Вы находитесь на странице: 1из 187

ELECTRICAL

AV
A

B
SECTION
AUDIO, VISUAL, NAVIGATION & TELEPHONE SYS- C

TEM
D

E
CONTENTS
AUDIO WITHOUT NAVIGATION IPod Adapter Harness Connector Terminal Layout F
....52
SERVICE INFORMATION ............................ 4 Terminal and Reference Value for IPod Adapter ....52
Satellite Radio Tuner Harness Connector Termi- G
PRECAUTIONS ................................................... 4 nal Layout ................................................................54
Precaution for Supplemental Restraint System Terminal and Reference Value for Satellite Radio
(SRS) "AIR BAG" and "SEAT BELT PRE-TEN- Tuner .......................................................................55
SIONER" ................................................................... 4 H
Trouble Diagnosis ....................................................55
Precaution Necessary for Steering Wheel Rota- Noise Inspection ......................................................58
tion After Battery Disconnect ..................................... 4 Audio Unit (Base and Mid System) Power and
Ground Supply Circuit Inspection ............................58 I
PREPARATION ................................................... 6
AV Control Unit (Premium System) Power and
Commercial Service Tool .......................................... 6
Ground Supply Circuit Inspection ............................59
AUDIO ................................................................. 7 Audio Amplifier Power and Ground Supply Circuit J
Component Parts Location ........................................ 7 Inspection ................................................................60
System Description ................................................... 8 Satellite Radio Tuner Power and Ground Supply
Schematic ............................................................... 11 Circuit Inspection .....................................................60
AV
Wiring Diagram - AUDIO - ....................................... 14 Satellite Radio Tuner Communication Circuit In-
Audio Unit (Base System) Harness Connector spection (Mid System) .............................................61
Terminal Layout ...................................................... 38 Satellite Radio Tuner Communication Circuit In-
spection (Premium System) ....................................63 L
Terminal and Reference Value for Audio Unit
(Base System) ......................................................... 38 Satellite Radio Tuner Left Channel Audio Signal
Audio Unit (Mid System) Harness Connector Ter- Circuit Inspection (Mid System) ...............................64
minal Layout ............................................................ 39 Satellite Radio Tuner Left Channel Audio Signal M
Terminal and Reference Value for Audio Unit (Mid Circuit Inspection (Premium System) ......................65
System) ................................................................... 39 Satellite Radio Tuner Right Channel Audio Signal
AV Control Unit (Premium System without Rock- Circuit Inspection (Mid System) ...............................66 N
ford Fosgate) Harness Connector Terminal Lay- Satellite Radio Tuner Right Channel Audio Signal
out ........................................................................... 42 Circuit Inspection (Premium System) ......................67
Terminal and Reference Value for AV Control Unit Steering Switch Check (With Bluetooth) ..................67
Steering Switch Check (Without Bluetooth) .............69 O
(Premium System without Rockford Fosgate) ......... 42
AV Control Unit (Premium System with Rockford Sound Is Not Heard from Front Door Speaker or
Fosgate) Harness Connector Terminal Layout ....... 45 Front Tweeter (Base and Mid System) ....................70
Terminal and Reference Value for AV Control Unit Sound Is Not Heard from Front Door Speaker or P
(Premium System with Rockford Fosgate) .............. 46 Front Tweeter (Premium System without Rockford
Audio Amplifier Harness Connector Terminal Lay- Fosgate) ..................................................................71
out ........................................................................... 49 Sound Is Not Heard from Rear Speaker (Base and
Terminal and Reference Value for Audio Amplifier.... 50 Mid System) .............................................................73
Sound Is Not Heard from Rear Speaker (Premium
System without Rockford Fosgate) ..........................74

Revision: January 2010 AV-1 2010 Sentra


Sound Is Not Heard from Front Door Speaker or AUDIO ............................................................... 118
Front Tweeter (Premium System with Rockford Component Parts Location ................................... 118
Fosgate) ................................................................. 75 System Description ............................................... 119
Sound Is Not Heard from Rear Speaker Assembly Schematic ............................................................. 121
(Premium System with Rockford Fosgate) ............. 78 Wiring Diagram - AUDIO - .................................... 123
Removal and Installation ........................................ 81 AV Control Unit (Without Rockford Fosgate) Har-
ness Connector Terminal Layout .......................... 136
USB CONNECTOR AND AUX JACK ............... 86 Terminal and Reference Value for AV Control Unit
Removal and Installation ........................................ 86 (Without Rockford Fosgate) .................................. 136
AUDIO ANTENNA ............................................. 87 AV Control Unit (With Rockford Fosgate) Harness
Location of Antenna ................................................ 87 Connector Terminal Layout ................................... 139
Terminal and Reference Value for AV Control Unit
Removal and Installation of Roof Antenna ............. 87
(With Rockford Fosgate) ....................................... 139
TELEPHONE ..................................................... 89 Audio Amplifier Harness Connector Terminal Lay-
Component Parts and Harness Connector Loca- out (With Rockford Fosgate) ................................. 142
tion .......................................................................... 89 Terminal and Reference Value for Audio Amplifier
System Description ................................................. 89 (With Rockford Fosgate) ....................................... 142
Wiring Diagram - H/PHON - .................................... 93 On-Board Diagnosis .............................................. 144
Bluetooth Control Unit Harness Connector Termi- Symptom Chart ..................................................... 147
nal Layout ............................................................... 97 AV Control Unit Power and Ground Supply Circuit
Terminal and Reference Value for Bluetooth Con- Inspection .............................................................. 149
trol Unit ................................................................... 97 Audio Amplifier Power and Ground Supply Circuit
Bluetooth Control Unit Self-Diagnosis Function ..... 99 Inspection .............................................................. 150
How to Proceed with Trouble Diagnosis ................100 Steering Switch Check .......................................... 150
Malfunction Code/Symptom Chart .........................100 Sound Is Not Heard from Front Door Speaker or
Power Supply and Ground Circuit Inspection for Front Tweeter (Without Rockford Fosgate) ........... 152
Bluetooth Control Unit ...........................................100 Sound Is Not Heard from Rear Speaker (Without
Steering Wheel Audio Control Switch Does Not Rockford Fosgate) ................................................ 153
Operate ..................................................................101 Sound Is Not Heard from Front Door Speaker or
Voice Activated Control Function Does Not Oper- Front Tweeter (With Rockford Fosgate) ................ 154
ate ..........................................................................102 Sound Is Not Heard from Rear Speaker Assembly
Removal and Installation .......................................105 (With Rockford Fosgate) ....................................... 157
Removal and Installation ....................................... 159
REAR VIEW CAMERA .................................... 108
Component Parts and Harness Connector Loca- NAVIGATION SYSTEM .................................... 163
tion .........................................................................108 How to Proceed with Trouble Diagnosis ............... 163
System Description ................................................109
Wiring Diagram - R/VIEW - ....................................110
TELEPHONE .................................................... 164
Component Parts and Harness Connector Loca-
Rear View Camera Power Supply and Ground Cir-
tion ........................................................................ 164
cuit Inspection ........................................................110
System Description ............................................... 164
Removal and Installation .......................................112
Wiring Diagram - H/PHON - .................................. 167
iPod® CONNECTOR ....................................... 113 Bluetooth Control Unit Harness Connector Termi-
Removal and Installation .......................................113 nal Layout ............................................................. 169
Terminal and Reference Value for Bluetooth Con-
iPod® ADAPTER ............................................. 114 trol Unit .................................................................. 169
Removal and Installation .......................................114 Bluetooth Control Unit Self-Diagnosis Function .... 170
AUDIO WITH NAVIGATION How to Proceed with Trouble Diagnosis ............... 171
Malfunction Code/Symptom Chart ........................ 171
SERVICE INFORMATION .......................... 115 Power Supply and Ground Circuit Inspection for
Bluetooth Control Unit ........................................... 171
PRECAUTIONS ............................................... 115 Steering Wheel Audio Control Switch Does Not
Precaution for Supplemental Restraint System Operate ................................................................. 172
(SRS) "AIR BAG" and "SEAT BELT PRE-TEN- Voice Activated Control Function Does Not Oper-
SIONER" ................................................................115 ate ......................................................................... 172
Precaution Necessary for Steering Wheel Rota- Removal and Installation ....................................... 174
tion After Battery Disconnect .................................115
REAR VIEW CAMERA ..................................... 177
PREPARATION ............................................... 117
Commercial Service Tool ......................................117

Revision: January 2010 AV-2 2010 Sentra


Component Parts and Harness Connector Loca- USB CONNECTOR AND AUX JACK ............. 183
tion ........................................................................ 177 Removal and Installation ....................................... 183 A
System Description ............................................... 177
Wiring Diagram - R/VIEW - ................................... 179 AUDIO ANTENNA ........................................... 184
Rear View Camera Power Supply and Ground Cir- Location of Antenna ............................................... 184
B
cuit Inspection ....................................................... 179 Removal and Installation of Roof Antenna ............ 184
Camera Image Signal Circuit ................................ 181
Removal and Installation ....................................... 182
GPS ANTENNA ............................................... 186
Location of Antenna ............................................... 186 C
Removal and Installation ....................................... 186

AV

Revision: January 2010 AV-3 2010 Sentra


PRECAUTIONS
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]

SERVICE INFORMATION
PRECAUTIONS
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT
PRE-TENSIONER" INFOID:0000000005485388

The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS
system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front
air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.
Information necessary to service the system safely is included in the SRS and SB section of this Service Man-
ual.
WARNING:
• To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in
the event of a collision which would result in air bag inflation, all maintenance must be performed by
an authorized NISSAN/INFINITI dealer.
• Improper maintenance, including incorrect removal and installation of the SRS can lead to personal
injury caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag
Module, see the SRS section.
• Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this
Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or har-
ness connectors.
PRECAUTIONS WHEN USING POWER TOOLS (AIR OR ELECTRIC) AND HAMMERS
WARNING:
• When working near the Airbag Diagnosis Sensor Unit or other Airbag System sensors with the Igni-
tion ON or engine running, DO NOT use air or electric power tools or strike near the sensor(s) with a
hammer. Heavy vibration could activate the sensor(s) and deploy the air bag(s), possibly causing
serious injury.
• When using air or electric power tools or hammers, always switch the Ignition OFF, disconnect the
battery, and wait at least 3 minutes before performing any service.
Precaution Necessary for Steering Wheel Rotation After Battery Disconnect
INFOID:0000000005485387

NOTE:
• This Procedure is applied only to models with Intelligent Key system and NATS (NISSAN ANTI-THEFT SYS-
TEM).
• Remove and install all control units after disconnecting both battery cables with the ignition knob in the
″LOCK″ position.
• Always use CONSULT-III to perform self-diagnosis as a part of each function inspection after finishing work.
If DTC is detected, perform trouble diagnosis according to self-diagnostic results.
For models equipped with the Intelligent Key system and NATS, an electrically controlled steering lock mech-
anism is adopted on the key cylinder.
For this reason, if the battery is disconnected or if the battery is discharged, the steering wheel will lock and
steering wheel rotation will become impossible.
If steering wheel rotation is required when battery power is interrupted, follow the procedure below before
starting the repair operation.
OPERATION PROCEDURE
1. Connect both battery cables.
NOTE:
Supply power using jumper cables if battery is discharged.
2. Use the Intelligent Key or mechanical key to turn the ignition switch to the ″ACC″ position. At this time, the
steering lock will be released.
3. Disconnect both battery cables. The steering lock will remain released and the steering wheel can be
rotated.
4. Perform the necessary repair operation.

Revision: January 2010 AV-4 2010 Sentra


PRECAUTIONS
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
5. When the repair work is completed, return the ignition switch to the ″LOCK″ position before connecting
the battery cables. (At this time, the steering lock mechanism will engage.) A
6. Perform a self-diagnosis check of all control units using CONSULT-III.

AV

Revision: January 2010 AV-5 2010 Sentra


PREPARATION
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
PREPARATION
Commercial Service Tool INFOID:0000000005283567

Tool name Description


Power tool Loosening bolts and nuts

PBIC0191E

Revision: January 2010 AV-6 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
AUDIO
A
Component Parts Location INFOID:0000000005283568

AV

AWNIA1993ZZ

Revision: January 2010 AV-7 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]

AWNIA1994ZZ

1. Front tweeter LH M46 (mid and pre- 2. Audio unit M43, M45, M53, M90 3. Front tweeter RH M47 (mid and pre-
mium system) (base and mid system) mium system)
4. AV control unit M92, M93, M94, M96, 5. Steering wheel audio control switch- 6. Front door speaker
M97 (premium system) es (if equipped) LH D10
RH D108
7. Rear speaker LH B27 (base, mid and 8. Rear speaker RH B39 (base, mid 9. Satellite radio tuner B56, B60 (with
premium without Rockford Fosgate and premium without Rockford Fos- satellite radio tuner)
system) gate system)
Rear speaker assembly LH B40 Rear speaker assembly RH B38
(premium system with Rockford Fos- (premium system with Rockford Fos-
gate) gate
10. Bluetooth control unit B15 (with 11. Audio amplifier B43, B44 (premium 12. iPod® adapter M91 (mid system,
Bluetooth) system with Rockford Fosgate) view with console side finisher - RH
removed)
13. iPod® connector M226 (mid system) 14. Rear view camera T21(with rear
USB interface M228 (premium sys- view camera)
tem)

iPod® is a trademark of Apple inc., registered in the U.S. and other countries.

System Description INFOID:0000000005283569

BASE AND MID SYSTEM


Refer to Owner's Manual for audio system operating instructions.
Power is supplied at all times
• through 20A fuse (No. 31, located in the fuse and fusible link box)
• to audio unit terminal 19.
With the ignition switch in the ACC or ON position, power is supplied
• through 10A fuse [No. 6, located in the fuse block (J/B)]
• to audio unit terminal 7.
Ground is supplied to
• audio unit terminal 28 (with mid system) and 20
• through grounds M57 and M61.
Then audio signals are supplied

Revision: January 2010 AV-8 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
• through audio unit terminals 2, 3, 4, 5, 11, 12, 13 and 14
• to terminals + and - of front door speaker LH and RH A
• to terminals + and - of front tweeter LH and RH (with mid system) and
• to terminals + and - of rear speaker LH and RH.
PREMIUM SYSTEM (WITHOUT ROCKFORD FOSGATE) B
Refer to Owner's Manual for audio system operating instructions.
Power is supplied at all times
• through 20A fuse (No. 31, located in the fuse and fusible link box) C
• to AV control unit terminal 19.
With the ignition switch in the ACC or ON position, power is supplied
• through 10A fuse [No. 6, located in the fuse block (J/B)]
• to AV control unit terminal 7. D
Ground is supplied to
• to AV control unit terminals 20, 27 and 47
• through grounds M57 and M61. E
Then audio signals are supplied
• through AV control unit terminals 2, 3, 4, 5, 11, 12, 13 and 14
• to terminals + and - of front door speaker LH and RH
• to terminals + and - of front tweeter LH and RH and F
• to terminals + and - of rear speaker LH and RH.
PREMIUM SYSTEM (WITH ROCKFORD FOSGATE)
G
Refer to Owner's Manual for audio system operating instructions.
Power is supplied at all times
• through 20A fuse [No. 17, located in the fuse block (J/B)]
• to audio amplifier terminal 17, H
• through 20A fuse (No. 31, located in the fuse and fusible link box)
• to audio amplifier terminal 1 and
• to AV control unit terminal 19. I
With the ignition switch in the ACC or ON position, power is supplied
• through 10A fuse [No. 6, located in the fuse block (J/B)]
• to AV control unit terminal 7.
Ground is supplied to J
• to AV control unit terminals 20, 27 and 47
• through grounds M57 and M61.
Ground is also supplied AV
• to audio amplifier terminals 4 and 20
• through grounds B7 and B19.
Then audio signals are supplied
• through AV control unit terminals 53, 54, 57, 58, 59, 60, 63, and 64 L
• to audio amplifier terminals 5, 6, 7, 8, 21, 22, 23 and 24.
Audio signals are amplified by the audio amplifier.
The amplified audio signals are supplied M
• through audio amplifier terminals 2, 3, 11, 12, 13, 14, 15, 16, 18, 19, 27, 28, 29, 30, 31 and 32
• to terminals + and - of front door speaker LH and RH and
• to terminals + and - of front tweeter LH and RH
• to terminals 1, 2, 3 and 4 of rear speaker assembly LH and RH. N

STEERING WHEEL AUDIO CONTROL SWITCHES (IF EQUIPPED)


When one of steering wheel audio control switches is pushed, the resistance in steering switch circuit changes O
depending on which button is pushed.
SATELLITE RADIO TUNER (IF EQUIPPED)
Power is supplied at all times P
• through 20A fuse (No. 31, located in the fuse and fusible link box)
• to satellite radio tuner terminal 32.
With the ignition switch in the ACC or ON position, power is supplied
• through 10A fuse [No. 6, located in the fuse block (J/B)]
• to satellite radio tuner terminal 36.
Ground is supplied through the case of the satellite radio tuner.
Then audio signals are supplied

Revision: January 2010 AV-9 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
• through satellite radio tuner terminals 21, 22, 23 and 24
• to audio unit terminals 45, 46, 47 and 48 (with mid system) or
• to AV control unit terminals 65, 66, 67 and 68 (with premium system).
SPEED SENSITIVE VOLUME SYSTEM (MID AND PREMIUM SYSTEM)
Volume level of this system goes up and down automatically in proportion to the vehicle speed. The control
level can be selected by the customer. Refer to Owner's Manual for operating instructions.

Revision: January 2010 AV-10 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
Schematic INFOID:0000000005283570

A
MID SYSTEM

AV

P
AANWA0181GB

Revision: January 2010 AV-11 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
PREMIUM SYSTEM (WITHOUT ROCKFORD FOSGATE)

AANWA0182GB

Revision: January 2010 AV-12 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
PREMIUM SYSTEM (WITH ROCKFORD FOSGATE)
A

AV

AANWA0183GB
P

Revision: January 2010 AV-13 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
Wiring Diagram - AUDIO - INFOID:0000000005283571

BASE SYSTEM

AANWA0184GB

Revision: January 2010 AV-14 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
MID SYSTEM
A

AV

AANWA0185GB
P

Revision: January 2010 AV-15 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]

AANWA0186GB

Revision: January 2010 AV-16 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
Without Bluetooth
A

AV

AANWA0187GB

Revision: January 2010 AV-17 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
With Bluetooth

AANWA0188GB

Revision: January 2010 AV-18 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]

AV

AANWA0189GB

Revision: January 2010 AV-19 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]

AANWA0190GB

Revision: January 2010 AV-20 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]

AV

AANWA0191GB

Revision: January 2010 AV-21 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
PREMIUM SYSTEM - WITHOUT ROCKFORD FOSGATE

AANWA0192GB

Revision: January 2010 AV-22 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]

AV

AANWA0193GB

Revision: January 2010 AV-23 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]

AANWA0195GB

Revision: January 2010 AV-24 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]

AV

AANWA0196GB

Revision: January 2010 AV-25 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]

AANWA0197GB

Revision: January 2010 AV-26 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]

AV

AANWA0198GB

Revision: January 2010 AV-27 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
PREMIUM SYSTEM - WITH ROCKFORD FOSGATE

AANWA0199GB

Revision: January 2010 AV-28 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]

AV

AANWA0200GB

Revision: January 2010 AV-29 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]

AANWA0201GB

Revision: January 2010 AV-30 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]

AV

AANWA0202GB

Revision: January 2010 AV-31 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]

AANWA0203GB

Revision: January 2010 AV-32 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]

AV

AANWA0204GB

Revision: January 2010 AV-33 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]

AANWA0205GB

Revision: January 2010 AV-34 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]

AV

AANWA0206GB

Revision: January 2010 AV-35 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
AV COMMUNICATION - WITH MID SYSTEM

AANWA0219GB

Revision: January 2010 AV-36 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
AV COMMUNICATION - WITH PREMIUM SYSTEM
A

AV

AANWA0220GB
P

Revision: January 2010 AV-37 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
Audio Unit (Base System) Harness Connector Terminal Layout INFOID:0000000005283572

WKIA5439E

Terminal and Reference Value for Audio Unit (Base System) INFOID:0000000005283573

Terminal
Signal Condition
(Wire color) Reference value
Item input/
Ignition (Approx.)
+ – output Operation
switch

2 (L) 3 (W) Audio signal front LH Output ON Receive audio signal

SKIB3609E

4 (G) 5 (V) Audio signal rear LH Output ON Receive audio signal

SKIB3609E

7 (GR) Ground ACC power supply Input ACC — Battery voltage

11 (P) 12 (R) Audio signal front RH Output ON Receive audio signal

SKIB3609E

13 (L) 14 (Y) Audio signal rear RH Output ON Receive audio signal

SKIB3609E

19 (Y) Ground Battery power supply Input OFF — Battery voltage


20 (B) Ground Ground — ON — —

Revision: January 2010 AV-38 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
Audio Unit (Mid System) Harness Connector Terminal Layout INFOID:0000000005283574

AWNIA1989GB

D
Terminal and Reference Value for Audio Unit (Mid System) INFOID:0000000005283575

E
Terminal
Signal Condition
(Wire color) Reference value Example of symp-
Item input/
Ignition (Approx.) tom F
+ – output Operation
switch

G
Audio sound No sound from
Receive audio
2 (L) 3 (W) signal front Output ON front door speaker
signal
LH LH or tweeter LH. H

SKIA0177E

Audio sound
Receive audio No sound from J
4 (G) 5 (V) signal rear Output ON
signal rear speaker LH.
LH

SKIA0177E AV
Press Phone/
0V
End switch
Press SEEK UP L
1.7V Steering wheel au-
Remote switch
6 (P) Ground Input ON dio controls do not
control A Press VOL UP
3.3V function
switch M
Except for
5.0V
above
Ignition switch System does not N
7 (GR) Ground ACC signal Input ON Battery voltage
ACC or ON work properly.

