Академический Документы
Профессиональный Документы
Культура Документы
Physics-VIII
1.Force and Pressure Force
Pressure
2.Friction Friction and its Types
Minimizing Friction
3.Sound Production and Propagation of sound
Characteristics of sound
Noise and Music
4.Chemical Effect of Electric Current Conductivity of Liquids
Chemical Effect of Electric Current
5.Some Natural Phenomena Introduction and Lightning
Lightning and Safety
Earthquakes
6.Light Reflection in Plane mirrors
Light and Eyes
7.Stars and the Solar System Celestial Bodies
Solar System
Other Members of Solar System
Constellations
Chemistry-VIII
1.Synthetic Fibres and Plastics Fibres
Plastics
2.Materials, Metals and Non-Metals Physical Properties Chemical Properties
of Metals
Physical Properties Chemical Properties
of Non-Metals
Biology-VIII
1.Crop Production and Management Agriculture
Crop Protection
Harvest and Storage
2.Micro Organisms: Friend and Foe World of Micro Organisms
Dealing with Harmful Micro Organisms
Food Preservation
Nitrogen Fixation
3.Conservation of Plants and Animals Deforestation and Reforestation
Conservation of Forest and Wildlife
4.Cell-Structure and Functions Introduction to Cells
Structure and Function of Cells
5.Reproduction in Animals Sexual Reproduction in Animals
Oviparous and Viviparous Animals
Asexual Reproduction in Animals
6.Reaching the age of Adolescence Changes During Puberty
Hormones and Reproductive Function
Adolescence and Health
Pressure
Minimizing Friction
Characteristics of sound
Earthquakes
Solar System
Constellations
Force is a kind of push or a pull on an object. The interaction of one object with another results
in a force between the two objects. If a force acts on an object in the direction of its motion,
then the object moves faster. If a force acts on an object opposite to the direction of its
motion, then the objects slows down. Force may also change the direction of motion of an
object. The effect of force changes with the direction of its application. Forces acting on an
object in the same direction add to each other, while forces acting opposite to each other
results in the difference of the forces.
The strength of force is called its magnitude. The international unit used to measure force is
newton. A force can change the shape and size of an object. There are many types of forces.
The force resulting from the action of muscles is called muscular force. We make use of
muscular force of animals like bullocks, horses and camels get our activities done. The point
where force is applied on an object is called the point of contact. Friction is another type of
contact force that always acts opposite to the direction of motion of the objects. Magnetic force
and electro-static force are non-contact forces as they act on an object from a distance. The
force of gravity is also a non-contact and an attractive force exerted by the earth on objects,
due to which objects fall to the ground. Gravitational force is an attractive force between any
two objects in the universe, and is a non-contact force.
The thrust acting per unit surface area is pressure. The force acting on an object perpendicular
to its surface is thrust. Pressure is measured in newton/metre2, which is equal to 1 pascal (Pa).
Liquids and gases exert pressure on the walls of the vessel in which they are carried. Air exerts
pressure on all objects. The pressure exerted by air is called atmospheric pressure.
A rubber sucker sticks to the surface of an object as atmospheric pressure acts on it. In order to
fix nails to walls, sharp nails are used, as the area of contact of the nail with the wall is small and
more pressure acts on it for a given force.
A suction pump sucks out all the air from a closed container, creating a vacuum in it.
Friction is a force that opposes the relative motion between two surfaces of objects in contact.
The force of friction always acts in a direction opposite to that of the applied force. Friction is
due to irregularities on the surfaces of the objects in contact. Friction depends on the
smoothness of the surfaces in contact. The force of friction depends on the nature of the
surfaces in contact. The force of friction increases if the surfaces are pressed harder. Frictional
force that comes into action before the start of the motion of an object is called static friction.
When an object slides over another surface, the frictional force that comes into action is sliding
friction.
When a roller rolls over a surface, the frictional force that comes into action is rolling friction.
Rolling friction is less than sliding friction, while sliding friction is less than static friction. Friction
due to gases and liquids is called fluid friction, and is also called drag. Friction is a necessary
evil. There are instances in daily life where friction is a necessity. For example, without friction,
we cannot hold objects in our hands; we cannot walk and cannot light a match stick. Examples
where friction has to be minimised and not desirable is the friction between machinery parts,
which causes wear and tear.
Friction is a necessary evil. Without friction, we cannot walk, hold articles, the brakes of
automobiles do not work, and the power of a motor cannot be transferred to a grinding
machine.
However, friction is undesirable in certain areas and we need to reduce it. Friction between the
sliding surfaces of two objects can be reduced by making the surfaces in contact smooth by
polishing the surfaces. Sliding friction between the moving parts of vehicles can be reduced by
using oil, grease or graphite. In electrical plugs, graphite is used to reduce friction between the
plug pins and the corresponding socket. In certain machines, like the drill used by a dentist, a
layer of air is used as a lubricant to reduce friction between the moving parts.
The interlocking of irregularities on the surfaces of two bodies in contact, which cause friction,
is overcome to great extent by the use of lubricants, the material used to reduce friction, and
friction is reduced. Rolling friction is less than sliding friction. Hence, sliding friction is replaced
by rolling friction by using rollers, like ball bearings between the hub and the axles in the
moving parts of machines and vehicles. When an object moves through a fluid, the friction
offered is called fluid friction. It is also called drag. Fluid friction depends on the shape of the
object and the nature of the fluid. Aeroplanes, boats, fishes and birds which move through fluids
have bodies of special shape so as to reduce the friction due to fluid.
Sound is a form of energy that causes the sensation of hearing. Sound needs a medium to
travel. Sound travels through gases, liquids and solids. The speed of sound is the maximum in
solids, less in liquids and the least in gases. Sound cannot travel through vacuum. In humans,
sound is produced by the voice box or the Larynx. Vocal cords in the larynx vibrate and produce
sound. We hear sound with our ears. The ear drum has a vibrating membrane like a stretched
rubber sheet. When a sound note reaches the ear, the ear drum vibrates, and the vibrations get
converted into signals that are carried to the brain to get a sensation of hearing.
To produce pleasant sounds, a number of musical instruments have been developed. Some
instruments produce sound due to the vibration of membranes, some due to the vibration of
strings, and some others produce sound due to the vibration of an air column. The to and fro or
back and forth motion of an object is called vibration. The sitar, veena, violin, guitar and ektara
are some stringed instruments. The tabla, cymbals, ghatam, kartal and manjira are some
instruments that work on the vibration of a membrane, and instruments like the flute and the
trumpet produce sound due to the vibration of an air column present in them.
Sound is a form of energy produced by a vibrating body. Sound requires a medium for its
propagation. Sound does not propagate in vacuum. Sound is produced due to the vibration of
an object.
