Академический Документы
Профессиональный Документы
Культура Документы
COMPRE 3
PROBLEM SET NO. 2
Mid-Term
Score:
1. Design a cantilever projecting out from a room slab extending 1.0m and to be used as balcony
(LL = 300 kg/m²). A brick wall of 250 mm thickness including plaster of 1.0m height is provided
at the end of cantilever fc’ = 17.25 MPa, fy = 300 MPa, Slab thickness of room = 125 mm. Slab
bottom steel in the direction of cantilever is 13mm diameter RSB @ 190 mm center to center
spacing. In determining load, consider all weight that may occur. Use 75mm thick for brick
ballast and 60mm for floor finishes.
2. Design a rectangular tied and spiral column to accept the following service dead and live loads.
Ignore length effects. (Including bar and ties)
PDL = 630 KN Fc’ = 27.60 MPa
PLL = 950 KN Fy = 414 MPa
Prepared By;