Вы находитесь на странице: 1из 2

SWARNANDHRA

College of Engineering & Technology


(Autonomous)
Seetharamapuram, NARSAPUR, W.G. Dt., 534 280.
DEPARTMENT OF MECHANICAL ENGINEERING
LESSON PLAN

Contact
Course Code Course Title (Regulation) Sem Branch Periods/Week
Sections

Mechanical
BTME6T02 Heat transfer (R14) VI 5 A&B
Engineering
COURSE OUTCOMES: Students are able to
CO1: Define and explain the basic concepts regarding different modes of Heat transfer [K1 & K2].
CO2: Analyze conduction mode of heat transfer and demonstrate its applicability in one dimensional mode [K4 & K3].
CO3: Summarize convection mode of heat transfer and apply it for different real life systems [K2 & K3].
CO4: Illustrate radiation mode of heat transfer with the help of governing laws [K4].
Ref Text Total Delivery
Unit No Outcome Topics/Activity Method
book Periods
Unit-1. INTRODUCTION AND BASIC CONCEPTS
1.1 Modes and mechanisms of heat transfer – T1, T2, Chalk &
Basic laws of heat transfer, applications of R1 Talk, PPT,
CO 1. heat transfer
Define and explain the Active
1 1.2 General heat conduction equation in T1, T2, Learning
basic concepts regarding
Cartesian, Cylindrical and Spherical R1 10
different modes of Heat & Tutorial
coordinates.
transfer [K1 and K2].
1.3 Steady, unsteady and periodic heat transfer T1, T2,
- Initial and boundary conditions. R1
1.4 Problems T1
Unit-2. CONDUCTION HEAT TRANSFER
2.1 ONE DIMENSIONAL STEADY STATE T1, T2,
CONDUCTION HEAT TRANSFER: R3
Homogeneous slabs, hollow cylinders and
spheres – overall heat transfer coefficient –
CO2. electrical analogy – Critical radius of
insulation.
2.2 Systems with Heat generation. Extended T1, T2, Chalk &
Analyze conduction mode
of heat transfer and surface (fins) Heat Transfer – R3 Talk,
2 Long Fin, Fin with insulated tip and Short PPT
demonstrate its
Fin. 12 Tutorial,
applicability in one
dimensional mode [K4 2.3 ONE DIMENSIONAL TRANSIENT T1, T2,
Active
and K3]. CONDUCTION HEAT TRANSFER: R3
Systems with negligible internal resistance Learning &
– Significance of Biot and Fourier Case Study
Numbers
2.4 Chart solutions of transient conduction T1, T2,
systems. R3

2.5 Problems T1
MID I EXAMINATION DURING SIXTH WEEK
Unit-3. CONVECTIVE HEAT TRANSFER
3.1 Classification of convective heat transfer – T1, T2, R1
dimensional analysis – Buckingham Pi
Theorem for forced and free convection,
Significance of non-dimensional numbers
~ concepts of continuity, momentum and Chalk &
3 Energy Equations. Talk,
3.2 EXTERNAL FLOWS: Concepts about T1, T2, R1 PPT,
hydrodynamic and thermal boundary layer Tutorial
and use of empirical correlations for
convective heat transfer -Flat plates and 12
Cylinders.
3.3 INTERNAL FLOWS: Concepts about T1, T2, R1
Hydrodynamic and Thermal Entry Lengths
- Use of empirical relations for Horizontal
Pipe Flow and annulus flow.
CO 3. 3.4 FREE CONVECTION: Development of T1, T2, R1
Hydrodynamic and thermal boundary layer
Summarize convection
along a vertical plate – Use of empirical
mode of heat transfer and
relations for Vertical plates and pipes.
apply it for different real-
life systems[K2 and K3].
. 3.5 Problems T1

CO 3. Unit-4. HEAT TRANSFER WITH PHASE CHANGE


Summarize convection 4.1 BOILING: – Pool boiling – Regimes, T1, T2, Chalk &
mode of heat transfer and Calculations on Nucleate boiling R3 Talk,
apply it for different real- 4.2 Critical Heat flux and T1, T2, PPT &
life systems[K2 and K3]. Film boiling. R3
4 Tutorial, ,
. 4.3 CONDENSATION: Film wise and drop T1, T2,
10 Industrial
wise condensation R3
4.4 Film condensation on vertical and T1, T2, Visit,
horizontal cylinders using empirical R3 Demonstrat
correlations. ion with
4.5 Problems T1 models.
MID II EXAMINATION DURING TWELTH
Unit 5. HEAT EXCHANGERS
5.1 Classification of heat exchangers T1, T2, Chalk &
R3 Talk,
CO 3.
PPT,
Summarize convection
5.2 overall heat transfer Coefficient and T1, T2, Virtual
5 mode of heat transfer and
fouling factor R3 labs,
apply it for different real- 9
life systems [K2 and K3]. Tutorial, &
5.3 Concepts of LMTD and NTU methods T1, T2, Project
R3 based
learning
5.4 Problems T1
Unit 6. RADIATION HEAT TRANSFER
6.1 Emission characteristics and laws of black- T1, T2,
body radiation – Irradiation R1

6.2 laws of Planck, Wien,Kirchoff, Lambert, T1, T2, Chalk &


CO 4. Stefan and Boltzmann R1 Talk, PPT
6 Illustrate radiation mode of Tutorial,
heat transfer with the help 6.3 heat exchange between two black bodies – T1, T2, 12
Active
of governing laws [K4]. concepts of shape factor R1
Learning &
Seminars
6.4 Emissivity – heat exchange between grey T1, T2,
bodies, radiation shields. R1

6.5 Problems T1
Total 67
MID III EXAMINATION DURING EIGHTEENTH WEEK
END EXAMINATIONS
Text Books:
T1 Fundamentals of Engineering Heat and Mass Transfer - R.C.Sachdeva / New Age International
T2 Heat Transfer – P.K.Nag / TMH.
T3 Heat Transfer – S.P.Sukhatme / University Press
Reference Books:
R1 HEAT TRANSFER - HOLMAN/ TMH
R2 HEAT AND MASS TRANSFER- CENGEL/ McGraw Hill
R3 Heat and Mass Transfer – R.K. Rajput / S.Chand& Company Ltd.

Вам также может понравиться