The to and fro or back and forth motion of an object is called vibration. To produce pleasant
sounds, a number of musical instruments have been developed. Some instruments produce
sound due to the vibration of membranes, some due to the vibration of strings, and some
others produce sound due to the vibration of an air column. The maximum displacement of a
vibrating particle from its mean or equilibrium position is called its amplitude. The time taken by
the vibrating particle for one full vibration or oscillation is called the time period of vibration.
The number of vibrations per second is called the frequency. Frequency is measured hertz (Hz).
Sound produced by any means has the following characteristics, namely, loudness, pitch or
shrillness, and quality or timbre.
The loudness of sound depends on its amplitude. The loudness of sound is proportional to the
square of the amplitude. A roar of a lion is louder than a woman's voice. The pitch of sound
depends on its frequency. If frequency is more, then the pitch or shrillness is more. The pitch of
a woman's voice is more and it is shriller then a man's voice. The loudness of sound is measured
in Decibel (db). If loudness exceeds 80 db, then the sound becomes physically painful.
Not all sound produced by vibrating bodies is audible. The human ear can only recognise sounds
of frequencies in the range of 20 Hz and 20,000 Hz. This range of frequency is called audible
Any intolerable and irritating sound is called noise. The word noise comes from the Latin word
nausea, meaning seasickness.
Music refers to any sound that is pleasant to the ear. Sound produced by musical instruments is
pleasing to the ear. But if the intensity of the sound exceeds a certain limit, then it becomes
intolerable and is noise.
Noise pollution may cause high blood pressure, panic attacks and lack of sleep among those
exposed to it. To reduce noise pollution, trees should be planted along roads and in residential
areas, factories should not be set up in residential areas, vehicles should not blow horns around
schools, hospitals and residential area, TVs and music systems should not be played at high
volume.
Continuous exposure to loud noise may cause temporary or even permanent hearing
impairment.
We can use a tester to check if electricity is flowing through a wire in a circuit. If the bulb in the
tester glows, it indicates that current is flowing through the wire; else, current does not exist.
Electrical conductivity of liquids can be explained by a simple activity of taking a liquid, like
lemon juice, in a container, inserting electrodes in it, connecting the two electrodes to the
terminals of a battery with a bulb between them. The bulb glows, indicating that lemon juice is a
conductor of electricity. Several liquids can be checked for electrical conductivity on in the same
way.
We find that liquids like lemon juice, liquid soap, rain water, salt solution, etc. conduct
electricity, whereas liquids like distilled water, oil, etc. do not conduct electricity. The materials
that conduct electricity are conductors and those that do not conduct are called insulators.
When electricity is passed through a conducting solution, the molecules of the solution
dissociate into ions, which cause electrical conduction through the liquid. This process is due to
the chemical effect of electric current.
The most common application of the chemical effect of electric current is electroplating. In this
process, there exists a liquid, usually called the electrolyte, through which current passes. Two
electrodes, connected to the terminals of a battery with a switch in between, are inserted in the
liquid. The electrode that is connected to the positive terminal of the battery is called the
"anode," and the other connected to the negative terminal is called the "cathode".
Electroplating is done in industries to have an anti-reactive coating on the parts of machines so
that they do not react with the raw material, to have an anti-corrosive coating for the machines
so that they do not get corroded, and a heat-resistive coating for parts like boilers to resist the
heat produced by the machinery.
Lightning is a natural phenomenon that has fascinated people for ages. Several people thought
and researched about the cause of lightning and its process. Benjamin Franklin discovered that
there is an electric discharge between clouds that produces a spark, and it is the electric spark
between the clouds and the earth that appears as lightning. His famous kite experiment proved
this fact.
The occurrence of lightning is as follows. The formation of clouds involves friction between
water particles in the atmosphere. The friction charges the particles. Among the positive and
negative charges, the negative charge accumulates at the bottom of the cloud and the positive
charges in its top. As the accumulation of the charge increases, the cloud will create a positive
charge on the ground nearby. As the amount of charge increases, the negative charge on the
cloud tends to make a path towards the ground, and it results in a narrow streak of electrical
discharge, which we call lightning.
An electroscope is a device that detects the type of charge on a body. Like charges repel and
unlike charges attract each other. This is used in an electroscope. An electroscope consists of a
glass jar fitted with a cork lid and a metallic wire passing through it. There are two metallic strips
at the bottom of the wire. The upper end of the wire is connected to a metal disc. A body that is
positively charged is touched to the metal disc, so that the charge is transferred to the metal
strips through the wire, and they diverge from each other on gaining a like charge. Now, if a
Lightning is caused due to the heavy electric discharge from the clouds to the earth. If lightning
is not controlled, it can cause heavy damage to life and property. Hence, protective measures
are of utmost importance during lightning strikes. Interiors of buildings are safe places to
protect ourselves from lightning strikes. Taking shelter in interiors and not staying in open areas
is one of the best measures you can take. You should not take shelter under trees when in the
open, or go to an open area if outside. If you are in a vehicle, you should not come out of it; you
should also close the doors and windows of the vehicle.
Tall buildings are provided with lightning rods. A lightning rod a metal rod that is erected at the
top of a building. It is connected to a thick metallic plate, made of a good conducting material
like copper and buried under the earth, through a thick copper wire. If lightning is likely to strike
the building, it is attracted by the lightning rod, and the electrical discharge is transferred
through the wire to the ground. Thus, it keeps the building safe.
A natural phenomenon that cannot be predicted is an earthquake. The earth consists of three
major layers, called the crust, the mantle and the core. The core is further divided into the inner
core and the outer core. The mantle consists of semi-solid material above which the crust floats.
The crust consists of oceans and continents. The crust is divided into several parts, called
tectonic plates. The regions where one tectonic plate slides against another are referred to as
fault zones, and these are the regions where an earthquake is likely to occur. Hence, these
zones are referred to as seismic zones.
The place in the interior of the earth where an earthquake occurs is the focus, and the region on
the surface of the earth that is the closest to focus is likely to experience the largest damage.
This region is called the epicentre of the earthquake.
Light is a form of energy given out by a self luminous body, which travels into infinite media.
Light makes things around us visible. Objects that do not give out light of their own are called
non-luminous objects. They just reflect light that falls on them. We see with our eyes. When
light reflected from an object enters our eyes, the object becomes visible. A mirror changes the
direction of light that falls on it. The light ray that falls on a mirror is called the incident light ray.
The ray that comes back from the surface after reflection is called the reflected light ray. The
point where the incident ray strikes the reflecting surface is called the point of incidence. A line
drawn perpendicular to the mirror at the point of incidence is the normal. According to the laws
of reflection, the incident ray, the normal at the point of incidence, and the reflected ray lie in
the same plane; and the angle of incidence is equal to the angle of reflection.
Light rays are visualised as parallel rays. If the rays, after reflection from a surface, are parallel,
then the reflection is termed as regular reflection. The reflection from a plane mirror is an
example of regular reflection. When parallel rays, after reflection from a surface, are not
parallel, then it is called diffused reflection or irregular reflection. The reflection from an
uneven surface is diffused reflection. If a reflected light ray is reflected again on being incident
on another surface, it is termed multiple reflections. Multiple reflections are used in periscopes.
