Академический Документы
Профессиональный Документы
Культура Документы
Hydraulic Catalogue
and Price Book
ISO 9001:2000
2005
Prix en effet le 1 juin, 2005
Prices in effect June 1, 2005
Supercedes any and all hydraulic catalogues
011075:5085 provided by Stellar Industrial Sales.
Stellar Industrial Sales Ltd. Hydraulic Price Book
COMMAND MINIMALE 50.00$ NETTE TAXES DE VENTE: TOUTES LES TAXES EN SUS
CONDITIONS D’ENVOI: F.A.B. NOTRE ENTREPÔT. TERMES: 30 JOURS NETS, COMPTES AGRÉES
CONDITIONS DE VENTE: “L’acheteur accepte les dispositions suivantes:”
a) “Le vendeur ne sera pas tenu au versement de dommages. Non plus sera-t-il considéré par défaut à cause d’un manque ou un retard dans l’envoi de la totalité ou n’importe
quelle partie de cette commande, occasionnée par la guerre, le feu, le déluge, une grève, une grève patronale, un ou des accident(s), une catastrophe naturelle, un ordre ou
une exigence gouvernementale, l’interruption ou le manque de matériaux ou des aménagements de transport ou bien d’autres raisons ou autres circonstances semblables ou
autrement, circonstances indépendants de notre volonté “
b) Le vendeur peut refuser ci-dessous de livrer les marchandises à moins qu’il soit payé en argent comptant, si n’importe quand, la compagnie n’est pas satisfaite concernant le
crédit ou le sens des responadilités d’un certain client.
GARANTIE: “Le vendeur garantie la marchandise décrite contre les défauts originels dans les matériaux ou dans la fabrication pendant (un an) depuis la date de l’envoi de la
marchandises à condition que:
a) Les marchandise sont utilisées, actionnées et entretenues d’une manière compétente et normale par l’acheteur et conformément aux instructions du vendeur.
b) La responsabilité du vendeur sous la garantie sera limitée aux remplacements ou aux réparations de marchandises défectueuses sans frais à l’acheteur ou bien, au choix du
vendeur, un remboursement du prix d’achat, moins, n’importe quel ajustement de prix, pour le service rendu par la marchandise(s) défectueuse(s).
c) Toute garantie explicite ou sous-entendu que les marchandises sont adéquates pour un usage précis est, par ces présentes, annulée.
d) En ce qui concerne les marchandise qui ne proviennent pas de la manufacture du vendeur, cette garantie s’appliquera seulement dans la mesure où le vendeur pourra faire
valoir une réclamation de responsabilité contre le fabricant de celles-la.
e) L’acheteur donnera avis par écrit au vendeur tout de suite après la découverte de n’importe quel défaut et après cela se servira de la marchandise à ses propres risques et
périls.
f) Le vendeur ne sera pas tenu responsible pour des dommages indirects provenant de l’installation ou de l’usage de la marchandise.
g) Cettes garantie remplace toutes autres garantie implicites ou statutaires.
RÉCLAMATIONS: Notre responsabilité cesse quand la marchandise est livrée à la compagnie de transport et nous possédons un reçu d’expédition; faites votre réclamation à la
compagnie de transport pour des dommages, aussi bien dissimulés qu’apparents, et avertissez-nous.
RETOURS: Les retours seront acceptés sous les conditions suivantes:
a) Le produit doit être un article en magasin, de première qualité prêt pour la revente. Les longueurs qui ne sont pas de mesures “ standards” ne doivent pas être retournées,
pour aucune raison!
b) Les articles en caoutchouc ne peuvent pas être retournés si la date de vente est de trois mois, à cause d’un manque de controle sur les conditions d’emmagasinage et
d’approvisionnement. (L’emmagasinage près des sources de chaleur, des sources d’ozone ou bien de l’exposition directe à la lumière ultra-violette ont tous un effet néfaste
sur le caoutchouc et ce produit peut causer un danger si l’on s’en sert après qu’il soit mal entretenu.
c) Il y a des frais de 20% pour le réapprovisionnement et il y a aussi des frais pour renvoyer la marchandise port payé (si c’est le cas). Et, ces frais seront déduits des crédits
accordés qui accompagnent une commande d’au moins 50.00$.
d) Aucuns retours seront acceptés sans une autorisation au préalable et un numéro valide qui autorise le retour de la marchandise (arm ou RGA).
e) Tous les articles doivent être retournés, le transport payé d’avance.
DÉNÉGATION: Les documents publiés à l’époque de la publication initale reflètent toutes les conceptions, dimensions et données de performances actuelles. Cependant,
conformément à notre politique de production de nouvelles versions de produits de manière continue, la modification pourrait résulter en des changements de conceptions,
de dimensions et de données de performances que ne sont pas imprimés dans ces document. De plus, les pressions de fonctionnement et d’autres informations techniques
ont été préparées pour des résultats d’essais véritables et pour d’autres données fiables. Toutefois, on ne peut supposer aucune responsabilité quant à la précision de ces
informations dans des conditions différentes sur le terrain; elles devraient être considérées uniquement comme recommandations et non comme une garantie.
Thread Guide
American Dryseal Pipe Threads (NPTF and NPSM) British Standard Pipe - BSP (BSPP Parallel & BSPT Tapered)
This commonly used connection incorporates two methods of sealing. The The British BSP connections include two types of threads, BSPP which
male NPTF (Dryseal) tapered thread will mate with the NPTF tapered female, are straight (or parallel) and BSPT which are tapered. The BSPT tapered
which is usually a port and seal when the special threads are crushed together. male will mate with a BSPT tapered female (usually a port) and seals on
Male NPTF (Short Dryseal) are identical to male NPTF threads except that the the threads. The BSPP parallel male has a 30° chamfered seat which
thread lengths have been shortened by one full thread from the small end of seals with a BSPP swivel female on its 30° cone seat. (Similar to the
the taper. Additional sealing aids such as pipe dope and Teflon tape are often American NPSM-NPTF connection, however the BSPP swivel female
used with these threads. If the male has a 30° seat it will mate with the 30° end is commonly found on couplings.) The BSP threads are similar to,
cone seat in the NPSM straight thread swivel female, usually found on adapters, but not interchangeable with American NPTF pipe threads. The thread
and is mechanically held together by the threads. NPTF and NPSM are not pitch is different in most sizes, and the thread angle is 55° instead of
interchangeable with the British pipe threads. 60° angle found on NPTF and NPSM threads.
