Академический Документы
Профессиональный Документы
Культура Документы
H
HONIYWiI.l.
TN!5TTTUCTTOIIS
54278, g27C
PURGE TIMER
APPLICATION
The 5427B and 5427C are synchronous motor driven,
automatic reset timers designed for general applications.
The timing period is adjustable f rom 2 to 15 minutes, 4 to
30 minutes, or 8 to 60 minutes in the 5427B and from 2 to
10 minutes for the 5421C. Control switching is spdr: in
the 54278 and dpdt in the S427C. The timer is complete-
ly enclosed by a remo'.'able cover which protects against
dust and tampering,
FEATURES
r Three timer ranges.
. Automatic resetting even on momertary po\1/er
failure.
o Terminal board lrriring.
o l\4odels availab e for var ous i:re,ic iege: a-d frequencies.
SPECIFICATIONS
IVIODE L:
5427 B Purge Timer--Automatic resetting, adjustable :1 )l
timing, spdt configuration, three timing ranges,
S427C Pu rge Ti mer--Automatic resettin g, ad j ustable
tln.r.g, doot configural\on,2 to 10 minute timing.
T11,,] ING:
54278-2 to 15 minutes,4 to 30 minutes or 8 to 60 7/32 IN,
minutes, adjustable. OA (4)
240 tr OR DE RI NG I N FORIVIATION
Pilot Duty-125VA SPECIFY-
1. ivlodsl nurrber.
POV/ER CONSUIVIPTION: 6.5 watts. 2, Voltage and f requency
AIM Bl ENT TEIVIPE RATU R E RANGE: 0 to 1 25 F 3. Timing range required.
MOUNTING TERMINAL
@
I
v/)
TT /41
6
q @
?
DAN
6 t'a
w) @ @
The 5427 must be mounted in a vertical position to 7 5 3 I
WIRING B
CAUTICIN
before making wiring +
shock or
a:2'B s4275
aI
-, .14- -
NOTE: to energize terminal 6 on the S427B by
Be sure
either a jumper, sr,vitch, or series 40 control from ter-
minal 1. Without power to this terminal the timer Fig. 3-Switching action of S427B. When power is re-
will not operate as specified. moved from terminals i and 6, timer assumes
switching condition "A".
All wiring must go to the terminal board. DO NOT
make any connections to the other parts of the timer's
electrical circuits.
t 1
t
SETTING AND OPERATION s4?7C
I
The 54278 control switch is spdt (Fig. 3). The
5427C control switch is dpdt (Fig.4). Note that T
1 h
NOTE: 54278 timing can be interrupted (without Fig. 4-Switching action of 527C. When power is re-
resetting) by maintaining power on the clutch and moved from terminal 1, timer assumes switchittg
interrupting motor power. 54278 times only condition "A".
while motor is running.