Periscopes are used in submarines, war tanks and by solders in bunkers to see objects that are
not visible directly. In a barber's shop, we see the back of the head using multiple reflections of
two mirrors. In a kaleidoscope, beautiful patterns are formed due to multiple reflections.
We see objects around us with our eyes. The eye is an important sense organ. The human eye is
roughly spherical in shape. Its transparent front part is called the cornea. Behind the cornea,
there is a muscular structure called the iris. There is a small opening in the iris, whose size can
be controlled, and is called the pupil. The iris controls the amount of light entering the eye.
Behind the pupil, the eye has a lens, which is thicker in the middle. The lens converges light on
the retina, which has a number of nerves. The nerves carry the sensations to the brain through
the optic nerve. The nerves contain two types of cells - cones and rods. The cones are sensitive
to bright light, while the rods are sensitive to dim light. The cones also distinguish the colour of
an object. The small region where the optic nerve and the retina meet has no sensory cells, and
is called the blind spot.
The impression of an image on the retina lasts for th of a second. If 16 still images of an object
are flashed before the eye per second, then the eye perceives the object as moving. The eye lids
protect the eye from dust. The eye has the ability to form a clear image of a near and a far
object. This ability is called its power of accommodation. For a normal eye, the distance for
clear vision is 25 cm. This differs from person to person, and varies with age. Some persons can
see near objects clearly and some others far off objects. These defects can be corrected using
suitable corrective lenses. The eye sight of some people becomes foggy in their old age, and
objects appear dim, due to cataract. Some people have no vision since birth. Such people use
Braille to read and communicate.
Stars are always fascinating to mankind. They are the most beautiful celestial bodies, about
which mankind contemplates. All the bodies in the universe, including the earth, constitute the
celestial bodies. The moon is the celestial body closest to us. Phases of the moon are the most
fascinating thing for people of all ages in spite of knowing the science behind the formation of
the phases. The moon is a natural satellite of the earth, and it reflects the sunlight incident on it.
Due to its revolution around the earth, when it is at different positions in its path, the apparent
disc of the moon changes, which gives rise to its phases. When the moon is positioned between
the sun and the earth, the illuminated portion of the moon is away from the earth, and we are
not able to see the moon. We call this day as the 'new moon day'. With time, the position of the
moon changes and the illuminated portion of the moon exposed to the earth gradually
increases. Thus, the size of the apparent disc of the moon increases gradually from a crescent to
a full round when the earth lies between the moon and the sun. We call this day the 'full moon
day'.
The duration from one new moon day to the succeeding new moon day is the lunar month. If
the moon is observed closely, we find craters, depressions on the surface of the moon, which
might have been formed by the collision of some heavenly body like a meteorite with the moon.
Even before astronauts landed on the moon, we were able to find information about the
universe by celestial objects like meteorites. Meteors are dust-like material, which vary from a
small pebble to a big boulder of several hundred kilometre in size, from outer space that enters
the earth's atmosphere. Due to friction between the meteor and the atmosphere, the meteor
The huge distances between the earth and other celestial bodies are measured in light years. A
light year is the distance covered by light in one year.
Solar System
The sun is a major source of heat and light for all the planets in the solar system. Planets reflect
sunlight that is incident on them. They have no light of their own, so they don't twinkle like the
stars. Planets have definite paths called orbits in which they revolve around the sun. The time
taken by a planet to complete one full revolution around the sun is called its period of
revolution. The time taken by a planet to rotate a full 360 degrees on its axis is called its period
of rotation. A celestial body that revolves around another celestial body is called a satellite.
Mercury is the smallest planet in the solar system as well as the closest to the sun. It takes
about 88 days to complete one revolution around the sun. Venus is the second closest planet to
the sun. It takes about 225 days to complete one revolution around the sun. It has no satellites
or moons. Venus rotates from east to west.
Earth is the only planet on which life is known to exist. It takes 365 days for the earth to
complete one revolution around the sun. Mars completes one revolution around the sun in
about 687 days. It has two moons of its own. Jupiter is the largest planet in the solar system.
Jupiter's four larger moons are called Io, Europa, Callisto and Ganymede. It rotates the fastest
among all planets. The rings of Saturn are made of ice particles and dust. Saturn is the only
planet that is lighter than water. The largest of Saturn's moons is Titan. Uranus is the coldest
Apart from the sun and the planets, the solar system also consists of celestial bodies such as
meteors, comets and artificial satellites. A meteor is made up of debris. A meteor enters the
Earth's atmosphere at a very high speed. The friction with the atmosphere makes the meteor
hot and it burns till it disintegrates. As it falls to the ground, it glows brightly. This is why it is
called a shooting star. Some meteors reach the ground before they burn completely and
evaporate. These are called meteorites. Asteroids are made of rubble and are found in the gap
between the orbits of Jupiter and Mars. This gap is called the asteroid belt.
An asteroid does not have a tail. However, a comet is made up of a bright head and a long tail. A
comet consists of rock, dust, water, ice and frozen gases. Comets, too, revolve around the sun
periodically, but their period of revolution is larger as compared to that of planets. One of the
most famous comets is Halley's comet, named after the discoverer. Its period of revolution is 76
earth years. Artificial satellites are man-made and are launched from the earth. Artificial
satellites are used for transmission of television and radio signals, telecommunication, weather
forecasting and remote sensing.
Stars are always fascinating to mankind. They are the most beautiful celestial bodies about
which mankind contemplates. In ancient times, the revolution of the earth around the sun and
the apparent position of many groups of stars were studied extensively to explore the universe.
A group of stars that can be identified with the shape of an identifiable object like an animal or a
known object is called a constellation. Major constellations are the Ursa Major, Ursa Minor and
Cassiopeia.
The Ursa Major is shaped like a ladle and is also referred to as the Big Dipper. It consists of
seven stars placed in the form of a dipper. The stars in the constellation form the shape of a
bear, and hence it is also referred to as the Big Bear.
In India, it is popularly called the Saptarshi. Another popular constellation is the Orion, which is
shaped in the form of a hunter. Three middle stars in the Orion lead to a brighter star in the sky,
called Sirius. The Cassiopeia is another constellation, which can be located in the northern sky.
As the earth rotates on its axis from west to east, the stars appear to move from east to west.
But the pole star, which is located along the axis of the earth's rotation, does not appear to
move as it lies along the earth's axis and is towards the north of the earth. It helps in identifying
directions during the night.
Chemistry Chapters as
per NCERT Text Book Topics
Plastics
Coal
Petroleum
Natural Gases
Flame
Fuel
Water Pollution
Fibres
Dry quickly
Very durable
Less expensive
Easy to maintain
Readily available
Characteristics of rayon:
Cheaper than silk and can be woven like silk fibres.
Highly absorbent, soft and comfortable.