Dash Inch Thread Male thread Female thread Dash Inch Thread Male thread Female thread
OD OD OD OD
Size Size mm in mm in Size Size mm in mm in
2 1/8 27 10.3 0.41 9.4 0.37 2 1/8 28 10.3 0.41 9.4 0.37
4 1/4 18 13.7 0.54 12.4 0.49 4 1/4 19 13.7 0.54 12.4 0.49
6 3/8 18 17.3 0.68 15.7 0.62 6 3/8 19 17.3 0.68 15.7 0.62
8 1/2 14 21.6 0.85 19.3 0.76 8 1/2 14 21.3 0.84 19.3 0.76
12 3/4 14 26.9 1.06 24.9 0.98 10 5/8 14 22.9 0.90 21.1 0.83
16 1 11.5 33.8 1.33 31.5 1.24 12 3/4 14 26.9 1.06 24.9 0.98
20 1-1/4 11.5 42.4 1.67 40.1 1.58 16 1 11 33.3 1.31 31.5 1.24
24 1-1/2 11.5 48.5 1.91 46.2 1.82 20 1-1/4 11 42.2 1.66 40.1 1.58
32 2 11.5 60.4 2.38 57.9 2.28 24 1-1/2 11 48.3 1.90 46.2 1.82
32 2 11 60.4 2.38 57.9 2.29
SAE J514, 37° Flare (JIC) SAE J514, Straight Thread O-Ring Boss (ORB)
Commonly referred to as 37° JIC, this connection is widely used in This straight thread connection uses the same threads as the JIC 37°
hydraulic systems. When the straight threads are engaged, the 37° male shown above. However the 37° flare has been removed and an o-ring
seat seals on the 37° female flare seat. Most thread sizes are identical to has been added. When mated with a female o-ring boss port the o-ring
the 45° SAE connection as noted (*) below. Care must be taken not to is trapped in a special tapered counter bore to affect the seal.
confuse these two connectors, which have different seat angles.
Dash Inch Thread Male thread Female thread Dash Inch Thread Male thread Female thread
OD OD OD OD
Size Size mm in mm in Size Size mm in mm in
2 1/8 24 7.9 0.31 6.9 0.27 2 1/8 24 7.9 0.31 6.9 0.27
3 3/16 24 9.6 0.38 8.6 0.34 3 3/16 24 9.6 0.38 8.6 0.34
4 1/4 20 11.2 0.44 9.9 0.39 4 1/4 20 11.2 0.44 9.9 0.39
5 5/16 20 12.7 0.50 11.4 0.45 5 5/16 20 12.7 0.50 11.4 0.45
6 3/8 18 14.2 0.56 12.9 0.51 6 3/8 18 14.2 0.56 12.9 0.51
8 1/2 16 19.0 0.75 17.0 0.67 8 1/2 16 19.0 0.75 17.0 0.67
10 5/8 14 22.3 0.88 20.3 0.80 10 5/8 14 22.3 0.88 20.3 0.80
12 3/4 12 26.9 1.06 24.9 0.98 12 3/4 12 26.9 1.06 24.9 0.98
14 7/8 12 30.2 1.19 27.9 1.10 14 7/8 12 30.0 1.18 27.7 1.09
16 1 12 33.3 1.31 31.0 1.22 16 1 12 33.3 1.31 31.0 1.22
20 1-1/4 12 41.4 1.63 39.1 1.54 20 1-1/4 12 41.4 1.63 39.1 1.54
24 1-1/2 12 47.7 1.88 45.5 1.79 24 1-1/2 12 47.7 1.88 45.5 1.79
32 2 12 6.35 2.50 61.2 2.41
JIS 30° O-Ring Face
This Japanese connector is similar to American 37° JIC flare except for This connection is designed for leak-free use to 6000 PSI. The 0-ring
the 30° seat angle. The straight (parallel) pipe threads are the same as in the face of the straight thread male end seals against the flat face
BSPP. female seat and is mechanically held in place by a swivel female nut.
Dash Inch Thread Male thread Female thread Dash Inch Thread Male thread Female thread
OD OD OD OD
Size Size mm in mm in Size Size mm in mm in
-2 1/8” 28 9.4 .37 8.1 .32 4 1/4” 18 14.2 .56 12.9 .51
-4 1/4” 19 13.7 .53 12.4 .49 6 3/8” 16 17.3 .68 16.0 .63
-6 3/8” 19 17.2 .68 16.0 .62 8 1/2” 16 20.6 .81 19.0 .75
-8 1/2” 14 21.5 .84 19.8 .77 10 5/8” 14 25.4 1.00 23.6 .93
-10 5/8” 14 23.1 .91 20.6 .81 12 3/4” 12 30.0 1.18 27.8 1.10
-12 3/4” 14 36.9 1.06 25.4 1.00 16 1” 12 36.6 1.44 34.5 1.36
-16 1” 11 34.0 1.34 31.8 1.25 20 1-1/4” 12 42.7 1.68 40.6 1.60
-20 1-1/4” 11 42.6 1.68 40.4 1.59 24 1-1/2” 12 50.8 2.00 48.8 1.92
-24 1-1/2” 11 48.5 1.90 46.2 1.81
-32 2” 11 60.4 2.37 58.2 2.29
Thread Guide
SAE J512, 45° Flare Komatsu 30°
The SAE 45° flare connectors seal in the same manner and are Used extensively on Komatsu equipment, this 30° flare connector has
similar to the 37° connectors except for the flare angle. When the parallel metric threads and is sometimes confused with JIS 30° flare which
straight threads are engaged, the 45° male seat seals on the 45° has parallel standard threads.
female flare seat. 45° connectors are commonly found in automotive
and refrigeration applications, on brass adapters, and are generally
used at lower pressures than 37° JIC connectors. Check the threads
and flares carefully to make positive identification.
Dash Inch Thread Male thread Female thread Dash Metric Thread Male thread Female thread
OD OD OD OD
Size Size mm in mm in Size Size mm in mm in
2 1/8 24 7.9 0.31 6.9 0.27 6 9 M18x1.5 18 .71 16.5 .65
3 3/16 24 9.6 0.38 8.6 0.34 8 12 M22x1.5 22 .87 20.5 .82
4 1/4 20 11.2 0.44 9.9 0.39 10 16 M24x1.5 24 .94 22.5 .88
5 5/16 20 12.7 0.50 11.4 0.45 12 19 M30x1.5 30 1.18 28.5 1.12
6 3/8 18 15.7 0.62 14.2 0.56 16 25 M33x1.5 33 1.30 31.5 1.24
8 1/2 16 19.0 0.75 17.0 0.67 20 32 M36x1.5 36 1.42 34.5 1.36
10 5/8 14 22.3 0.88 20.3 0.80 24 38 M42x1.5 42 1.65 40.5 1.59
12 3/4 12 26.9 1.06 24.9 1.09
14 7/8 12 31.7 1.25 29.5 1.16
16 1 12 35.0 1.38 32.5 1.28
German Metric DIN 2353 Code 61 & Code 62 4 Bolt Flange
This connector system consist of one male and three styles of female, These are two types of SAE split flanges, code 61 and code 62. These flanges
all of which have straight metric threads. Sealing takes place between are non-interchangeable. The code 61 or standard split flange is designed for
the 24° seat in the male end and the respective sealing area in the hydraulic systems, which operate at maximum pressure of 3000 to 5000 PSI,
female ends. DIN 2353 includes both a light and heavy duty series depending on the size. The code 62 operates at 6000 PSI maximums
which can be indentified by measuring the tube OD. regardless of size. The table below specifies the maximum recommended
working pressure of code 61 and code 62 split flanges.
