Академический Документы
Профессиональный Документы
Культура Документы
ADEKA CORPORATION
7-2-35, HIGASHI OGU, ARAKAWA-KU TOKYO 116-8554 JAPAN Date revised : August 26, 2014
SALES TEL +81-3-4455-2833 FAX +81-3-3809-8232
R&D TEL +81-50-5518-4336 FAX +81-3-3809-8284
-Hydro gelator -
ADEKA NOL GT-730
ADEKA NOL GT-730 is a water soluble polymer which has urethane bond in the structure.
It associates water molecule and show thickening effect on water by forming water gel. It is
used for cosmetics as gelator.
ADEKA NOL GT-730 is diluted product of GT-700 with butylene glycol and water. Effective
component of both products are same.
Features
✔ High-elastic / Springy water gel ✔ Good spray discharge
✔ Salt tolerance ✔ Good solubility in water
✔ BHT free
Table of ingredients
Compositions
INCI NAME
(wt%)
PEG-240/HDI COPOLYMER
30
BIS-DECYLTETRADECETH-20 ETHER
BUTYLENE GLYCOL 50
WATER 19.94
POTASSIUM LAURATE1) 0.03
TOCOPHEROL2) 0.03
1) Carry-over ingredient, Catalyst for synthesis
2) Carry-over ingredient, Antioxidant
(1/6)
Product Name : ADEKA NOL GT-730
Specification
Viscosity(mPa·s)
2,000-6,000
3.3%aq.
pH
6.0-8.5
3.3%aq.
Cloud Point (℃)
>60.0
3.3% aq.
Ignition Residue(%)*1, 2 <0.2
Arsenic(ppm)*2 <2
Dissolution method
The following conditions are examples to prepare 5%aq of GT-730 in lab-scale.
Homo-
mixer 25 4000 - 6000 20 min
Disper
25 4000 - 6000 20 min
GT-730 can make gel with a paddle mixer, homomixer and disper.
Its gel keeps a viscosity under strong shear. Ex. By a disper for 2 h at 8,000rpm.
(2/6)
Product Name : ADEKA NOL GT-730
Gel properties
(i)Viscosity curve of GT-730 gel
1,000,000 6.7%aq.
(solid conc. 2%)
100,000
5%aq.
Viscosity (mPa・ s)
100
10
1
0.01 0.1 1 10 100 1000 10000
GT-730
5%aq.
1,000,000
100,000
Viscosity (mPa・s)
10,000 GT-700
1,000
GT-730
100
10
1
0 0.5 1 1.5 2
Solid Conc. (% )
Same viscosity is obtained when solid concentration is the same.
(3/6)
Product Name : ADEKA NOL GT-730
GT-730
5%aq.
(iv)Influence of temperature
1,000,000
100,000
3.3%aq.
Viscosity (mPa・s)
1,000 5%aq.
(solid conc. 1.5%)
100
6.7%aq.
(solid conc. 2%)
10
1
15°C 25°C 40°C 50°C
degree Celsius
The irreversible separation is shown over 60ºC due to reach cloud point.
(4/6)
Product Name : ADEKA NOL GT-730
(v)Influence of salts
1,000,000
blank
100,000
Viscosity (mPa・s)
10,000 NaCl 1%
1,000
NaCl 5%
100
Both inorganic and organic salt have no influence on the viscosity of GT-730 gel.
(vi)Influence of solvent
35,000
30,000
25,000 Ethanol
Viscosity (mPa・s)
15,000
Dipropylene Glycol
10,000
Glycerin
5,000
0
0 2.5 5 10 20 30 50
The viscosity of the gel decreases gradually by adding the solvents such as glycols.
(5/6)
Product Name : ADEKA NOL GT-730
(vii)Influence of surfactants
10,000,000
1,000,000
LAURETH-7
100,000
Viscosity (mPa・s)
POLOXAMER 184
10,000
POLYQUATERNIUM-6
1,000
CETRIMONIUM CHLORIDE
100
GLYCERYL STEARATE
(water insoluble surfactant)
10
POTASSIUM LAURATE
1
0.0 0.3 0.5 0.8 1.0 1.3 1.5 2.0 5.0
Surfactant Conc. (%)
Typical surfactants which have strong surface activity like LAURETH-7, CETRIMONIUM
CHLORIDE POTASSIUM LAURATE increase the viscosity of GT-730 gel until certain
concentration. Then they decrease the viscosity.
Water soluble polymer like POLYQUATERNIUM-6 or pluronic type surfactants which have weak
surface activity like POLOXAMER 184 have little effect on the viscosity of GT-730 gel.
Water insoluble surfactants like GLYCERYL STEARATE make O/W emulsion. And they little
effect on the viscosity of GT-730 gel.
N+ Cl-
x+z=26, y=30 n
(6/6)