O
Audio sound No sound from
Receive audio
11 (P) 12 (R) signal front Output ON front door speaker
signal
RH RH or tweeter RH. P

SKIA0177E

Revision: January 2010 AV-39 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
Terminal
Signal Condition
(Wire color) Reference value Example of symp-
Item input/
Ignition (Approx.) tom
+ – output Operation
switch

Audio sound
Receive audio No sound from
13 (L) 14 (Y) signal rear Output ON
signal rear speaker RH.
RH

SKIA0177E

Remote Steering wheel au-


15 (LG) — control Input — — — dio controls do not
ground function
Press Phone/
0V
Send switch
Press SEEK
1.7V Steering wheel au-
Remote DOWN switch
16 (L) Ground Input ON dio controls do not
control B Press VOL
3.3V function
DOWN switch
Except for
5.0V
above

When vehicle
Vehicle
speed is approx.
18 (O) Ground speed signal Input ON Ground
40 km/h (25
(8-pulse)
MPH)

SKIA6649J

Battery pow- System does not


19 (Y) Ground Input — — Battery voltage
er work properly.
20 (B) Ground Ground — — — — —
AV commu-
Input/
25 (L) — nication sig- — — — —
Output
nal 1 (H)
AV commu-
Input/
26 (L) — nication sig- — — — —
Output
nal 1 (H)
AV commu-
Input/
27 (P) — nication sig- — — — —
Output
nal 1 (L)
28 (B) Ground Ground — — — — —
TEL ON sig-
32 (R) Ground Output ON — — —
nal
AV commu-
Input/
33 (P) — nication sig- — — — —
Output
nal 1 (L)

Revision: January 2010 AV-40 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
Terminal
Signal Condition
(Wire color) Reference value Example of symp- A
Item input/
Ignition (Approx.) tom
+ – output Operation
switch
Start confirma- B
tion/adjustment
mode, and then
Voice Micro-
TEL voice phone Test by
C
34 (BR) 35 (Y) Input ON —
audio signal selecting “Voice
Microphone
Test” on Hands- D
free Microphone SKIB3609E
screen.
36 (GR) — Shield — — — — —
E

iPod® au- F
With iPod® op-
37 (G) 41 (W) dio signal Input ON —
erating
LH

G
SKIB3609E

H
iPod® au-
With iPod® op-
39 (L) 43 (R) dio signal Input ON —
erating
RH
I

SKIB3609E

44 (GR) — Shield — — — — — J

Audio left
channel
No sound from sat-
AV
sound signal Receive audio
46 (R) 45 (G) Input ON ellite radio tuner
from satel- signal
left channel.
lite radio
tuner L
SKIA0177E

Audio right
M
channel
No sound from sat-
sound signal Receive audio
48 (B) 47 (W) Input ON ellite radio tuner
from satel- signal N
right channel.
lite radio
tuner
SKIA0177E
O
Shield
49 (GR) — ground (au- — — — 0V —
dio signal)
Shield P
50 (GR) — ground (da- — — — 0V —
ta)
Satellite ra-
Satellite radio tun-
dio tuner re- Turn audio unit
52 (L) Ground Input ON 5V er does not oper-
quest to ON
ate properly.
audio unit

Revision: January 2010 AV-41 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
Terminal
Signal Condition
(Wire color) Reference value Example of symp-
Item input/
Ignition (Approx.) tom
+ – output Operation
switch

Satellite radio tun-


er audio informa-
53 (LG) Ground Audio RX Input ON Receive data
tion does not
display properly.

SKIA4403E

Satellite radio tun-


er audio informa-
54 (V) Ground Audio TX Output ON Transmit data
tion does not
display properly.

SKIA4402E

AV Control Unit (Premium System without Rockford Fosgate) Harness Connector Ter-
minal Layout INFOID:0000000005548864

AWNIA1996ZZ

Terminal and Reference Value for AV Control Unit (Premium System without Rockford
Fosgate) INFOID:0000000005548863

Terminal
Signal Condition
(Wire color) Reference value Example of symp-
Item input/
Ignition (Approx.) tom
+ – output Operation
switch

Audio sound No sound from


Receive audio
2 (L) 3 (W) signal front Output ON front door speaker
signal
LH LH or tweeter LH.

SKIA0177E

Audio sound
Receive audio No sound from
4 (G) 5 (V) signal rear Output ON
signal rear speaker LH.
LH

SKIA0177E

Revision: January 2010 AV-42 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
Terminal
Signal Condition
(Wire color) Reference value Example of symp- A
Item input/
Ignition (Approx.) tom
+ – output Operation
switch
Press Phone/ B
0V
End switch
Press SEEK UP
1.7V Steering wheel au-
Remote switch C
6 (P) Ground Input ON dio controls do not
control A Press VOL UP
3.3V function
switch
Except for D
5.0V
above
Ignition switch System does not
7 (GR) Ground ACC signal Input ON Battery voltage
ACC or ON work properly. E

Audio sound No sound from F


Receive audio
11 (P) 12 (R) signal front Output ON front door speaker
signal
RH RH or tweeter RH.
G
SKIA0177E

H
Audio sound
Receive audio No sound from
13 (L) 14 (Y) signal rear Output ON
signal rear speaker RH.
RH I

SKIA0177E

Remote Steering wheel au-


J
15 (LG) — control Input — — — dio controls do not
ground function
Press Phone/ AV
0V
Send switch
Press SEEK
1.7V Steering wheel au-
Remote DOWN switch L
16 (L) Ground Input ON dio controls do not
control B Press VOL
3.3V function
DOWN switch
Except for
5.0V
M
above

N
When vehicle
Vehicle
speed is approx.
18 (O) Ground speed signal Input ON Ground
40 km/h (25
(8-pulse) O
MPH)

SKIA6649J

Battery pow- System does not P


19 (Y) Ground Input — — Battery voltage
er work properly.
20 (B) Ground Ground — ON — — —

Revision: January 2010 AV-43 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
Terminal
Signal Condition
(Wire color) Reference value Example of symp-
Item input/
Ignition (Approx.) tom
+ – output Operation
switch
Start confirma-
tion/adjustment
mode, and then
Voice Micro-
TEL voice phone Test by TEL voice audio
25 (BR) 24 (Y) Input ON
audio signal selecting “Voice signal
Microphone
Test” on Hands-
free Microphone SKIB3609E
screen.
26 (GR) — Shield — — — — —
AV commu-
Input/
28 (L) — nication sig- — — — —
Output
nal 1 (H)
AV commu-
Input/
29 (P) — nication sig- — — — —
Output
nal 1 (L)
30 (GR) — Shield — — — — —
AV commu-
Input/
31 (L) — nication sig- — — — —
Output
nal 1 (H)
AV commu-
Input/
32 (P) — nication sig- — — — —
Output
nal 1 (L)
Rear view
camera
33 (B) Ground — — — — Ground
ground sig-
nal
Rear view
Shift selector is
34 (R) Ground camera ON Output ON 6V Ground
in R position
signal

Rear view
With rear view
35 (L) Ground camera vid- Input ON Ground
camera ON
eo in (+)

SKIB2251J

Rear view
With rear view
36 (P) Ground camera vid- Input ON Ground
camera ON
eo in (-)

SKIB2251J

TEL ON sig-
41 (R) Ground Output ON — — —
nal
47 (B) Ground Ground — ON — — —
Reverse sig- Battery voltage Ground
50 (G) Ground Input R position
nal ON
Other than R position 0V

Revision: January 2010 AV-44 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
Terminal
Signal Condition
(Wire color) Reference value Example of symp- A
Item input/
Ignition (Approx.) tom
+ – output Operation
switch
B
Audio left
channel
No sound from sat-
sound signal Receive audio C
66 (R) 65 (G) Input ON ellite radio tuner
from satel- signal
left channel.
lite radio
tuner
SKIA0177E D

Audio right
channel E
No sound from sat-
sound signal Receive audio
68 (B) 67 (W) Input ON ellite radio tuner
from satel- signal
right channel.
lite radio
tuner F
SKIA0177E

Shield
69 (GR) — ground (au- — — — 0V — G
dio signal)
Shield
70 (GR) — ground (da- — — — 0V — H
ta)
Satellite ra-
Satellite radio tun-
dio tuner re- Turn audio unit I
72 (L) Ground Input ON 5V er does not oper-
quest to ON
ate properly.
audio unit

J
Satellite radio tun-
er audio informa-
73 (LG) Ground Audio RX Input ON Receive data
tion does not AV
display properly.

SKIA4403E
L

Satellite radio tun-


er audio informa-
M
74 (V) Ground Audio TX Output ON Transmit data
tion does not
display properly.
N
SKIA4402E

77 (B) — USB ground — — — — —


78 (W) — USB D- — — — — — O
USB V BUS
79 (R) — — — — — —
signal
80 (G) — USB D+ — — — — — P
81 (GR) — SHIELD — — — — —

AV Control Unit (Premium System with Rockford Fosgate) Harness Connector Termi-

Revision: January 2010 AV-45 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
nal Layout INFOID:0000000005283576

AWNIA1995ZZ

Terminal and Reference Value for AV Control Unit (Premium System with Rockford
Fosgate) INFOID:0000000005283577

Terminal
Signal Condition
(Wire color) Reference value Example of symp-
Item input/
Ignition (Approx.) tom
+ – output Operation
switch
Audio amplifier
Amp. ON/
1 (G) Ground Output ON — More than 6.5V does not work
OFF signal
properly.
Press Phone/
0V
End switch
Press SEEK UP
1.7V Steering wheel au-
Remote switch
6 (P) Ground Input ON dio controls do not
control A Press VOL UP
3.3V function
switch
Except for
5.0V
above
Ignition switch System does not
7 (GR) Ground ACC signal Input ON Battery voltage
ACC or ON work properly.
Remote Steering wheel au-
15 (LG) — control Input — — — dio controls do not
ground function
Press Phone/
0V
Send switch
Press SEEK
1.7V Steering wheel au-
Remote DOWN switch
16 (L) Ground Input ON dio controls do not
control B Press VOL
3.3V function
DOWN switch
Except for
5.0V
above

When vehicle
Vehicle
speed is approx.
18 (O) Ground speed signal Input ON Ground
40 km/h (25
(8-pulse)
MPH)

SKIA6649J

Battery pow- System does not


19 (Y) Ground Input — — Battery voltage
er work properly.
20 (B) Ground Ground — ON — — —

Revision: January 2010 AV-46 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
Terminal
Signal Condition
(Wire color) Reference value Example of symp- A
Item input/
Ignition (Approx.) tom
+ – output Operation
switch
Start confirma- B
tion/adjustment
mode, and then
Voice Micro-
TEL voice phone Test by TEL voice audio
C
25 (BR) 24 (Y) Input ON
audio signal selecting “Voice signal
Microphone
Test” on Hands- D
free Microphone SKIB3609E
screen.
26 (GR) — Shield — — — — —
E
AV commu-
Input/
28 (L) — nication sig- — — — —
Output
nal 1 (H)
AV commu-
F
Input/
29 (P) — nication sig- — — — —
Output
nal 1 (L)
30 (GR) — Shield — — — — — G
AV commu-
Input/
31 (L) — nication sig- — — — —
Output
nal 1 (H) H
AV commu-
Input/
32 (P) — nication sig- — — — —
Output
nal 1 (L)
I
Rear view
camera
33 (B) Ground — — — — Ground
ground sig-
nal J
Rear view
Shift selector is
34 (R) Ground camera ON Output ON 6V Ground
in R position
signal AV

Rear view
L
With rear view
35 (L) Ground camera vid- Input ON Ground
camera ON
eo in (+)
M
SKIB2251J

N
Rear view
With rear view
36 (P) Ground camera vid- Input ON Ground
camera ON
eo in (-) O

SKIB2251J
P
TEL ON sig-
41 (R) Ground Output ON — — —
nal
47 (B) Ground Ground — ON — — —
Reverse sig- Battery voltage Ground
50 (G) Ground Input R position
nal ON
Other than R position 0V

Revision: January 2010 AV-47 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
Terminal
Signal Condition
(Wire color) Reference value Example of symp-
Item input/
Ignition (Approx.) tom
+ – output Operation
switch

Audio sound No sound from


Receive audio
59 (W) 53 (B) signal front Output ON front door speaker
signal
LH LH or tweeter LH.

SKIA0177E

Audio sound No sound from


Receive audio
60 (LG) 54 (V) signal rear Output ON rear speaker as-
signal
LH sembly LH.

SKIA0177E

Shield
61 (GR) — — — — — —
ground

Audio sound No sound from


Receive audio
63 (R) 57 (L) signal front Output ON front door speaker
signal
RH RH or tweeter RH.

SKIA0177E

Audio sound No sound from


Receive audio
64 (BR) 58 (Y) signal rear Output ON rear speaker as-
signal
RH sembly RH.

SKIA0177E

Audio left
channel
No sound from sat-
sound signal Receive audio
66 (R) 65 (G) Input ON ellite radio tuner
from satel- signal
left channel.
lite radio
tuner
SKIA0177E

Audio right
channel
No sound from sat-
sound signal Receive audio
68 (B) 67 (W) Input ON ellite radio tuner
from satel- signal
right channel.
lite radio
tuner
SKIA0177E

Shield
69 (GR) — ground (au- — — — 0V —
dio signal)

Revision: January 2010 AV-48 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
Terminal
Signal Condition
(Wire color) Reference value Example of symp- A
Item input/
Ignition (Approx.) tom
+ – output Operation
switch
Shield B
70 (GR) — ground (da- — — — 0V —
ta)
Satellite ra-
Satellite radio tun- C
dio tuner re- Turn audio unit
72 (L) Ground Input ON 5V er does not oper-
quest to ON
ate properly.
audio unit
D

Satellite radio tun-


er audio informa- E
73 (LG) Ground Audio RX Input ON Receive data
tion does not
display properly.

F
SKIA4403E

G
Satellite radio tun-
er audio informa-
74 (V) Ground Audio TX Output ON Transmit data
tion does not
display properly. H

SKIA4402E

77 (B) — USB ground — — — — — I


78 (W) — USB D- — — — — —
USB V BUS
79 (R) — — — — — —
signal J
80 (G) — USB D+ — — — — —
81 (GR) — SHIELD — — — — —
AV
Audio Amplifier Harness Connector Terminal Layout INFOID:0000000005283578

N
WKIA5763E

Revision: January 2010 AV-49 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
Terminal and Reference Value for Audio Amplifier INFOID:0000000005283579

Terminal
Signal Condition
(wire color) Reference value Example of
Item input/
Ignition (Approx.) symptom
+ – output Operation
switch
System does not
1 (R) Ground Battery Input — — Battery voltage
work properly.

Receive audio No sound from


2 (W) 18 (B) Subwoofer LH Output ON
signal subwoofer LH.

SKIA0177E

Receive audio No sound from


3 (Y) 19 (L) Subwoofer RH Output ON
signal subwoofer RH.

SKIA0177E

4 (B) Ground Ground — ON — — —


Amp. ON sig- System does not
9 (G/R) Ground Input ON — More than 6.5V
nal work properly.

Rear speaker Receive audio No sound from rear


11 (V) 27 (B/Y) Output ON
LH signal speaker LH.

SKIA0177E

Rear speaker Receive audio No sound from rear


12 (R/Y) 28 (R/L) Output ON
RH signal speaker RH.

SKIA0177E

Front tweeter Receive audio No sound from


13 (W/R) 29 (L/B) Output ON
RH signal front tweeter RH.

SKIA0177E

Revision: January 2010 AV-50 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
Terminal
Signal Condition
(wire color) Reference value Example of A
Item input/
Ignition (Approx.) symptom
+ – output Operation
switch
B

Front tweeter Receive audio No sound from C


14 (R/G) 30 (B/R) Output ON
LH signal front tweeter LH.

SKIA0177E D

E
No sound from
Front door Receive audio
15 (L/W) 31 (L/R) Output ON front door speaker
speaker LH signal
LH.
F
SKIA0177E

No sound from
Front door Receive audio
16 (W/B) 32 (G/W) Output ON front door speaker
speaker RH signal
RH.
H

SKIA0177E
I
System does not
17 (G) Ground Battery Input — — Battery voltage
work properly.
20 (B) Ground Ground — ON — — —
J

No sound from
AV
Audio sound Receive audio front door speaker
21 (R) 5 (W) Input ON
signal front RH signal RH or front tweeter
RH.
L
SKIA0177E

M
No sound from
Audio sound Receive audio front door speaker
22 (W) 6 (B) Input ON
signal front LH signal LH or front tweeter
LH. N

SKIA0177E

Revision: January 2010 AV-51 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
Terminal
Signal Condition
(wire color) Reference value Example of
Item input/
Ignition (Approx.) symptom
+ – output Operation
switch

No sound from rear


Audio sound Receive audio
23 (L) 7 (B/W) Input ON speaker assembly
signal rear RH signal
RH.

SKIA0177E

No sound from rear


Audio sound Receive audio
24 (L/R) 8 (L/G) Input ON speaker assembly
signal rear LH signal
LH.

SKIA0177E

IPod Adapter Harness Connector Terminal Layout INFOID:0000000005548856

AWNIA2015ZZ

Terminal and Reference Value for IPod Adapter INFOID:0000000005548857

Terminal
Description
(Wire color) Reference value
Condition
Input/ (Approx.)
+ – Signal name
Output

Ignition
1 13 When iPod® mode is se-
iPod® sound signal LH Output switch
(G) (W) lected.
ON

SKIB3609E

Ignition
2 14 When iPod® mode is se-
iPod® sound signal RH Output switch
(L) (R) lected.
ON

SKIB3609E

Revision: January 2010 AV-52 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
Terminal
Description
(Wire color) Reference value A
Condition
Input/ (Approx.)
+ – Signal name
Output
Ignition B
3
Ground ACC power supply Input switch — Battery voltage
(GR)
ACC
4

AV communication signal Input/
— — — C
(G) (L) Output
Ignition
5
Ground Battery power supply Input switch — Battery voltage D
(Y)
OFF
Ignition
6 7
iPod® USD signal — switch — —
(G) (SB) E
ON
Ignition
8
Ground iPod® battery charge Output switch Connected to iPod®. Battery voltage
(O)
ON F

Ignition The wave pattern is dis-


9 Communication signal
Ground Output switch played just after iPod® con-
(LG) (iPod® adapter→iPod®) H
ON nection.
JPNIA0462GB

NOTE:
After the wave pattern display, I
the value continues Approx 3.3V

J
Ignition
10 Communication signal
Ground Input switch Connected to iPod®.
(V) (iPod®→iPod® adapter)
ON
AV

JPNIA0462GB

11
Ignition L
Ground ACCESSORY-IDENTIFY — switch Connected to iPod®. 0V
(W)
ON

Ignition
12 Ground When iPod® mode is se-
iPod® sound signal RH Input switch
(R) lected. N
ON

SKIB3609E
O
15
— Shield — — — —
(GR)
16 AV communication signal Input/ P
— — — —
(R) (H) Output
Ignition
17
Ground Ground — switch — 0V
(P)
ON
19
— Shield — — — —
(GR)

Revision: January 2010 AV-53 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
Terminal
Description
(Wire color) Reference value
Condition
Input/ (Approx.)
+ – Signal name
Output
Ignition
20
Ground iPod® battery charge Output switch Connected to iPod®. 5.0V
(O)
ON
Ignition Not connected to iPod®. 4.0V
21 iPod® connection recogni-
Ground Input switch
(V) tion signal Connected to iPod®. 0V
ON
Ignition
22
Ground ACCESSORY-DETECT — switch Connected to iPod®. 0V
(Y)
ON
23
— Shield — — — —
(GR)

Ignition
24 When iPod® mode is se-
Ground iPod® sound signal LH Input switch
(G) lected.
ON

SKIB3609E

Satellite Radio Tuner Harness Connector Terminal Layout INFOID:0000000005283580

LKIA0735E

Revision: January 2010 AV-54 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
Terminal and Reference Value for Satellite Radio Tuner INFOID:0000000005283581

Terminal
Signal Condition
(Wire color) Voltage
Item input/ B
Ignition (Approx.)
+ – output Operation
switch

22 (R) 21 (G) Audio signal LH Output ON Receive audio signal. D

SKIB3609E
E

F
24 (B) 23 (W) Audio signal RH Output ON Receive audio signal.