Thread Male Thread Female Thread Tube OD Dash Inch Code 61 Code 62 / Caterpillar
OD ID Light Heavy Size Size Pressure Flange Pressure Flange Thickness
mm in mm in mm mm Rating OD Rating OD 62 CAT
M12x1.5 12 .47 10.5 .41 6 - 8 1/2” 5000 1-3/16” 6000 1-1/4” .305 NA
M14x1.5 14 .55 21.5 .49 8 6 12 3/4” 5000 1-1/2” 6000 1-5/8” .345 .560
M16x1.5 16 .63 14.5 .57 10 8 16 1” 5000 1-3/4” 6000 1-7/8” .375 .560
M18x1.5 18 .71 16.5 .65 12 10 20 1-1/4” 4000 2” 6000 2-1/8” .405 .560
M20x1.5 20 .78 18.5 .73 - 12 24 1-1/2” 3000 2-3/8” 6000 2-1/2” .294 .560
M22x1.5 22 .87 20.5 .81 15 14 32 2” 3000 2-13/16” 6000 3-1/8” .495 .560
M24x1.5 24 .94 22.5 .89 - 16
M26x1.5 26 1.02 24.5 .96 18 -
M30x2 30 1.18 28 1.11 22 20
M36x2 36 1.41 34 1.34 28 25
M42x2 42 1.65 40 1.57 - 30
M45x2 45 1.77 43 1.70 35 -
M52x2 52 2.04 50 1.97 42 38
Flareless Tube
The imperial size flareless fitting utilizes a metal to metal seal between the
24° seat on the male threaded fitting and either a compression sleeve on
a piece of tube, stand-pipe or 24° ball nose machined fitting. To achive a
leak free connection all sealing surfaces must be smooth and free of any
damage or contamination.
Dash Inch Thread Male thread Female thread
OD OD
Size Size mm in mm in
2 1/8 24 7.9 0.31 6.9 0.27
3 3/16 24 9.6 0.38 8.4 0.33
4 1/4 20 11.2 0.44 9.9 0.39
5 5/16 20 12.7 0.50 11.4 0.45
6 3/8 18 14.2 0.56 12.7 0.50
8 1/2 16 19.0 0.75 17.5 0.69
10 5/8 14 22.3 0.88 20.7 0.81
12 3/4 12 26.9 1.06 24.6 0.97
14 7/8 12 30.2 1.19 28.2 1.11
16 1 12 33.3 1.31 31.2 1.23
20 1-1/4 12 41.3 1.63 39.3 1.55
24 1-1/2 12 47.6 1.88 45.6 1.80
Hydraulic Hose
MX (100R1AT) 1 Wire Temperature Range: -40° to 93°C (-40° to 200°F)
Tube: Oil resistant nitrile rubber
Reinforcement: One high tensile steel wire braid
Cover: Abrasion and weather resistant synthetic rubber MSHA
Hose Coupling W. Pressure B. Pressure ID OD Min Bend Weight Reels +/- Retail
MX04 K-HY 2750 PSI 11,000 PSI 0.250 0.530 4” 0.134lb/ft 800ft $3.96
MX06 K-HY,BW 2250 PSI 9000 PSI 0.375 0.690 5” 0.208lb/ft 500ft $4.34
MX08 K-HY,BW 2000 PSI 8000 PSI 0.500 0.875 7” 0.255lb/ft 350ft $5.05
MX10 K-HY,BW 1500 PSI 6000 PSI 0.625 0.940 8” 0.282lb/ft 650ft $5.77
MX12 K-HY,BW 1250 PSI 5000 PSI 0.750 1.100 9.5” 0.382lb/ft 400ft $6.70
MX16 K-HY,BW 1000 PSI 4000 PSI 1.000 1.410 12” 0.543lb/ft 250ft $9.47
BXX (100R2AT) 2 Wire Temperature Range: -40° to 93°C (-40° to 200°F)
Tube: Oil resistant nitrile rubber
Reinforcement: Two high tensile steel wire braid
Cover: Abrasion and weather resistant synthetic rubber MSHA
Hose Coupling W. Pressure B. Pressure ID OD Min Bend Weight Reels +/- Retail
BXX04 K-HY 5000 PSI 20,000 PSI 0.250 0.590 4” 0.200lb/ft 700ft $4.60
BXX06 K-HY,BW 4000 PSI 16,000 PSI 0.375 0.750 5” 0.329lb/ft 450ft $5.22
BXX08 K-HY,BW 3500 PSI 14,000 PSI 0.500 0.880 7” 0.376lb/ft 320ft $5.77
BXX10 K-HY,BW 2750 PSI 11000 PSI 0.625 0.980 8” 0.402lb/ft 520ft $8.92
BXX12 K-HY,BW 2250 PSI 9000 PSI 0.750 1.160 9.5” 0.557lb/ft 400ft $12.13
BXX16 K-HY,BW 2000 PSI 8000 PSI 1.000 1.500 12” 0.818lb/ft 200ft $17.82
BXX20 K-HY,BW 1625 PSI 6500 PSI 1.250 1.870 16.5 1.281lb/ft NA $21.50
BXX24 BW 1250 PSI 5000 PSI 1.500 2.150 20” 1.455lb/ft NA $34.98
BXX32 BW 1125 PSI 4500 PSI 2.000 2.650 25” 1.838lb/ft NA $43.27
2SNK (DIN EN 853) 2 Wire Temperature Range: -40° to 93°C (-40° to 200°F)
Tube: Oil resistant nitrile rubber
Reinforcement: Two high tensile steel wire braid
Cover: Abrasion and weather resistant synthetic rubber
1Million impulse, small bend radius, Longlife
Hose Coupling W. Pressure B. Pressure ID OD Min Bend Weight Reels +/- Retail
2SNK04 K-HY 6530 PSI 26,120 PSI 0.250 0.528 2” 0.195lb/ft 700ft $5.06
2SNK06 K-HY,BW 5515 PSI 22,060 PSI 0.375 0.685 3” 0.295lb/ft 450ft $5.74
2SNK08 K-HY,BW 4715 PSI 18,860 PSI 0.500 0.811 4” 0.362lb/ft 320ft $6.35
2SNK12 K-HY,BW 3625 PSI 14,500 PSI 0.750 1.090 7” 0.563lb/ft 400ft $13.34
2SNK16 K-HY,BW 2755 PSI 11,020 PSI 1.000 1.402 9” 0.765lb/ft 200ft $19.60
Hydraulic Hose
Hydraulic Hose
CE (100R12) 4 Wire Temperature Range: -40° to 121°C ( -40° to 250°F)
Tube: Oil resistant synthetic rubber
Reinforcement: Four high tensile steel wire spiral layers
Cover: Grey abrasion and weather resistant synthetic rubber MSHA
Length vary from 35ft to 250ft
Hose Coupling W. Pressure B. Pressure ID OD Min Bend Weight Retail
CET06 BW 4000 PSI 16,000 PSI 0.375 0.780 5” 0.47lb/ft $15.16
CET08 BW 4000 PSI 16,000 PSI 0.500 0.940 7” 0.56lb/ft $15.51
CE10 BW 4000 PSI 16,000 PSI 0.625 1.080 8” 0.65lb/ft $17.25
CE12 BW 4000 PSI 16,000 PSI 0.750 1.210 9.5” 0.89lb/ft $19.79
CE16 BW 4000 PSI 16,000 PSI 1.000 1.500 12” 1.24lb/ft $25.30
CE20 BW,JJ 3000 PSI 12,000 PSI 1.250 1.850 16.5” 1.77lb/ft $36.11
CE24 BW,JJ 2500 PSI 10,000 PSI 1.500 2.110 20” 2.15lb/ft $43.44
CE32 BW,JJ 2500 PSI 10,000 PSI 2.000 2.630 25” 3.02lb/ft $58.79
4SH (DIN EN 856) 4 Wire Temperature Range: -40° to 100°C ( -40° to 212°F)
(DIN 20023) Tube: Oil resistant synthetic rubber
