2018
the last few years. Reviewer for International Journal of Turbo & Jet Engines, Proceedings of the Instn of
11. CU138 Applied Thermodynamics 01-05-2017 05-05-2017
Mech Engrs, Part A: Journal of Power and Energy, Journal of Mechanical Engineering and Sciences (JMES)
(Thermal Engineering – II)
and Science China Technological Sciences. Also, he has been the reviewer for reputed conferences like
ASME GT India and FMFP. He is also involved in setting question papers for UG and PG course in other
Universities/autonomous colleges. He was involved in works like EU-Asialink program, ABET, USA and NBA
accreditations. Earlier, he had worked USA and visited Korea for presenting a paper on Counter Rotating
Turbines. His areas of research are Turbomachinery, CFD of Turbomachinery, Counter Rotating Turbines,
Axial Flow Turbines, Combined cycle power plants, SOFC-GT, Alternative fuels, Steam and gas turbines. He
wishes to guide interested faculty/scholars for their Ph.D.

“Educating the mind without educating the


heart is no education at all.”
- Aristotle

72 NITTTR, Kolkata www.nitttrkol.ac.in


STTP SCHEDULE 2017 - 2018

Dr. Sagarika Pal List of Short-Term Training Programme


Phone: 91 (033) 66251938 (D) / 66251919 (Extn: 938 )
Email: spal922@yahoo.co.in/sagarikapal@nitttrkol.ac.in SL. Prog. Programme Title Date
No Code From To
1. CU08 Laboratory Experiment and Students’ 24-04-2017 28-04-2017
Project
2. GUW04 MATLAB Application in Engineering 29-05-2017 02-06-2017
Dr. Sagarika Pal is a faculty member in the Department of Electrical Engineering and his present 3. CU24 Modelling & Simulation of 05-06-2017 09-06-2017
research area includes Sensors, Measurement, Process Control and Mechatronics. She graduated Mechatronics System
in Instrumentation Engineering and received her post graduate degree with specialization in 4. CU33 Hands on Practice on PLC 12-06-2017 23-06-2017
Measurement and Instrumentation from the University of Calcutta. She was awarded doctoral Programming and Applications
degree in the area of Robotics from Jadavpur University, Kolkata. 5. CU55 Measurement and Design of Signal 24-07-2017 28-07-2017
Conditioning Circuits
Since joining at the Institute Dr. Pal has offered several Short Term Training Programmes (STTP)
6. CU70 Application of MATLAB Control 21-08-2017 01-09-2017
in the areas of Sensors and Transducers, Measurement, Advanced Process Control, PLC and System, Image Processing and Fuzzy
Automation, Mechatronics, MATLAB and its Application in Engineering etc. She has published more Logic Tool Box
than 40 papers in various National, International Journals and Conference Proceedings and is a 7. BBSR12 Application of MATLAB, Control 09-10-2017 13-10-2017
life member of Institution of Engineers (India) and Forum of Scientists, Engineers and System, Image Processing and Fuzzy
Technologists (FOSET). At present, she is involved in various Institutional activities apart from Logic Tool box
teaching. 8. CU96 Industrial automation using PLC, DCS 06-11-2017 10-11-2017
& SCADA
9. CU109 Preparation of Laboratory Manual for 11-12-2017 15-12-2017
Electrical, Electronics and
Instrumentation Engineering
10. CU121 LABVIEW & MATLAB Applications in 08-01-2018 12-01-2018
Engineering
11. ICT13 Control & Automation 05-03-2018 09-03-2018

“To succeed in your mission you must have


single minded devotion to your goal.”

- Dr. A. P. J. Abdul Kalam

www.nitttrkol.ac.in NITTTR, Kolkata 73


STTP SCHEDULE 2017 - 2018
List of Short-Term Training Programme
Dr. Sailendra Nath Mandal SL. Prog. Programme Title Date
Phone: 91 (033) 66251908 (D)/ 66251919 (Extn: 908) No Code From To
Email: drsailen@hotmail.com/snmandal@nitttrkol.ac.in 1. CU15 Water for Drinking and Impact on Public Health 15-05-2017 26-05-2017
2. CU21 Analysis of Bottled Water and Health 05-06-2017 16-06-2017
3. CU42 Polytechnic Chemistry Laboratory Practices 10-07-2017 14-07-2017
4. GUW06 Air, Water Quality and Health 24-07-2017 28-07-2017
5. ICT01 Environmental Pollution and Impact on Public 07-08-2017 11-08-2017
Health
Dr. Sailendra Nath Mandal is a faculty member in the Department of Civil Engineering
6. CU71 Instrumental Techniques of Air and Water quality 28-08-2017 08-09-2017
and his present research area includes Environmental Science & Engineering. He Analysis
graduated from the University of Calcutta, India in Chemical Engineering and received 7. CU80 Modernization of Chemistry and Environmental 18-09-2017 22-09-2017
his post graduate and doctoral degrees in the area of Chemical Engineering from the Pollution Testing Laboratory
same University. Since joining at the Institute from University of Calcutta in 1997, Dr. 8. CU92 Solid Waste and Wastewater Treatment 23-10-2017 03-11-2017
Mandal has offered several STTPs in the areas of Drinking Water Quality, Ambient Air 9. BBSR15 Testing Drinking Water for Domestic Use 13-11-2017 17-11-2017
Quality, Wastewater Treatment, Solid Waste Management, Applied Chemistry, 10. CU107 Operation and maintenance of different Water, Air 04-12-2017 15-12-2017
Environmental Science & Engineering etc. He has published more than 75 papers in and Petrochemical Testing Equipment
various conferences and journals and is member IIChE, ISEC, ICCE, MIEE, FOSET. At
present, he is the Faculty –in-Charge of Accounts. Beside this, he is also a member of
other academic bodies like AICTE.