Easy to dye in a wide range of colours, and drapes well.
Uses of nylon:
To make seat belts in cars, curtains, sleeping bags, tents, tooth brushes,
socks and ropes,
To make parachutes and ropes for rock-climbing.
Polyester is a synthetic fibre, derived from coal, air, water and petroleum.
Polyester is made of repeating chemical units called esters.
Terylene is a popular form of polyester, which can be drawn into very fine
fibres. These fibres can be woven like any other yarn.
PET, or poly-ethylene terephthalate, is another familiar form of polyester,
which is used to make bottles, utensils, films and wires.
Polyester is also used for making hoses, ropes, nets, thread, raincoats, fleece
jackets, clothing and medical textiles.
Acrylic is a synthetic polymer of methyl methacrylate.
Fabric made from acrylic is warm to wear, retains its shape and is durable.
Plastics
Uses of plastics:
Special plastic is used in the making of cookware used in microwave ovens for
cooking food.
Teflon is a special plastic on which oil and water do not stick, hence used in
The metal base in an electric iron is for conducting heat, not electricity. Metals
are very good conductors of heat, too. That's why cooking utensils, irons,
heaters, etc. are all made of metals.
Metals can be easily shaped into wires. This property of metals is called ductility.
Metals can be easily shaped into thin flat sheets. This characteristic of metals is
called malleability.
Metals make a sound when struck with hard objects. Metals can be polished to a
shiny appearance. That's why gold and silver jewellery shine so much.
Iron reacts with atmospheric oxygen and moisture to form iron oxide, which is
commonly known as rust. Metals burn in the presence of oxygen to form metal
oxides, which are basic in nature.
For example, if you burn a strip of magnesium, magnesium will burn in oxygen
to form magnesium oxide.
Sodium reacts vigorously with water and oxygen, and produces so much heat
that it catches fire! That's why sodium is stored in kerosene - to prevent it from
coming into contact with moisture and oxygen.
Red litmus paper turns blue in solutions basic in nature. Lime juice contains
citric acid. Acids react with salts of metals.
Metals react with acids, such as hydrochloric acid and sulphuric acid, to give out
hydrogen gas.
Copper does not react with dilute hydrochloric acid even on heating, but it reacts
with dilute sulphuric acid on heating.
Metals react with bases, such as sodium hydroxide, to produce hydrogen gas.
More reactive metals can displace the less reactive metals in a compound.
For example, sulphur reacts with oxygen to form sulphur dioxide, which is
acidic.
Natural Resources
Resources supplied by nature are called natural resources. The sun, air, water,
soil, trees and forests, wildlife, coal, petroleum, natural gas and minerals are
all natural resources.
Many industries, like fishing, mining, hunting, agriculture and forestry, revolve
around the sensible use of natural resources.
Natural resources are classified as renewable and non-renewable resources.
Renewable resources are those that are present in unlimited quantity in nature
or those that will replace themselves over time.
These resources are not likely to be exhausted by human activities.
As they are unlimited, they are also called inexhaustible resources.
Non-renewable resources are those that are limited in nature and will not
replace themselves.
They can be exhausted by human activities.
As they are limited, they are also called exhaustible resources.
Coal, petroleum and natural gas are exhaustible fossil fuels, which cannot be
prepared in the laboratory. It takes millions of years for dead organisms to
get converted into these fuels.
Studies show that the known reserves of these fuels are fast depleting.
Burning of these fuels is also a major cause for air pollution and, along with
cutting down of trees, is contributing to global warming.
The Petroleum Conservation Research Association (PCRA) of India has some
tips for people on how to save petrol/ diesel while driving:
Coal
During the carboniferous age, the earth had large amounts of plant life and
dense forests in swampy and low-lying wetland areas. Plants and other life
forms, after their death, drifted down to the bottom of the swamps, where they
were compressed and decomposed to form peat. Coal was formed due to the
compression of the peat at high temperature and pressure.
As coal was formed from the remains of vegetation, it is called a fossil fuel.
Carbonisation is the slow process of conversion of dead vegetation into coal.
Uses of coal:
Resources occurring naturally are called natural resources. These are of two
types:
Coal:
It is black in colour.
It is solid like a rock.
It was used in railway engines as fuel in the olden days.
It is used in thermal power production.
It is used in various industries.
Millions of years ago, when forests got buried, the dead plants got converted into
coal due to the high pressure and temperature under the soil. This process of
conversion of dead vegetation into coal is called carbonation. Coal is formed from the
remains of vegetation, and hence, it is called fossil fuel.
Coal is processed in the industry to get different products like coke, coal tar, coal
gas, etc.
Coke:
Coal tar:
Coal gas:
Petroleum and natural gas are formed from compressed organic matter.
As petroleum and natural gas are lighter than water, the deposits of petroleum
and natural gas occur above that of water.
The first oil well in the world was drilled in Pennsylvania, USA.
Oil in India is found in Assam, Gujarat and Mumbai High, and in the river
basins of Godavari and Krishna.
Petroleum is a mixture of various constituents like petroleum gas, petrol,
diesel, lubricating oil, paraffin wax, etc., and the process of separating its
many constituents is called refining. It is refined in a petroleum refinery.
At the refinery, the crude oil mixture is 'fractionated' into different components
by fractional distillation.
Light gases are the topmost fraction, followed by petrol and kerosene. Diesel is
the heaviest. The other heavier fractions are not useful and are usually used to
make asphalt to surface roads.
Constituents of petroleum and their uses:
Burning petroleum releases carbon dioxide into the air, which contributes to
global warming.
Oil spills at sea are devastating to the animal and plant life in and around the
sea.
Natural Gases
Natural gas is another fossil fuel, like coal and petroleum. It is a non-
renewable fuel.
Natural gas is used for waste treatment and incineration. Gases like butane,
ethane and propane may be extracted from it and used as feedstock for products
such as fertilisers and pharmaceutical products
Natural gas is one of the most useful, clean and safe energy sources.
It is a colourless and odourless gas in its pure form, and is made up of many
It is one of the cleanest burning fuels and produces mostly heat, carbon dioxide
and water vapour. Thus, it is said that it contributes to a cleaner and greener
environment.
Natural gas is odourless. To detect gas leaks, a harmless but pungent odorant
that smells like rotten eggs is added to it, as a safety measure. It can be smelt
in case of even a small leak.
CNG is also distributed to homes and industries through pipes, For example, in
India, such a network of pipelines exists in Vadodara in Gujarat and some parts
of Delhi. CNG is now used as a fuel for transport vehicles - from light duty
trucks, auto rickshaws and taxi cabs to delivery vans and heavy duty vehicles
like buses.
Combustion
The chemical process in which a substance reacts with oxygen to give off heat is
called combustion.
A substance that undergoes combustion is called a combustible substance, or a
fuel.
Liquefied Petroleum Gas or LPG burns very quickly producing a lot of heat. This
is called rapid combustion.