G
SKIB3609E

REQ1 Set to the satellite radio


28 (L) Ground Output ON
(SAT-AUDIO) mode
I

SKIB3825E

29 (W/R) Ground
Communication signal
Output ON
Set to the satellite radio AV
(SAT-AUDIO) mode

SKIB3824E
L

M
Communication signal Set to the satellite radio
30 (B/R) Ground Input ON
(AUDIO-SAT) mode
N
SKIB3826E

32 (Y) Battery power supply OFF


Ground — Battery voltage O
36 (V) ACC power supply Input ACC
37 — Antenna signal — — —
P
Trouble Diagnosis INFOID:0000000005283584

The majority of the audio troubles are the result of outside causes (bad CD, electromagnetic interference,
etc.). Check the inspection items below to diagnose the malfunction.
MALFUNCTION WITH RADIO AND CD (BASE AND MID SYSTEM)

Revision: January 2010 AV-55 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]

Symptom Possible cause


• Audio unit power supply circuit check. Refer to AV-58, "Audio Unit (Base and
Mid System) Power and Ground Supply Circuit Inspection".
Inoperative
If above check is OK, replace audio unit. Refer to AV-81, "Removal and Instal-
lation".
• Steering switch check. Refer to AV-67, "Steering Switch Check (With Blue-
tooth)" or AV-69, "Steering Switch Check (Without Bluetooth)".
Steering switch does not operate (mid system)
If above check is OK, replace audio unit. Refer to AV-81, "Removal and Instal-
lation".
All speakers do not sound • Audio unit
• Front door speaker check. Refer to AV-70, "Sound Is Not Heard from Front
Door Speaker or Front Tweeter (Base and Mid System)".
One or several speakers do not sound
• Rear speaker check. Refer to AV-73, "Sound Is Not Heard from Rear Speak-
er (Base and Mid System)".
• Audio unit
Poor sound
• Speaker
• Audio unit
Noisy
• Electrical equipment (generator, bonding wire, etc.)

MALFUNCTION WITH RADIO AND CD (PREMIUM SYSTEM)

Symptom Possible cause


• AV control unit power supply circuit check. Refer to AV-58, "Audio Unit (Base
and Mid System) Power and Ground Supply Circuit Inspection".
Inoperative
If above check is OK, replace AV control unit. Refer to AV-81, "Removal and
Installation".
• Steering switch check. Refer to AV-67, "Steering Switch Check (With Blue-
tooth)".
Steering switch does not operate
If above check is OK, replace AV control unit. Refer to AV-81, "Removal and
Installation".
• AV control unit
• Audio amplifier power supply and ground circuit check. Refer to AV-60, "Au-
All speakers do not sound dio Amplifier Power and Ground Supply Circuit Inspection".
• Audio amplifier ON signal
• Audio amplifier
• Front door speaker check. Refer to AV-75, "Sound Is Not Heard from Front
Door Speaker or Front Tweeter (Premium System with Rockford Fosgate)".
• Rear speaker check. Refer to AV-78, "Sound Is Not Heard from Rear Speak-
One or several speakers do not sound
er Assembly (Premium System with Rockford Fosgate)" or AV-74, "Sound Is
Not Heard from Rear Speaker (Premium System without Rockford Fosgate)"
.
• AV control unit
Poor sound • Audio amplifier
• Speaker
• AV control unit
Noisy • Audio amplifier
• Electrical equipment (generator, bonding wire, etc.)

FOR RADIO ONLY (PREMIUM SYSTEM)

Revision: January 2010 AV-56 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]

Symptom Possible cause A


• AV control unit
No sound
• Antenna feeder, wiring or connections
• AV control unit B
• AV control unit ground
• Antenna feeder, wiring or connections
Noisy
• Noise prevention parts
• Electrical equipment C
• Wire harness of each piece of electrical equipment
• AV control unit power supply circuit. Refer to AV-59, "AV Control
All radio stations stored in memory are deleted
Unit (Premium System) Power and Ground Supply Circuit Inspec- D
tion".
• Audio unit
NOTE: E
The following noise results from variations in field strength, such as fading noise and multi-path noise, or
external noise from trains and other sources. It is not a malfunction.
• Fading noise: This noise occurs because of variations in the field strength in a narrow range due to moun-
tains or buildings blocking the signal. F
• Multi-path noise: This noise results from the waves sent directly from the broadcast station arriving at the
antenna at a different time from the waves which reflect off mountains or buildings.
FOR CD ONLY G

Symptom Possible cause


H
CD cannot be inserted.
CD cannot be ejected. • CD
The CD cannot be played. • Audio unit
I
The sound skips, stops suddenly, or is distorted.

FOR SATELLITE RADIO TUNER ONLY J

Symptom Possible cause


• Satellite radio tuner power and ground circuit inspection. Refer to AV-60, AV
"Satellite Radio Tuner Power and Ground Supply Circuit Inspection".
• Satellite radio tuner communication circuit inspection. Refer to AV-61, "Sat-
ellite Radio Tuner Communication Circuit Inspection (Mid System)" or AV-
Inoperative
63, "Satellite Radio Tuner Communication Circuit Inspection (Premium Sys- L
tem)".
If above check is OK, replace satellite radio tuner. Refer to AV-81, "Removal
and Installation".
M
• Satellite radio tuner right channel audio signal circuit inspection. Refer to AV-
66, "Satellite Radio Tuner Right Channel Audio Signal Circuit Inspection (Mid
System)" or AV-67, "Satellite Radio Tuner Right Channel Audio Signal Circuit
Inspection (Premium System)". N
• Satellite radio tuner left channel audio signal circuit inspection. Refer to AV-
Right or left channel does not sound
64, "Satellite Radio Tuner Left Channel Audio Signal Circuit Inspection (Mid
System)" or AV-65, "Satellite Radio Tuner Left Channel Audio Signal Circuit
Inspection (Premium System)". O
If above check is OK, replace satellite radio tuner. Refer to AV-81, "Removal
and Installation".
• Location of vehicle. Make certain vehicle is in an open area.
P
Poor reception • Satellite radio antenna or antenna feeder. Refer to AV-87, "Location of An-
tenna".
• Satellite radio tuner ground.
• Satellite radio tuner harness shield wires.
Noisy
• Electrical equipment (generator, bonding wire, etc.). Refer to AV-58, "Noise
Inspection".

Revision: January 2010 AV-57 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
Noise Inspection INFOID:0000000005283585

The vehicle itself can be a source of noise if noise prevention parts or electrical equipment is malfunctioning.
Check if noise is caused and/or changed by engine speed, ignition switch turned to each position, and opera-
tion of each piece of electrical equipment, and determine the cause.
NOTE:
The source of the noise can be found easily by listening to the noise while removing the fuses of electrical
components, one by one.
TYPE OF NOISE AND POSSIBLE CAUSE

Occurrence condition Possible cause


A continuous growling noise occurs. The speed of
Ignition components
the noise varies with changes in the engine speed.
Occurs only when engine is ON. A whistling noise occurs while the engine speed is
high. A booming noise occurs while the engine is Generator
running and the lighting switch is ON.
A cracking or snapping sound occurs with the op-
Noise only occurs when various Relay malfunction, radio malfunction
eration of various switches.
electrical components are oper-
ating. The noise occurs when various motors are operat- • Motor case ground
ing. • Motor
• Rear defogger coil malfunction
The noise occurs constantly, not just under certain conditions.
• Open circuit in printed heater
• Ground wire of body parts.
A cracking or snapping sound occurs while the vehicle is being driven, especially when
• Ground due to improper part installation
it is vibrating excessively.
• Wiring connections or a short circuit

Audio Unit (Base and Mid System) Power and Ground Supply Circuit Inspection
INFOID:0000000005283586

1.CHECK FUSE
Check that the following fuses of the audio amplifier (premium system) and audio unit are not blown.

Unit Terminals Signal name Fuse No.


19 Battery power 31
Audio unit
7 Ignition switch ACC or ON 6
OK or NG
OK >> GO TO 2.
NG >> If fuse is blown, be sure to eliminate cause of malfunction before installing new fuse. Refer to PG-
16, "Fuse".
2.AUDIO UNIT POWER SUPPLY CIRCUIT CHECK
1. Disconnect audio unit connector.
2. Check voltage between the audio unit connector and ground.

Terminal No.
Unit (+) OFF ACC ON
(-)
Connector Terminal
Battery Battery Battery
19 Ground
voltage voltage voltage
Audio unit M43
Battery Battery
7 Ground 0V
voltage voltage
OK or NG
OK >> GO TO 3. WKIA5769E

NG >> • Check connector housings for disconnected or loose


terminals.
Revision: January 2010 AV-58 2010 Sentra
AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
• Repair harness or connector.
3.GROUND CIRCUIT CHECK A

Check continuity between audio unit harness connector M43 termi-


nals 28 (mid system), 20 and ground.
B
Continuity should exist.
OK or NG C
OK >> Inspection End.
NG >> • Check connector housings for disconnected or loose
terminals.
D
• Repair harness or connector.
AWNIA1998ZZ

AV Control Unit (Premium System) Power and Ground Supply Circuit Inspection E
INFOID:0000000005549051

1.CHECK FUSE F
Check that the following fuses of the AV control unit are not blown.

Unit Terminals Signal name Fuse No. G


19 Battery power 31
AV control unit
7 Ignition switch ACC or ON 6
H
OK or NG
OK >> GO TO 2.
NG >> If fuse is blown, be sure to eliminate cause of malfunction before installing new fuse. Refer to PG- I
3.
2.AV CONTROL UNIT POWER SUPPLY CIRCUIT CHECK
1. Disconnect AV control unit connector. J
2. Check voltage between the AV control unit connector and ground.

Terminal No. AV
Unit (+) OFF ACC ON
(-)
Connector Terminal
L
Battery Battery Battery
19 Ground
AV control voltage voltage voltage
M92
unit Battery Battery
7 Ground 0V
voltage voltage M

OK or NG
OK >> GO TO 3. WKIA5769E
N
NG >> • Check connector housings for disconnected or loose
terminals.
• Repair harness or connector.
3.GROUND CIRCUIT CHECK O

Revision: January 2010 AV-59 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
Check continuity between AV control unit harness connectors M92,
M93 terminals 20, 27, 47 and ground.

Continuity should exist.


OK or NG
OK >> Inspection End.
NG >> • Check connector housings for disconnected or loose
terminals.
• Repair harness or connector.
AWNIA1999ZZ

Audio Amplifier Power and Ground Supply Circuit Inspection INFOID:0000000005549052

1.CHECK FUSE
Check that the following fuses of the audio amplifier are not blown.

Unit Terminals Signal name Fuse No.


17 Battery power 17
Audio amplifier
1 Battery power 31
OK or NG
OK >> GO TO 2.
NG >> If fuse is blown, be sure to eliminate cause of malfunction before installing new fuse. Refer to PG-
3.
2.AUDIO AMPLIFIER POWER SUPPLY CIRCUIT CHECK
1. Disconnect audio amplifier connector.
2. Check voltage between audio amplifier connector and ground.

Terminal No.
Unit (+) OFF ACC ON
(-)
Connector Terminal

Audio am- 1 Battery Battery


B44 Ground 0V
plifier 17 voltage voltage

OK or NG
OK >> GO TO 3. WKIA3722E
NG >> • Check connector housings for disconnected or loose
terminals.
• Repair harness or connector.
3.GROUND CIRCUIT CHECK
Check continuity between audio amplifier harness connector B44
terminals 4, 20 and ground.

Continuity should exist.


OK or NG
OK >> Inspection End.
NG >> • Check connector housings for disconnected or loose
terminals.
• Repair harness or connector.
WKIA3723E

Satellite Radio Tuner Power and Ground Supply Circuit Inspection INFOID:0000000005283587

1.CHECK FUSES
Revision: January 2010 AV-60 2010 Sentra
AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
Check that the following fuses are not blown.
A
Unit Terminals Signal name Fuse No.
32 Battery power 31
Satellite radio tuner B
36 Ignition switch ACC or ON 6
OK or NG
OK >> GO TO 2. C
NG >> If fuse is blown, be sure to eliminate cause of malfunction before installing new fuse. Refer to PG-
3.
2.POWER SUPPLY CIRCUIT CHECK D
1. Turn ignition switch OFF.
2. Disconnect satellite radio tuner connector B56.
3. Check voltage between the satellite radio tuner and ground. E

Terminal No.
Unit (+) OFF ACC ON F
(-)
Connector Terminal
Battery Battery Battery
32 Ground
Satellite voltage voltage voltage G
B56
radio tuner Battery Battery
36 Ground 0V
voltage voltage
OK or NG H
OK >> GO TO 3. WKIA4539E

NG >> • Check connector housings for disconnected or loose


terminals. I
• Repair harness or connector.
3.GROUND CIRCUIT CHECK
J
Inspect satellite radio tuner case ground.
OK or NG
OK >> Inspection End. AV
NG >> Repair satellite radio tuner case ground.
Satellite Radio Tuner Communication Circuit Inspection (Mid System) INFOID:0000000005283588

L
1.CHECK HARNESS - 1
1. Turn ignition switch OFF.
2. Disconnect satellite radio tuner connector B56 and audio unit connector M45. M
3. Check continuity between satellite radio tuner harness connec-
tor B56 (A) terminal 28 and audio unit harness connector M45
(B) terminal 52. N

Continuity should exist.


4. Check continuity between satellite radio tuner harness connec- O
tor B56 (A) terminal 28 and ground.

Continuity should not exist. P


OK or NG AWNIA2000ZZ

OK >> GO TO 2.
NG >> Repair harness or connector.
2.CHECK HARNESS - 2

Revision: January 2010 AV-61 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
1. Check continuity between satellite radio tuner harness connec-
tor B56 (A) terminal 29 and audio unit harness connector M45
(B) terminal 53.

Continuity should exist.


2. Check continuity between satellite radio tuner harness connec-
tor B56 (A) terminal 29 and ground.

Continuity should not exist.


OK or NG AWNIA2001ZZ

OK >> GO TO 3.
NG >> Repair harness or connector.
3.CHECK HARNESS - 3
1. Check continuity between satellite radio tuner harness connec-
tor B56 (A) terminal 30 and audio unit harness connector M45
(B) terminal 54.

Continuity should exist.


2. Check continuity between satellite radio tuner harness connec-
tor B56 (A) terminal 30 and ground.

Continuity should not exist.


OK or NG AWNIA2002ZZ

OK >> GO TO 4.
NG >> Repair harness or connector.
4.CHECK REQ1 SIGNAL
1. Connect satellite radio tuner connector and audio unit connector.
2. Turn ignition switch to ACC.
3. Check signal between satellite radio tuner harness connector
B56 terminal 28 and ground with CONSULT-III or oscilloscope.

28 - Ground : Refer to AV-55, "Terminal


and Reference Value for Satel-
lite Radio Tuner".
OK or NG
OK >> GO TO 5.
NG >> Replace audio unit. Refer to AV-81, "Removal and
Installation". WKIA4544E

5.CHECK TXD SIGNAL


Check signal between satellite radio tuner harness connector B56
terminal 29 and ground with CONSULT-III or oscilloscope.

29 - Ground : Refer to AV-55, "Terminal


and Reference Value for Satel-
lite Radio Tuner".
OK or NG
OK >> GO TO 6.
NG >> Replace audio unit. Refer to AV-81, "Removal and
Installation". WKIA4545E

6.CHECK RXD SIGNAL

Revision: January 2010 AV-62 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
Check signal between satellite radio tuner harness connector B56
terminal 30 and ground with CONSULT-III or oscilloscope. A

30 - Ground : Refer to AV-55, "Terminal


and Reference Value for Satel- B
lite Radio Tuner".
OK or NG
OK >> Replace satellite radio tuner. Refer to AV-81, "Removal C
and Installation".
NG >> Replace audio unit. Refer to AV-81, "Removal and WKIA4546E
Installation". D
Satellite Radio Tuner Communication Circuit Inspection (Premium System) INFOID:0000000005549769

1.CHECK HARNESS - 1 E
1. Turn ignition switch OFF.
2. Disconnect satellite radio tuner connector B56 and AV control unit connector M96.
3. Check continuity between satellite radio tuner harness connec- F
tor B56 (A) terminal 28 and AV control unit harness connector
M96 (B) terminal 72.
G
Continuity should exist.
4. Check continuity between satellite radio tuner harness connec-
tor B56 (A) terminal 28 and ground. H

Continuity should not exist.


OK or NG AWNIA2005ZZ
I
OK >> GO TO 2.
NG >> Repair harness or connector.
2.CHECK HARNESS - 2 J

1. Check continuity between satellite radio tuner harness connec-


tor B56 (A) terminal 29 and AV control unit harness connector
M96 (B) terminal 73. AV

Continuity should exist.


L
2. Check continuity between satellite radio tuner harness connec-
tor B56 (A) terminal 29 and ground.

Continuity should not exist. M

OK or NG AWNIA2006ZZ

OK >> GO TO 3. N
NG >> Repair harness or connector.
3.CHECK HARNESS - 3
1. Check continuity between satellite radio tuner harness connec- O
tor B56 (A) terminal 30 and AV control unit harness connector
M96 (B) terminal 74.
P
Continuity should exist.
2. Check continuity between satellite radio tuner harness connec-
tor B56 (A) terminal 30 and ground.

Continuity should not exist.


OK or NG AWNIA2007ZZ

Revision: January 2010 AV-63 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
OK >> GO TO 4.
NG >> Repair harness or connector.
4.CHECK REQ1 SIGNAL
1. Connect satellite radio tuner connector and AV control unit connector.
2. Turn ignition switch to ACC.
3. Check signal between satellite radio tuner harness connector
B56 terminal 28 and ground with CONSULT-III or oscilloscope.

28 - Ground : Refer to AV-55, "Terminal


and Reference Value for Satel-
lite Radio Tuner".
OK or NG
OK >> GO TO 5.
NG >> Replace AV control unit. Refer to AV-81, "Removal and
Installation". WKIA4544E

5.CHECK TXD SIGNAL


Check signal between satellite radio tuner harness connector B56
terminal 29 and ground with CONSULT-III or oscilloscope.

29 - Ground : Refer to AV-55, "Terminal


and Reference Value for Satel-
lite Radio Tuner".
OK or NG
OK >> GO TO 6.
NG >> Replace AV control unit. Refer to AV-81, "Removal and
Installation". WKIA4545E

6.CHECK RXD SIGNAL


Check signal between satellite radio tuner harness connector B56
terminal 30 and ground with CONSULT-III or oscilloscope.

30 - Ground : Refer to AV-55, "Terminal


and Reference Value for Satel-
lite Radio Tuner".
OK or NG
OK >> Replace satellite radio tuner. Refer to AV-81, "Removal
and Installation".
NG >> Replace AV control unit. Refer to AV-81, "Removal and WKIA4546E
Installation".
Satellite Radio Tuner Left Channel Audio Signal Circuit Inspection (Mid System)
INFOID:0000000005283589

1.CHECK HARNESS
1. Turn ignition switch OFF.
2. Disconnect satellite radio tuner connector B56 (A) and audio unit connector M45 (B).
3. Check continuity between satellite radio tuner and audio unit.

Revision: January 2010 AV-64 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]

Terminals A
Satellite radio tuner Audio unit Continuity
Connector Terminal Connector Terminal
21 45
B
A: B56 B: M45 Yes
22 46
4. Check continuity between satellite radio tuner and ground. C

Terminals
AWNIA2003ZZ
Satellite radio tuner Continuity D

Connector Terminal
21
A: B56 Ground No E
22
OK or NG
OK >> GO TO 2. F
NG >> Repair harness or connector.
2.CHECK LEFT CHANNEL AUDIO SIGNAL
1. Connect satellite radio tuner and audio unit. G
2. Turn ignition switch ON.
3. Check signal between satellite radio tuner connector B56 termi-
nals 21 and 22 with CONSULT-III or oscilloscope. H

21 - 22 : Refer to AV-55, "Terminal


and Reference Value for Sat-
I
ellite Radio Tuner".
OK or NG
OK >> Replace audio unit. Refer to AV-81, "Removal and J
Installation".
NG >> Replace satellite radio tuner. Refer to AV-81, "Removal WKIA4548E
and Installation".
AV
Satellite Radio Tuner Left Channel Audio Signal Circuit Inspection (Premium System)
INFOID:0000000005549770

L
1.CHECK HARNESS
1. Turn ignition switch OFF.
2. Disconnect satellite radio tuner connector B56 (A) and AV control unit connector M96 (B). M
3. Check continuity between satellite radio tuner and AV control unit.

Terminals
N
Satellite radio tuner AV control unit Continuity
Connector Terminal Connector Terminal
21 65 O
A: B56 B: M96 Yes
22 66
4. Check continuity between satellite radio tuner and ground.
P
Terminals
AWNIA2008ZZ
Satellite radio tuner Continuity

Connector Terminal
21
A: B56 Ground No
22

Revision: January 2010 AV-65 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
OK or NG
OK >> GO TO 2.
NG >> Repair harness or connector.
2.CHECK LEFT CHANNEL AUDIO SIGNAL
1. Connect satellite radio tuner and AV control unit.
2. Turn ignition switch ON.
3. Check signal between satellite radio tuner connector B56 termi-
nals 21 and 22 with CONSULT-III or oscilloscope.

21 - 22 : Refer to AV-55, "Terminal


and Reference Value for Sat-
ellite Radio Tuner".
OK or NG
OK >> Replace AV control unit. Refer to AV-81, "Removal and
Installation".
NG >> Replace satellite radio tuner. Refer to AV-81, "Removal WKIA4548E
and Installation".
Satellite Radio Tuner Right Channel Audio Signal Circuit Inspection (Mid System)
INFOID:0000000005283590

1.CHECK HARNESS
1. Turn ignition switch OFF.
2. Disconnect satellite radio tuner connector B56 (A) and audio unit connector M45 (B).
3. Check continuity between satellite radio tuner and audio unit.

Terminals
Satellite radio tuner Audio unit Continuity
Connector Terminal Connector Terminal
23 47
A: B56 B: M45 Yes
24 48
4. Check continuity between satellite radio tuner and ground.