“He who opens a school door, closes a


prison.”
- Victor Hugo

74 NITTTR, Kolkata www.nitttrkol.ac.in


STTP SCHEDULE 2017 - 2018

Dr. Samir Roy List of Short-Term Training Programme


Phone: 91 (033) 66251988 (D) / 66251919 (Extn: 988)
SL. Prog. Programme Title Date
Email: samir.cst@gmail.com /sroy@nitttrkol.ac.in
No Code From To
1. CU10 Mathematical Logic 01-05-2017 05-05-2017
2. CU45 Design and Analysis of Algorithms 10-07-2017 21-07-2017
3. CU67 Formal Languages and Automata 21-08-2017 25-08-2017
4. CU94 Mathematics and Computations 23-10-2017 03-11-2017
Dr. Samir Roy is attached to the Dept. of Computer Science & Engineering of National Institute 5. CU101 Object Oriented Software Design 13-11-2017 17-11-2017
of Technical Teachers’ Training and Research (NITTTR), Kolkata, as a faculty member since 6. CU128 Introduction to Computational 22-01-2018 02-02-2018
2005. After graduating with Honours in Physics from the Presidency College, Kolkata, he Intelligence
obtained his B.Tech, M.E and Ph.D degrees, all in the field of Computer Science & Engineering. 7. CU139 Teaching – Learning of Computer 19-03-2018 23-03-2018
He has taught various topics of Computer Science at Graduate and Post-Graduate level at Science in Indian Context
various institutes for the past 23 years. He has around fifty articles in International and
National journals and conference proceedings. He has authored a text book entitled
Introduction to Soft Computing: Neuro-Fuzzy and Genetic Algorithms with a co-author which
has been published by Pearson. His areas of interest include Educational Informatics, Artificial
Intelligence, Soft Computing, Theory of Computation. He has conducted Short Term Training
Programmes on various topics including Artificial Intelligence, Formal Languages & Automata,
Design and Analysis of Algorithms, Object Oriented Software Design, Unified Modeling
Language, Data Structures, Computer Aided Technical Presentation and so on.

“The highest education is that which does not


merely give us information but makes our life
in harmony with all existence.”
- Rabindra Nath Tagore

www.nitttrkol.ac.in NITTTR, Kolkata 75


STTP SCHEDULE 2017 - 2018

List of Short-Term Training Programme


Dr. Samiran Mandal
Phone: 91 (033) 66251982 (D)/ 66251919 (Extn: 982) SL. Prog. Programme Title Date
Email: samiran_m04@yahoo.com/ No Code From To
samiran.mandal@nitttrkol.ac.in 1. CU09 Introduction to Robotics 24-04-2017 28-04-2017
2. CU25 Development of Mechanical 05-06-2017 09-06-2017
Engineering Laboratory
Experiments
Dr. Samiran Mandal is a faculty member in the Department of Mechanical Engineering and 3. MGT02 Research Methodology in 03-07-2017 07-07-2017
Technical Education
his present research area includes Robotics, Machining Science, Powder Metallurgy. He
4. CU67 Teaching of Theory of Machines 14-08-2017 18-08-2017
graduated from the University of Burdwan, in Mechanical Engineering and had his post and Mechanism
graduate degree in the area of Mechanical Engineering from IIT Kharagpur. 5. GUW11 Gradation of Students 16-10-2017 20-10-2017
After completion of M. Tech, he worked in Telco Jamshedpur as design engineer. He did Performance
his Ph. D from I.I.T Kanpur, and joined NITTTR, Kolkata in 1994. Dr. Mandal has offered 6. CU94 Development of Laboratory 30-10-2017 03-11-2017
several STTPs in the areas of Robotics, Automobile Engineering, Welding Processes, Instruction Sheet for Metrology
Product Design, Fabrication Techniques, Metrology and Measurement. He has published 7. CU129 Mechanical Measurement and 29-01-2018 02-02-2018
number of papers in various National Journals and Proceedings and was a member of IEEE. Control
Beside this, he is also a member of the external academic body of IIEST. 8. BBSR27 Teaching of Engineering 05-03-2018 09-03-2018
Mechanics
9. CU140 Automobile Engineering 19-03-2018 23-03-2018

