Академический Документы
Профессиональный Документы
Культура Документы
All equipment used in attaining these results are traceable to Transnet Engineering Standards.
Test results contained herein relate only to the sample supplied.
Hand written changes made to the certificate are not valid unless counter-signed by the RWC or designate.
Any changes to the certificate will be made under the heading of the original certificate number followed by "Revised" i.e XXXXXXX - A Revised
Electronic copies of the certificate are to be kept on file for a period no less than 10 years.
This certificate may not be partially replicated without the written consent of Transnet Engineering.
This certificate is issued according to the requiremements set out by Transnet Engineering and relevant codes.
Test Results, in accordance with spec. provided Material side 1:
Test Results, not in accordance with spec. provided Material side 2:
No requiremements provided Description:
Welding Process:
Etching Material & Time:
TESTS WERE CARRIED OUT IN ACCORDANCE WITH THE FOLLOWING
TRANSNET ENGINEERING PROCEDURES Joint type:
Material ID number:
Welder:
Welding Position:
Figure 1: Area where HV10 were conducted Figure 2: Macro sample of sample 2 Figure 3: M
DATE:
Result
h≤1.5mm+0.15a
1.5
1.5
EN ISO 6507-1
8 9 10
18 19 20
28 29 30
38 39 40
48 49 50
58 59 60
REMARKS