Terminals
AWNIA2004ZZ
Satellite radio tuner Continuity

Connector Terminal
23
A: B56 Ground No
24
OK or NG
OK >> GO TO 2.
NG >> Repair harness or connector.
2.CHECK RIGHT CHANNEL AUDIO SIGNAL
1. Connect satellite radio tuner and audio unit.
2. Turn ignition switch ON.

Revision: January 2010 AV-66 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
3. Check signal between satellite radio tuner connector B56 termi-
nals 23 and 24 with CONSULT-III or oscilloscope. A

23 - 24 : Refer to AV-55, "Terminal


and Reference Value for Sat- B
ellite Radio Tuner".
OK or NG
OK >> Replace audio unit. Refer to AV-81, "Removal and C
Installation".
NG >> Replace satellite radio tuner. Refer to AV-81, "Removal WKIA4550E
and Installation". D
Satellite Radio Tuner Right Channel Audio Signal Circuit Inspection (Premium System)
INFOID:0000000005549771

E
1.CHECK HARNESS
1. Turn ignition switch OFF.
2. Disconnect satellite radio tuner connector B56 (A) and AV control unit connector M96 (B). F
3. Check continuity between satellite radio tuner and AV control unit.

Terminals G
Satellite radio tuner AV control unit Continuity
Connector Terminal Connector Terminal
23 67 H
A: B56 B: M96 Yes
24 68
4. Check continuity between satellite radio tuner and ground. I

Terminals AWNIA2009ZZ

Satellite radio tuner Continuity J



Connector Terminal
23
A: B56 Ground No AV
24
OK or NG
OK >> GO TO 2. L
NG >> Repair harness or connector.
2.CHECK RIGHT CHANNEL AUDIO SIGNAL
1. Connect satellite radio tuner and AV control unit. M
2. Turn ignition switch ON.
3. Check signal between satellite radio tuner connector B56 termi-
nals 23 and 24 with CONSULT-III or oscilloscope. N

23 - 24 : Refer to AV-55, "Terminal


and Reference Value for Sat- O
ellite Radio Tuner".
OK or NG
OK >> Replace AV control unit. Refer to AV-81, "Removal and P
Installation".
NG >> Replace satellite radio tuner. Refer to AV-81, "Removal WKIA4550E
and Installation".
Steering Switch Check (With Bluetooth) INFOID:0000000005283591

1.CHECK HARNESS
Revision: January 2010 AV-67 2010 Sentra
AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
1. Turn ignition switch OFF.
2. Disconnect Bluetooth control unit connector B15 and spiral cable connector M30.
3. Check continuity between Bluetooth control unit connector B15 (A) terminals 12, 13, and 14 and spiral
cable connector M30 (B) terminals 25, 31, and 33.

Terminals
A B Continuity
Connector Terminal Connector Terminal
12 33
B15 13 M30 31 Yes
14 25
4. Check continuity between Bluetooth control unit and ground.
WKIA5775E

Terminals
(+) Continuity
(–)
Connector Terminal
12
B15
13 Ground No
14
OK or NG
OK >> GO TO 2.
NG >> Repair harness.
2.CHECK HARNESS
1. Disconnect audio unit connector M43 (mid system) or AV control unit M92 (premium system).
2. Check continuity between audio unit connector M43 (mid system) or AV control unit M92 (premium sys-
tem) (A) terminals 6, 15, and 16 and Bluetooth control unit connector B15 (B) terminals 17, 19, and 18.

Terminals
(A) (B) Continuity
Connector Terminal Connector Terminal
M43 (mid 6 17
system)
15 19
M92 (pre- B15 Yes
mium sys-
16 18
tem)
OK or NG WKIA5776E
OK >> GO TO 3.
NG >> Repair harness.
3.SPIRAL CABLE CHECK
1. Disconnect spiral cable connector M78.
2. Check continuity between spiral cable terminals.

15 - 33 : Continuity should exist.


17 - 31 : Continuity should exist.
19 - 25 : Continuity should exist.
OK or NG
OK >> GO TO 4.
NG >> Replace spiral cable. Refer to SRS-33, "Removal and
Installation".
WKIA5777E

Revision: January 2010 AV-68 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]

4.CHECK STEERING SWITCH RESISTANCE A


Check resistance between spiral cable connector M78 terminals.

Resistance B
Terminal Signal name Condition (Ω)
(Approx.)
Seek (down) Depress Seek down switch. 165
C
17 19 Phone/Send Depress Phone/Send switch. 0
Volume (down) Depress volume down switch. 487
Seek (up) Depress Seek up switch. 165 D
15 19 Phone/End Depress Phone/End switch. 0
WKIA5778E
Volume (up) Depress volume up switch. 487
E
OK or NG
OK >> Inspection End.
NG >> Replace steering switch. Refer to AV-81, "Removal and Installation". F
Steering Switch Check (Without Bluetooth) INFOID:0000000005283592

1.CHECK HARNESS G
1. Turn ignition switch OFF.
2. Disconnect audio unit connector M43 and spiral cable connector M30.
3. Check continuity between audio unit connector terminal and spi- H
ral cable connector terminal.

Terminals I
A B Continuity
Connector Terminal Connector Terminal
J
6 33
M43 15 M30 25 Yes
16 31 AV
WKIA5807E
4. Check continuity between audio unit and ground.

Terminals L
A Continuity
(–)
Connector Terminal
M
6
M43 15 Ground No
16 N
OK or NG
OK >> GO TO 2.
NG >> Repair harness. O
2.SPIRAL CABLE CHECK
1. Disconnect spiral cable connector M78. P

Revision: January 2010 AV-69 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
2. Check continuity between spiral cable terminals.

15 - 33 : Continuity should exist.


17 - 31 : Continuity should exist.
19 - 25 : Continuity should exist.
OK or NG
OK >> GO TO 3.
NG >> Replace spiral cable. Refer to SRS-33, "Removal and
Installation".
WKIA5777E

3.CHECK STEERING SWITCH RESISTANCE


Check resistance between spiral cable connector M78 terminals.

Resistance
Terminal Signal name Condition (Ω)
(Approx.)
Seek (down) Depress (station) down switch. 165
17 19 Power Depress power switch. 0
Volume (down) Depress volume down switch. 487
Seek (up) Depress (station) up switch. 165
15 19 Mode Depress mode switch. 0
WKIA5778E
Volume (up) Depress volume up switch. 487
OK or NG
OK >> Inspection End.
NG >> Replace steering switch. Refer to AV-81, "Removal and Installation".
Sound Is Not Heard from Front Door Speaker or Front Tweeter (Base and Mid System)
INFOID:0000000005283593

1.HARNESS CHECK
1. Disconnect audio unit connector and front door speaker and front tweeter (mid system) connector (LH or
RH).
2. Check continuity between audio unit harness connector terminal
and front door speaker and front tweeter (mid system) harness
connector terminal.

Terminals
Audio unit Speaker or tweeter Continuity
Connector Terminal Connector Terminal
2 +
B: M46*
3 -
11 +
B: M47*
12 -
A: M43 Yes
2 +
B: D10
3 -
11 +
B: D108
12 -
*: With mid system
3. Check continuity between audio unit harness connector terminal
and ground.
WKIA5444E

Revision: January 2010 AV-70 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]

Terminals A
Audio unit Continuity

Connector Terminal
B
2
3
A: M43 Ground No
11 C
12
OK or NG
D
OK >> GO TO 2.
NG >> • Check connector housings for disconnected or loose terminals.
• Repair harness or connector.
E
2.FRONT SPEAKER SIGNAL CHECK
1. Connect audio unit connector, front door speaker connector and front tweeter (mid system) connector.
2. Turn ignition switch to ACC. F
3. Push “POWER” switch.
4. Check the signal between audio unit connector terminals with
CONSULT-III or oscilloscope.
G
Terminals
(+) (-) Condi- Reference H
tion signal
Con- Termi- Con- Termi-
nector nal nector nal
2 3 I

Receive
M43 M43 audio J
11 12 signal

SKIA0177E
AV
OK or NG
OK >> Replace front speaker. Refer to AV-81, "Removal and
Installation". L
NG >> Replace audio unit. Refer to AV-81, "Removal and
Installation".
WKIA5853E M

Sound Is Not Heard from Front Door Speaker or Front Tweeter (Premium System with-
out Rockford Fosgate) INFOID:0000000005549044
N

1.HARNESS CHECK
1. Disconnect AV control unit connector and front door speaker and front tweeter connector (LH or RH). O

Revision: January 2010 AV-71 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
2. Check continuity between AV control unit harness connector ter-
minal and front door speaker and front tweeter harness connec-
tor terminal.

Terminals
AV control unit Speaker or tweeter Continuity
Connector Terminal Connector Terminal
2 +
B: M46
3 -
11 +
B: M47
12 -
A: M92 Yes
2 +
B: D10
3 -
11 +
B: D108
12 -
3. Check continuity between AV control unit harness connector ter-
minal and ground.

Terminals WKIA5444E

AV control unit Continuity



Connector Terminal
2
3
A: M92 Ground No
11
12
OK or NG
OK >> GO TO 2.
NG >> • Check connector housings for disconnected or loose terminals.
• Repair harness or connector.
2.FRONT SPEAKER SIGNAL CHECK
1. Connect AV control unit connector, front door speaker connector and front tweeter connector.
2. Turn ignition switch to ACC.
3. Push “POWER” switch.

Revision: January 2010 AV-72 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
4. Check the signal between AV control unit connector terminals
with CONSULT-III or oscilloscope. A

Terminals
(+) (-) Condi- Reference B
tion signal
Con- Termi- Con- Termi-
nector nal nector nal
2 3
C

Receive
M92 M92 audio
D
11 12 signal

SKIA0177E
E

OK or NG
OK >> Replace front speaker. Refer to AV-81, "Removal and F
Installation".
NG >> Replace AV control unit. Refer to AV-81, "Removal and
Installation".
G
WKIA5853E

Sound Is Not Heard from Rear Speaker (Base and Mid System) INFOID:0000000005283594

H
1.HARNESS CHECK
1. Disconnect audio unit connector and rear speaker connector.
2. Check continuity between audio unit harness connector terminal I
and rear speaker harness connector terminal.

Terminals J
Audio unit Speaker Continuity
Connector Terminal Connector Terminal
AV
4 +
B: B27
5 -
A: M43 Yes
13 + L
B: B39
14 -
3. Check continuity between audio unit harness connector terminal
and ground. M

Terminals
N
Audio unit Continuity

Connector Terminal
4 O
5
A: M43 Ground No WKIA5353E
13
P
14
OK or NG
OK >> GO TO 2.
NG >> • Check connector housings for disconnected or loose terminals.
• Repair harness or connector.
2.REAR SPEAKER SIGNAL CHECK
Revision: January 2010 AV-73 2010 Sentra
AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
1. Connect audio unit connector and rear speaker connector.
2. Turn ignition switch to ACC.
3. Push “POWER” switch.
4. Check the signal between audio unit harness connector termi-
nals with CONSULT-III or oscilloscope.

Terminals
(+) (-)
Condi- Reference
Con- Con- tion signal
Termi- Termi-
nec- nec-
nal nal
tor tor
4 5

Re-
ceive
M43 M43
13 14 audio
signal

SKIA0177E

OK or NG
OK >> Replace speaker. Refer to AV-81, "Removal and Instal-
lation".
NG >> Replace audio unit. Refer to AV-81, "Removal and
Installation".
WKIA5808E

Sound Is Not Heard from Rear Speaker (Premium System without Rockford Fosgate)
INFOID:0000000005549045

1.HARNESS CHECK
1. Disconnect AV control unit connector and rear speaker connector.
2. Check continuity between AV control unit harness connector ter-
minal and rear speaker harness connector terminal.

Terminals
AV control unit Speaker Continuity
Connector Terminal Connector Terminal
4 +
B: B27
5 -
A: M92 Yes
13 +
B: B39
14 -
3. Check continuity between AV control unit harness connector ter-
minal and ground.

Terminals
AV control unit Continuity

Connector Terminal
4
5
A: M92 Ground No WKIA5353E
13
14
OK or NG
OK >> GO TO 2.

Revision: January 2010 AV-74 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
NG >> • Check connector housings for disconnected or loose terminals.
• Repair harness or connector. A
2.REAR SPEAKER SIGNAL CHECK
1. Connect AV control unit connector and rear speaker connector.
B
2. Turn ignition switch to ACC.
3. Push “POWER” switch.
4. Check the signal between AV control unit harness connector ter-
minals with CONSULT-III or oscilloscope. C

Terminals
(+) (-) D
Condi- Reference
Con- Con- tion signal
Termi- Termi-
nec- nec-
nal nal
tor tor E
4 5

Re- F
ceive
M92 M92
13 14 audio
signal
G
SKIA0177E

OK or NG
H
OK >> Replace speaker. Refer to AV-81, "Removal and Instal-
lation".
NG >> Replace AV control unit. Refer to AV-81, "Removal and
Installation". I
WKIA5808E

Sound Is Not Heard from Front Door Speaker or Front Tweeter (Premium System with
J
Rockford Fosgate) INFOID:0000000005283595

1.HARNESS CHECK
AV
1. Turn ignition switch OFF.
2. Disconnect audio amplifier connector B43 and suspect speaker connector.
L

Revision: January 2010 AV-75 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
3. Check continuity between audio amplifier harness connector ter-
minal and suspect speaker harness connector terminal.

Terminals
Audio amplifier Speaker or tweeter Continuity
Connector Terminal Connector Terminal
15 +
D10
31 -
16 +
D108
32 -
B43 Yes
14 -
M46
30 +
13 -
M47
29 +
4. Check continuity between audio amplifier harness connector ter-
minal and ground.

Terminals
WKIA3372E
Audio amplifier Continuity

Connector Terminal
13
14
15
16
B43 Ground No
29
30
31
32
OK or NG
OK >> GO TO 2.
NG >> • Check connector housings for disconnected or loose terminals.
• Repair harness or connector.
2.FRONT SPEAKER SIGNAL CHECK
1. Connect audio amplifier connector B43 and suspect speaker connector.
2. Turn ignition switch to ACC.
3. Push “POWER” switch.
4. Check the signal between audio amplifier harness connector ter-
minals with CONSULT-III or oscilloscope.

LKIA0602E

Revision: January 2010 AV-76 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]

Terminals A
(+) (-) Condi- Reference
tion signal
Con- Termi- Con- Termi-
nector nal nector nal B
13 29
14 30
Re- C
15 31 ceive
B43 B43
audio
signal
16 32 D
SKIA0177E

OK or NG E
OK >> Replace suspect speaker. Refer to AV-81, "Removal and Installation".
NG >> GO TO 3.
3.HARNESS CHECK F
1. Turn ignition switch OFF.
2. Disconnect AV control unit connector M94 and audio amplifier connector B43.
3. Check continuity between AV control unit harness connector ter- G
minals and audio amplifier harness connector terminals.

Terminals H
AV control unit Audio amplifier Continuity
Connector Terminal Connector Terminal
I
53 6
59 22
A: M94 B: B43 Yes
57 5 J
63 21
4. Check continuity between AV control unit harness connector ter-
minals and ground. AV

Terminals
L
AV control unit Continuity

Connector Terminal
53 M
57
A: M94 Ground No AWNIA2016ZZ
59
63
N

OK or NG
OK >> GO TO 4. O
NG >> • Check connector housings for disconnected or loose terminals.
• Repair harness or connector.
4.FRONT SPEAKER SIGNAL CHECK P
1. Connect AV control unit connector and audio amplifier connector.
2. Turn ignition switch to ACC.
3. Push “POWER” switch.

Revision: January 2010 AV-77 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
4. Check the signal between AV control unit harness connector ter-
minals with CONSULT-III or oscilloscope.

Terminals
(+) (-) Condi- Reference
tion signal
Con- Termi- Con- Termi-
nector nal nector nal
59 53

Receive
M94 M94 audio
63 57 signal

SKIA0177E

OK or NG
OK >> Replace audio amplifier. Refer to AV-81, "Removal and
Installation".
NG >> Replace AV control unit. Refer to AV-81, "Removal and
Installation".
AWNIA2017ZZ

Sound Is Not Heard from Rear Speaker Assembly (Premium System with Rockford
Fosgate) INFOID:0000000005283596

1.HARNESS CHECK
1. Turn ignition switch OFF.
2. Disconnect audio amplifier connectors B43, B44 and suspect speaker connector.
3. Check continuity between audio amplifier harness connector ter-
minal and suspect speaker harness connector terminal.

Terminals
Audio amplifier Speaker Continuity
Connector Terminal Connector Terminal
11 4
C: B40
27 3
A: B43
12 4
C: B38
28 3
Yes
2 2
C: B40
18 1
B: B44
3 2
C: B38
19 1
4. Check continuity between audio amplifier harness connector ter-
minals and ground.

WKIA5816E

Revision: January 2010 AV-78 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]

Terminals A
Audio amplifier Continuity

Connector Terminal
B
11
27
A: B43
12 C
28
Ground No
2
D
18
B: B44
3
19 E
OK or NG
OK >> GO TO 2.
NG >> • Check connector housings for disconnected or loose terminals. F
• Repair harness or connector.
2.REAR SPEAKER SIGNAL CHECK
G
1. Connect audio amplifier connectors B43, B44 and suspect speaker connector.
2. Turn ignition switch to ACC.
3. Push “POWER” switch.
4. Check the signal between audio amplifier harness connector ter- H
minals with CONSULT-III or oscilloscope.

Terminals I
(+) (-)
Condi- Reference
Con- Con- tion signal
nec- Terminal nec- Terminal J
tor tor

A: 11 A: 27
B43 B43 AV
12 28
Re-
2 18 ceive
audio L
B: B:
signal
B44 3 B44 19
SKIA0177E
M
OK or NG
OK >> Replace suspect speaker. Refer to AV-81, "Removal
and Installation".
NG >> GO TO 3. N

WKIA5817E

3.HARNESS CHECK O
1. Turn ignition switch OFF.
2. Disconnect AV control unit connector M94 and audio amplifier connector B43.
P

Revision: January 2010 AV-79 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
3. Check continuity between AV control unit harness connector ter-
minals and audio amplifier harness connector terminals.

Terminals
AV control unit Audio amplifier Continuity
Connector Terminal Connector Terminal
54 8
60 24
A: M94 B: B43 Yes
58 7
64 23
4. Check continuity between AV control unit harness connector ter-
minal and ground.

Terminals
AV control unit Continuity

Connector Terminal
54
58
A: M94 Ground No AWNIA2018ZZ
60
64
OK or NG
OK >> GO TO 4.
NG >> • Check connector housings for disconnected or loose terminals.
• Repair harness or connector.
4.REAR SPEAKER SIGNAL CHECK
1. Connect AV control unit connector M94 and audio amplifier connector B43.
2. Turn ignition switch to ACC.
3. Push “POWER” switch.
4. Check the signal between audio unit harness connector termi-
nals with CONSULT-III or oscilloscope.

Terminals
(+) (-) Condi- Reference
tion signal
Con- Con-
Terminal Terminal
nector nector
60 54

Re-
ceive
M94 M94
64 58 audio
signal

SKIA0177E

OK or NG
OK >> Replace audio amplifier. Refer to AV-81, "Removal and
Installation".
NG >> Replace AV control unit. Refer to AV-81, "Removal and
Installation".
AWNIA2019ZZ

Revision: January 2010 AV-80 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
Removal and Installation INFOID:0000000005283597

A
AUDIO UNIT

J
LKIA0867E

1. Display unit 2. Display unit connector 3. Audio unit connector


AV
4. Audio unit A. Cluster lid C bracket screws

Removal
1. Disconnect the battery negative terminal. L
2. Remove the cluster lid C. Refer to IP-11.
3. Remove the display unit to audio unit harness.
M
4. Remove the cluster lid C bracket screws.
5. Remove the audio unit and display unit (if equipped).
Installation N
Installation is in the reverse order of removal.
FRONT TWEETER
O
Removal
1. Remove the front pillar garnish. Refer to EI-34.
2. Remove the front tweeter grille. P

Revision: January 2010 AV-81 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
3. Remove the front tweeter screws (A), disconnect the front
tweeter connector and remove the front tweeter (1).

LKIA0855E

Installation
Installation is in the reverse order of removal.
FRONT DOOR SPEAKER
Removal
1. Remove the front door finisher. Refer to EI-31.
2. Remove the front door speaker screws (A), disconnect the front
door speaker connector and remove the front door speaker (1).

LKIA0856E

Installation
Installation is in the reverse order of removal.
REAR SPEAKER
Removal
1. Remove the rear parcel shelf finisher. Refer to EI-38, "Removal and Installation".
2. Remove the rear speaker screws (A), disconnect the rear
speaker connector and remove the rear speaker (1).

LKIA0857E

Installation
Installation is in the reverse order of removal.
AUDIO AMPLIFIER

Revision: January 2010 AV-82 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]

H
LKIA0865E

1. Audio amplifier 2. Audio amplifier connectors A. Bolts


⇒ Front I

Removal
1. Disconnect the battery negative terminal. J
2. Slide the RH front seat toward the front to remove the audio amplifier rear bolts.
3. Slide the RH front seat toward the rear to remove the audio amplifier front bolts.
4. Disconnect the audio amplifier connectors and remove the audio amplifier. AV
Installation
Installation is in the reverse order of removal.
L
SATELLITE RADIO TUNER

Revision: January 2010 AV-83 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]

LKIA0858E

1. Satellite radio tuner connector 2. Satellite radio tuner B. Bolts


⇒ Front

Removal
1. Remove the luggage side finisher (LH). Refer to EI-44, "Removal and Installation".
2. Remove the satellite radio tuner bolts.
3. Disconnect the satellite radio tuner connector and remove the satellite radio tuner.
4. If necessary, remove the satellite radio tuner bracket bolts (A)
and remove the satellite radio tuner brackets (1).