Reinforcement: Four tensile steel wire spiral layers
Cover: Abrasion and weather resistant synthetic rubber
Length vary from 35ft to 250ft
Hose Coupling W. Pressure B. Pressure ID OD Min Bend Weight Retail
4SH12 BW 6095 PSI 24,380 PSI 0.750 1.268 11” 1.03lb/ft $21.77
4SH16 BW 5515 PSI 22,060 PSI 1.000 1.524 13” 1.38lb/ft $27.83
4SH20 BW,JJ 5000 PSI 20,000 PSI 1.250 1.791 18” 1.65lb/ft $39.72
4SH24 BW,JJ 4200 PSI 16,800 PSI 1.500 2.106 22” 2.45lb/ft $47.78
4SH32 JJ 3625 PSI 14,500 PSI 2.000 2.681 27.5” 3.05lb/ft $64.67
HT6 (100R15) 4 & 6 Wire Temperature Range: -40° to 121°C ( -40° to 250°F)
Tube: Oil resistant synthetic rubber
Reinforcement: Four & six tensile steel wire spiral layers
Cover: Abrasion and weather resistant synthetic rubber
Length vary from 35ft to 250ft
Hose Coupling W. Pressure B. Pressure ID OD Min Bend Weight Retail
HT612* BW 6000 PSI 24,000 PSI 0.750 1.421 11” 1.01lb/ft $30.27
HT616 6000 PSI 24,000 PSI 1.000 1.689 13” 1.41lb/ft $36.46
HT620* JJ 6000 PSI 24,000 PSI 1.250 2.028 18” 2.42lb/ft $106.43
HT624* JJ 6000 PSI 24,000 PSI 1.500 2.346 21” 3.42lb/ft $118.81
Hydraulic Hose
Hydraulic Hose
822 (100R7) Non Conductive Temperature Range: -40° to 100°C ( -40° to 212°F)
Tube: Unplasticised polyester elastomer
Reinforcement: Single braid of polyester fiber
Cover: Non pin pricked orange polyurethane
726 (100R7) Twin Line Temperature Range: -40° to 100°C ( -40° to 212°F)
Tube: Unplasticised polyester elastomer
Reinforcement: Single braid of polyester fiber
Cover: Black polyurethane
Misc Hose
Hydraulic Hose
T1 Teflon Temperature Range: -60° to 260°C (-76° to 500°F)
Tube: White Teflon®
Reinforcement: Single 304 stainless steel braid
Full bore
Hose Coupling W. Pressure B. Pressure ID OD Min Bend Weight Retail
T104-FB GS 2750 PSI 11,000 PSI 0.250 0.380 3.0” 0.07lb.ft $8.69
T105-FB GS 2250 PSI 9000 PSI 0.313 0.430 4.0” 0.07lb/ft $11.17
T106-FB GS 2000 PSI 8000 PSI 0.375 0.490 4.5” 0.09lb/ft $12.29
T108-FB GS 1500 PSI 6000 PSI 0.500 0.630 5.0” 0.15lb/ft $15.20
T110-FB GS 1375 PSI 5500 PSI 0.625 0.750 6.0” 0.18lb/ft $18.61
T112-FB GS 1125 PSI 4500 PSI 0.750 0.880 8.0” 0.22lb/ft $25.61
T116-FB GS 875 PSI 3500 PSI 1.000 1.130 12” 0.30lb/ft $36.27
Misc Hose
Misc Hose
HJK - High Jack Hose Temperature Range: -40° to 100°C (-40° to 212°F)
Tube: Oil resistant nitrile rubber
Reinforcement: Two high tensile steel wire braid
Cover: Abrasion and weather resistant neoprene
1Million impulse, small bend radius, Longlife
Hose Coupling W. Pressure B. Pressure ID OD Min Bend Weight Retail
HJK04 K-HY 10,000 PSI 20,000 PSI 0.250 0.55 2” NA POR
JL06 K-HY 10,000 PSI 20,000 PSI 0.375 0.67 2.5” NA POR
Hose Accessories
Hose Accessories
Plastic Sprial Wrap Double bevelled edges to help prevent hose chafing.
Up to 3” is fire retardant.
Use for wrapping multiple hoses or as a chafe guard.
Avertissement
BP Male BSPP
BPF Female BSPP
Le choix, l’installation ou l’entretien
BPF45T Female BSPP 45° Tube inexact peut entraîner une défaillance
BPF90T Female BSPP 90° Tube prématurée, une blessure corporelle ou bien
BPHB BSPP Female Flat Face (Hiab)
BT Male BSPT des dommages matériels.
DX Metric Male 60° DIN2999 Tous les boyaux ont une durée limite qui
FA Female 45°seat SAE
FF Female NPTF
dépend des conditions d’usages auxquels ils
FJ Female JIC 37° seat sont exposés. Si on soumet un tuyau à des
FJ45T Female JIC 45° Tube conditions qui sont plus rigoureuses que les
FJ90T Female JIC 90° Tube
FN Female NPSM Swivel tolérances recommandées par le fabriquant,
JPF JIS Swivel 30° seat BSPP thread alors sa durée sera réduite d’une manière
KMF Kamatsu 30° seat Metric thread
MA Male 45° seat SAE
significative.
MF Male Invert Flare Les facteurs variables qui peuvent altérer
MH Male Hi-Seal la durée d’usage pourraient être: la pression de
MP Male NPTF
MV SAE Male Flareless mécanisme nominale, les irrégularités de
MZ Male Metric 24° Seat DIN 2352 pression, la pression minimale d’éclatement,
NL Swivel Female Dual seat 37°/45°
NV Grease hose thread
les variations de températures, de
OFT Female O-Ring Face Seal l’environnement, et de la compatibilité
OF45T Female O-Ring Face Seal 45° tube hydraulique.
OF90T Female O-Ring Face Seal 90° tube
OM Male O-Ring Face Seal
PA Code 61 Flange
PA22-90 Code 61 Flance 22-90° Tube
PAK Komatsu Flange
Warning
PH Code 62 Flange
PH22-90 Code 62 Flance 22-90° Tube
Improper selection, installation or
PHC Cat Flange maintenance of hose may result in premature
RA Male O-Ring Boss failure, bodily injury or property damage.
RL Inch Standpipe
RM Hose Mender All hose has a finite life dependent on
RO Female Metric 24° Cone the service conditions to which it is exposed.
RU Female Metric 24/60° Cone
RZ Metric Standpipe
If a hose is subjected to conditions more
SP Male Swivel NPTF severe than recommended limits then its life
TFS Female O-Ring Refrigerant will be significantly reduced.