When white phosphorous is left out in the open at room temperature for some
time, it burns all by itself. This is called spontaneous combustion.
Forest fires and fires in coal mines are because of spontaneous combustion.
The burning of crackers produces a large amount of heat, light and sound
because of chemical reaction. This type of combustion is called explosion.
Without oxygen, even a combustible substance will not burn.
Temperature is an important condition for combustion to occur.
The lowest temperature at which a substance catches fire is called its ignition
temperature.
Kerosene is a fuel that has a low ignition temperature.
A low ignition temperature means the substance will catch fire quickly and is
highly inflammable. Some inflammable substances are petrol, LPG, ether and
alcohol.
Fire can be easily stopped by stopping the supply of either air or heat.
Water is not a good extinguisher for electrical fires. If electrical wiring is on
fire, pouring water on it will conduct the electricity through the water and may
cause the person dousing the fire to be electrocuted.
As water is heavier than petrol, it is not useful for extinguishing oil or petrol
fires. For electrical and oil fires, it is best to use carbon dioxide as an
extinguisher. Carbon dioxide is heavier than oxygen, so it covers the flame
like a blanket, cutting off contact between the fuel and oxygen. Powder of
sodium or potassium bicarbonate can also be used to get carbon dioxide.
The first automatic fire extinguisher was patented in England by a celebrated
chemist called French C. Hopffer.
The modern fire extinguisher was invented by British Captain George William
Manby.
Flame
Kerosene oil and molten wax are substances that give a flame while burning.
Wood and charcoal are substances that do not vaporise, but still burn, without
any flame.
A luminous flame is a bright yellow flame that gives off light. A luminous flame
undergoes incomplete combustion as it does not get the oxygen that it requires.
There are several "zones" within a non-luminous flame, and each zone has a
different temperature
The outermost zone of the flame is blue in colour and it is the hottest part. This
is due to complete combustion.
The middle zone is moderately hot and is yellow in colour. This is because of
partial combustion.
The innermost zone is the least hot and black in colour. This is due to the
presence of unburned wax vapours.
Fuel
Fuel is any material that is burned to obtain energy that can be used to heat or
move another object. Fuel releases energy through a chemical reaction known
as combustion.
A good fuel must:
Be readily available.
Be cheap.
Burn easily at a moderate rate.
Produce a large amount of heat.
Not leave behind any undesirable substances.
Unburned carbon particles released when carbon fuels like wood, coal and
petroleum burn, cause pollution and respiratory diseases such as asthma.
Air Pollution
Substances that cause harmful changes in the air are called pollutants. Air
pollution is caused due to the presence of pollutants in the air.
Air pollution is caused by burning fossil fuels, like coal and petroleum, in
industries, power plants and vehicles, and by burning of firewood and dung
cakes. Pollutants are also released into the air by natural events like a dust
storm, forest fire or volcanic eruption.
Incomplete burning of fossil fuels, like petrol and diesel, results in the
production of colourless, odourless and toxic carbon monoxide gas.
Smog is a mix, in the air, of smoke and chemicals with fog.
The chemical components of smog can include ozone, sulphur dioxide,
nitrogen dioxide and carbon monoxide.
Smog can trigger breathing difficulties like asthma and coughing.
Pollutants like sulphur dioxide and nitrogen dioxide are released in large
quantities by petroleum refineries.
These emissions can cause respiratory problems and also permanent lung
damage.
CFCs or chlorofluorocarbons are synthetic products that contain carbon,
chlorine and fluorine. They were formerly used as a refrigerant and as a
propellant in aerosol or air sprays.
Soot is released when automobiles burn fossil fuels, like petrol and diesel.
Pollutants like sulphur dioxide and nitrogen dioxide, which are produced by
industries like rubber processing, automobile chemicals and the Mathura oil
refinery near Agra, are responsible for the decolourisation of the Taj Mahal.
These gases react with water vapour in the atmosphere and form sulphuric acid
and nitric acid. Precipitation carries these acids back to the earth as acid rain.
The corrosion of the Taj Mahal due to acid rain is called 'marble cancer.'
Global warming has already started melting the polar ice caps, which has
resulted in a rise in the global sea level.
Gases, like methane, nitrous oxide and water vapour, also contribute to the
greenhouse effect, and, along with carbon dioxide, are collectively called the
greenhouse gases.
Steps to prevent air pollution:
Water covers two-thirds of the earth's surface and makes up 75 per cent of the
human body.
A water body is said to be polluted when toxic substances damage it, making it
undrinkable and also dangerous for organisms to live in it.
Harmful substances, like sewage, silt, toxic chemicals and domestic waste,
are called water pollutants. They spoil the quality of water by altering its smell
and colour, and render it unfit for drinking.
Pollution can enter a body of water in many ways, such as domestic sewage,
agricultural run-off containing fertilisers and pesticides, eroded soil, acid
rain, chemicals released from industries or other wastes from cities and
towns.
At places along the Ganga, people bathe, wash clothes and even defecate in the
water. They also throw huge quantities of garbage, flowers, idols of gods and
goddesses, untreated sewage, animal carcases and non-biodegradable
polythene bags directly into the river.
Contaminated water destroys aquatic life and reduces its reproductive ability.
Reduce, reuse and recycle is a popular mantra and one that is so important for
us to practise.
Steps to conserve water:
Crop Protection
Food Preservation
Nitrogen Fixation
Agriculture
The term crop is used to describe plants of the same kind that are grown and cultivated at one
place in significant quantities. Plants that are planted during the rainy season are called kharif
crops. Crops that grow during the winter season are called rabi crops.
Many activities are performed before cultivating a crop, which are termed as agricultural
practices. Soil preparation means loosening the soil or turning it. Earthworms decompose
plant and animal waste, and thereby benefit the soil by increasing the humus and nutrient level in
it. Ploughs have been in use since ancient times for tilling soil, adding manure and fertilisers, and
for scraping of soil. Depending upon the animals available on a farm, ploughing is done using
horses and camels to pull ploughs. A plank is used to break the crumbs into fine soil. The next
step is to level the soil with the help of a leveller.
Ploughs were made from wood. Nowadays, iron ploughs have become more popular. Earlier, a
hoe was used for tilling, but these days we use it only to remove weeds. When the cultivator is
pulled by a tractor, the teeth assist in breaking the soil.Healthy seeds contain more
nutrients.Damaged seeds are hollow, discoloured and contain fewer nutrients.
Seed selection is done by soaking the seeds in a beaker containing water.Modern seed drills sow
seeds at a proper depth and distance, and cover them with a layer of soil, keeping them well out
of a bird's reach. The traditional seed drill contains a funnel-shaped container, from where the
seeds pass and get placed into the soil. Bananas are first sown in a nursery and the saplings are
planted in the field.
Plants that are planted during the rainy season are called Kharif crops. The term Kharif means
"autumn" in Arabic. Crops that grow during the winter season are called Rabi crops. The term
Rabi means "spring" in Arabic.