LKIA0859E

Installation
Installation is in the reverse order of removal.
STEERING WHEEL AUDIO CONTROL SWITCHES
Removal
1. Remove the driver air bag module. Refer to SRS-31, "Removal and Installation".

Revision: January 2010 AV-84 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
2. Remove the steering wheel audio control switch screws (A) and
remove the steering wheel audio control switches (1). A

LKIA0860E

D
Installation
Installation is in the reverse order of removal.

AV

Revision: January 2010 AV-85 2010 Sentra


USB CONNECTOR AND AUX JACK
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
USB CONNECTOR AND AUX JACK
Removal and Installation INFOID:0000000005485390

REMOVAL
1. Remove the center console assembly. Refer to IP-12, "Removal and Installation".
2. Push the pawl from the back of the center console to remove the
USB connector and aux jack (1).

ALNIA1209ZZ

INSTALLATION
Installation is in the reverse order of removal.

Revision: January 2010 AV-86 2010 Sentra


AUDIO ANTENNA
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
AUDIO ANTENNA
A
Location of Antenna INFOID:0000000005283598

AV

L
LKIA0862E

1. Roof antenna 2. Roof antenna base connectors 3. Antenna feeder M


4. Antenna feeder connector 5. Audio unit (base and mid system) 6. Roof antenna base
AV control unit (premium system)
7. Satellite radio tuner antenna feeder 8. Satellite radio tuner antenna feeder 9. Satellite radio tuner antenna feeder
connector connector N
10. Satellite radio tuner A. Antenna feeder clips B. Satellite radio tuner antenna feeder
clips
O
Removal and Installation of Roof Antenna INFOID:0000000005283599

REMOVAL P
1. Partially remove the rear body side welts. Refer to EI-41, "Removal and Installation".
2. Remove rear pillar finishers. Refer to EI-41, "Removal and Installation".
3. Remove rear assist grip (LH). Refer to EI-41, "Removal and Installation".
4. Remove three headliner rear clips. Pull down the rear part of the headliner to reposition out of the way.
CAUTION:
Use care when repositioning headliner to avoid causing damage.

Revision: January 2010 AV-87 2010 Sentra


AUDIO ANTENNA
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
5. Disconnect the roof antenna harness connectors (B).
6. Remove the roof antenna nut (A) and remove the roof antenna
(1).

LKIA0863E

INSTALLATION
Installation is in the reverse order of removal.

Revision: January 2010 AV-88 2010 Sentra


TELEPHONE
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
TELEPHONE
A
Component Parts and Harness Connector Location INFOID:0000000005283600

AV

M
AWNIA1983GB

1. Bluetooth control unit B15, B62 2. Steering wheel audio control 3. Microphone R4
switches N
4. Combination meter M24 5. Audio unit M43, M53 (with mid 6. AV control unit M92, M93 (with premium
system) system)

O
System Description INFOID:0000000005283601

BLUETOOTH® HANDS-FREE PHONE SYSTEM P


Refer to the Owner's Manual for Bluetooth telephone system operating instructions.
NOTE:
Cellular telephones must have their wireless connection set up (paired) before using the Bluetooth telephone
system.

Bluetooth telephone system allows users who have a Bluetooth cellular telephone to make a wireless connec-
tion between their cellular telephone and the Bluetooth control unit. Hands-free cellular telephone calls can be

Revision: January 2010 AV-89 2010 Sentra


TELEPHONE
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
sent and received. Some Bluetooth cellular telephones may not be recognized by the Bluetooth control unit.
When a cellular telephone or the Bluetooth control unit is replaced, the telephone must be paired with the
Bluetooth control unit. Different cellular telephones may have different pairing procedures. Refer to the cellular
telephone operating manual.
Bluetooth Telephone System Diagram

AWNIA1984GB

Bluetooth Control Unit


When the ignition switch is turned to ACC or ON, the Bluetooth con-
trol unit will power up. During power up, the Bluetooth control unit is
initialized and performs various self checks. Initialization may take
up to 20 seconds. If a phone is present in the vehicle and paired with
the Bluetooth control unit, Nissan Voice Recognition will then
become active. Bluetooth telephone functions can be turned off
using the Nissan Voice Recognition system.

WKIA5781E

Steering Wheel Audio Control Switches


When buttons on the steering wheel audio control switch are
pushed, the resistance in steering wheel audio control switch circuit
changes depending on which button is pushed. The Bluetooth con-
trol module uses this signal to perform various functions while navi-
gating through the voice recognition system.
The following functions can be performed using the steering wheel
audio control switch:
• Initiate Self Diagnosis of the Bluetooth telephone system
• Start a voice recognition session
• Answer and end telephone calls
• Adjust the volume of calls
WKIA5783E

Volume Switch (with mid system)

Revision: January 2010 AV-90 2010 Sentra


TELEPHONE
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
Call volume can be adjusted using the audio unit volume switch.
A

AWNIA1985GB

D
Volume Switch (with premium system)
Call volume can be adjusted using the AV control unit volume switch.

G
AWNIA1986GB

Bluetooth Microphone H
The Bluetooth microphone is located in the roof console assembly.
The Bluetooth microphone sends a signal to the Bluetooth control
unit. The Bluetooth microphone can be actively tested during self-
diagnosis. I

AV
AWNIA1987GB

Audio Unit (with mid system)


The audio unit receives signals from the Bluetooth control unit and L
sends audio signals to the speakers.

AWNIA1985GB O
AV Control Unit (with premium system)

Revision: January 2010 AV-91 2010 Sentra


TELEPHONE
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
The AV control unit receives signals from the Bluetooth control unit
and sends audio signals to the speakers.

AWNIA1986GB

Revision: January 2010 AV-92 2010 Sentra


TELEPHONE
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
Wiring Diagram - H/PHON - INFOID:0000000005283602

A
MID SYSTEM

AV

P
AANWA0207GB

Revision: January 2010 AV-93 2010 Sentra


TELEPHONE
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]

AANWA0208GB

Revision: January 2010 AV-94 2010 Sentra


TELEPHONE
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
PREMIUM SYSTEM
A

AV

AANWA0209GB
P

Revision: January 2010 AV-95 2010 Sentra


TELEPHONE
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]

AANWA0210GB

Revision: January 2010 AV-96 2010 Sentra


TELEPHONE
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
Bluetooth Control Unit Harness Connector Terminal Layout INFOID:0000000005283603

AWNIA1988GB

D
Terminal and Reference Value for Bluetooth Control Unit INFOID:0000000005283604

E
Terminal
Signal Condition
(Wire color) Reference value
Item input/ Example of symptom
Ignition (Approx.) F
+ – output Operation
switch
Battery pow- System does not
1 (Y) Ground Input — — Battery voltage
er work properly. G
ACC/ System does not
2 (V) Ground ACC power Input — Battery voltage
ON work properly.

3 (W/L) Ground IGN power Input


ON/
— Battery voltage
System does not H
START work properly.
4 (B) — Ground — — — — —
5 (GR) — Shield — — — — — I
6 (GR) — Shield — — — — —

ACC/ When giving a Bluetooth Micro-


7 (W) 8 (R) Mic-in signal Input
ON voice phone inoperative. AV

PKIB5037J
L

Bluetooth con- M
ACC/ Audio can not be
9 (G) 10 (L) Audio out Output trol unit sends
ON heard.
audio signal

N
SKIB3609E

11 (Y/V) — Mute Output — — 5V Mute inoperative.


Press MODE O
0V
switch
Press SEEK UP
Remote 0.75V Steering wheel audio
ACC/ switch
12 (R/W) Ground control Input control switches do P
ON Press VOL UP
switch 1 2V not function.
switch
Except for
5V
above

Revision: January 2010 AV-97 2010 Sentra


TELEPHONE
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
Terminal
Signal Condition
(Wire color) Reference value
Item input/ Example of symptom
Ignition (Approx.)
+ – output Operation
switch
Press POWER
0V
switch
Press SEEK
Remote 0.75V Steering wheel audio
ACC/ DOWN switch
13 (G/W) Ground control Input control switches do
ON Press VOL
switch 2 2V not function.
DOWN switch
Except for
5V
above
Remote Steering wheel audio
14 (W/V) — control Input — — — control switches do
ground not function.
Press Phone/
0V
End switch
Press SEEK UP
0.75V Steering wheel audio
Audio unit ACC/ switch
17 (W/R) Ground Output controls do not func-
switch 1 ON Press VOL UP
2V tion.
switch
Except for
5V
above
Press Phone/
0V
Send switch
Press SEEK
0.75V Steering wheel audio
Audio unit ACC/ DOWN switch
18 (LG/B) Ground Output controls do not func-
switch 2 ON Press VOL
2V tion.
DOWN switch
Except for
5V
above
Audio unit Steering wheel audio
19 (V/W) Ground switch Output — — — controls do not func-
ground tion.
21 (B) — Cont-2 — — — — —
22 *1 (B) — Cont-3 — — — — —
23 *2 (B) — Cont-4 — — — — —

When vehicle
Vehicle
speed is approx.
28 (G/Y) Ground speed signal Input ON —
40 km/h (25
(8–pulse)
MPH)

PKIC0643E

Bluetooth
Bluetooth Micro-
29 (B) Ground Microphone Output — — 5V
phone inoperative.
power
Bluetooth
33 — antenna sig- Input — — — —
nal
34 — Shield — — — — —
35 (L) — M CAN + — — — — —
36 (P) — M CAN - — — — — —

Revision: January 2010 AV-98 2010 Sentra


TELEPHONE
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
Terminal
Signal Condition
(Wire color) Reference value A
Item input/ Example of symptom
Ignition (Approx.)
+ – output Operation
switch
37 *2 M CAN B
— — — — — —
(GR) shield
39 *1 M CAN
— — — — — —
(Y/R) jumper 1 C
40 *1
— M CAN 1 — — — — —
(Y/R)
41 *1 M CAN D
— — — — — —
(SB) jumper 2
42 *1
— M CAN 2 — — — — —
(SB) E
*1 With Mid System
*2 With Premium System
F
Bluetooth Control Unit Self-Diagnosis Function INFOID:0000000005283605

The Bluetooth control unit has two diagnostic checks. The first diagnostic check is performed automatically
every ignition cycle during control unit initialization. The second diagnostic check is performed by the techni- G
cian using the steering wheel audio control switches prior to trouble diagnosis.
BLUETOOTH CONTROL UNIT INITIALIZATION CHECKS
• Internal control unit failure H
• Bluetooth antenna connection open or shorted
• Steering wheel audio control switches (SEND/END) stuck closed
• Vehicle speed pulse count I
• Bluetooth Microphone connection test (with playback to operator)
• Bluetooth inquiry check
SELF-DIAGNOSIS MODE J
1. Turn ignition switch to ACC or ON.
2. Wait for the Bluetooth system to complete initialization. This may take up to 20 seconds.
3. Press and hold the steering wheel audio control switch SEND AV
button for at least 1.5 seconds. The Bluetooth system will begin
to play a verbal prompt.
L

WKIA5789E N

4. While the prompt is playing, momentarily press the steering


wheel audio control switch END button. The Bluetooth system O
will sound a 10 second beep.
5. While the beep is sounding, momentarily press the steering
wheel audio control switch END button again.
6. The Bluetooth system has now entered into the diagnostic P
mode. Results of the diagnostic checks will be verbalized to the
technician. Refer to AV-100, "Malfunction Code/Symptom
Chart".
7. If there are no failure records to report, the speed pulse count
will be reported next.
AWKIA1579ZZ

Revision: January 2010 AV-99 2010 Sentra


TELEPHONE
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
8. After the speed pulse count is reported, an interactive Bluetooth microphone test will be performed. Follow
the voice prompt. If the Bluetooth microphone test fails refer to AV-100, "Malfunction Code/Symptom
Chart".
9. Self-diagnosis mode is complete. A short beep is heard.
How to Proceed with Trouble Diagnosis INFOID:0000000005283606

1. Confirm the symptom or customer complaint.


2. Perform Bluetooth control unit self-diagnosis. Refer to AV-99, "Bluetooth Control Unit Self-Diagnosis
Function".
3. According to the symptom chart, repair or replace the cause of the symptom. Refer to AV-100, "Malfunc-
tion Code/Symptom Chart".
4. Does the Bluetooth system operate normally? If so, GO TO 5. If not, GO TO 2.
5. Inspection End.
Malfunction Code/Symptom Chart INFOID:0000000005283607

Code/Symptom Failure Message Action


Replace Bluetooth control unit. Refer to AV-
1 "Internal failure"
105, "Removal and Installation".
2 "Bluetooth antenna open" 1. Inspect harness connection.
2. Replace Bluetooth antenna. Refer to
3 "Bluetooth antenna shorted" AV-105, "Removal and Installation".
"Phone/Send for the Hands Free Phone
4 Check steering wheel audio control switch-
System is stuck"
es. Refer to AV-101, "Steering Wheel Audio
"Phone/End for the Hands Free Phone Control Switch Does Not Operate".
5
System is stuck"
1. Inspect harness between Bluetooth
control unit and Bluetooth micro-
"Bluetooth Microphone test" (failed interac-
– phone.
tive test)
2. Replace Bluetooth microphone. Refer
to AV-105, "Removal and Installation".
1. Inspect Bluetooth control unit power
supply and ground circuits. Refer to
AV-100, "Power Supply and Ground
Bluetooth system is inoperative – Circuit Inspection for Bluetooth Con-
trol Unit".
2. Replace Bluetooth control unit. Refer
to AV-105, "Removal and Installation".
Steering wheel audio control switch does Refer to AV-101, "Steering Wheel Audio

not operate Control Switch Does Not Operate".
Refer to AV-102, "Voice Activated Control
Voice activated control does not operate –
Function Does Not Operate".

Power Supply and Ground Circuit Inspection for Bluetooth Control Unit INFOID:0000000005283608

1.CHECK FUSES
Make sure the following fuses for the Bluetooth control unit are not blown.

Terminals
Ignition Switch Fuse No.
Connector Terminal
1 All positions 22
B15 2 ACC/ON 6
3 ON/START 12
OK or NG
OK >> GO TO 2.

Revision: January 2010 AV-100 2010 Sentra


TELEPHONE
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
NG >> If fuse is blown, be sure to eliminate cause of malfunction before installing new fuse. Refer to PG-
3. A
2.CHECK POWER SUPPLY CIRCUIT
1. Disconnect Bluetooth control unit connector B15.
B
2. Check voltage between connector terminals and ground as fol-
lows.

Terminals Ignition switch position C


(+)
(–) OFF ACC ON
Connector Terminal
D
Battery Battery Battery
1
voltage voltage voltage
Battery Battery
B15 2 Ground 0V
voltage voltage
E
WKIA4389E

Battery
3 0V 0V
voltage
F
OK or NG
OK >> GO TO 3.
NG >> Check harness for open between Bluetooth control unit and fuse.
G
3.CHECK GROUND CIRCUITS
1. Turn ignition switch OFF.
2. Check continuity between the following Bluetooth control unit H
terminals and ground.

Terminals I
Continuity
Connector Terminal —
4
21 J
B15 Ground Yes
22 (with mid system)
23 (with premium system)
AWNIA1990ZZ AV
OK or NG
OK >> Inspection End.
NG >> Repair or replace harness. L
Steering Wheel Audio Control Switch Does Not Operate INFOID:0000000005283609

1.CHECK STEERING WHEEL AUDIO CONTROL SWITCH M


Check steering wheel audio control switch. Refer to AV-67, "Steering Switch Check (With Bluetooth)".
OK or NG
N
OK >> GO TO 2.
NG >> Replace steering wheel audio control switch. AV-81, "Removal and Installation".
2.CHECK AUDIO UNIT O
1. Turn ignition switch ON.

Revision: January 2010 AV-101 2010 Sentra


TELEPHONE
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
2. Check voltage between audio unit harness connector M43 (with
mid system) or AV control unit harness M92 (with premium sys-
tem) terminals 6, 16 and ground.

6 - Ground : Approx. 5V
16 - Ground : Approx. 5V
OK or NG
OK >> Replace audio unit (with mid system). Refer to AV-81,
"Removal and Installation".
OK >> Replace AV control unit (with premium system). Refer to WKIA5793E
AV-81, "Removal and Installation".
NG >> GO TO 3.
3.CHECK BLUETOOTH CONTROL UNIT
Check voltage between Bluetooth control unit harness connector
B15 terminals 17, 18 and ground.

17 - Ground : Approx. 5V
18 - Ground : Approx. 5V
OK or NG
OK >> Repair or replace harness.
NG >> Replace Bluetooth control unit. AV-105, "Removal and
Installation".
WKIA5794E

Voice Activated Control Function Does Not Operate INFOID:0000000005283610

NOTE:
Even under normal condition, Bluetooth voice guidance may not occur when pressing steering wheel audio
control switch.
BLUETOOTH VOICE GUIDANCE IS HEARD WHEN PRESSING STEERING WHEEL AUDIO CON-
TROL SWITCH
1.CHECK HARNESS BETWEEN BLUETOOTH CONTROL UNIT AND MICROPHONE
1. Turn ignition switch OFF.
2. Disconnect Bluetooth control unit connector and microphone connector.
3. Check continuity between Bluetooth control unit connector B15
(A) and microphone connector R4 (B).

Terminals
Continuity
Connector Terminal Connector Terminal
7 1
A: B15 8 B: R4 2 Yes
29 4
4. Check continuity between Bluetooth control unit harness con- WKIA5795E
nector B15 and ground.

Terminals
Continuity
Connector Terminal —
7
A: B15 8 Ground No
29
OK or NG

Revision: January 2010 AV-102 2010 Sentra


TELEPHONE
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
OK >> GO TO 2.
NG >> Repair harness or connector. A
2.CHECK MICROPHONE POWER SUPPLY
1. Connect Bluetooth control unit connector and microphone connector.
B
2. Turn ignition switch ON.
3. Check voltage between microphone connector R4 terminal 4
and ground.
C
4 - Ground : Approx. 5V
OK or NG
D
OK >> GO TO 3.
NG >> Replace Bluetooth control unit. Refer to AV-105,
"Removal and Installation".
E
WKIA5796E

3.CHECK MICROPHONE SIGNAL F


Check signal between Bluetooth control unit harness connector B15
terminals 7 and 8.
G
When giving a voice

H
7 – 8:

I
PKIB5037J
LKIA0780E

OK or NG
OK >> Replace Bluetooth control unit. Refer to AV-105, "Removal and Installation". J
NG >> Replace microphone. Refer to AV-105, "Removal and Installation".
BLUETOOTH VOICE GUIDANCE IS NOT HEARD WHEN PRESSING STEERING WHEEL AUDIO
CONTROL SWITCH (WITH MID SYSTEM) AV

1.CHECK STEERING WHEEL AUDIO CONTROL SWITCH CIRCUIT


Refer to AV-101, "Steering Wheel Audio Control Switch Does Not Operate". L
OK or NG
OK >> GO TO 2.
NG >> Replace applicable parts. M
2.CHECK BLUETOOTH VOICE SIGNAL CIRCUIT
1. Turn ignition switch OFF. N
2. Disconnect Bluetooth control unit connector and audio unit connector.
3. Check continuity between Bluetooth control unit harness con-
nector B15 (A) and audio unit harness connector M53 (B).
O
Terminals
Continuity
Connector Terminal Connector Terminal
P
9 34
A: B15 10 B: M53 35 Yes
11 32
4. Check continuity between Bluetooth control unit harness con- AWNIA1991ZZ
nector B15 (A) and ground.

Revision: January 2010 AV-103 2010 Sentra


TELEPHONE
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]

Terminals
Continuity
Connector Terminal —
9
A: B15 10 Ground No
11
OK or NG
OK >> GO TO 3.
NG >> Repair harness or connector.
3.CHECK MUTE SIGNAL
1. Connect Bluetooth control unit connector and audio unit connector.
2. Turn ignition switch ON.
3. Check voltage between Bluetooth control unit connector B15
terminal 11 and ground.

11 - Ground : Approx. 5V
OK or NG
OK >> GO TO 4.
NG >> Replace audio unit. Refer to AV-81, "Removal and
Installation".

LKIA0782E

4.CHECK BLUETOOTH VOICE SIGNAL


Check signal between Bluetooth control unit harness connector B15
terminals 9 and 10.

When giving a voice

9 – 10:

SKIB3609E
WKIA5798E

OK or NG
OK >> Replace audio unit. Refer to AV-81, "Removal and Installation".
NG >> Replace Bluetooth control unit. Refer to AV-105, "Removal and Installation".
BLUETOOTH VOICE GUIDANCE IS NOT HEARD WHEN PRESSING STEERING WHEEL AUDIO
CONTROL SWITCH (WITH PREMIUM SYSTEM)
1.CHECK STEERING WHEEL AUDIO CONTROL SWITCH CIRCUIT
Refer to AV-101, "Steering Wheel Audio Control Switch Does Not Operate".
OK or NG
OK >> GO TO 2.
NG >> Replace applicable parts.
2.CHECK BLUETOOTH VOICE SIGNAL CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect Bluetooth control unit connector and AV control unit connector.