TF45T Female O-Ring Refrigerant 45° tube
TF90T Female O-Ring Refrigerant 90° tube Variable factors which can affect service
TMS Male O-Ring Refrigerant life include: Rated Working Pressure, Pressure
TM45T Male O-Ring Refrigerant 45° tube
TM45T Male O-Ring Refrigerant 90° tube
Surges, Minimum Burst Pressure,
TMI Male Insert Refrigarent Temperature Range, Enviroment and Fluid
Compatibility.
BPF - Female BSPP BPHB - BSP F. Flat Face FA45T - Female 45°SAE 45°
BPF45T - Female BSPP 45° BT - Male BSPT FA90T - Female 45°SAE 90°
MZ - Male Metric 24° OFT - Female O-Ring Face OF90T - Female ORF 90°
4 Wire Crimp
BPF - Female BSP FJ - Female JIC FJ90T - Female JIC 90°
BPF90T - Female BSP 90° FJ45T - Female JIC 45° MJ - Male JIC
MP - Male NPTF OF45T - Female ORing Face 45° PA22 - Code 61 Flange 22°
BW06-06OF45T $23.91
BW06-06MP $7.94 BW08-08OF45T $25.79
BW06-08MP $12.45 BW08-10OF45T $27.76
BW12-12OF45T $64.83 BW12-12PA22* $63.15
BW08-08MP $9.54
BW12-16OF45T $59.32 BW12-16PA22 $68.48
BW08-12MP $12.51
BW16-16OF45T $80.28 BW16-16PA22 $78.85
BW12-12MP $17.85
BW16-20OF45T $74.30 BW20-20PA22* $119.23
BW12-16MP $28.89
BW20-20OF45T $118.40 BW20-24PA22* $132.26
BW16-16MP $27.76
BW24-24OF45T $184.10 BW24-24PA22* $173.38
BW16-20MP $41.50
BW32-32PA22 $276.40
BW20-20MP $47.21
BW20-24MP $84.83 OF90T - Female ORing Face 90° PA30 - Code 61 Flange 30°
BW24-24MP $74.90
BW32-32MP $134.49
BW32-32AMP $233.68
4 Wire Crimp
PA60 - Code 61 60° PH22 - Code 62 22° PH90 - Code 62 90°
FJ45T - Female JIC 45° OFT - Female O-Ring Face PA22 - Code 61 22°
FJ90T - Female JIC 90° OF45T - Female ORF 45° PA30 - Code 61 30°
JJ20-20PA45 $113.01
JJ20-20MJ $87.19 JJ20-20OF90T $134.68 JJ24-24PA45 $145.43
JJ24-24MJ $128.52 JJ24-24OF90T $186.42 JJ24-32PA45 $186.35
JJ32-32MJ* $221.16 JJ32-32PA45* $370.16
CY Crimp
MP - Male NPTF SP - Male NPTF Swivel
Misc Crimp
Re-usables 100R2AT
BPF - Female BSPP FJ - Female JIC
Female JIC
BM06-06BPF $37.09 BM04-04FJ $21.53 BA04-04FJ $18.45
BM08-08BPF $50.80 BM04-05FJ $29.21 BA06-06FJ $19.43
BM06-06FJ $17.54 BA06-08FJ $27.65
BM06-08FJ $26.47 BA08-08FJ $21.40
BM08-08FJ $23.74 BA08-10FJ $27.41
BM08-10FJ $24.78
BM12-12FJ $38.19 Male JIC
BM16-16FJ $92.60 BA06-06MJ $30.84
BA08-08MJ $34.10
BA08-10MJ $33.91
MJ - Male JIC
BPF45T - Female BSPP 45° Male Pipe
BA04-04MP $17.86
BA06-06MP $18.32
BA08-08MP $21.32
BM06-06MJ $29.34
BM08-08MJ $30.97
BM04-04BPF45T $38.22 BM08-10MJ $40.18
BM06-06BPF45T $44.40 BM12-12MJ $63.58
BM08-08BPF45T $54.85
BM04-04MP $18.90
BM06-06BPF90T $59.46 BM06-04MP* $27.65
BM08-08BPF90T $86.18 BM06-06MP $19.36
BM08-08MP $20.34
BM12-12MP $31.75
BM16-16MP $75.44
100R5 Re-usables
Re-usables 100R5
FA - Female 45° (SAE) FJ90T - Female JIC 90° MF - Male Invert Flare
BN04-02MP $7.45
BN04-04MP $9.98
BN06-04MP $9.02
BN06-06MP $13.44
BN04-04FJ45T $32.49 BN06-06MA $25.12 BN08-08MP $14.79
BN05-05FJ45T $31.91 BN12-12MA $37.91 BN10-08MP $19.51
BN06-06FJ45T $31.43 BN10-12MP* $32.14
BN08-08FJ45T* $35.47 BN12-12MP $30.44
BN10-10FJ45T $55.68 BN16-12MP* $32.76
BN12-12FJ45T $57.05 BN16-16MP $36.96
BN16-16FJ45T $81.86 BN20-20MP $56.38
BN24-24MP $91.86
BN32-32MP $173.73
KA Brass Push-on
Brass Push - On
FA - Female SAE MF - Male Invert Flare MP90 - Male NPTF 90
BL Refrigerant Fittings
Refrigerant Fittings
TFS - Female O-Ring TM45T - Male O-Ring 45° FA - Female 45° SAE
BL06-06FAT* $7.60
BL06-06TFS $8.03 BL06-06TM45T $9.03 BL06-08-FAT* $11.21
BL08-08TFS $8.89 BL08-08TM45T $9.98 BL08-08FAT $8.27
BL10-10TFS $10.07 BL10-10TM45T $11.64 BL10-08FAT* $13.02
BL12-12TFS $14.35 BL12-12TM45T $15.82 BL10-10FAT $9.50
BL12-12FAT $13.45
TF45T - Female O-Ring 45° TM90T - Male O-Ring 90° FA45T - Female 45° SAE 45°
TF90T - Female O-Ring 90° TMI - Male Insert FA90T - Female 45° SAE 90°
BL06-06MV* $21.29
BL06-08MV* $20.81
BL06-06TMS $7.89 BL06-06TMI90 $12.55 BL08-08MV $23.81
BL08-08TMS $8.74 BL08-08TMI90 $14.40 BL10-08MV* $25.90
BL10-10TMS $9.74 BL10-10TMI90 $16.77 BL10-10MV $30.47
BL12-12TMS $14.54 BL12-10MV* $27.32
BL12-12MV* $30.51
BL Refrigerant Fittings
Refrigerant Fittings