Ploughs have been in use since ancient times for tilling soil, adding manure and fertilisers, and
for scraping soil.
A plank is used to break crumbs into fine soil. The next step is to level the soil with the help of a
leveller.
Earlier, a hoe was used for tilling, but these days, we use it only to remove weeds. Weeds are
plants that grow where they are not wanted. They grow in the fields where they compete with
When the cultivator is pulled by a tractor, the teeth assist in breaking the soil. Cultivate means
preparing the soil for growing crops, breaking the surface soil around to destroy weeds, use the
soil or land for growing crops, to grow crops from seeds, shoots, etc., or to improve or develop
plants by various horticultural techniques.
Healthy seeds contain more nutrients. Seed health refers to the absence of disease-causing
organisms such as fungi, nematodes, bacteria, viruses and insects.
Seed selection is done by soaking seeds in a beaker containing water. Seed selection is aimed at
obtaining healthier seeds. It can also be used to maintain and improve the quality of the crop
variety. Plants can be reserved for obtaining seeds for growing the next crop. In this way, the
farmer can slowly improve the quality of his crop. The selection of plants may be based on
characteristics such as the size of the plant, the colour or size of the fruits, the number of grains
per ear, etc. However, selection can also be done to keep the seeds of the plants that suffered
fewer attacks by insects or disease. In this way, the farmer will select at harvest time the best
seeds to be kept aside for the next season. For sowing, only the very best seeds should be used.
The traditional seed drill contains a funnel-shaped container, from where seeds pass and get
placed into the soil.
Crop Protection
Wells, tube wells, ponds, lakes, rivers, dams and canals are sources of water. Sprinklers and
drip systems are used when the soil is sandy or uneven. Pumps lift water and run on biogas or
solar energy. During summer, it is difficult for farmers to water crops. Weeds are removed
manually before they produce flowers and seeds. Weeds are controlled by chemicals such as 2,
4-D, a systemic weedicide that kills weeds. Weedicides are poisonous to humans. Drip irrigation
waters fruit plants and suits regions that have scarcity of water. Khurpi is used to remove
weeds. Farmers use weedicides in diluted form and they handle weedicides carefully by
covering their nose and mouth while spraying. This stops their propagation in the field. Tilling
the soil uproots the weeds.
Cutting the crop after it has ripened and gathering the grains is known as harvesting. We can use
the word crop ripened rather than using the word crop mature. A sickle has a sharp serrate-
edged metal blade attached to a wooden handle. A sickle is used for cutting the crop. A harvester
The fan in a winnowing machine blows away the chaff. Protection of crops against
microorganisms, rodents, pests and moisture is done by drying in sun and exposing to fumes.
Silos are huge, air-tight cylindrical structures used to store grains. Granaries are large rooms
built above ground level to prevent rodents and pests from getting near the grains. In cold
storage, vegetables and fruits are stored at low temperatures. Animal husbandry means rearing
and breeding livestock on a large scale. Poultry farming means rearing hens, ducks and turkey
for meat and eggs.
It'll be exciting to learn about microbes because we humans have microbes in our bodies, too.
Living organisms invisible to the naked eye are called microorganisms. Some microbes can be
seen on bread with the help of a magnifying glass, while others are visible only under a
microscope. Microorganisms are everywhere, in the air, water and soil. Bread mould belongs
to the fungi group. Microbes can be classified into four groups - bacteria, fungi, algae and
protozoa.Cold and influenza (flu) are caused by viruses. Serious diseases like polio and
chicken-pox are also caused by viruses.Viruses need to be inside a living organism to reproduce.
Hence, viruses form the boundary between the living and the non-living world. An amoeba is a
free living organism. Microbes can survive under all types of environment, ranging from ice
cold climate to hot springs and deserts to marshy lands.
Microorganisms made of single cells are called unicellular organisms. Most fungi and some algae
are made up of many cells, and are called multicellular organisms. Milk is turned into curd by
the action of Lactobacillus. Microbes are used in the preparation of cake and bread. Yeast
reproduces rapidly in dough and produces carbon dioxide. This dough, when baked, yields
porous and spongy cakes. Microbes are also used to prepare pickles, cheese and alcohol.
Bacteria clean up organic waste and decompose them into usable substances. Louis Pasteur
discovered the process of fermentation. The process of converting sugar into alcohol is called
fermentation. Yeast convert the natural sugars present in grains into alcohol. Wine is produced
by the process of fermentation.
It is exciting to see Vex explaining about disease-causing microbes, which are called
pathogens.Microbes spoil leather, clothing etc.Some more information was given on the
transmission and spread of diseases.Female mosquitoes carry the pathogens for diseases like
malaria and dengue, and spread infection from one person to another.By using a handkerchief
while sneezing or coughing, we can prevent the spread of infection.Infections are transmitted
from animals to humans by eating uncooked chicken.Human diseases like cholera, common
cold, chicken pox and tuberculosis spread from an infected person to a healthy person through air,
water, food or physical contact.Microbial infection can be transmitted by direct contact with an
infected person or animal, or by eating meat prepared from an infected animal.To prevent
microbial infection in animals, antibiotics are mixed with the feed of livestock and poultry.Many
pathogens attack crop plants like sugarcane, wheat, rice, potato and orange, and reduce their
yield.Antibiotics, insecticides and pesticides are sprayed in the field to control many plant
diseases.Anthrax, caused by a bacterium, is a dangerous human and cattle disease.
The foot and mouth disease in cattle is caused by a virus.Antibiotics are used to cure a variety
of diseases caused by fungi, bacteria and protozoa, but antibiotics are not effective against
diseases caused by viruses.We should take antibiotics only on the advice of a qualified doctor.
Medicinal use of microbes- Bacteria or fungi produce a specific chemical that prevents the
growth of or kills microbes that cause disease.Penicillin was discovered by Alexander Fleming
in 1929.Inactivated or weakened microbes introduced into the body are called a vaccine.When
disease-carrying microbes enter our body, it produces self-protecting proteins called antibodies,
to fight against the invader.Small pox has been completely eradicated from the world. Several
diseases, including cholera, tuberculosis and hepatitis, can be prevented by vaccination.
Food poisoning may cause infection.We need to store our food properly as food poisoning can
cause serious illness and even death.Spoiled food emits a bad smell, has a bad taste and changes
colour.Chemical methods of preservation of jams and squashes use preservatives like sodium
benzoate and sodium metabisulphite. Common salt absorbs moisture from food, making it
dry and uninhabitable for microbes.Sugar reduces moisture in food, which inhibits the growth of
microbes that spoil food.
Jams, jellies and squashes are preserved using sugar. Bacteria and fungi cannot live in an
environment of oil and vinegar.Louis Pasteur discovered the process of pasteurisation.During
pasteurisation, milk is first heated to about 70 degrees Celsius for 15 to 30 seconds and then
suddenly chilled.Sudden chilling of milk is done during pasteurisation to prevent the growth of
microbes.Boiling and freezing are the two other methods used to preserve food.