Revision: January 2010 AV-104 2010 Sentra


TELEPHONE
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
3. Check continuity between Bluetooth control unit harness con-
nector B15 (A) and AV control unit harness connector M93 (B). A

Terminals
Continuity
Connector Terminal Connector Terminal B
9 25
A: B15 10 B: M93 24 Yes
C
11 41
4. Check continuity between Bluetooth control unit harness con- AWNIA1992ZZ
nector B15 (A) and ground. D

Terminals
Continuity
Connector Terminal — E
9
A: B15 10 Ground No
F
11
OK or NG
OK >> GO TO 3. G
NG >> Repair harness or connector.
3.CHECK MUTE SIGNAL
H
1. Connect Bluetooth control unit connector and AV control unit connector.
2. Turn ignition switch ON.
3. Check voltage between Bluetooth control unit connector B15
terminal 11 and ground. I

11 - Ground : Approx. 5V
OK or NG J
OK >> GO TO 4.
NG >> Replace AV control unit. Refer to AV-81, "Removal and
Installation". AV

LKIA0782E
L
4.CHECK BLUETOOTH VOICE SIGNAL
Check signal between Bluetooth control unit harness connector B15
terminals 9 and 10. M

When giving a voice


N

9 – 10:
O

SKIB3609E
WKIA5798E

OK or NG P
OK >> Replace AV control unit. Refer to AV-81, "Removal and Installation".
NG >> Replace Bluetooth control unit. Refer to AV-105, "Removal and Installation".
Removal and Installation INFOID:0000000005283611

COMPONENTS

Revision: January 2010 AV-105 2010 Sentra


TELEPHONE
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
Bluetooth Control Unit and Antenna

ALNIA0977ZZ

1. Bluetooth control unit bracket 2. Bluetooth control unit 3. Bluetooth antenna


Front

BLUETOOTH CONTROL UNIT


Removal
NOTE:
Bluetooth control unit shown with the LH seat removed for clarity.
1. Disconnect the battery negative terminal.
2. Slide the LH front seat toward the front to remove the bluetooth
control unit bracket rear bolt (A).
3. Slide the LH front seat toward the rear to remove the bluetooth
control unit bracket front bolts (A).
4. Detach the Bluetooth control unit harness clip (B) from the Blue-
tooth control unit bracket.
5. Disconnect the Bluetooth control unit connector (C).
6. Remove the Bluetooth control unit and bracket assembly (1).
7. Remove the Bluetooth control unit screws and remove the Blue-
tooth control unit. ALNIA0978ZZ

Installation
Installation is in the reverse order of removal.
BLUETOOTH ANTENNA
Removal
NOTE:
Bluetooth antenna is mounted on top of the Bluetooth control unit.
1. Disconnect the battery negative terminal.

Revision: January 2010 AV-106 2010 Sentra


TELEPHONE
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
2. Slide the LH front seat toward the rear.
3. Disconnect the Bluetooth antenna connector. A
4. Remove the Bluetooth antenna screws and remove the Bluetooth antenna.
Installation
B
Installation is in the reverse order of removal.
BLUETOOTH MICROPHONE
Removal C
1. Disconnect the battery negative terminal.
2. Remove the map lamp. Refer to LT-81, "Map Lamp".
D
3. Remove the Bluetooth microphone.
Installation
Installation is in the reverse order of removal. E

AV

Revision: January 2010 AV-107 2010 Sentra


REAR VIEW CAMERA
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
REAR VIEW CAMERA
Component Parts and Harness Connector Location INFOID:0000000005548828

AWNIA2013ZZ

Front tweeter LH M46 (mid and pre- Audio unit M43, M45, M53, M90 Front tweeter RH M47 (mid and pre-
1. 2. 3.
mium system) (base and mid system) mium system)

Revision: January 2010 AV-108 2010 Sentra


REAR VIEW CAMERA
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
AV control unit M92, M93, M94, M95, Steering wheel audio control switch-
4. 5. 6. Rear view camera T21
M97 (premium system) es (if equipped) A
Back-up lamp switch F47 (manual
7. 8. Transmission range switch (CVT)
transmission)
B
System Description INFOID:0000000005548829

REAR VIEW CAMERA SYSTEM


C
When the shift selector is in the R position, the AV control unit shows a view to the rear of the vehicle. Lines
which indicate the vehicle clearance and distances are also displayed.

Rear View Camera System Diagram D

AWNIA2012GB
G

Part name Description


• Sends camera ON signal to the rear view camera H
AV control unit
• Receives camera image signal from the rear view camera
• Receives camera ON signal from the AV control unit
Rear view camera
• Sends image signal to the AV control unit I

AV

Revision: January 2010 AV-109 2010 Sentra


REAR VIEW CAMERA
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
Wiring Diagram - R/VIEW - INFOID:0000000005533858

AANWA0221GB

Rear View Camera Power Supply and Ground Circuit Inspection INFOID:0000000005548830

1.CHECK POWER SUPPLY CIRCUIT (REAR VIEW CAMERA SIDE)

Revision: January 2010 AV-110 2010 Sentra


REAR VIEW CAMERA
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
1. Turn ignition switch ON.
2. Shift transmission into Reverse. A
3. Check voltage between rear view camera harness connector
T21 and ground.
B
(+) Transmission
(-) Value (Approx.)
Connector Terminal position

T21 4 Ground Reverse 6V C


Is voltage reading approximately 6 volts?
YES >> GO TO 4. AWNIA2020ZZ

NO >> GO TO 2. D
2.CHECK POWER SUPPLY CIRCUIT (CONTINUITY)
1. Turn ignition switch OFF. E
2. Disconnect rear view camera and AV control unit connectors.
3. Check continuity between rear view camera harness connector
T21 (A) terminal 4 and AV control unit harness connector M93
(B) terminal 34. F

A B
Continuity G
Connector Terminal Connector Terminal
T21 4 M93 34 Yes
4. Check continuity between rear view camera harness connector AWNIA2010ZZ
H
T21 (A) terminal 4 and ground.

A I
— Continuity
Connector Terminal
T21 4 Ground No
J
Are continuity test results as specified?
YES >> GO TO 3.
NO >> Repair harness or connector.
AV
3.CHECK POWER SUPPLY CIRCUIT (AV CONTROL UNIT SIDE)
1. Connect AV control unit harness connector.
2. Turn ignition switch ON. L
3. Check voltage between AV control unit harness connector M93
and ground.
M
(+) Transmission
(-) Value (Approx.)
Connector Terminal position

M93 34 Ground Reverse 6V N


Is voltage reading approximately 6 volts?
YES >> Inspection End. AWNIA2011ZZ

NO >> Replace AV control unit. Refer to AV-81, "Removal and O


Installation".
4.CHECK GROUND CIRCUIT
P

Revision: January 2010 AV-111 2010 Sentra


REAR VIEW CAMERA
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
1. Turn ignition switch OFF.
2. Disconnect rear view camera harness connector.
3. Check continuity between rear view camera harness connector
T21 terminal 3 and ground.

Connector Terminal — Continuity


T21 3 Ground Yes
Does continuity exist?
YES >> Inspection End.
NO >> Repair harness or connector. AWNIA2021ZZ

Removal and Installation INFOID:0000000005485391

ALNIA1211ZZ

1. Licence lamp finisher 2. Trunk opener request switch (if equipped) 3. Rear view camera
A. License lamp finisher nut B. Rear view camera connector

REMOVAL
1. Remove trunk lid finisher. Refer to EI-44, "Removal and Installation".
2. Disconnect the rear view camera connector.
3. Remove the license plate finisher. Refer to EI-25, "Removal and Installation".
4. Press in the rear view camera tab (A) then release the rear view
camera hook (B) and remove the rear view camera.

ALNIA1212ZZ

INSTALLATION
Installation is in the reverse order of removal.

Revision: January 2010 AV-112 2010 Sentra


IPOD® CONNECTOR
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
IPOD® CONNECTOR
A
Removal and Installation INFOID:0000000006054109

REMOVAL B
1. Remove the center console assembly. Refer to IP-12, "Removal and Installation".
2. Push the pawl from the back of the center console to remove the
iPod® connector and aux jack (1). C

ALNIA1209ZZ
F
INSTALLATION
Installation is in the reverse order of removal.
G

AV

Revision: January 2010 AV-113 2010 Sentra


IPOD® ADAPTER
< SERVICE INFORMATION > [AUDIO WITHOUT NAVIGATION]
IPOD® ADAPTER
Removal and Installation INFOID:0000000006054119

REMOVAL
1. Disconnect the battery negative terminal.
2. Remove the cluster lid C. Refer to IP-11, "Component Parts".
3. Remove the cluster lid C bracket screws.
4. Remove the iPod® adapter.
INSTALLATION
Installation is in the reverse order of removal.

Revision: January 2010 AV-114 2010 Sentra


PRECAUTIONS
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]

SERVICE INFORMATION A
PRECAUTIONS
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT B
PRE-TENSIONER" INFOID:0000000005905412

The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along C
with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain
types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS
system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front
air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted. D
Information necessary to service the system safely is included in the SRS and SB section of this Service Man-
ual.
WARNING: E
• To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in
the event of a collision which would result in air bag inflation, all maintenance must be performed by
an authorized NISSAN/INFINITI dealer.
F
• Improper maintenance, including incorrect removal and installation of the SRS can lead to personal
injury caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag
Module, see the SRS section.
• Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this G
Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or har-
ness connectors.
PRECAUTIONS WHEN USING POWER TOOLS (AIR OR ELECTRIC) AND HAMMERS H
WARNING:
• When working near the Airbag Diagnosis Sensor Unit or other Airbag System sensors with the Igni-
tion ON or engine running, DO NOT use air or electric power tools or strike near the sensor(s) with a I
hammer. Heavy vibration could activate the sensor(s) and deploy the air bag(s), possibly causing
serious injury.
• When using air or electric power tools or hammers, always switch the Ignition OFF, disconnect the J
battery, and wait at least 3 minutes before performing any service.
Precaution Necessary for Steering Wheel Rotation After Battery Disconnect
INFOID:0000000005905413 AV
NOTE:
• This Procedure is applied only to models with Intelligent Key system and NATS (NISSAN ANTI-THEFT SYS-
TEM). L
• Remove and install all control units after disconnecting both battery cables with the ignition knob in the
″LOCK″ position.
• Always use CONSULT-III to perform self-diagnosis as a part of each function inspection after finishing work. M
If DTC is detected, perform trouble diagnosis according to self-diagnostic results.
For models equipped with the Intelligent Key system and NATS, an electrically controlled steering lock mech-
anism is adopted on the key cylinder.
For this reason, if the battery is disconnected or if the battery is discharged, the steering wheel will lock and N
steering wheel rotation will become impossible.
If steering wheel rotation is required when battery power is interrupted, follow the procedure below before
starting the repair operation. O
OPERATION PROCEDURE
1. Connect both battery cables.
NOTE: P
Supply power using jumper cables if battery is discharged.
2. Use the Intelligent Key or mechanical key to turn the ignition switch to the ″ACC″ position. At this time, the
steering lock will be released.
3. Disconnect both battery cables. The steering lock will remain released and the steering wheel can be
rotated.
4. Perform the necessary repair operation.

Revision: January 2010 AV-115 2010 Sentra


PRECAUTIONS
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]
5. When the repair work is completed, return the ignition switch to the ″LOCK″ position before connecting
the battery cables. (At this time, the steering lock mechanism will engage.)
6. Perform a self-diagnosis check of all control units using CONSULT-III.

Revision: January 2010 AV-116 2010 Sentra


PREPARATION
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]
PREPARATION
A
Commercial Service Tool INFOID:0000000005905415

B
Tool name Description
Power tool Loosening bolts and nuts
C

PBIC0191E

AV

Revision: January 2010 AV-117 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]
AUDIO
Component Parts Location INFOID:0000000005905466

AWNIA2204ZZ

Revision: January 2010 AV-118 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]

1. Front tweeter LH M46 2. AV control unit M79, M86, M87, M88, 3. Front tweeter RH M47 A
M92, M99
4. Steering wheel audio control switch- 5. Front door speaker 6. Rear speaker LH B27 (without Rock-
es LH D10 ford Fosgate system)
RH D108 Rear speaker assembly LH B40 B
(with Rockford Fosgate)
7. Rear speaker RH B39 (without Rock- 8. USB interface and AUX jack 9. Bluetooth control unit B15, B62, B69
ford Fosgate system) M228,M229 C
Rear speaker assembly RH B38
(with Rockford Fosgate)
10. Audio amplifier B43, B44 (with Rock- 11. GPS antenna (view with combination
ford Fosgate) meter removed) D

System Description INFOID:0000000005905467

AV

P
AWNIA2208GB

AUDIO SYSTEM (WITHOUT ROCKFORD FOSGATE)


Refer to Owner's Manual for audio system operating instructions.
Navigation is built into AV control unit.
This navigation has the following functions.

Revision: January 2010 AV-119 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]
• Full support for playback of music from iPod® and USB device.
• High resolution full color touch panel 5 “WQVGA” display.
• FM/AM twin digital tuner.
• USB mass storage.
• RDS-TCM.
• POI Support is included. User POI download.
Power is supplied at all times
• through 20A fuse (No. 31, located in the fuse and fusible link box)
• to AV control unit terminal 19.
With the ignition switch in the ACC or ON position, power is supplied
• through 10A fuse [No. 6, located in the fuse block (J/B)]
• to AV control unit terminal 7.
Ground is supplied to
• to AV control unit terminals 20 and 31
• through grounds M57 and M61.
Then audio signals are supplied
• through AV control unit terminals 2, 3, 4, 5, 11, 12, 13 and 14
• to terminals + and - of front door speaker LH and RH
• to terminals + and - of front tweeter LH and RH and
• to terminals + and - of rear speaker LH and RH.
AUDIO SYSTEM (WITH ROCKFORD FOSGATE)
Refer to Owner's Manual for audio system operating instructions.
Navigation is built into AV control unit.
This navigation has the following functions.
• Full support for playback of music from iPod® and USB device.
• High resolution full color touch panel 5 “WQVGA” display.
• FM/AM twin digital tuner.
• USB mass storage.
• RDS-TCM.
• POI Support is included. User POI download.
Power is supplied at all times
• through 20A fuse [No. 17, located in the fuse block (J/B)]
• to audio amplifier terminal 17,
• through 20A fuse (No. 31, located in the fuse and fusible link box)
• to audio amplifier terminal 1 and
• to AV control unit terminal 19.
With the ignition switch in the ACC or ON position, power is supplied
• through 10A fuse [No. 6, located in the fuse block (J/B)]
• to AV control unit terminal 7.
Ground is supplied to
• to AV control unit terminals 20, 31 and 32
• through grounds M57 and M61.
Ground is also supplied
• to audio amplifier terminals 4 and 20
• through grounds B7 and B19.
Then audio signals are supplied
• through AV control unit terminals 2, 3, 4, 5, 11, 12, 13 and 14
• to audio amplifier terminals 5, 6, 7, 8, 21, 22, 23 and 24.
Audio signals are amplified by the audio amplifier.
The amplified audio signals are supplied
• through audio amplifier terminals 2, 3, 11, 12, 13, 14, 15, 16, 18, 19, 27, 28, 29, 30, 31 and 32
• to terminals + and - of front door speaker LH and RH and
• to terminals + and - of front tweeter LH and RH
• to terminals 1, 2, 3 and 4 of rear speaker assembly LH and RH.
STEERING WHEEL AUDIO CONTROL SWITCHES
When one of steering wheel audio control switches is pushed, the resistance in steering switch circuit changes
depending on which button is pushed.
SPEED SENSITIVE VOLUME SYSTEM

Revision: January 2010 AV-120 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]
Volume level of this system goes up and down automatically in proportion to the vehicle speed. The control
level can be selected by the customer. Refer to Owner's Manual for operating instructions. A
Schematic INFOID:0000000005905470

B
WITHOUT ROCKFORD FOSGATE

AV

AANWA0281GB

Revision: January 2010 AV-121 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]
WITH ROCKFORD FOSGATE

AANWA0288GB

Revision: January 2010 AV-122 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]
Wiring Diagram - AUDIO - INFOID:0000000005905471

A
WITHOUT ROCKFORD FOSGATE

AV

P
AANWA0282GB

Revision: January 2010 AV-123 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]

AANWA0283GB

Revision: January 2010 AV-124 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]

AV

AANWA0284GB

Revision: January 2010 AV-125 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]

AANWA0286GB

Revision: January 2010 AV-126 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]

AV

AANWA0287GB

Revision: January 2010 AV-127 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]
WITH ROCKFORD FOSGATE

AANWA0289GB

Revision: January 2010 AV-128 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]

AV

AANWA0290GB

Revision: January 2010 AV-129 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]

AANWA0291GB

Revision: January 2010 AV-130 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]

AV

AANWA0292GB

Revision: January 2010 AV-131 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]

AANWA0293GB

Revision: January 2010 AV-132 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]

AV

AANWA0298GB

Revision: January 2010 AV-133 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]

AANWA0294GB

Revision: January 2010 AV-134 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]

AV

AANWA0285GB

Revision: January 2010 AV-135 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]
AV Control Unit (Without Rockford Fosgate) Harness Connector Terminal Layout
INFOID:0000000005905472

AWNIA2200ZZ

Terminal and Reference Value for AV Control Unit (Without Rockford Fosgate)
INFOID:0000000005905473

Terminal
Signal Condition
(Wire color) Reference value Example of symp-
Item input/
Ignition (Approx.) tom
+ – output Operation
switch

Audio sound No sound from


Receive audio
2 (L) 3 (W) signal front Output ON front door speaker
signal
LH LH or tweeter LH.

SKIA0177E

Audio sound
Receive audio No sound from
4 (G) 5 (V) signal rear Output ON
signal rear speaker LH.
LH

SKIA0177E

Press Phone/
0V
End switch
Press SEEK UP
1.7V Steering wheel au-
Remote switch
6 (P) Ground Input ON dio controls do not
control A Press VOL UP
3.3V function
switch
Except for
5.0V
above
Ignition switch System does not
7 (GR) Ground ACC signal Input ON Battery voltage
ACC or ON work properly.

Audio sound No sound from


Receive audio
11 (P) 12 (R) signal front Output ON front door speaker
signal
RH RH or tweeter RH.

SKIA0177E

Revision: January 2010 AV-136 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]
Terminal
Signal Condition
(Wire color) Reference value Example of symp- A
Item input/
Ignition (Approx.) tom
+ – output Operation
switch
B

Audio sound
Receive audio No sound from C
13 (L) 14 (Y) signal rear Output ON
signal rear speaker RH.
RH

SKIA0177E D
Remote Steering wheel au-
15 (LG) — control Input — — — dio controls do not
ground function E
Press Phone/
0V
Send switch
Press SEEK F
1.7V Steering wheel au-
Remote DOWN switch
16 (L) Ground Input ON dio controls do not
control B Press VOL
3.3V function
DOWN switch G
Except for
5.0V
above
H

When vehicle
Vehicle
speed is approx.
18 (O) Ground speed signal Input ON
40 km/h (25
Ground I
(8-pulse)
MPH)

SKIA6649J J
Battery pow- System does not
19 (Y) Ground Input — — Battery voltage
er work properly.
20 (B) Ground Ground — ON — — — AV
Reverse sig- Battery voltage Ground
28 (G) Ground Input ON R position
nal Other than R position 0V
L
31 (B) Ground Ground — ON — — —
Rear view
camera
33 (B) Ground
ground sig-
— — — — Ground M
nal
Rear view
Shift selector is N
34 (R) Ground camera ON Output ON 6V Ground
in R position
signal

O
Rear view
With rear view
35 (P) Ground camera vid- Input ON Ground
camera ON
eo in (-) P

SKIB2251J

Revision: January 2010 AV-137 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]
Terminal
Signal Condition
(Wire color) Reference value Example of symp-
Item input/
Ignition (Approx.) tom
+ – output Operation
switch

Rear view
With rear view
36 (L) Ground camera vid- Input ON Ground
camera ON
eo in (+)

SKIB2251J

37 (GR) — Shield — — — — —
AV commu-
Input/
38 (P) — nication sig- — — — —
Output
nal 1 (L)
AV commu-
Input/
39 (L) — nication sig- — — — —
Output
nal 1 (H)
40 (GR) — Shield — — — — —
Start confirma-
tion/adjustment
mode, and then
Voice Micro-
TEL voice phone Test by TEL voice audio
43 (BR) 42 (Y) Input ON
audio signal selecting “Voice signal
Microphone
Test” on Hands-
free Microphone SKIB3609E
screen.
45 (B) — USB ground — — — — —
AUX sound
46 (L) — — — — — —
signal LH
47 (W) — USB D- — — — — —
AUX sound
48 (GR) — — — — — —
signal RH
49 (G) — USB D+ — — — — —
AUX sound
50 (BR) — signal — — — — —
ground
USB V BUS
51 (R) — — — — — —
signal
53 (GR) — SHIELD — — — — —
Satellite an-
54 — — — — — —
tenna signal
GPS anten-
55 — — — — — —
na signal
56 — SHIELD — — — — —
Antenna ON
57 — — — — — —
signal
Main anten-
58 — — — — — —
na signal

Revision: January 2010 AV-138 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]
AV Control Unit (With Rockford Fosgate) Harness Connector Terminal Layout
INFOID:0000000005905474 A

AWNIA2200ZZ D

Terminal and Reference Value for AV Control Unit (With Rockford Fosgate) INFOID:0000000005905475

Terminal
Signal Condition
(Wire color) Reference value Example of symp-
Item input/ F
Ignition (Approx.) tom
+ – output Operation
switch
Audio amplifier G
Amp. ON/
1 (G) Ground Output ON — More than 6.5V does not work
OFF signal
properly.