“Education has for its object the


formation of character.”
- Herbert Spencer

76 NITTTR, Kolkata www.nitttrkol.ac.in


STTP SCHEDULE 2017 - 2018
List of Short-Term Training Programme

Dr. Santanu Bhanja SL. Prog. Programme Title Date


No Code From To
Phone: 91 (033) 66251923 (D) / 66251919 1. BBSR03 Introduction to ETABS Structural Analysis 01-05-2017 05-05-2017
(Extn: 923) and Design Software for Buildings
Email: san244in@yahoo.com/ 2. CU29 Application of Revised Codes IS 1893-Part 1 : 12-06-2017 23-06-2017
sbhanja@nitttrkol.ac.in 2016 and IS 13920 :2016 in Earthquake
Resistant Design of Buildings
3. CU48 Refresher Course on Structural Analysis and 17-07-2017 21-07-2017
Dr. Santanu Bhanja is a faculty member in the Department of Civil Engineering and Design using STAAD Software
his present research area includes High Performance Concrete, Reinforced Concrete 4. ICT03 Static and Dynamic Analysis of Seismic 11-09-2017 15-09-2017
Design, Earthquake Resistant Design, Software Application in Structural Engineering Resistant RCC Buildings
etc. He graduated with Honours from Jadavpur University, completed M Tech from 5. CU81 Advanced Course on Structural Analysis and 18-09-2017 22-09-2017
Design Software STAAD.Pro
IIT, Kharagpur and Ph.D from Jadavpur University in the field of Structural
6. CU84 Introduction to ETABS Structural Analysis 09-10-2017 13-10-2017
Engineering.
and Design Software for Buildings
He served the industry for seven years both in the private and Government sectors
7. CU89 Fundamentals of Limit State Method of 23-10-2017 27-10-2017
before joining the Civil Engineering Department of the Bengal Engineering College Design of RC Structures with Special
(Deemed University) in 1996 where he served about a decade before taking up the Emphasis on Load and Capacity design
present assignment. He has guided several students at Master Degree level and one 8. CU111 Surveying by Total Station with an 18-12-2017 22-12-2017
student has been awarded Ph.D degree in 2013 under his guidance. He has introduction to Digital Geographical
successfully completed a Research Project sponsored by the Fly Ash Unit of DST, Govt. Positioning System
of India in 2012. He has published number of papers in reputed Journals like Cement 9. CU120 Repair and Rehabilitation of Structures 08-01-2018 12-01-2018
and Concrete Research, ACI Materials Journal, Indian Concrete Journal, Journal of the 10. BBSR25 Application of Revised Code IS 1893-Part 1 : 19-02-2018 23-02-2018
Institution of Engineers etc. and contributed a number of technical papers in National 2016 in Earthquake Resistant Design of
and International Seminars and Conferences. He has chaired technical sessions in Buildings
International Conferences. He as acted as a key technical speakers in a number of
Seminars/ Engineers’ Meets/Skill and Technology transfer programmes organized by
reputed cement manufacturers and in an awareness programme on Earthquakes aired
live by DD Bangla.

“All knowledge that the world has ever received


comes from the mind, the infinite library of the
universe is in our own mind.”
- Swami Vivekananda
www.nitttrkol.ac.in NITTTR, Kolkata 77
STTP SCHEDULE 2017 - 2018

Dr. Sekhar Chakraborty


Phone: 91 (033) 66251959 (D)/ 66251919 (Extn: 959)
Email: sekhar_nitttr@yahoo.com/schakraborty@nitttrkol.ac.in List of Short-Term Training Programme
Mobile No: 9432357398 SL. Prog. Programme Title Date
No Code From To
1. GUW01 Developing Entrepreneurship 17-04-2017 21-04-2017
among students-role of polytechnic
Dr. Sekhar Chakraborty is a faculty member in Department of Education and Management, teachers
NITTTR, Kolkata. A Chemical Engineer from Jadavpur University, he served for a long time in the 2. PS03 Development and Implementation 22-05-2017 26-05-2017
of Staff training Programme for
industry and in the Technical Education Department of the state of West Bengal as a Deputy
Polytechnic Teachers
Director before joining this institute in 1996. Shri Chakraborty obtained his masters and doctoral
3. PS05 Developing Entrepreneurship 12-06-2017 16-06-2017
degrees in Chemical Engineering from the same University. Among Students-Role of Polytechnic
Since his joining this institute he has had developed several need based faculty training Teachers
programmes covering a wide area of the technical education system. Of late Prof. Chakraborty 4. BBSR09 Quality Improvement in institutional 14-08-2017 18-08-2017
has been focusing on a wide variety of identified areas for training purposes covering quality & activities
environmental management, institutional development, occupational health & safety, media 5. PS11 Quality Improvement in Institutional 04-09-2017 15-09-2017
application in teaching-learning system, making effective presentation, soft-skills development, activities
teachers role in entrepreneurship development among students etc. He has also developed a 6. PS15 Making Effective Presentations 13-11-2017 17-11-2017
unique training program on development of a human resource training function. [practice based training]
Prof. Chakraborty has substantial research experience in the field of technical education system. 7. GUW23 Making Effective Presentations 19-03-2018 23-03-2018
[practice based training]
In addition, Prof. Chakraborty is the Faculty-in-Charge of LRC and till date, has made several
educational video films. Besides being an acknowledged trainer Dr. Chaktraborty has sixteen
publications to his credit.