Nitrogen Fixation
Nitrogen from the atmosphere is fixed by biological nitrogen fixers like blue green algae and
some bacteria.Fungi are decomposers that degrade organic waste compounds into simple
substances, ready for reuse by plants.The circulation of nitrogen between organisms and the
atmosphere is called the nitrogen cycle.Some microorganisms reside in the root nodules of
leguminous plants and fix nitrogen from the air into the soil, and increase soil fertility.Nitrogen is
also fixed by lightning to a small extent.Microorganisms in soil decompose harmful and smelly
substances, leading to a cleaner environment.
Deforestation is the clearing of forests to use the land for cultivation, building houses and
factories, making furniture, and the construction of dams, or for using wood for fuel.Cases
where human beings are responsible for deforestation are known as man-made causes, while
cases such as forest fires are known as natural causes.Other causes of deforestation include
forest fires, severe floods and severe droughts.For the survival and well-being of the human
species, a vast variety of plants and animals exist on the earth.
A consequence of deforestation is global warming that has a severe impact on the
environment.Reforestation means planting new trees in destroyed forest area.Carbon dioxide
released into the atmosphere traps sunlight reflected by the earth's surface, and results in an
increase in temperature levels on the earth.
This increase in the temperature levels is called global warming.It is advisable to replant trees
of the same species that are found in a forest.In India, we have the Forest Conservation Act,
which is aimed at preserving and conserving natural forests.Significance of the recycling process
of paper - Used paper is sent back to the factories for recycling, after the recycled paper has been
used, the amount of waste paper being disposed off would be much lesser.It takes 17 fully grown
trees to make one tonne of paper.Even harmful chemicals are used in making paper.Trees are
cut down and the wood is taken to a paper factory for producing paper.The paper that is
produced is then sent to towns and cities for use.
Endemic species found in the Nilgiri Biosphere Reserve are Nilgiri langurs, great Indian horn
bills, thorny costers, blue mormons etc.Endangered species or threatened wild animals in the
Waynad Wildlife Sanctuary are the black buck, marsh crocodile, python, etc.Killing or
poaching of animals is prohibited in the Waynad Wildlife Sanctuary.The only way to protect
these animals from extinction is by increasing awareness.Project Tiger is a government
initiative, launched to ensure the survival of the tiger population.Information about endangered
species is recorded in the Red Data Book.A number of birds migrate to the Vedanthangal Bird
Sanctuary.When natural habitats are not conducive for breeding, birds move to safer areas to
breed, which is called migration.Birds that fly from far-off places to reach a new habitat are
known as migratory birds.
Introduction to Cells
With the help of a microscope, an English scientist, Robert Hooke, first discovered the existence
of cells in 1665.Scanning electron microscopes are used to examine the external parts of various
organisms.The transmission electron microscope is used to view the internal structure of a cell
and its organelles.Organisms that are made up of a single cell and perform all their vital activities,
like reproduction, locomotion and digestion, are called unicellular organisms.Organisms that are
made up of more than one cell are called multicellular organisms.Amoeba uses small finger-like
projections called pseudopodia for locomotion and to capture prey.Paramecium is a single cell
and is built in such a way that it performs all its vital activities, like reproduction, locomotion,
digestion, and so on. The White Blood Corpuscle (WBC) is the only animal cell that changes its
shape.The branched structure of a neuron helps it to transfer messages to all parts of the body.
A microscope is an instrument used to see objects too small for the naked eye. An English
scientist, Robert Hooke, discovered the existence of cells in 1665.Heis known for his book
Micrographia, and for first using the word "cell" to describe the basic unit of life.
The transmission electron microscope (TEM) is used to view the internal structure of a cell and
its organelles. TEM is a microscopy technique in which a beam of electrons is transmitted
through an ultra-thin specimen, interacting with the specimen as it passes through it. An image is
formed from the interaction of the electrons transmitted through the specimen; the image is
magnified and focused onto an imaging device, such as a fluorescent screen, on a layer of
photographic film, or to be detected by a sensor, such as a CCD camera.
Organisms that are made up of more than one cell are called multi-cellular organisms. Most life
that can be seen with the naked eye are multi-cellular, as are all animals and plants.
Paramecium is a single cell, and is built in such a way that can perform all vital activities, like
reproduction, locomotion, digestion, and so on.
The branched structure of a neuron helps it transfer messages to all parts of the body. A neuron,
also known as a nerve cell, is an electrically excitable cell that processes and transmits
information by electrical and chemical signalling.
The black layer or the scab that you see on the wound is a result of the aggregation of dead Red
Blood Cells (RBCs).The nose and the lungs form part of an organ system, the respiratory
system.All organ systems work together to form a complex organism. The cytoplasm is a jelly-
like fluid present between the nucleus and the cell membrane.The cell membrane allows the
movement of minerals and other substances in and out of the cell.The nucleus controls the
activities of a cell.Methylene blue is the stain placed on plant and animal cells to differentiate the
nucleus under a microscope.Chromosomes are called vehicles of heredity because they carry
genes and help in the inheritance or transfer of characteristics from the parents to the offspring.
Bacteria and blue-green algae that contain nucleoids are called prokaryotes.Organisms that have
a well-organised nucleus are called eukaryotes.The nuclear material in unicellular organisms
does not contain a nuclear membrane, and hence is called a nucleoid.The nucleolus is a small,
spherical body in the nucleus.Chloroplast is a type of plastid involved in photosynthesis in
plants.A vacuole is present in both plant and animal cells, but it looks much smaller in animal
cells.
The human respiratory system consists of the nostrils, nasal passage, internal nares, pharynx,
larynx, trachea, bronchi, bronchioles and alveoli. Alveoli are the functional units of the lungs.
All organ systems work together to form a complex organism. Organ systems include the
digestive system, respiratory system, circulatory system, excretory system and nervous system.
The cell membrane is a biological membrane that separates the interior of all cells from the
outside environment. The cell membrane is selectively permeable to ions and organic molecules
and controls the movement of substances in and out of cells. It consists of the phospholipid
bilayer with embedded proteins. Cell membranes are involved in a variety of cellular processes,
such as cell adhesion, ion conductivity and cell signalling, and serve as the attachment surface for
extracellular material and intercellular cytoskeleton.
Methylene blue is the stain placed on plant and animal cells to differentiate the nucleus under a
microscope. Solutions of this substance are blue when in an oxidising environment, but will turn
colourless if exposed to a reducing agent.
Bacteria and blue-green algae that contain nucleoids are called prokaryotes.
The nucleoid is an irregularly-shaped region within the cell of prokaryotes, which has nuclear
material without a nuclear membrane.