MZ - Compression Metric TFS-R134 - Female O-Ring RM-R134 - Mender
W/R134A W/R134A
Pipe Adapters
Pipe Adapters
24SA - MNPTF X MNPTF 24SG - FNPTF X MNPTF 24ST - MNPTF Hex Head
Pipe Adapters
Pipe Adapters
25UA - MNPTF X MNPTF 90° 25UJ - FNPTF X FNPTF 90° 25VK - MNPTF X FNPTF RUN
25UG - MNPTF X FNPTF 90° 25VC - MNPTF X FNPTF TEE 25WJ - FNPTF CROSS
25VJ-2-2 $7.82
25VJ-4-4 $7.94
Other sizes and 25VJ-6-6 $10.10
configurations are 25VJ-8-8 $17.09
available please call 25VJ-12-12 $23.91
for pricing and 25VJ-16-16 $46.37
25VJ-20-20 $85.55
availability. 25VJ-24-24 $179.11
Pipe Adapters
60UA - MNPTF X FNPSM 90 60UC - MNPTF X FNPSM 90L 60VC - FNPTF X MNPTF
1- Male JIC 1- Male JIC 1- Male JIC 1- Male JIC 1- Male JIC
2- Female JIC 2-Female JIC 2- Female JIC 2- Code 61 2- Code 61
pg 36 pg 36 pg 36 pg 37 pg 37
1- Male JIC 1- Male JIC 1- Male JIC 1- Male JIC Code 61 Flange Kit
2- Code 61 2- Code 62 2- Code 62 2- Code 62 Code 62 Flange Kit
pg 37 pg 37 pg 37 pg 37 pg 37
Flange Adapters
Flange Adapters
63SE - MJIC X CODE 61 (HP) 63SF - MJIC X CODE 62
JIC Adapters
830-FS - JIC CAP 839-FS-10 $3.69 842H-FS - MJIC X MJIC
JIC Adapters
JIC Adapters
JIC Adapters
844-FS - MJIC X MJIC 845-FSO - MJIC X MORB TEE 848-FS - MJIC X MNPTF
844-FS-3* $18.59
848-FS-2-2 $7.11
844-FS-4 $8.32 845-FSO-4-4 $11.43 848-FS-3-2* $2.62
844-FS-5* $10.48 845-FSO-5-5* $14.03 848-FS-4-2 $1.23
844-FS-6 $8.54 845-FSO-6-6 $11.91 848-FS-4-4 $1.71
844-FS-8 $11.08 845-FSO-8-8 $16.48 848-FS-4-6 $3.42
844-FS-10 $15.82 845-FSO-10-8* $26.20 848-FS-4-8 $9.60
844-FS-12 $19.97 845-FSO-10-10 $25.35 848-FS-5-2 $1.97
844-FS-16 $41.48 845-FSO-12-12 $31.64 848-FS-5-4 $2.10
844-FS-20 $70.35 845-FSO-16-16 $58.41 848-FS-5-6 $3.88
844-FS-24* $79.47 845-FSO-20-20* $104.13 848-FS-6-2 $2.48
848-FS-6-4 $1.45
848-FS-6-6 $2.06
848-FS-6-8 $3.35
848-FS-6-12* $15.87
848-FS-8-4 $3.28
845-FS - MJIC X MNPTF 846-FS - MJIC X FNPTF 848-FS-8-6 $2.29
TEE 848-FS-8-8 $2.77
848-FS-8-12 $5.61
848-FS-10-6 $4.13
848-FS-10-8 $3.35
848-FS-10-12 $5.87
848-FS-12-6* $13.83
848-FS-12-8 $5.09
848-FS-12-12 $4.83
845-FS-3-2* $9.28 845-FS-2-2* $19.33
848-FS-12-16 $7.97
845-FS-4-2 $7.61 846-FS-3-2* $17.70
848-FS-14-12 $9.82
845-FS-4-4 $8.07 846-FS-4-2 $2.63
848-FS-16-12 $9.28
845-FS-5-2 $8.88 846-FS-4-4 $4.53
848-FS-16-16 $8.16
845-FS-6-4 $7.83 846-FS-5-4 $4.41
848-FS-16-20 $16.39
845-FS-6-6 $10.31 846-FS-6-4 $3.34
848-FS-20-16 $16.83
845-FS-8-6 $9.93 846-FS-6-6 $4.16
848-FS-20-20 $13.84
845-FS-8-8 $18.45 846-FS-8-6 $4.51
848-FS-20-24 $57.29
845-FS-10-8 $13.90 846-FS-8-8 $6.87
848-FS24-20 $48.40
845-FS-12-8 $52.59 846-FS-10-6* $8.11
848-FS-24-24 $22.92
845-FS-12-12 $19.24 846-FS-10-8 $6.72
848-FS-32-24 $92.69
845-FS-16-16 $31.06 846-FS-10-12* $17.66
848-FS-32-32 $79.79
845-FS-20-20 $92.73 846-FS-12-8 $12.76
845-FS-32-32* $487.49 846-FS-12-12 $9.50
846-FS-14-12 $11.36
846-FS-16-12 $18.53
846-FS-16-16 $14.39
846-FS-20-20 $28.66
846-FS-24-24 $69.34
846-FS-32-32 $106.29
JIC Adapters
848-FSO - MJIC X MORB 849-FS - MJIC X MNPTF 90 849-FSO - MJIC X MORB 90
JIC Adapters
JIC Adapters
JIC Adapters
851-FS - MJIC X MNPTF 854-FS - MJIC X MNPTF
849L-FS-6-6* $15.96
849L-FS-8-6* $14.22
849L-FS-8-8 $15.13
849L-FS-10-8* $17.73
849L-FS-12-12 $23.91
849L-FS-16-16* $46.52
849L-FS-20-20 $78.57
851-FS-4-2 $8.59 854-FS-2-2* $15.26
849LL-FS - MJIC X MNPTF 851-FS-4-4 $9.86 854-FS-4-2 $5.85
90 XTRA LONG 851-FS-6-4 $8.01 854-FS-4-4 $6.82
851-FS-6-6 $13.32 854-FS-4-6 $31.34
851-FS-8-6 $12.25 854-FS-5-2* $7.41
851-FS-8-8 $19.77 854-FS-5-4* $7.83
851-FS-10-8* $14.52 854-FS-6-4 $6.28
851-FS-12-12 $20.75 854-FS-6-6 $8.50
851-FS-16-16 $33.77 854-FS-6-8 $10.01
851-FS-20-20 $74.20 854-FS-8-4* $12.49
849LL-FS-2-2* $27.66 854-FS-8-6 $8.68
849LL-FS-4-2 $11.34 851-FSO - MJIC X MORB 854-FS-8-8 $9.47
849LL-FS-4-4* $15.20 854-FS-8-12 $16.07
849LL-FS-6-4* $12.32 854-FS-10-8 $10.21
849LL-FS-6-6 $12.69 854-FS-10-12 $14.45
849LL-FS-8-6* $17.17 854-FS-12-8 $15.65
849LL-FS-8-8* $18.74 854-FS-12-12 $14.48
849LL-FS-10-8* $23.40 854-FS12-16 $32.23
849LL-FS-12-12* $28.30 854-FS-16-12 $25.94
851-FSO-4-4 $12.91