“Education is the movement from


darkness to light.”
- Allan Bloom
78 NITTTR, Kolkata www.nitttrkol.ac.in
STTP SCHEDULE 2017 - 2018

Mrs. Sheela Yadav Rai


Phone: 91 (033) 66251997 (D)/ 66251919 (Extn: 997)
List of Short-Term Training Programme
Email: sheelayadavrai2007@mail.com/
sheelayadavrai@nitttrkol.ac.in SL. Prog. Programme Title Date
No Code From To
1. CU44 Power Generation from Energy 10-07-2017 14-07-2017
Resources
Mrs. Sheela Yadav Rai is a faculty member in the Department of Electrical Engineering, 2. CU64 Renewable Energy Sources and 14-08-2017 18-08-2017
NITTTR Kolkata. She did her graduation Electrical & Electronics Engineering from Andhra Emerging Technologies
University, Visakhapatnam and Master of Engineering in Power System from Birla Institute 3. BBSR11 Power Generation from Energy 04-09-2017 08-09-2017
of Technology, Mesra, Ranchi. She has published papers in seminars/conferences. Her areas Resources
of interest are Rural development, Non-conventional Energy, Power System & Power 4. CU97 Estimating & Costing of Non- 06-11-2017 10-11-2017
Conventional Energies
Electronics.
5. GUW15 Estimating & Costing of Non- 20-11-2017 24-11-2017
She has taken active participation in developing various training packages on 'Textile,
Conventional Energies
Clothing & Footwear' during 2003-2005 under National Vocational Education Qualification 6. CU113 Renewable Energy Sources and 18-12-2017 22-12-2017
and Certification Framework (NVEQCF) programme of MHRD and various curricula on Emerging Technologies
'Organized Retail Sector' during 2009-2011 under National Skill Development Mission 7. CU127 Power System Protection 15-01-2018 19-01-2018
(NSDM) of MHRD, Government of India. 8. CU134 Power Generation from Energy 12-02-2018 16-02-2018
Resources
9. CU137 Power System Analysis 26-02-2018 02-03-2018
10. ICT16 Renewable Energy Sources and 26-03-2018 30-03-2018
Emerging Technologies

“A teacher who is attempting to teach without


inspiring the pupil is hammering on cold iron.”
- Horace Mann

www.nitttrkol.ac.in NITTTR, Kolkata 79


STTP SCHEDULE 2017 - 2018
List of Short-Term Training Programme

SL. Prog. Programme Title Date


Dr. Soumitra Kumar Mandal No Code From To
Phone: 91 (033) 66251970 (D)/ 66251919 (Extn: 970) 1. CU18 8051 Microcontroller & 8085 15-05-2017 26-05-2017
Microprocessor Based Projects
Email: mandal_soumitra@yahoo.com/skmandal@nitttrkol.ac.in
2. CU24 LABVIEW &VHDL Applications in 05-06-2017 09-06-2017
Engineering
3. CU37 PIC Microcontroller & 8086 26-06-2017 07-07-2017
Microprocessor, Architecture,
Programming & Interfacing
Dr. Soumitra Kumar Mandal is a faculty member in the Department of Electrical Engineering, 4. CU63 Power System Protection 14-08-2017 18-08-2017
National Institute of Technical Teachers’ Training and Research (NITTTR), Kolkata since 2004. He 5. GUW08 Laboratory & Workshop Manual 04-09-2017 08-09-2017
obtained B.E. degree in Electrical Engineering from Bengal Engineering College, Shibpur, Calcutta for Electrical, Electronic and
University and M.Tech in Electrical Engineering with specialization in Power Electronics from Instrumentation Engineering
Institute of Technology, Banaras Hindu University, Varanasi. He obtained Ph.D degree from Punjab 6. ICT04 Laboratory Instruction 18-09-2017 22-09-2017
University, Chandigarh. He has taught various subjects of Electrical Engineering at Undergraduate 7. CU88 PLC and its Applications 16-10-2017 20-10-2017
and Post Graduate level for the past 20 years. He has published about fifty papers in International 8. CU114 Laboratory & Workshop Manual 18-12-2017 22-12-2017
and National Journals and Conferences. His research interests are in the field of Computer Control for Electrical, Electronic and
Drives, Microprocessor and Microcontroller based system design, embedded system design and Instrumentation Engineering
9. CU122 Machines and Drives 08-01-2018 12-01-2018
Neuro-fuzzy computing.

“You have to dream before your dreams


come true.”

- Dr. A. P. J. Abdul Kalam

80 NITTTR, Kolkata www.nitttrkol.ac.in


STTP SCHEDULE 2017 - 2018

Dr. Subrata Chattopadhyay


Phone: (0674) 2300776
Email: subrata0507@gmail.com/schattopadhyay@nitttrkol.ac.in List of Short-Term Training Programme