Audio sound No sound from


Receive audio
2 (W) 3 (B) signal front Output ON front door speaker
signal I
LH LH or tweeter LH.

SKIA0177E
J

Audio sound AV
Receive audio No sound from
4 (LG) 5 (V) signal rear Output ON
signal rear speaker LH.
LH

L
SKIA0177E

Press Phone/
0V
End switch
M
Press SEEK UP
1.7V Steering wheel au-
Remote switch
6 (P) Ground Input ON dio controls do not
control A Press VOL UP
3.3V function N
switch
Except for
5.0V
above
O
Ignition switch System does not
7 (GR) Ground ACC signal Input ON Battery voltage
ACC or ON work properly.
Shield
10 (GR) — — — — — — P
ground

Revision: January 2010 AV-139 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]
Terminal
Signal Condition
(Wire color) Reference value Example of symp-
Item input/
Ignition (Approx.) tom
+ – output Operation
switch

Audio sound No sound from


Receive audio
11 (R) 12 (L) signal front Output ON front door speaker
signal
RH RH or tweeter RH.

SKIA0177E

Audio sound
Receive audio No sound from
13 (BR) 14 (Y) signal rear Output ON
signal rear speaker RH.
RH

SKIA0177E

Remote Steering wheel au-


15 (LG) — control Input — — — dio controls do not
ground function
Press Phone/
0V
Send switch
Press SEEK
1.7V Steering wheel au-
Remote DOWN switch
16 (L) Ground Input ON dio controls do not
control B Press VOL
3.3V function
DOWN switch
Except for
5.0V
above

When vehicle
Vehicle
speed is approx.
18 (O) Ground speed signal Input ON Ground
40 km/h (25
(8-pulse)
MPH)

SKIA6649J

Battery pow- System does not


19 (Y) Ground Input — — Battery voltage
er work properly.
20 (B) Ground Ground — ON — — —

Reverse sig- Battery voltage Ground


28 (G) Ground Input ON R position
nal Other than R position 0V
31 (B) Ground Ground — ON — — —
32 (B) Ground Ground — ON — — —
Rear view
camera
33 (B) Ground — — — — Ground
ground sig-
nal
Rear view
Shift selector is
34 (R) Ground camera ON Output ON 6V Ground
in R position
signal

Revision: January 2010 AV-140 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]
Terminal
Signal Condition
(Wire color) Reference value Example of symp- A
Item input/
Ignition (Approx.) tom
+ – output Operation
switch
B

Rear view
With rear view C
35 (P) Ground camera vid- Input ON Ground
camera ON
eo in (-)

SKIB2251J D

E
Rear view
With rear view
36 (L) Ground camera vid- Input ON Ground
camera ON
eo in (+)
F
SKIB2251J

37 (GR) — Shield — — — — —
G
AV commu-
Input/
38 (P) — nication sig- — — — —
Output
nal 1 (L)
H
AV commu-
Input/
39 (L) — nication sig- — — — —
Output
nal 1 (H)
40 (GR) — Shield — — — — — I
Start confirma-
tion/adjustment
mode, and then J
Voice Micro-
TEL voice phone Test by TEL voice audio
43 (BR) 42 (Y) Input ON
audio signal selecting “Voice signal
Microphone AV
Test” on Hands-
free Microphone SKIB3609E
screen.
L
45 (B) — USB ground — — — — —
AUX sound
46 (L) — — — — — —
signal LH
M
47 (W) — USB D- — — — — —
AUX sound
48 (GR) — — — — — —
signal RH N
49 (G) — USB D+ — — — — —
AUX sound
50 (BR) — signal — — — — — O
ground
USB V BUS
51 (R) — — — — — —
signal
P
53 (GR) — SHIELD — — — — —
Satellite an-
54 — — — — — —
tenna signal
GPS anten-
55 — — — — — —
na signal
56 — SHIELD — — — — —

Revision: January 2010 AV-141 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]
Terminal
Signal Condition
(Wire color) Reference value Example of symp-
Item input/
Ignition (Approx.) tom
+ – output Operation
switch
Antenna ON
57 — — — — — —
signal
Main anten-
58 — — — — — —
na signal

Audio Amplifier Harness Connector Terminal Layout (With Rockford Fosgate)


INFOID:0000000005905476

WKIA5763E

Terminal and Reference Value for Audio Amplifier (With Rockford Fosgate) INFOID:0000000005905477

Terminal
Signal Condition
(wire color) Reference value Example of
Item input/
Ignition (Approx.) symptom
+ – output Operation
switch
System does not
1 (R) Ground Battery Input — — Battery voltage
work properly.

Receive audio No sound from


2 (W) 18 (B) Subwoofer LH Output ON
signal subwoofer LH.

SKIA0177E

Receive audio No sound from


3 (Y) 19 (L) Subwoofer RH Output ON
signal subwoofer RH.

SKIA0177E

4 (B) Ground Ground — ON — — —


Amp. ON sig- System does not
9 (G/R) Ground Input ON — More than 6.5V
nal work properly.

Revision: January 2010 AV-142 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]
Terminal
Signal Condition
(wire color) Reference value Example of A
Item input/
Ignition (Approx.) symptom
+ – output Operation
switch
B

Rear speaker Receive audio No sound from rear C


11 (V) 27 (B/Y) Output ON
LH signal speaker LH.

SKIA0177E D

E
Rear speaker Receive audio No sound from rear
12 (R/Y) 28 (R/L) Output ON
RH signal speaker RH.

F
SKIA0177E

Front tweeter Receive audio No sound from


13 (W/R) 29 (L/B) Output ON
RH signal front tweeter RH. H

SKIA0177E
I

Front tweeter Receive audio No sound from J


14 (R/G) 30 (B/R) Output ON
LH signal front tweeter LH.

AV
SKIA0177E

L
No sound from
Front door Receive audio
15 (L/W) 31 (L/R) Output ON front door speaker
speaker LH signal
LH.
M

SKIA0177E

No sound from
Front door Receive audio
16 (W/B) 32 (G/W) Output ON front door speaker O
speaker RH signal
RH.

SKIA0177E P
System does not
17 (G) Ground Battery Input — — Battery voltage
work properly.
20 (B) Ground Ground — ON — — —

Revision: January 2010 AV-143 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]
Terminal
Signal Condition
(wire color) Reference value Example of
Item input/
Ignition (Approx.) symptom
+ – output Operation
switch

No sound from
Audio sound Receive audio front door speaker
21 (R) 5 (W) Input ON
signal front RH signal RH or front tweeter
RH.

SKIA0177E

No sound from
Audio sound Receive audio front door speaker
22 (W) 6 (B) Input ON
signal front LH signal LH or front tweeter
LH.

SKIA0177E

No sound from rear


Audio sound Receive audio
23 (L) 7 (B/W) Input ON speaker assembly
signal rear RH signal
RH.

SKIA0177E

No sound from rear


Audio sound Receive audio
24 (L/R) 8 (L/G) Input ON speaker assembly
signal rear LH signal
LH.

SKIA0177E

On-Board Diagnosis INFOID:0000000006035565

METHOD OF STARTING
1. Start the engine.
2. Turn OFF audio.
3. While pressing the “SET UP” switch, turn the MENU dial coun-
terclockwise 3 clicks or more first, then clockwise and counter-
clockwise 3 clicks or more, respectively. (After the diagnosis
mode starts, the initial screen of the diagnosis mode appears.)

JSNIA2456ZZ

• On-board diagnosis can be performed in the service test mode.


• On-board diagnosis checks that the system can be operated normally.

Revision: January 2010 AV-144 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]
Service test mode
Mode Item Content A
The version data of the parts is shown
Service version —
displayed.
FM monitor — The Change Mediator monitors the dy- B
namic values of the current tuner. If the
band is switched within the radio mon-
AM monitor — itor context, the active monitor is
Radio switched as well. C
XM monitor — The version data is displayed.
• Clear XM Chipset NVM
• Reset all XM settings The current system status is dis- D
XM functions
• XM CBM debug mode ON/OFF played.
• External Diag mode ON/OFF
The function allows connection of the E
User Configuration Touch Display Calibration — position detection accuracy of the
touch panel.

AV

Revision: January 2010 AV-145 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]
Mode Item Content
• SD card slot Access
• Power Supply
• Speed Signal
• Direction Signal
• Illumination Signal
• GPS Antenna The current system status is dis-
Running system status • EXT. Phone Sig played.
• Microphone Current
• Radio Antenna
• USB Device
• iPod® firmware version
• Steering wheel L32H

• Bluetooth® Module - Sub-Unit


Connection Malfunction
• SD-card Slot - Sub-Unit Connec-
tion Malfunction
• Programming Error
• Radio-Antenna Circuit Malfunc-
tion
• FM-Antenna 1 Connection Mal-
function
• Satellite Antenna Connection
Failure
• GPS Antenna Circuit Malfunc-
tion The history of the system status is re-
System history • CD-Drive Mechanical Malfunc- ported in the report memory, dis-
tion played.
System status • CD Read Malfunction
• Power Supply voltage: Lower
Limit Exceeded
• Power Supply voltage: Upper
Limit Exceeded
• Reduced system Functionality
due to over temperature
• Display switched OFF due to
over temperature
• SD card removed without being
de-mounted
• Code plug missing
Speaker test 100Hz This activates a sequence of test tone
outputs to the four speaker lines one
— after the other for 1 second.
Speaker test 4KHz The frequency can be chosen by user
selection (100Hz and 4KHz).
This provides a test sequence where
test displays (plain colored display:
e.g. white, black, red, blue, green) are
shown one after the other.
The respective color is shown for an
Display test — indicated period of time (parameter).
After the display test, the design of the
display previously available is stored.
While the screen shows a plain col-
ored display, a pixel malfunction may
be detected.

Revision: January 2010 AV-146 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]
Mode Item Content
A
• 8 pulses speed
• Clock ON/OFF
• Camera guidelines L32H
• Equalizer setup L32H The device is configured by a connect- B
System configuration • RF tuning ed hardware circuit. The parameter is
• Antenna type influenced.
• Sound system
• Sub Out: Code C
• Steering wheel

• Bluetooth® module Access Mal-


function D
• SD-card Access Malfunction A system self test is executed: the re-
• Radio-Antenna Circuit Malfunc- sult is stored into the error memory
Self test
tion which is shown afterwards as a list of
• GPS Antenna Circuit Malfunc- codes of the detected malfunctions. E
tion
• Microphone Circuit Malfunction

END ON-BOARD DIAGNOSIS F


Turn OFF ignition switch.
Symptom Chart INFOID:0000000005905480
G

MALFUNCTION WITH NAVIGATION


H
Probable malfunction location / Action to
Symptoms Check items
take
AV control unit power supply and ground
All switches cannot be operated. I
Display does not turn ON. circuit. Refer to AV-149.
All switches can be operated. AV control unit. Refer to AV-149.
AV control unit power supply and ground
Display does not turn ON. J
All switches cannot be operated. circuit. Refer to AV-149.
Display turn ON. AV control unit. Refer to AV-149.
Only specified switch cannot be AV
– AV control unit. Refer to AV-149.
operated.
Voice guidance is not heard. Audio sound is normal. AV control unit. Refer to AV-149.
“Illumination Signal” reaches L
Check “Illumination 100% when the lighting AV control unit. Refer to AV-149.
Signal” in “SERVICE switch is ON.
Display does not dim.
SYSTEM STATUS”, “Illumination Signal” does not
“SERVICE MENU”. M
reach 100% when the lighting Illumination signal circuit
switch is ON.
A value of “Speed Signal”
Check “Speed Signal” changes according to vehicle AV control unit. Refer to AV-149. N
in “SERVICE SYSTEM speeds.
Vehicle icon does not move.
STATUS”, “SERVICE A value of “Speed Signal”
MENU”. does not change according to Vehicle speed signal circuit O
vehicle speeds.

Check “GPS Antenna” “Connected” is displayed for


AV control unit. Refer to AV-149.
Map matching is not complete in “SERVICE SYSTEM “GPS Antenna”.
P
GPS icon is not displayed SELF TEST”, “SER- “Connected” is not displayed
VICE MENU”. GPS antenna. Refer to AV-186.
for “GPS Antenna”.
Radio broadcasts are received. AV control unit. Refer to AV-149.
Traffic information (XM Traffic) is
not received. • Radio antenna. Refer to AV-186.
Radio broadcasts are not received.
• Antenna feeder. Refer to AV-186.

MALFUNCTION WITH AUDIO

Revision: January 2010 AV-147 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]
• The majority of the audio malfunctions are the result of outside causes (Malfunction CD, electromagnetic
interference, etc.). Check the symptoms below to diagnose the malfunction.
• The vehicle itself can be a source of noise if noise prevention parts or electrical equipment is malfunctioning.
Check if noise is caused and/or changed by engine speed, ignition switch turned to each position, and oper-
ation of each piece of electrical equipment, and then determine the cause.
NOTE:
• CD-R is not guaranteed to play because they can contain compressed audio (MP3, WMA) or could be
incorrectly mastered by the customer on a computer.
• Check if the CDs have the Compact Disc logo. If not, the disc is not mastered to the “red book” Compact
Disc standard and may not play.

Symptom Probable malfunction location


• AV control unit power supply and ground circuit. Refer to AV-149.
Audio system does not work normally.
• AV control unit. Refer to AV-149.
• Remote control signal circuit between steering switch and combination
switch (spiral cable)
• Remote control signal circuit between combination switch (spiral cable)
Audio steering wheel switch does not operate properly. and AV control unit
• Steering wheel audio control switch
• Combination switch (spiral cable)
• AV control unit. Refer to AV-149.
• Speaker circuit shorted to ground. Refer to AV-123
No sound can be heard from any speakers.
• AV control unit. Refer to AV-149.
• Audio signal circuit between AV control unit and speaker
• Speaker
No sound can be heard from one or several speakers.
• Tweeter
• AV control unit. Refer to AV-149.
• Antenna feeder
No sound can be heard from radio or noise is herd. • Roof antenna
• AV control unit. Refer to AV-149.
• Vehicle speed signal circuit between combination meter and AV control
unit
Speed dependent volume system does not function.
• AV control unit. Refer to AV-149.
• Combination meter

• iPod® sound signal circuit between AV control unit and Auxiliary jack as-
There is no sound from the iPod® or Aux jack. sembly
• AV control unit. Refer to AV-149.
NOTE:
Noise resulting from variations in field strength, such as fading noise and multi-path noise, or external noise
from trains and other sources, is not a malfunction.
• Fading noise: This noise occurs because of variations in the field strength in a narrow range due to moun-
tains or buildings blocking the signal.
• Multi-path noise: This noise results from a time difference between the broadcast waves directly from the
station arriving at the antenna and the waves reflected by mountains or buildings.
MALFUNCTION WITH USB
NOTE:
Check that there is no malfunction of USB equipment main body before performing a diagnosis.

Probable malfunction location / Action to


Symptoms Check items
take

With iPod® or USB • USB interface and AUX jack harness


iPod® or USB memory name • USB interface and AUX jack
memory Connected, is displayed for “USB Device”.
check “USB Device” in • AV control unit. Refer to AV-149.
iPod® or USB memory can not be
recognized. “SERVICE STATUS”, “Removed” is displayed for • USB interface and AUX jack harness
“SERVICE MENU”. “USB Device”. • USB interface and AUX jack
— — Generation of iPod® not supported

MALFUNCTION WITH AUXILIARY INPUT

Revision: January 2010 AV-148 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]
NOTE:
Check that there is no malfunction of AUX equipment main body before performing a diagnosis. A

Symptoms Check items Probable malfunction location


No voice sound is heard when Voice sound is heard when other modes • USB interface and AUX jack harness B
AUX mode is selected. are selected. • USB interface and AUX jack

MALFUNCTION WITH STEERING SWITCH


C
Symptoms Possible malfunction location / Action to take
All steering switches are not operated.
D
Only specified switch cannot be operated.
“SEEK UP”, “VOL UP” and “SOURCE” switches are not Steering switch. Refer to AV-150.
operated.
E
“SOURCE”, “SEEK DOWN” and “VOL DOWN” switches
are not operated.

AV Control Unit Power and Ground Supply Circuit Inspection INFOID:0000000005906752 F

1.CHECK FUSE
Check that the following fuses of the AV control unit are not blown. G

Unit Terminals Signal name Fuse No.


H
19 Battery power 31
AV control unit
7 Ignition switch ACC or ON 6
OK or NG I
OK >> GO TO 2.
NG >> If fuse is blown, be sure to eliminate cause of malfunction before installing new fuse. Refer to PG-
3. J
2.AV CONTROL UNIT POWER SUPPLY CIRCUIT CHECK
1. Disconnect AV control unit connector.
2. Check voltage between the AV control unit connector and ground. AV

Terminal No.
Unit (+) OFF ACC ON L
(-)
Connector Terminal
Battery Battery Battery
19 Ground
voltage voltage voltage
M
AV control
M92
unit Battery Battery
7 Ground 0V
voltage voltage
N
OK or NG
OK >> GO TO 3. WKIA5769E

NG >> • Check connector housings for disconnected or loose


terminals. O
• Repair harness or connector.
3.GROUND CIRCUIT CHECK P

Revision: January 2010 AV-149 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]
Check continuity between AV control unit harness connectors M92
(A), M99 (B) terminals 20, 31, 32 (with rockford fosgate) and ground.

Continuity should exist.


OK or NG
OK >> Inspection End.
NG >> • Check connector housings for disconnected or loose
terminals.
• Repair harness or connector.
AWNIA2201ZZ

Audio Amplifier Power and Ground Supply Circuit Inspection INFOID:0000000005906753

1.CHECK FUSE
Check that the following fuses of the audio amplifier are not blown.

Unit Terminals Signal name Fuse No.


17 Battery power 17
Audio amplifier
1 Battery power 31
OK or NG
OK >> GO TO 2.
NG >> If fuse is blown, be sure to eliminate cause of malfunction before installing new fuse. Refer to PG-
3.
2.AUDIO AMPLIFIER POWER SUPPLY CIRCUIT CHECK
1. Disconnect audio amplifier connector.
2. Check voltage between audio amplifier connector and ground.

Terminal No.
Unit (+) OFF ACC ON
(-)
Connector Terminal

Audio am- 1 Battery Battery


B44 Ground 0V
plifier 17 voltage voltage

OK or NG
OK >> GO TO 3. WKIA3722E
NG >> • Check connector housings for disconnected or loose
terminals.
• Repair harness or connector.
3.GROUND CIRCUIT CHECK
Check continuity between audio amplifier harness connector B44
terminals 4, 20 and ground.

Continuity should exist.


OK or NG
OK >> Inspection End.
NG >> • Check connector housings for disconnected or loose
terminals.
• Repair harness or connector.
WKIA3723E

Steering Switch Check INFOID:0000000005905482

1.CHECK HARNESS
Revision: January 2010 AV-150 2010 Sentra
AUDIO
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]
1. Turn ignition switch OFF.
2. Disconnect audio unit connector M92 and spiral cable connector M30. A
3. Check continuity between audio unit connector terminal and spi-
ral cable connector terminal.
B
Terminals
A B Continuity
Connector Terminal Connector Terminal C
6 33
M92 15 M30 25 Yes
16 31
D
WKIA5807E
4. Check continuity between audio unit and ground.
E
Terminals
A Continuity
(–)
Connector Terminal F
6
M92 15 Ground No
G
16
OK or NG
OK >> GO TO 2. H
NG >> Repair harness.
2.SPIRAL CABLE CHECK
I
1. Disconnect spiral cable connector M78.
2. Check continuity between spiral cable terminals.

15 - 33 : Continuity should exist. J


17 - 31 : Continuity should exist.
19 - 25 : Continuity should exist.
AV
OK or NG
OK >> GO TO 3.
NG >> Replace spiral cable. Refer to SRS-33, "Removal and L
Installation".
WKIA5777E

3.CHECK STEERING SWITCH RESISTANCE M


Check resistance between spiral cable connector M78 terminals.

Resistance N
Terminal Signal name Condition (Ω)
(Approx.)
Seek (down) Depress Seek down switch. 165 O
17 19 Phone/Send Depress Phone/Send switch. 0
Volume (down) Depress volume down switch. 487
Seek (up) Depress Seek up switch. 165 P
15 19 Phone/End Depress Phone/End switch. 0
WKIA5778E
Volume (up) Depress volume up switch. 487
OK or NG
OK >> Inspection End.
NG >> Replace steering switch. Refer to AV-159, "Removal and Installation".

Revision: January 2010 AV-151 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]
Sound Is Not Heard from Front Door Speaker or Front Tweeter (Without Rockford Fos-
gate) INFOID:0000000005905490

1.HARNESS CHECK
1. Disconnect AV control unit connector and front door speaker and front tweeter connector (LH or RH).
2. Check continuity between AV control unit harness connector ter-
minal and front door speaker and front tweeter harness connec-
tor terminal.

Terminals
AV control unit Speaker or tweeter Continuity
Connector Terminal Connector Terminal
2 +
B: M46
3 -
11 +
B: M47
12 -
A: M92 Yes
2 +
B: D10
3 -
11 +
B: D108
12 -
3. Check continuity between AV control unit harness connector ter-
minal and ground.