849LL-FS-16-16* $46.86 854-FS-16-16 $22.25
851-FSO-5-5* $13.41
849LL-FS-20-20 $101.52 854-FS-16-20* $53.68
851-FSO-6-6 $11.57
851-FSO-8-8 $16.06 854-FS-20-20 $37.92
850-FS - MJIC X FNPTF 90 851-FSO-10-10 $25.62 854-FS-24-24 $70.99
851-FSO-12-12 $33.65 854-FS-32-32* $243.54
851-FSO-16-16 $57.09
851-FSO-20-20* $70.28
851-FSO-24-24* $108.08
JIC Adapters
854-FSO - MJIC X MORB 871-FS - MJIC X FJIC Tee
JIC Adapters
855-FS-3* $30.00
855-FS-4 $5.33
854-FSO-4-4 $9.22 855-FS-5* $6.98 871-FS-4 $9.22
854-FSO-5-5 $9.90 855-FS-6 $7.08 871-FS-5* $13.19
854-FSO-6-6 $11.17 855-FS-8 $8.01 871-FS-6 $10.92
854-FSO-6-8 $21.10 855-FS-10 $9.81 871-FS-8 $14.01
854-FSO-8-6 $19.10 855-FS-12 $14.60 871-FS-10 $18.04
854-FSO-8-8 $11.37 855-FS-16 $24.15 871-FS-12 $27.67
854-FSO-8-10 $19.29 855-FS-20 $51.89 871-FS-14* $57.50
854-FSO-10-8* $19.32 855-FS-24 $77.60 871-FS-16 $43.67
854-FSO-10-10 $17.24 871-FS-20 $73.17
854-FSO-10-12 $23.22 871-FS-24* $121.12
854-FSO-12-10* $25.58
854-FSO-12-12 $19.47 857-FS - MJIC X FNPTF Tee 872-FS - MJIC X FJIC Tee
854-FSO-12-16 $40.45
854-FSO-16-12 $45.42
854-FSO-16-16 $31.72
854-FSO-20-20* $61.60
854-FSO-24-24 $104.93
855BH-FS - MJIC Bulkhead 90
857-FS-4-2* $14.06 872-FS-4 $10.15
857-FS-6-4* $14.07 872-FS-5 $14.35
857-FS-8-6* $14.22 872-FS-6 $10.04
857-FS-10-8* $20.98 872-FS-8 $13.91
857-FS-12-12* $45.68 872-FS-10 $18.52
855BH-FS-4 $7.28 857-FS-16-16* $53.25 872-FS-12 $26.12
855BH-FS-5* $7.35 872-FS-14* $48.76
855BH-FS-6 $7.50 872-FS-16 $50.93
855BH-FS-8 $10.67 872-FS-20 $90.47
855BH-FS-10 $15.62 858-FS - MJIC X FNPTF 878-FS - FJIC X MNPTF
855BH-FS-12 $22.42
855BH-FS-16 $43.56
855BH-FS-20 $95.61
855BH-FS-24* $140.64
855-FS - MJIC 90
858-FS-2-2* $34.84
858-FS-4-2 $11.16
858-FS-4-4 $14.84 878-FS-4-2* $6.23
858-FS-6-4 $13.15 878-FS-6-4* $9.25
858-FS-6-6 $15.24 878-FS-8-6* $10.16
858-FS-8-6 $13.41 878-FS-10-8 $14.09
858-FS-10-8* $17.83 878-FS-12-12 $23.93
858-FS-12-12 $36.12 878-FS-16-16* $41.38
858-FS-16-16 $50.26 878-FS-20-20* $89.52
858-FS-20-20 $91.90
JIC Adapters
JIC Adapters
879-FS - MJIC X FJIC 882-FS - FJIC X FNPTF 889-FS - MJIC X FJIC 45
721-FSO-4 $2.31
721-FSO-5 $5.53
721-FSO-6 $2.31
721-FSO-8 $3.10 742-FSO-4-4* $10.80
721-FSO-10 $4.14 742-FSO-6-6* $6.84
721-FSO-12 $5.17 742-FSO-8-8* $9.06
721-FSO-14 $9.39 742-FSO-10-10* $20.28
721-FSO-16 $9.22 742-FSO-12-12* $22.14
721-FSO-20 $12.78 742-FSO-16-16* $22.68
721-FSO-24 $27.19 742-FSO-20-20* $30.78
721-FSO-32* $83.79 742-FSO-24-24* $33.20
830-TT - ORFS CAP NUT 840-TT - ORFS Braze Sleeve 844-TT - MORFS X MORFS
Super Swivel
Live Swivel
FNPT X FNPT Live Swivel FJIC X MJIC Live Swivel FNPT X FNPT Live Swivel 90°
MNPT X FNPT Live Swivel MNPT X FNPT Live Swivel 90° MJIC X FNPT Live Swivel 90°
Quick Couplers
Quick Couplers
Series 10 Series 30 Series FF
Ind. Inter. ISO B Safeway S30 Perfecting HT Series
Perfecting H Series Perfecting T Series
Aeroquip FD45
Wika Gauges
Winter Gauges
7505 - Flareless Union 90 7605 - Flareless x MNPTF Tee 7755 - Flareless x MNPTF Tee
TN88 - Metric Flareless Sleave TN94 - M. Flareless X MNPT 90 TN100 - M. Flareless Union Tee
3971 - FNPTF Cross 5177 - JIC Flared Sleave 5267 - FJIC x MNPTF
7267 - Flareless x FNPTF 7417 - Flareless x MNPTF 90 7717 - Flareless Union Tee
All pricing is quoted per foot Tous les prix sont cotés par le pied Note: Due to extreme price
on standard sizes and metric pour des grandeurs standards et fluctuations in steel and
carbon steel. Stainless steel pour l’acier carbonisé métrique. Le stainless steel all tubing is to
metric tubing pricing is priced prix pour la tuyauterie d’acier be priced upon ordering.
in meters. Standard sizes come inoxydable métrique est calculé en
in 20ft lengths and metric sizes mètres. Les grandeurs standards À NOTER: À cause des varia-
come in 6 meter lengths. viennent en longueurs de vingt tions extrêmes dans les prix de
(20) pieds et les métrique viennent l’acier et de l’acier inoxydable, le
en longueurs de six (6) mètres. prix de toute la tuyauterie sera
fixé lorsqu’on placera une
commande.