SL. Prog. Programme Title Date


No Code From To
1. BBSR02 Induction Training 17-04-2017 21-04-2017
2. CU11 LabVIEW Architecture, 01-05-2017 05-05-2017
Dr. Subrata Chattopadhyay is a faculty member in Electrical Engineering Department and In – Programming and its applications
Charge of Extension Center, Bhubaneswar. He received his Ph. D (Tech) in Instrumentation in Measurement & Control
Engineering from the University of Calcutta, India in 2006, preceded by M. Tech [Instrumentation], 3. BBSR05 Research Methodology 12-06-2017 16-06-2017
4. BBSR08 Advanced Process Control & 07-08-2017 11-08-2017
B. Tech. [Electrical] and B. Sc in Physics, in 1993, 1991 and 1987 respectively.
Instrumentation System
He served as a Deputy Manager [Projects & Maintenance] in Electrical and Instrumentation
5. BBSR10 Theory and Operation of DC 21-08-2017 25-08-2017
Engineering of Chemical and Manufacturing Industries in India and then joined as an Assistant Machines & Transformers
Professor in Electrical Engineering Department at this Institute in 2003. At present he is working 6. CU87 PLC Architecture, Programming 09-10-2017 13-10-2017
as a Professor in Electrical Engineering and In-charge of NITTTR Kolkata Extension Centre, and its applications in
Bhubaneshwar. He introduced, as head of Electrical Engineering Department, a new Post Graduate Measurement & Control
Programme [M. Tech. in Mechatronics Engineering], the first of its kind in Eastern India at NITTTR 7. BBSR13 Laboratory Development 16-10-2017 20-10-2017
Kolkata, with required development of the Department to accommodate the same. He is highly 8. BBSR16 Theory, Operation and 20-11-2017 24-11-2017
involved in Teaching and Research and his present investigation is on innovation of noble Applications of Transducers &
techniques of measurement & control based on Sensor and Transducer development, Process Actuators in Industry
9. ICT10 Theory and Operations of 15-01-2018 19-01-2018
Automation, PLC and Distributed Control System, Mechatronics, Robotics etc. He has nearly 70
Sensors, Transducers &
publications in various International and National journals and conferences to his name. Actuators
10. GUW24 Advanced Process Control & 26-03-2018 30-03-2018
Instrumentation System

“If you can’t explain it simply, you don’t


understand it well enough.”

- Albert Einstein

www.nitttrkol.ac.in NITTTR, Kolkata 81


STTP SCHEDULE 2017 - 2018

Dr. Subrata Mondal List of Short-Term Training Programme


Phone: 91 (033) 66251917 (D)/ 66251919 (Extn: 917)
Email: subratamondal@yahoo.com/subratamondal@nitttrkol.ac.in SL. Prog. Programme Title Date
No Code From To
1. CU31 Polymer Composites and 12-06-2017 16-06-2017
Nanocomposites
2. MGT03 Laboratory Safety 03-07-2017 14-07-2017
Management
Dr. Subrata Mondal is an Assistant Professor, Department of Mechanical Engineering of National Institute 3. CU56 Membranes for Water 24-07-2017 28-07-2017
of Technical Teachers’ Training & Research (NITTTR), Salt Lake City, Kolkata, West Bengal, India. Prior Treatment: Challenges and
to this assignment, Dr. Mondal has worked at The Petroleum Institute, Abu Dhabi, United Arab Emirates. Opportunities
Earlier, he was employed with various universities such as National University of Singapore, Singapore; 4. CU69 Functional Textiles and 21-08-2017 25-08-2017
Colorado State University, USA; Monash University, Australia; and The University of Queensland, Protections
Australia. He got his doctoral degree in Polymer Science from The Hong Kong Polytechnic University, 5. GUW09 Waste Water Treatment: 11-09-2017 15-09-2017
Hong Kong SAR, M.Tech in Fiber Sc. & Tech. from the Indian Institute of Technology, Delhi and B.Tech. Pollution Control and Reuse
in Textile Technology from the University of Calcutta. Dr. Subrata Mondal has immense interest in the 6. CU119 Fundamentals and 01-01-2018 12-01-2018
Applications of
field of interdisciplinary research and teaching relating to polymeric biomaterial for soft tissue
Nanomaterials
engineering, novel membrane separation, polymer composite, nanocomposite and bio composite, smart 7. ICT12 Laboratory Safety 19-02-2018 23-02-2018
polymeric materials, functional textiles, and laboratory safety management. Management
As of now he has 42 referred international journal publications, 2 USA patents, 4 book chapters, 6 non- 8. BBSR28 Intelligent Textile Materials 12-03-2018 16-03-2018
referred journal papers and 18 conferences with citation over 1400, h-index 17 and i-10 index of 24.
Currently, Dr. Mondal is an editorial board member of International Journal of Chemical Engineering,
International Journal of Polymer Science, Journal of Membrane Science and Technology, Journal of
Chemistry, Journal of Chemical Engineering and Material Science, and International Journal of Membrane
Science and Technology. So far, he has reviewed over 150 manuscripts from over 75 different referred
journals. Based on his research performances, he has received several international awards. Dr. Mondal’s
researches have been featured in Australian Broadcasting Corporation (ABC) television channel,
Queensland Business Review and Australia’s Anthill (Australia’s largest online communities for
entrepreneurs). Dr. Mondal has also reviewed research proposal from USA-Israel BARD fund (www.bard-
isus.com).

