Академический Документы
Профессиональный Документы
Культура Документы
Description: MAESTRO ALKYD PRIMER 12070 is an anti-corrosive primer based on alkyd resin. It provides
protection to steel from corrosion subjected to mild exposures. Its anti-corrosive properties are
provided due to zinc phosphate content according to the colour choosen.
*The theoretical spreading rate has been calculated for the stated volume solids and dry
film thickness.
A practical spreading rate will depend on the actual dry film thickness, the nature of the substrate
and the relevant consumption factor.
The physical constants are subject to normal manufacturing tolerances.
Further reference is made to "Explanatory Notes".
Surface Condition: The surface should be stable, firm, dry and free from dust, sand, loose old paint, dirt, grease and oil.
New Steel, Repair and Maintenance - Clean damaged areas thoroughly by power tool cleaning to
minimum St2 or by abrasive blasting to minimum Sa2 to Sa 21/2.
Application Conditions: Apply only on a dry and clean surface with a temperature above the dew point to avoid
condensation.
Remarks: Use only where application and drying can proceed at temperatures above 10°C, preferably above
15°C and relative humidity is below 70%.
Storage and Handling: Product must be stored as per local regulations, and should be kept in dry and well ventilated
location far from heat and direct sunlight. Cans should be tightly closed after use. Mix well
before use.
Safety: Handle with care. Before and during use, observe all safety labels on packaging and paint
containers, consult HEMPEL Material Safety Data Sheets and follow all local or national safety
regulations. Avoid inhalation, avoid contact with skin and eyes, and do not swallow. Take
precautions against possible risks of fire or explosions as well as protection of the environment.
Apply only in well ventilated areas.