Amoeba and bacteria adopt the asexual mode of reproduction.Reproductive organs in humans
produce gametes - eggs and sperms.A zygote is formed by the fusion of an egg and a sperm.The
male reproductive organs include a pair of testes, two sperm ducts, and a penis.Sperms have a
head, a middle piece and a tail.Sperms contain cell membrane, cytoplasm and nucleus.The
female reproductive organs consist of a pair of ovaries, two oviducts, also called fallopian
tubes, and the uterus.The ovary produces female gametes called ova or eggs.During pollination
in plants, the male gamete fuses with the female gamete.The nuclei of the sperm and the egg fuse
to form a zygote, and the process is called fertilisation.An organism inherits some
characteristics from the egg and some from the sperm.Copulation is the act in which a male
reproductive organ enters the female reproductive tract.
When male and female gametes unite outside the body, it is called external fertilisation.When
fertilisation takes place inside the body, it is called internal fertilisation.When fertilisation takes
place in a test tube, the offspring are called test tube babies.Fertilisation that takes place outside
the human body is in vitro fertilisation.Super cell - the zygote, marks the beginning of a new
individual.The zygote divides repeatedly to form a ball of cells, which, in turn, develops into
tissues and organs of the body.The development of the embryo takes place in the mother's
uterine wall.All parts of the body start developing in an embryo, called foetus.
Oviparous animals undergo external fertilisation, while viviparous animals undergo internal
fertilisation.The zygote undergoes rapid division after fertilisation and moves down the
oviduct. During this period, many protective layers form as a hard shell around the developing
embryo.The chick hatches from the egg after three weeks.
There are three distinct stages in the life cycle of a frog - egg, tadpole and adult.In the first
stage, the egg fuses with a sperm to form a zygote. The zygote further divides to form an early
tadpole, which matures into a late tadpole.During metamorphosis, the larva transforms into
an adult frog.Our bodies undergo certain changes as we develop from childhood to adolescence
stage.
In asexual reproduction, only one parent is involved.Binary fission involves the splitting of an
organism into two.Amoeba is a simple, unicellular organism.Reproduction in amoeba begins
with the division of the nucleus.The parent organism divides into two individual organisms is
fragmentation or binary fission.Bulges that appear as outgrowths on hydra are called buds.
A mammary gland cell of the Finn Dorsett sheep species and an enucleated cell of the
Scottish Blackface ewe were subjected to an electric pulse to cause fusion, thereby resulting in a
fertilised egg that developed into a zygote.The embryo was implanted into the uterus of the ewe
to undergo rapid cell division to form a foetus.Offspring inherit characteristics from both the
parents.Dolly received all the genetic information from the Finn Dorsett sheep.Dolly produced
several offspring.Cloning involves certain abnormalities.Dolly suffered from arthritis.Cloning
could impact mental development.Advocates of human therapeutic cloning believe that
cloning could help in producing organs for transplantation and in regenerative medicine.
After the age of ten years, an individual becomes an adolescent, and experiences a lot of physical
changes in the body. Adolescent is a general term for teenagers of both sexes. Adolescence is the
period of life between the onset of puberty and reaching adulthood, that is, the period that leads
to reproductive maturity. An increase in height is the most apparent physical change during
puberty. Exercise and eat healthy food to gain height faster. Everyone will not have the same rate
of increase in height, as the height of individuals is controlled by the genes inherited from
parents. During adolescence, the body shapes of boys and girls also change an increase in their
heights. The larynx or voice box in boys grows during puberty and protrudes out, making it
clearly visible, and is commonly called Adam's apple. During puberty, sweat glands become
active and start producing more sweat. During puberty, pimples or acne appear due to increased
action of sebaceous glands or oil glands.
During puberty, the sex organs grow and become functionally active. The testes start producing
male gametes, called sperms. During puberty, the ovaries grow and result in the maturation of
the ovum. There is an increase in size of the penis with respect to different ages in males.
Adolescents may experience mood swings during puberty. Puberty also results in mental and
intellectual maturity. During puberty, the brain is very active and so will have a greater
capacity to learn. Adolescence is the period of life that leads to reproductive maturity, making a
person capable of reproduction. The growth of facial hair, that is, the beard and moustache, is a
secondary sexual characteristic visible during adolescence. Puberty is marked by the development
of breasts in girls Secondary sexual characters are used to distinguish a male from a female.
Hormones are chemical messengers that regulate most functions in the human body. Endocrine
glands or ductless glands secrete hormones directly into the bloodstream. Sex hormones control
the onset of puberty and initiate the reproduction function. Body changes such as the growth of
facial hair and cracking of voice, are initiated due to the secretion of testosterone. Body changes
in females during puberty, such as breast development, are initiated by estrogen. At puberty, the
level of sex hormones is sufficient to bring about the maturation of gametes, sperm and ovum.
The reproductive phase of life lasts longer in males than in females. Menarche is the first
occurrence of menstruation. The shedding of the uterine thickening along with its blood vessels is
menstruation.
Menopause is the stoppage of menstruation. Fertilisation is the fusion of a sperm and an ovum.
The menstrual cycle takes place every 28-30 days. Sex chromosomes in sperms determine the
baby's gender. Humans have 23 pairs of chromosomes in each cell.
A gamete is a mature reproductive cell - a sperm or an ovum. Gender determination of an
unborn baby is considered illegal in India. Goitre is caused by the enlargement of the thyroid
gland. Insulin deficiency causes diabetes. The thyroid gland produces thyroxine and
calcitonin. The adrenal glands secrete adrenalin. The pituitary gland is the master gland and
controls all the endocrine glands. The life cycle of the silk moth is controlled by insect hormones.
Thyroxine is responsible for metamorphosis of the larva or tadpoles into adult frogs.
Adolescents need to avoid junk food. A balanced diet contains nutrients like carbohydrates,
proteins, fats, vitamins, minerals and water in the right proportions. Healthy foods have more
nutritional value, whereas junk foods have no or little nutritional value.
A person with complete physical and mental health is termed a healthy individual. Personal
hygiene is the first step in maintaining health. Cleanliness - Cleaning of private parts is important
to prevent possible infections. Many myths and taboos about menstruation and pregnancy
prevail in society. Body parts such as hair, skin, nails and feet are vulnerable to bacterial and
fungal infections, if we don't keep them clean. The activity of sweat glands increases in puberty
and makes the body smell. Physical exercise keeps your body fit and healthy. Sweating helps
you to release toxins and wastes from your body.
Outdoor games and exercise in addition to indoor games will help you build a healthy, muscular
body. A lot of people take anabolic steroids to increase body mass, but it has dangerous side
effects. Peer pressure is best addressed by self confidence and a healthy lifestyle. During
adolescence, with drastic changes taking place in the body and mind, you might feel insecure
and confused. Drugs are addictive and should only be taken under prescription of a physician.
AIDS is caused by a virus called HIV. AIDS can be transmitted from an infected person to a
healthy person by sharing syringes used for injecting drugs. Pregnancy occurs only by sexual
contact. In India, the legal age for marriage is 21 years for a boy and 18 years for a girl.