“Live as if you were to die tomorrow, Learn


as if you were to live forever.”
- Mahatma Gandhi
82 NITTTR, Kolkata www.nitttrkol.ac.in
STTP SCHEDULE 2017 - 2018
List of Short-Term Training Programme
Shri Sukanta Kumar Naskar SL. Prog. Programme Title Date
Phone: 91 (033) 66251932(D) / 66251919 (Extn: 932) No Code From To
Email: sukanta_naskar@yahoo.com/sknaskar@nitttrkol.ac.in 1. MGT01 Strategic Management Issues in 01-05-2017 05-05-2017
Technical Education System
2. PS06 Problem Solving and Decision 19-06-2017 23-06-2017
Making
3. PS07 Essentials of Human Resource 10-07-2017 14-07-2017
Management
Shri Sukanta Kumar Naskar is a faculty in the department of Education and Management of National 4. BBSR07 Strategic Management 24-07-2017 28-07-2017
Institute of Technical Teachers Training and Research (NITTTR)-Kolkata since 2008. He joined 5. PS10 Effective Training 21-08-2017 25-08-2017
6. MGT05 Institutional Management 11-09-2017 15-09-2017
NITTTR-Kolkata in the year of 1997 as faculty member of Educational Planning and Management.
7. MGT06 Research Methodology in 23-10-2017 27-10-2017
He did his B.Tech. with honours from Jadavpur University and M.Tech from IIT-Kharagpur. He Management
taught subjects related to Production Engineering and Mechanical Engineering at undergraduate 8. ICT08 Effective Training 20-11-2017 24-11-2017
and post graduate levels. He is having experience in handling various education project related to 9. GUW16 Strategic Management 18-12-2017 22-12-2017
Technical Education System including World Bank Assisted Technician Education (Tech. Ed.) 10. GUW19 Approaches in Developing 29-01-2018 02-02-2018
Project. He has around twenty publications in national and international journals and conference Technical Curricula
proceedings. He also contributed as presenter in developing five Educational Video films. His areas 11. BBSR30 Approaches in Developing 26-03-2018 30-03-2018
of interest include Total Quality Management, Project Management, Human Resource Management, Technical Curriculum
Industrial Management and has conducted short term training programmes in the related fields.

“The function of education is to teach one to think


intensively and to think critically, intelligence plus
character – that is the goal of true education.”

- Martin Luther King, Jr.

www.nitttrkol.ac.in NITTTR, Kolkata 83


STTP SCHEDULE 2017 - 2018

List of Short-Term Training Programme

Dr. Tushar Kanti Dey SL. Prog. Programme Title Date


Phone: 91 (033) 66251921 (D)/ 66251919 No Code From To
1. CU03 Computer Aided Drafting and Software 17-04-2017 28-04-2017
(Extn: 921) Application in Science and Engineering
Email: tkdiitr@gmail.com / 2. CU14 Finite Element Method in Engineering 15-05-2017 26-05-2017
tkdey@nitttrkol.ac.in 3. PS02 Management of CDTP and PWD Scheme 22-05-2017 26-05-2017
4. CU28 Testing of Pavement Materials 12-06-2017 23-06-2017
5. CU47 Total Station Survey and Introduction to 17-07-2017 21-07-2017
Dr. Tushar Kanti Dey is a faculty member in the department of Civil Engineering, GPS
NITTTR, Kolkata. He obtained his doctoral degree from Indian Institute of 6. CU52 Disaster Management - an awareness 24-07-2017 28-07-2017
Technology, Roorkee after completing M. Tech from National Institute of programme for the Polytechnic and
Technology Durgapur. Dr. Dey has worked as a Junior Research Fellow in Indian Engineering college teachers
Institute of Technology Roorkee for almost 3 years. Earlier, he worked as Lecturer 7. CU88 Testing & Characterisation of building 09-10-2017 20-10-2017
at Thapar University, Patiala. He has 16 publications in reputed International materials [bricks, water, cement,
Journals and Conferences. Apart from Teaching and R&D, he has also been involved aggregates, steel & concrete ]
in workshops/conferences, installation of laboratory, preparation of course 8. GUW14 Application of Auto CAD in Engineering 13-11-2017 17-11-2017
Drawing
materials and laboratory handouts. He is a Member of Institution of Engineers
9. MGT06 Occupational Health and Safety Issues - an 20-11-2017 24.11.2017
(India) (MIE). He has been a reviewer of projects/publications at various levels for Awareness programme for the Polytechnic
the last few years. Recently, he has acted as a reviewer for book published by the and Engineering College Teachers
Journal of Bridge Engineering, ASCE. He is also involved in paper setting for UG 10. CU118 Application of Soft tools in Engineering 01-01-2018 12-01-2018
and PG for Punjab Technical Universities and other Universities/autonomous 11. BBSR21 Design of Concrete Mix 08-01-2018 12-01-2018
colleges. He has been actively involved in NBA, TIET and ABET accreditation works. 12. CU132 Refresher Course in Engineering Mechanics 05-02-2018 16-02-2018
& Strength of Material
13. ICT15 Various Schemes - Implementation through 19-03-2018 23-03-2018
Polytechnics

“Tell me and I forget. Teach me and I


remember. Involve me and I learn.”