Crimpers
DE-30S¹ / EC-30S Portable crimper
Crimpers
Die Die Part
Colour Size Number
Orange 0.350 EN82-008-01 Optional Die
Red 0.520 EN82-008-02 Standard Die
Yellow 0.670 EN82-008-03 Standard Die
Blue 0.830 EN82-008-04 Standard Die
Green 1.100 EN82-008-05 Standard Die
Black 1.320 EN82-008-06 Standard Die
Hose Cleaners
Equipment
Pressure Ratings
Pressure Rating for Seamless
Apendix
Hose Size Selection Hydraulic Tubing (PSI)
Flow Rate Pressure Return Suction Tube OD Wall Carbon Stainless
Up to GPM Line Line Line Steel** Steel**
1/4” 0.035 3900 5900
3.00 1/4” 3/8” 5/8” 1/4” 0.490 5700 8600
8.50 3/8” 5/8” 1” 5/16” 0.035 3100 4600
15.00 1/2” 3/4” 1-1/4” 5/16” 0.049 4500 6700
24.00 5/8” 1” 1-1/2” 5/16” 0.065 6100 9250
3/8” 0.035 2500 3800
34.00 3/4” 1-1/4” 2” 3/8” 0.049 3600 5500
60.00 1” 1-1/2” 2-1/2” 3/8” 0.065 5000 7500
95.00 1-1/4” 2” 3” 1/2” 0.035 1800 2800
130.0 1-1/2” 2-1/2” 4” 1/2” 0.049 2700 4000
1/2” 0.065 3600 5500
1/2” 0.083 4800 7200
Adapter Pressure Rating 5/8”
5/8”
0.049
0.065
2100
2800
3200
4300
Thread JIC NPT O-ring O-ring NPSM 5/8” 0.083 3700 5600
5/8” 0.095 4300 6500
NPTF Boss Face Swivel 3/4” 0.049 1700 2600
02 6000 6000 5000 3/4” 0.065 2300 3500
04 5000 6000 5000 9000 5000 3/4” 0.083 3000 4600
06 5000 6000 5000 9000 4000 3/4” 0.095 3500 5300
3/4” 0.120 4600 6900
08 5000 6000 5000 9000 3500 1” 0.049 1300 1900
10 5000 4500 6000 1” 0.065 1700 2600
12 5000 6000 4000 6000 2250 1” 0.083 2200 3400
16 4000 6000 3000 6000 2000 1” 0.095 3000 4500
1” 0.120 3300 5000
20 3000 4000 2500 4000 1625 1-1/4” 0.065 1300 2000
24 2000 3000 2000 4000 1250 1-1/4” 0.083 1700 2600
32 1500 2500 1500 1125 1-1/4” 0.095 2000 3000
1-1/4” 0.120 2600 3900
1-1/2” 0.095 1700 2500
1-1/2” 0.120 2100 3200
Hose Pressure Rating ** Ratings in PSI (4:1 Safety Factor)
Index
855-FS adapter 42 BN 100R5 resuable EC-30 crimper 61
855-TT adapter 49 FA F SAE 26 End Style Designations 12
857-FS adapter 42 FJ F JIC 26 Equipment 61
858-FS adapter 42 FJ45T F JIC 45 26 EZ-204A crimper 61
871-FS adapter 42 FJ90T F JIC 90 26
871-TT adapter 49 FJ90TL F JIC 90 long 26 FF49 coupler 51
872-FS adapter 42 MA M SAE 26 Flareless Adapter 53-55
872-TT adapter 49 MF F Invert 26
878-FS adapter 42 MJ M JIC 26 Gauge, Pressure 52
879-FS adapter 43 MP M NPTF 26 GS crimp 24
879-TT adapter 49 BS10 coupler 51
881-FS adapter 43 BW High Jack Hose 10
881-FSO adapter 43 BPF F BSPP 19 HJK hose 10
882-FS adapter 43 BPF45T F BSPP 45 19 Hose Wrap SEE Spiral Wrap
883-FS adapter 43 BPF90T F BSPP 90 19 Hose Cleaner 62
883-TT adapter 49 FJ F JIC 19 Hose Pressure Ratings 63
889-FS adapter 43 FJ45T F JIC 45 19 Hose Size Selection 63
FJ90T F JIC 90 19 HT6 hose 7
Adapter Pressure Ratings 63 MJ M JIC 19
AG1T hose 10 MP M NPTF 20 Jack Hose 10
Apendix 63 OF45T F ORFS 45 20 JL Hose 10
AX hose 6 OF90T F ORFS 90 20 JJ Crimp
OFT F ORFS 20 FJ F JIC 22
B7 hose 9 OM M ORFS 20 FJ45T F JIC 45 22
Barrier (Refrigerant) Hose 10 PA Code 61 20 FJ90T F JIC 90 22
BL Refrigerant crimp PA22 Code 61 22 20 MJ M JIC 22
TFS F. O-Ring 28 PA30 Code 61 30 20 MP M NPTF 22
TF45T F.O. 45 28 PA45 Code 61 45 21 OFT F ORFS 22
TF90T F.O 90 28 PA60 Code 61 60 21 OF45T F ORFS 45 22
TMS M. O-Ring 28 PA90 Code 61 90 21 OF90T F ORFS 90 22
TM45T M.O. 45 28 PH Code 62 21 PA Code 61 22
TM90T M.O. 90 28 PH22 Code 62 22 21 PA30 Code 61 30 22
TMI M. Insert Or 28 PH30 Code 62 30 21 PA45 Code 61 45 22
TMI90 M.I.O. 90 28 PH45 Code 62 45 21 PA60 Code 61 60 23
FA F. SAE 28 PH90 Code 62 90 21 PA90 Code 61 60 23
FA45T F. SAE 45 28 PHC CAT 21 PH Code 62 23
FA90T F. SAE 90 28 PHC90 CAT 90 21 PH22 Code 62 22 23
MV Compression 28 BXX hose 6 PH30 Code 62 30 23
MZ Metric Comp 29 PH45 Code 62 45 23
RM Mender 29 CE hose 7 PH60 Code 62 60 23
RO F. Metric 29 Cloth Cover hose 9 PH90 Code 62 90 23
RO90T F. Metric 90 29 Combination nipple KC 27
TFSP F.O. w/R134A 29 Coupler (Quick) 51 K-HY crimp
TF45TP F.O. w/R134A 29 Crimp Fitting (see K-HY, BW, CY,JJ,GS) BP MBSPP 13
TF90TP F.O. w/R134A 29 Crimper Equipment 61 BPF FBSPP 13
RMP Mend w/R134 29 CY crimp 24 BPF45T FBSPP 45 13
BM 100R2AT reusable BPF90T FBSPP 90 13
BPF FBSPP 25 DE-30 crimper 61 BPHB HIAB 13
BPF45T FBSPP 45 25 DE-60 crimper 61 BT BSPT 13
BPF90T FBSPP 90 25 DE-100 crimper 61 FA F SAE 13
FJ FJIC 25 DIN EN853 hose 6 FA45T F SAE 45 13
MJ M JIC 25 DIN EN 856 4SH hose 7 FA90T F SAE 90 13
MP M NPTF 25
Contact Information
Head office
President Chris Giannou
General Manager Angus MacDonald amacdonald@stellarindustrial.ca
Controller Jennifer Munroe jmunroe@stellarindustrial.ca
Purchasing Susan Turner sturner@stellarindustrial.ca
Sales Representatives James Derrick jderrick@stellarindustrial.ca
Paul Mombourquette pmombourquette@stellarindustrial.ca
Brent Bezanson bbezanson@stellarindustrial.ca
Order desk Jeff Pyke jpyke@stellarindustrial.ca
Dwight Martin dmartin@stellarindustrial.ca
Mike Duffy mduffy@stellarindustrial.ca
Dave Majcan dmajcan@stellarindustrial.ca
Warehouse manager Wayne Barnaby wbarnaby@stellarindustrial.ca
Moncton Branch
Branch Manager John Frenette jfrenette@stellarindustrial.ca
Order desk Shawn Renton srenton@stellarindustrial.ca
Montreal Branch
Branch Manager Paul Mombourquette pmombourquette@stellarindustrial.ca
Sales Representatives Clark Madgett
Luc Bernard lbernard@stellarindustrial.ca
Order desk Shirley Madgett smadgett@stellarindustrial.ca
Richard Brault rbrault@stellarindustrial.ca
Norman Heeg nheeg@stellarindustrial.ca
Warehouse manager Jim Quesnel jquesnel@stellarindustrial.ca
Montreal Branch
2825 Bothham
Villes St. Laurent, PQ
H4S 1H8
Ph:514-745-6662
Ph:800-387-9973
Distributed by: Fx:514-745-4809