Академический Документы
Профессиональный Документы
Культура Документы
a) Current
b) Voltage
c) Power
d) Power level
Ans : (d)
c) Never
Ans : (a)
a) Noise figure of 0 db
Ans : (c)
4. Fidelity represents
Ans : (d)
5. If the current gain of the amplifier is X, its voltage gain is Y, then its power gain will be
a) X/Y
b) X*Y
c) X+Y
d) X-Y
Ans : (b)
Ans : (c)
a) Differential amplifier
b) DC amplifier
d) Chopper amplifier
Ans : (d)
8. The amplifier gain varies with frequency. This happens mainly due to
a) Miller effect
b) Temperature stability
c) Utmost economy
Ans : (a)
a) Filtering
b) Attenuation
c) Clipping
d) Amplification
Ans : (b)
a) DC amplifier
b) Output amplifier
c) Inverting amplifier
d) Iso-amps
Ans : (d)
12. The improper response time of the amplifier in the biomedical recorders
Ans : (c)
13. To reduce common mode interference during recording of bio signals one can use__________
a) Buffer amplifier
b) Differential amplifier
d) Chopper amplifier
Ans : (b)
a) Grounding
c) Supply voltage
d) Input impedance
Ans : (a)
b) Differential amplifier
d) Chopper amplifier
Ans : (b)
b) Differential amplifier
d) Chopper amplifier
Ans : (b)
b) Pre amplifier
c) Operational amplifier
d) Differential amplifier
Ans : (a)
18. When a number of components are fabricated on same IC chip it is necessary to provide isolation
between two different components for input interconnection is called __________
a) Input amplification
b) Input differentiation
d) Input isolation
Ans : (d)
Ans : (b)
Ans : (c)
21. Pre amplifier isolation in ECG circuit is to
Ans : (a)
a) Input current
b) Output current
c) Stray current
d) Grid current
Ans : (c)
Ans : (b)
a) 1010?
b) 105?
c) 1020?
d) 1015?
Ans : (d)
25. When the input of differential amplifier V1 = 0, then the differential amplifier is said to be operated
in
a) Common mode
b) Differential mode
d) Inverting mode
Ans : (c)
26. When either one of the inputs to the differential amplifier is equal to zero then it is said to be
operated in
b) Differential mode
d) Inverting mode
Ans : (a)
Ans : (a)
Ans : (c)
29. Using mechanical chopper we cannot achieve high chopping rates due to their
a) Input impedance
b) Output impedance
c) Response time
d) Inertia
Ans : (d)
a) 70 dB
b) 80 dB
c) 85 dB
d) 75 dB
Ans : (b)
31. A ————– is usually a display device used to produce a paper record of analog wave form.
b) Electron microscope
c) X-Y recorder
d) Oscilloscope
Ans : (a)
32. The _________ of a recording system is the magnitude of input voltage required to produce a
standard deflection in a recorded trace.
a) Accuracy
b) Linearity
c) Sensitivity
d) Resolution
Ans : (c)
33. A recorder is said to have good frequency response when the sensitivity of the system is _________
for all frequencies present in the signal.
a) Unity
b) Zero
c) Infinity
d) Constant
Ans : (d)
34. In phase response of a recorder noise level ___________ with the band width of a system
a) Increases
b) Decreases
c) Reaches unity
d) Reaches infinity
Ans : (a)
Ans : (c)
36. In electron microscope the projection of the motion on a plane normal to magnetic
a) mVsin?+eB
b) mVsin?/eB
c) mVsin?-eB
d) mVsin?*eB
Ans : (b)
37. Match the following
Ans : (c)
Ans : (a)
39. Duration of rotation of pen in the PMMC system depends upon ___________
a) Phase angle
b) Frequency
c) Magnitude
d) Direction
Ans : (d)
40. The shorter wave length of the electron permits the detailed examination of tiny objects due to
reduction of ___________ effects
a) Reflection
b) Diffraction
c) Refraction
d) Polarization
Ans : (b)
a) X-Y recorder
b) Oscillographic
c) Galvanometric
d) Magnetic
Ans : (c)
Ans : (b)
43. In X-Y recorders, the self balancing potentiometers plot emf as a function of
a) Another emf
b) Frequency
c) Time
d) Pressure
Ans : (a)
44. In strip chart recorders, the self balancing potentiometers plot emf as a function of
a) Another emf
b) Frequency
c) Time
d) Pressure
Ans : (c)
a) 1.6 m/s
b) 1.3 m/s
c) 1.4 m/s
d) 1.5 m/s
Ans : (d)
a) 2 A.V
b) 1 A.V
c) 1.5 A.V
d) 1.2 A.V
Ans : (b)
b) Bistable storage
c) Flat storage
d) CRT
Ans : (a)
b) Deflection
c) Secondary emission
d) Diffusion
Ans : (c)
a) 2000 cm/?s
b) 1000 cm/?s
c) 1500 cm/?s
d) 2500 cm/?s
Ans : (a)
b) X-Y recording
c) Galvanometric
Ans : (b)