- Bengamin Franklin
84 NITTTR, Kolkata www.nitttrkol.ac.in
STTP SCHEDULE 2017 - 2018
List of Short-Term Training Programme
Dr. Uday Chand Kumar
Phone: 91 (033) 66251998 (D)/ SL. Prog. Programme Title Date
No Code From To
66251919 (Extn: 998)
1. CU01 Testing of Cement, Aggregates and Concrete 03-04-2017 07-04-2017
Email: (inclusive of demonstration of NDT)– Module – I
udaychandkumar@gmail.com/uckum 2. CU06 Testing of cement, aggregates and Concrete 24-04-2017 28-04-2017
ar@nitttrkol.ac.in (inclusive of demonstration of NDT) – Module II
3. PS02 Management of CDTP and PWD Scheme 22-05-2017 26-05-2017
4. BBSR04 Management of CDTP and PWD Scheme 29-05-2017 02-06-2017
Dr. Uday Chand Kumar is a faculty member in the department of Civil 5. CU52 Disaster Management - an awareness programme 24-07-2017 28-07-2017
Engineering and his area of Interest is in Rural Development. for the Polytechnic and Engineering college
He graduated from the University of North Bengal in Civil Engineering teachers
and obtained his post graduate degree in the area of Civil Engineering 6. CU58 Laboratory Practice on Concrete and 07-08-2017 11-08-2017
Demonstration of NDT
from M.I.T. Muzaffarpur.
7. CU76 Laboratory Practice on Civil Engineering Materials 11-09-2017 15-09-2017
He worked in Ghosh & Ghosh as a Consultancy Officer, Architectural (Bricks, Aggregates, Cement & Concrete)
Design Cell, Cuttack and Bhattacharya & Associate then R.K. Mission 8. MGT06 Occupational Health and Safety Issues - an 20-11-2017 24.11.2017
Shilpamandir, Belur as Lecturer. He did his Ph. D from ISM, Dhanbad Awareness programme for the Polytechnic and
and he also completed Master Degree in Science (Ecology & Engineering College Teachers
Environment), Master of Arts (Rural Development). Dr. Kumar joined 9. BBSR20 Disaster Management - an Awareness Programme 18-12-2017 22-12-2017
NITTTR, Kolkata in 1994. for the Polytechnic and Engineering College
Dr. U. C. Kumar has offered several STTPs in the areas of Rural Teachers
Development, Disaster Management, Rural Water Supply and 10. CU120 Repair and Rehabilitation of Structures 08-01-2018 12-01-2018
Sanitation, West Management etc., He has published a number of 11. CU133 Application of Auto CAD in Engineering and basic 12-02-2018 16-02-2018
papers in various National & International Journals. Sciences
12. PS21 Panchayat Polytechnic Interaction in Rural 05-03-2018 10-03-2018
Development

“Education is not the learning of facts, but


the training of the mind to think.”
- Albert Einstein

www.nitttrkol.ac.in NITTTR, Kolkata 85


STTP SCHEDULE 2017 - 2018
List of Short-Term Training Programme
Dr. Urmila Kar
Phone: 91 (033) 66251931 (D) / 66251919 (Extn: 931) SL. Prog. Programme Title Date
No Code From To
Email: urmilakar@rediffmail.com/ 1. GUW03 Design of Outcome Based Curriculum 15-05-2017 19-05-2017
urmilakar@nitttrkol.ac.in 2. PS04 Refresher Course on Curriculum Design 22-05-2017 09-06-2017
approaches in Technical and Vocational
Education and Training (TVET)
Dr. Urmila Kar is a faculty member in the department of Education and Management of 3. BBSR06 Outcome Based Education and 19-06-2017 23-06-2017
Accreditation
NITTTR, Kolkata since 2008 and has more than 25 years of teaching experience at Graduate
4. CU41 Modeling and Analysis of Electrical 03-07-2017 14-07-2017
and Post-Graduate levels. Her present research area includes Nonlinear System Dynamics Circuits using Pspice and MATLAB
and Control, Fuzzy Logic Control, Engineering Education, Competency Based Curriculum 5. PS08 Design and Implementation of Outcome 31-07-2017 11-08-2017
Design, Design and Implementation of Outcome Based Curriculum. She obtained her BE Based Curriculum
degree in Electrical Engineering from Regional Engineering College, Silchar and MEE degree 6. CU70 Application of MATLAB Control System, 21-08-2017 01-09-2017
with specialization in Control System from Jadavpur University. She obtained her doctoral Image Processing and Fuzzy Logic Tool
degree in the area of Fuzzy Logic Control from Jadavpur University, Kolkata. Box
Since joining at the Institute, Dr. Kar has offered several Short Term Training Programmes 7. GUW10 Designing Assessment tools for effective 18-09-2017 22-09-2017
(STTP) in the areas of Electric Circuits, Linear and Nonlinear Control, Fuzzy Logic Control, implementation of Technical Curriculum
MATLAB and its Application in Engineering, Exposure to Scilab, Design and Implementation 8. ICT06 Designing Effective Teaching under 06-11-2017 10-11-2017
Outcome Based Education
of Technical Curriculum, Competency Based Curriculum Design, Design and Implementation
9. CU105 Application of MATLAB in Modeling and 20-11-2017 01-12-2017
of Outcome Based Curriculum, Effective Teaching and Students’ performance Evaluation etc. Analysis of Control Systems
She has published more than 20 papers in various National, International Journals and 10. BBSR18 Modeling and Analysis of Control Systems 04-12-2017 08-12-2017
Conference Proceedings and is a member of the Institution of Electrical Engineers (IEE) and using MATLAB
life member of Indian Society of Technical Education (ISTE) and All India Association for 11. PS19 Design of Question Bank for effective 05-02-2018 16-02-2018
Educational Research (AIAER). At present, she is functioning as Academic Coordinator of implementation of Technical Curriculum
the Institute.

