Академический Документы
Профессиональный Документы
Культура Документы
This sulfate-free bodywash combines This feather-light moisturizer features Finsolv® SLB-201 and Finsolv® EMG-20
Iselux® and Pureact WS Conc. to Activemol EH-25, which provides great provide conditioning in this thick and
produce dense creamy lather. Activsoft emolliency and skin-feel without any creamy shampoo. Pureact WS Conc.
C-17 imparts a soft, elegant feel to oiliness. A mineral oil free formulation, and Pureact I-78C create excellent
the skin and enhances foam quality it benefits from added vitamins and flash-foam which rinses easily to leave
with Activsoft S and Aminol® CM also uses Natrlquest® E30, Innospec’s hair feeling soft and clean.
flakes thickening the formulation biodegradable chelating agent.
and stabilizing the foam. Finsolv® TN
acts as a solubilizer to gently remove Clearly kind foaming hand
soils from the skin and provides wash - AC011b Light as a feather sunscreen
conditioning. spray - AC069
Iselux® gives a long-lasting luxurious
Shiny locks intensive foam to this clear cleansing wash. This sunscreen spray uses Finsolv® TPP
conditioner - H0042 Finsolv® SLB-201 and Finsolv® EMG-20 and Finsolv® EB as the solubilizers for
ensure a soft moisturized after-feel on the organic sunscreen agents. Finsolv®
Condicare SD provides intensive the skin. The formulation is also ideal TPP offers enhanced solubilization
conditioning in this five minute for a mild and gentle face wash. versus Finsolv® TN so only a small
treatment mask. Hair is left feeling amount is required. Finsolv® EB
soft and silky with good shine and Golden goddess helps to achieve a totally non-greasy
manageability. moisturizer - S0087 formulation that is easily applied and
absorbed.
This light, readily absorbed moisturizer
leaves a subtle golden sheen on the
skin. It contains Finsolv® TN which
provides emolliency and removes any
oiliness associated with using other
oils. The formulation is thickened with
Rhesperse RM100.
Luscious lather sulfate-free bodywash AC136
A mild, sulfate-free cleansing bodywash which demonstrates the ability of Iselux® to create structured systems delivering
high oil content while retaining excellent foaming properties.
Preparation procedure
1 Prepare phase A with gentle stirring.
2 With smooth mechanical agitation, slowly blend B into system. Mix until completely dispersed and uniform.
3 Slowly blend C into system and mix until uniform. Warm system to 40-45ºC with smooth mechanical agitation.
4 Slowly blend premix D into main system and mix until uniform.
5 Add phase E ingredients to system sequentially with gentle stirring.
6 Remove heat and blend phase F into main system.
7 Add compatible perfume, dye(s) and preservative.
8 Adjust pH of system to 5.0-5.6 with citric acid solution (50% aqueous) as required. System should thicken noticeably with
pH adjustment. Mix gently for at least 30 minutes to reach final consistency.
Properties
Appearance : White cream
pH : 5-5.6
Viscosity* : 200,000-250,000cps
Stability : 1 month at 45ºC
Preparation procedure
1 Prepare phase A and heat to 65oC stirring.
2 Prepare phase B and heat to 65oC stirring.
3 Add B to A with high shear.
4 Allow to cool to 40oC before adding C.
Properties
Appearance : White cream
pH : 4.5-5.5
Viscosity* : 10,000-20,000cps
Stability : 1 month at 45ºC
Preparation procedure
1 Prepare phases A and B separately with gentle mixing until uniform.
2 Add B to A with stirring.
3 Add C with gentle mixing and stir until uniform.
Properties
Appearance : Glossy, white lotion
pH : 6.0-6.5
Viscosity* : 18,000-20,000cps
Stability : Passed 1 month at 45oC
Preparation procedure
1 Prepare phase A, heating to 45-50ºC with stirring.
2 Add the premix of phase B and mix until uniform.
3 Slowly blend in phase C ingredients one at a time and mix until uniform.
4 Cool system to 30-35ºC. Slowly blend in preservative and mix until uniform.
5 Adjust pH to 5.5-6.0 with 50% aqueous citric acid solution.
Properties
Appearance : Clear, thin liquid
pH : 5.5-6.0
Stability : Passed 1 month at 45oC
Golden goddess moisturizer S0087
A rapidly absorbed, silky moisturizing lotion which leaves a golden sparkle on the skin.
Preparation procedure
1 Prepare phases A and B separately with stirring.
2 Add B to A with stirring.
3 Add C with gentle mixing until uniform.
Properties
Appearance : Glossy, white lotion
pH : 6.0-6.5
Viscosity* : 18,000-20,000cps
Stability : Passed 1 month at 45oC
Preparation procedure
1 Add Natrlquest® E30 to water.
2 Begin heating to 50-60 ºC and add and mix the Carbopol until fully hydrated.
3 Add glycerin with stirring.
4 With smooth mechanical agitation, slowly blend each ingredient of phase B, one at a time, into phase A and mix until
completely dispersed.
5 Add TEA and mix until uniform.
6 Cool system to 30-35ºC, add preservative and mix until uniform.
7 Adjust pH to 5.5-6.0 with citric acid solution as needed.
Properties
Appearance : Translucent, thick gel
pH : 5.5-6.0
Viscosity* : 40,000-45,000 cps
Stability : Passed 1 month at 45oC, 3 freeze/thaw cycles
Preparation procedure
1 Add Natrlquest® E30 into water.
2 Start to heat at 75oC and add premix B and ingredient C.
3 In a separate vessel, mix and melt ingredients D to 75oC.
4 Add ingredient E to oil phase at 75oC with stirring until evenly dispersed.
5 Add oil phase (D) to water phase at 75oC with stirring.
6 Start cooling and add and mix ingredients F and G below 50oC and continue mixing to below 25 oC.
Properties
Appearance : Milky white
pH : 5.5-6.0
Stability : 1 month at 45oC
Viscosity* : 1,000-3,000 cps
Star rating : 3
*
+
* Brookfield DV-E @ 50rpm, 27-30ºC, #2 spindle 5 person in-vivo SPF test
® denotes that Natrlquest is a registered trade mark in the UK, the European Union and the USA in the name of Innospec Ltd
® denotes that Finsolv is a registered trade mark in the USA in the name of Innospec Active Chemicals
® denotes that Iselux is a registered trade mark in the UK in the name of Innospec Ltd
® denotes that Aminol is a registered trade mark in the USA in the name of Innospec Active Chemicals
The facts stated and the recommendations
made are based on our own research and/
or the research of others, and are believed to
be accurate. No guarantee of their accuracy is
made, however, and unless otherwise expressly
provided by law or in written contract, the
materials are sold without warranties, expressed
or implied, in particular without guarantee as
to suitability for particular purpose. Innospec
assumes no responsibility for injury or damage
to users or third parties. Recipient agrees to
assume all risk and liability whether used singly
or in combination with other materials.
For inspiration, ideas or further
information, please contact us.
Printed on paper from well-managed forests
Innospec Active Chemicals and other controlled sources
Americas
Tel: +1 888 633 8028
Email: americas-ac@innospecinc.com
Asia-Pacific
Tel: +65 6336 6286
Email: aspac-ac@innospecinc.com
www.innospecinc.com