“The Principal goal of education is to create individuals


who are capable of doing new things, not simply of
repeating what other generations have done.”
- Jean Piaget

86 NITTTR, Kolkata www.nitttrkol.ac.in


STTP SCHEDULE 2017 - 2018

E-mail Addresses and Phone Numbers of Faculty Members


Name Email-ID Telephone No.
Dr. Anuradha De anuradhade52@yahoo.com, anuradha@nitttrkol.ac.in 66251992
Shri Arpan Kumar Mondal arpan.nitttrk@gmail.com, arpan@nitttrkol.ac.in 66251985
Dr. Dipankar Bose dipan88@yahoo.co.in, dbose@nitttrkol.ac.in 66251981
Ms. Habiba Hussain habs2@rediffmail.com, habiba.hussain@nitttrkol.ac.in 66251947
Dr. Indrajit Saha indra.raju@gmail.com, indrajit@nitttrkol.ac.in 66251930
Dr. Jagat Jyoti Mandal jjm_civil03@yahoo.co.in, jjmandal@nitttrkol.ac.in 66251920
Dr. Kinsuk Giri kinsuk84@gmail.com, kinsuk@nitttrkol.ac.in 66251994
Mrs. Mithu Dey mithudey2007@rediffmail.com, mdey@nitttrkol.ac.in 66251964
Shri Nirmal Kumar Mandal mandal_nirmal@yahoo.com, nkmandal@nitttrkol.ac.in 66251973
Dr. Phalguni Gupta pg.nitttr.kol@gmail.com, phalgunigupta@nitttrkol.ac.in 66251900
Dr. Prasanta Sarkar sarkarprasant@gmail.com, sarkarprasant@yahoo.com, 66251937
psarkar@nitttrkol.ac.in
Shri Rajeev Chatterjee chatterjee.rajeev@gmail.com, rajeev@nitttrkol.ac.in 66251909
Dr. Ranjan Dasgupta ranjandasgupta@hotmail.com, ranjandasgupta@nitttrkol.ac.in 66251954
Dr. Rayapati Subba Rao rssubbarao@hotmail.com, rsrao@nitttrkol.ac.in 66251974
Dr. Sagarika Pal spal922@yahoo.co.in, sagarikapal@nitttrkol.ac.in 66251938
Dr. Sailendra Nath Mandal drsailen@hotmail.com, snmandal@nitttrkol.ac.in 66251908
Dr. Samir Roy samir.cst@gmail.com, sroy@nitttrkol.ac.in 66251988
Dr. Samiran Mandal samiran_m04@yahoo.com, samiran.mandal@nitttrkol.ac.in 66251982
Dr. Santanu Bhanja san244in@yahoo.com, sbhanja@nitttrkol.ac.in 66251923
Dr. Sekhar Chakraborty sekhar_nitttr@yahoo.com, schakraborty@nitttrkol.ac.in 66251959
Mrs. Sheela Yadav Rai sheelayadavrai2007@mail.com, sheelayadavrai@nitttrkol.ac.in 66251997
Dr. Soumitra Kumar Mandal mandal_soumitra@yahoo.com, skmandal@nitttrkol.ac.in 66251970
Dr. Subrata Chattopadhyay subrata0507@gmail.com, schattopadhyay@nitttrkol.ac.in (0674) 2300776
Dr. Subrata Mondal subratamondal@yahoo.com, subratamondal@nitttrkol.ac.in 66251917
Shri Sukanta Kumar Naskar sukanta_naskar@yahoo.com, sknaskar@nitttrkol.ac.in 66251932
Dr. Tushar Kanti Dey tkdiitr@gmail.com, tkdey@nitttrkol.ac.in 66251921
Dr. Uday Chand Kumar udaychandkumar@yahoo.com, uckumar@nitttrkol.ac.in 66251998
Dr. Urmila Kar urmilakar@rediffmail.com, urmilakar@nitttrkol.ac.in 66251931

www.nitttrkol.ac.in NITTTR, Kolkata 87


NITTTR, Kolkata Guwhati Extension Centre Contact:

The Consultant
NITTTR Kolkata Extension Centre, Guwahati
Girls’ Polytechnic Campus
Bamuni Maidan
Guwahati-781 021
Assam
Tel/Fax: +91 (361) 2652344
Email: extn.guw@nitttrkol.ac.in

Main Campus Contact:


The Academic Coordinator
NITTTR, Kolkata
Block-FC, Sector-III
Salt Lake City, Kolkata – 700 106
Tele/Fax: (033) 23587442/66251901
PBX : +91-(33) 66251919
Fax: +91 (33) 23376331
Email: academic@nitttrkol.ac.in
academicnitttr@yahoo.com

NITTTR, Kolkata Bhubaneswar Extension Centre


Contact:
The Consultant
NITTTR Kolkata Extension Centre, Bhubaneswar
Government Polytechnic Campus, Chandrasekharpur
Bhubaneswar-751 023
Odisha
Tel/Fax: +91 (674) 2300776
88 Email: nitttrbbsr2000@gmail.com
extn.bbsr@nitttrkol.ac.in

Вам также может понравиться