Terminals WKIA5444E

AV control unit Continuity



Connector Terminal
2
3
A: M92 Ground No
11
12
OK or NG
OK >> GO TO 2.
NG >> • Check connector housings for disconnected or loose terminals.
• Repair harness or connector.
2.FRONT SPEAKER SIGNAL CHECK
1. Connect AV control unit connector, front door speaker connector and front tweeter connector.
2. Turn ignition switch to ACC.
3. Push “POWER” switch.

Revision: January 2010 AV-152 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]
4. Check the signal between AV control unit connector terminals
with CONSULT-III or oscilloscope. A

Terminals
(+) (-) Condi- Reference B
tion signal
Con- Termi- Con- Termi-
nector nal nector nal
2 3
C

Receive
M92 M92 audio
D
11 12 signal

SKIA0177E
E

OK or NG
OK >> Replace front speaker. Refer to AV-159, "Removal and F
Installation".
NG >> Replace AV control unit. Refer to AV-159, "Removal and
Installation".
G
WKIA5853E

Sound Is Not Heard from Rear Speaker (Without Rockford Fosgate) INFOID:0000000005905491

H
1.HARNESS CHECK
1. Disconnect AV control unit connector and rear speaker connector.
2. Check continuity between AV control unit harness connector ter- I
minal and rear speaker harness connector terminal.

Terminals J
AV control unit Speaker Continuity
Connector Terminal Connector Terminal
AV
4 +
B: B27
5 -
A: M92 Yes
13 + L
B: B39
14 -
3. Check continuity between AV control unit harness connector ter-
minal and ground. M

Terminals
N
AV control unit Continuity

Connector Terminal
4 O
5
A: M92 Ground No WKIA5353E
13
P
14
OK or NG
OK >> GO TO 2.
NG >> • Check connector housings for disconnected or loose terminals.
• Repair harness or connector.
2.REAR SPEAKER SIGNAL CHECK
Revision: January 2010 AV-153 2010 Sentra
AUDIO
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]
1. Connect AV control unit connector and rear speaker connector.
2. Turn ignition switch to ACC.
3. Push “POWER” switch.
4. Check the signal between AV control unit harness connector ter-
minals with CONSULT-III or oscilloscope.

Terminals
(+) (-)
Condi- Reference
Con- Con- tion signal
Termi- Termi-
nec- nec-
nal nal
tor tor
4 5

Re-
ceive
M92 M92
13 14 audio
signal

SKIA0177E

OK or NG
OK >> Replace speaker. Refer to AV-159, "Removal and Instal-
lation".
NG >> Replace AV control unit. Refer to AV-159, "Removal and
Installation".
WKIA5808E

Sound Is Not Heard from Front Door Speaker or Front Tweeter (With Rockford Fos-
gate) INFOID:0000000005905492

1.HARNESS CHECK
1. Turn ignition switch OFF.
2. Disconnect audio amplifier connector B43 and suspect speaker connector.
3. Check continuity between audio amplifier harness connector ter-
minal and suspect speaker harness connector terminal.

Terminals
Audio amplifier Speaker or tweeter Continuity
Connector Terminal Connector Terminal
15 +
D10
31 -
16 +
D108
32 -
B43 Yes
14 -
M46
30 +
13 -
M47
29 +
4. Check continuity between audio amplifier harness connector ter-
minal and ground.

WKIA3372E

Revision: January 2010 AV-154 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]

Terminals A
Audio amplifier Continuity

Connector Terminal
B
13
14
15 C
16
B43 Ground No
29
D
30
31
32 E
OK or NG
OK >> GO TO 2.
NG >> • Check connector housings for disconnected or loose terminals. F
• Repair harness or connector.
2.FRONT SPEAKER SIGNAL CHECK
G
1. Connect audio amplifier connector B43 and suspect speaker connector.
2. Turn ignition switch to ACC.
3. Push “POWER” switch.
4. Check the signal between audio amplifier harness connector ter- H
minals with CONSULT-III or oscilloscope.

Terminals I
(+) (-) Condi- Reference
tion signal
Con- Termi- Con- Termi-
nector nal nector nal J
13 29
14 30
Re- LKIA0602E
AV
15 31 ceive
B43 B43
audio
signal L
16 32
SKIA0177E

OK or NG M
OK >> Replace suspect speaker. Refer to AV-159, "Removal and Installation".
NG >> GO TO 3.
3.HARNESS CHECK N
1. Turn ignition switch OFF.
2. Disconnect AV control unit connector M92 and audio amplifier connector B43.
O

Revision: January 2010 AV-155 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]
3. Check continuity between AV control unit harness connector ter-
minals and audio amplifier harness connector terminals.

Terminals
AV control unit Audio amplifier Continuity
Connector Terminal Connector Terminal
3 6
2 22
A: M92 B: B43 Yes
12 5
11 21
4. Check continuity between AV control unit harness connector ter-
minals and ground.

Terminals
AV control unit Continuity

Connector Terminal
2
3
A: M92 Ground No AWNIA2202ZZ
11
12
OK or NG
OK >> GO TO 4.
NG >> • Check connector housings for disconnected or loose terminals.
• Repair harness or connector.
4.FRONT SPEAKER SIGNAL CHECK
1. Connect AV control unit connector and audio amplifier connector.
2. Turn ignition switch to ACC.
3. Push “POWER” switch.
4. Check the signal between AV control unit harness connector ter-
minals with CONSULT-III or oscilloscope.

Terminals
(+) (-) Condi- Reference
tion signal
Con- Termi- Con- Termi-
nector nal nector nal
2 3

Receive
M92 M92 audio
11 12 signal

SKIA0177E

OK or NG
OK >> Replace audio amplifier. Refer to AV-159, "Removal and
Installation".
NG >> Replace AV control unit. Refer to AV-159, "Removal and
Installation".
WKIA5853E

Revision: January 2010 AV-156 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]
Sound Is Not Heard from Rear Speaker Assembly (With Rockford Fosgate)
INFOID:0000000005905493 A

1.HARNESS CHECK
1. Turn ignition switch OFF. B
2. Disconnect audio amplifier connectors B43, B44 and suspect speaker connector.
3. Check continuity between audio amplifier harness connector ter-
minal and suspect speaker harness connector terminal. C

Terminals
Audio amplifier Speaker Continuity D
Connector Terminal Connector Terminal
11 4
C: B40 E
27 3
A: B43
12 4
C: B38
28 3 F
Yes
2 2
C: B40
18 1
B: B44 G
3 2
C: B38
19 1
4. Check continuity between audio amplifier harness connector ter- H
minals and ground.

Terminals I
WKIA5816E
Audio amplifier Continuity

Connector Terminal
J
11
27
A: B43
12 AV
28
Ground No
2
18 L
B: B44
3
19
M
OK or NG
OK >> GO TO 2.
NG >> • Check connector housings for disconnected or loose terminals. N
• Repair harness or connector.
2.REAR SPEAKER SIGNAL CHECK
1. Connect audio amplifier connectors B43, B44 and suspect speaker connector. O
2. Turn ignition switch to ACC.
3. Push “POWER” switch.
P

Revision: January 2010 AV-157 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]
4. Check the signal between audio amplifier harness connector ter-
minals with CONSULT-III or oscilloscope.

Terminals
(+) (-)
Condi- Reference
Con- Con- tion signal
nec- Terminal nec- Terminal
tor tor

A: 11 A: 27
B43 12 B43 28
Re-
2 18 ceive
audio
B: B:
signal
B44 3 B44 19
SKIA0177E

OK or NG
OK >> Replace suspect speaker. Refer to AV-159, "Removal
and Installation".
NG >> GO TO 3.
WKIA5817E

3.HARNESS CHECK
1. Turn ignition switch OFF.
2. Disconnect AV control unit connector M92 and audio amplifier connector B43.
3. Check continuity between AV control unit harness connector ter-
minals and audio amplifier harness connector terminals.

Terminals
AV control unit Audio amplifier Continuity
Connector Terminal Connector Terminal
5 8
4 24
A: M92 B: B43 Yes
14 7
13 23
4. Check continuity between AV control unit harness connector ter-
minal and ground.

Terminals
AV control unit Continuity

Connector Terminal
4
5
A: M92 Ground No AWNIA2203ZZ
13
14
OK or NG
OK >> GO TO 4.
NG >> • Check connector housings for disconnected or loose terminals.
• Repair harness or connector.
4.REAR SPEAKER SIGNAL CHECK
1. Connect AV control unit connector M92 and audio amplifier connector B43.

Revision: January 2010 AV-158 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]
2. Turn ignition switch to ACC.
3. Push “POWER” switch. A
4. Check the signal between audio unit harness connector termi-
nals with CONSULT-III or oscilloscope.
B
Terminals
(+) (-) Condi- Reference
tion signal C
Con- Con-
Terminal Terminal
nector nector
4 5
D
Re-
ceive
M92 M92
13 14 audio
signal E

SKIA0177E

OK or NG F
OK >> Replace audio amplifier. Refer to AV-159, "Removal and
Installation".
NG >> Replace AV control unit. Refer to AV-159, "Removal and G
Installation".
WKIA5808E
H
Removal and Installation INFOID:0000000005905494

AV CONTROL UNIT I

AV

Revision: January 2010 AV-159 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]

ALNIA1208ZZ

1. AV control unit 2. Cluster lid C A. Cluster lid C bracket screws

Removal
1. Disconnect the battery negative terminal.
2. Remove the cluster lid C. Refer to IP-11.
3. Remove the AV control unit harness.
4. Remove the cluster lid C bracket screws.
5. Remove the AV control unit.
Installation
Installation is in the reverse order of removal.
FRONT TWEETER
Removal
1. Remove the front pillar garnish. Refer to EI-34.
2. Remove the front tweeter grille.

Revision: January 2010 AV-160 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]
3. Remove the front tweeter screws (A), disconnect the front
tweeter connector and remove the front tweeter (1). A

LKIA0855E

D
Installation
Installation is in the reverse order of removal.
FRONT DOOR SPEAKER E
Removal
1. Remove the front door finisher. Refer to EI-31.
2. Remove the front door speaker screws (A), disconnect the front F
door speaker connector and remove the front door speaker (1).

I
LKIA0856E

Installation
Installation is in the reverse order of removal. J
REAR SPEAKER
Removal
AV
1. Remove the rear parcel shelf finisher. Refer to EI-38, "Removal and Installation".
2. Remove the rear speaker screws (A), disconnect the rear
speaker connector and remove the rear speaker (1).
L

LKIA0857E

Installation O
Installation is in the reverse order of removal.
AUDIO AMPLIFIER
P

Revision: January 2010 AV-161 2010 Sentra


AUDIO
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]

LKIA0865E

1. Audio amplifier 2. Audio amplifier connectors A. Bolts


⇒ Front

Removal
1. Disconnect the battery negative terminal.
2. Slide the RH front seat toward the front to remove the audio amplifier rear bolts.
3. Slide the RH front seat toward the rear to remove the audio amplifier front bolts.
4. Disconnect the audio amplifier connectors and remove the audio amplifier.
Installation
Installation is in the reverse order of removal.
STEERING WHEEL AUDIO CONTROL SWITCHES
Removal
1. Remove the driver air bag module. Refer to SRS-31, "Removal and Installation".
2. Remove the steering wheel audio control switch screws (A) and
remove the steering wheel audio control switches (1).

LKIA0860E

Installation
Installation is in the reverse order of removal.

Revision: January 2010 AV-162 2010 Sentra


NAVIGATION SYSTEM
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]
NAVIGATION SYSTEM
A
How to Proceed with Trouble Diagnosis INFOID:0000000005909233

Refer to AV-147, "Symptom Chart". B

AV

Revision: January 2010 AV-163 2010 Sentra


TELEPHONE
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]
TELEPHONE
Component Parts and Harness Connector Location INFOID:0000000005905499

AWNIA2190GB

1. Bluetooth control unit B15, B62, B69 2. Steering wheel audio control 3. Microphone R4
switches
4. Combination meter M24 5. AV control unit M99

System Description INFOID:0000000005905500

BLUETOOTH® HANDS-FREE PHONE SYSTEM


Refer to the Owner's Manual for Bluetooth telephone system operating instructions.
NOTE:
Cellular telephones must have their wireless connection set up (paired) before using the Bluetooth telephone
system.

Bluetooth telephone system allows users who have a Bluetooth cellular telephone to make a wireless connec-
tion between their cellular telephone and the Bluetooth control unit. Hands-free cellular telephone calls can be
sent and received. Some Bluetooth cellular telephones may not be recognized by the Bluetooth control unit.

Revision: January 2010 AV-164 2010 Sentra


TELEPHONE
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]
When a cellular telephone or the Bluetooth control unit is replaced, the telephone must be paired with the
Bluetooth control unit. Different cellular telephones may have different pairing procedures. Refer to the cellular A
telephone operating manual.
Bluetooth Telephone System Diagram
B

AWNIA2191GB G
Bluetooth Control Unit
When the ignition switch is turned to ACC or ON, the Bluetooth con-
trol unit will power up. During power up, the Bluetooth control unit is H
initialized and performs various self checks. Initialization may take
up to 20 seconds. If a phone is present in the vehicle and paired with
the Bluetooth control unit, Nissan Voice Recognition will then I
become active. Bluetooth telephone functions can be turned off
using the Nissan Voice Recognition system.

WKIA5781E
AV
Steering Wheel Audio Control Switches
When buttons on the steering wheel audio control switch are
pushed, the resistance in steering wheel audio control switch circuit
changes depending on which button is pushed. The Bluetooth con- L
trol module uses this signal to perform various functions while navi-
gating through the voice recognition system.
The following functions can be performed using the steering wheel M
audio control switch:
• Initiate Self Diagnosis of the Bluetooth telephone system
• Start a voice recognition session
• Answer and end telephone calls N
• Adjust the volume of calls
WKIA5783E

Volume Switch O

Revision: January 2010 AV-165 2010 Sentra


TELEPHONE
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]
Call volume can be adjusted using the AV control unit volume switch.

AWNIA2192GB

Bluetooth Microphone
The Bluetooth microphone is located in the roof console assembly.
The Bluetooth microphone sends a signal to the Bluetooth control
unit. The Bluetooth microphone can be actively tested during self-
diagnosis.

AWNIA1987GB

AV Control Unit
The AV control unit receives signals from the Bluetooth control unit
and sends audio signals to the speakers.

AWNIA2193GB

Revision: January 2010 AV-166 2010 Sentra


TELEPHONE
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]
Wiring Diagram - H/PHON - INFOID:0000000005905501

AV

P
AANWA0295GB

Revision: January 2010 AV-167 2010 Sentra


TELEPHONE
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]

AANWA0296GB

Revision: January 2010 AV-168 2010 Sentra


TELEPHONE
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]
Bluetooth Control Unit Harness Connector Terminal Layout INFOID:0000000005905502

AWNIA1988GB

D
Terminal and Reference Value for Bluetooth Control Unit INFOID:0000000005905503

E
Terminal
Signal Condition
(Wire color) Reference value
Item input/ Example of symptom
Ignition (Approx.) F
+ – output Operation
switch
Battery pow- System does not
1 (Y) Ground Input — — Battery voltage
er work properly. G
ACC/ System does not
2 (V) Ground ACC power Input — Battery voltage
ON work properly.

3 (W/L) Ground IGN power Input


ON/
— Battery voltage
System does not H
START work properly.
4 (B) — Ground — — — — —
5 (GR) — Shield — — — — — I
6 (GR) — Shield — — — — —

ACC/ When giving a Bluetooth Micro-


7 (W) 8 (R) Mic-in signal Input
ON voice phone inoperative. AV

PKIB5037J
L

Bluetooth con- M
ACC/ Audio can not be
9 (BR) 10 (Y) Audio out Output trol unit sends
ON heard.
audio signal

N
SKIB3609E

22 (B) — Cont-3 — — — — —
23 (B) — Cont-4 — — — — — O
27 (B) — Cont-6 — — — — —

P
When vehicle
Vehicle
speed is approx.
28 (G/Y) Ground speed signal Input ON —
40 km/h (25
(8–pulse)
MPH)

PKIC0643E

Revision: January 2010 AV-169 2010 Sentra


TELEPHONE
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]
Terminal
Signal Condition
(Wire color) Reference value
Item input/ Example of symptom
Ignition (Approx.)
+ – output Operation
switch
Bluetooth
Bluetooth Micro-
29 (B) Ground Microphone Output — — 5V
phone inoperative.
power
Bluetooth
33 — antenna sig- Input — — — —
nal
34 — Shield — — — — —
35 (L) — M CAN + — — — — —
36 (P) — M CAN - — — — — —
M CAN
37 (GR) — — — — — —
shield
M CAN
39 (Y/R) — — — — — —
jumper 1
40 (Y/R) — M CAN 1 — — — — —
M CAN
41 (SB) — — — — — —
jumper 2
42 (SB) — M CAN 2 — — — — —

Bluetooth Control Unit Self-Diagnosis Function INFOID:0000000005909226

The Bluetooth control unit has two diagnostic checks. The first diagnostic check is performed automatically
every ignition cycle during control unit initialization. The second diagnostic check is performed by the techni-
cian using the steering wheel audio control switches prior to trouble diagnosis.
BLUETOOTH CONTROL UNIT INITIALIZATION CHECKS
• Internal control unit failure
• Bluetooth antenna connection open or shorted
• Steering wheel audio control switches (PHONE/SEND, PHONE/END) stuck closed
• Vehicle speed pulse count
• Bluetooth Microphone connection test (with playback to operator)
• Bluetooth inquiry check
SELF-DIAGNOSIS MODE
1. Turn ignition switch to ACC or ON.
2. Wait for the Bluetooth system to complete initialization. This may take up to 20 seconds.
3. Press and hold the steering wheel audio control switch PHONE/
SEND button for at least 5 seconds. The Bluetooth system will
begin to play a verbal prompt.
NOTE:
At any time, press and hold the steering wheel audio control
switch PHONE/SEND button for at least 5 seconds to exit diag-
nostic mode.

WKIA5789E

Revision: January 2010 AV-170 2010 Sentra


TELEPHONE
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]
4. While the prompt is playing, press and hold the steering wheel
audio control switch PHONE/END button for at least 5 seconds. A
The Bluetooth system will sound a 5 second beep.
5. While the beep is sounding, press and hold the steering wheel
audio control switch PHONE/END button for at least 5 seconds
B
again.
6. The Bluetooth system has now entered into the diagnostic
mode. Results of the diagnostic checks will be verbalized to the
technician. Refer to AV-171, "Malfunction Code/Symptom C
Chart".
7. If there are no failure records to report, the speed pulse count
AWKIA1579ZZ
will be reported next. D
8. After the speed pulse count is reported, an interactive Bluetooth microphone test will be performed. Follow
the voice prompt. If the Bluetooth microphone test fails refer to AV-171, "Malfunction Code/Symptom
Chart".
9. Self-diagnosis mode is complete. A short beep is heard. E

How to Proceed with Trouble Diagnosis INFOID:0000000005909227

1. Confirm the symptom or customer complaint. F


2. Perform Bluetooth control unit self-diagnosis. Refer to AV-170, "Bluetooth Control Unit Self-Diagnosis
Function".
3. According to the symptom chart, repair or replace the cause of the symptom. Refer to AV-171, "Malfunc- G
tion Code/Symptom Chart".
4. Does the Bluetooth system operate normally? If so, GO TO 5. If not, GO TO 2.
5. Inspection End.
H
Malfunction Code/Symptom Chart INFOID:0000000005909228

I
Code/Symptom Failure Message Action
Replace Bluetooth control unit. Refer to AV-
1 "Internal failure"
105, "Removal and Installation".
J
2 "Bluetooth antenna open" 1. Inspect harness connection.
2. Replace Bluetooth antenna. Refer to
3 "Bluetooth antenna shorted" AV-174, "Removal and Installation".
AV
"Phone/Send for the Hands Free Phone
4 Check steering wheel audio control switch-
System is stuck"
es. Refer to AV-101, "Steering Wheel Audio
"Phone/End for the Hands Free Phone Control Switch Does Not Operate".
5 L
System is stuck"
1. Inspect harness between Bluetooth
control unit and Bluetooth micro-
"Bluetooth Microphone test" (failed interac-
– phone. M
tive test)
2. Replace Bluetooth microphone. Refer
to AV-174, "Removal and Installation".
1. Inspect Bluetooth control unit power N
supply and ground circuits. Refer to
AV-100, "Power Supply and Ground
Bluetooth system is inoperative – Circuit Inspection for Bluetooth Con-
trol Unit". O
2. Replace Bluetooth control unit. Refer
to AV-174, "Removal and Installation".
Steering wheel audio control switch does Refer to AV-101, "Steering Wheel Audio
– P
not operate Control Switch Does Not Operate".
Refer to AV-102, "Voice Activated Control
Voice activated control does not operate –
Function Does Not Operate".

Power Supply and Ground Circuit Inspection for Bluetooth Control Unit INFOID:0000000005905507

1.CHECK FUSES
Revision: January 2010 AV-171 2010 Sentra
TELEPHONE
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]
Make sure the following fuses for the Bluetooth control unit are not blown.

Terminals
Ignition Switch Fuse No.
Connector Terminal
1 All positions 22
B15 2 ACC/ON 6
3 ON/START 12
OK or NG
OK >> GO TO 2.
NG >> If fuse is blown, be sure to eliminate cause of malfunction before installing new fuse. Refer to PG-
3.
2.CHECK POWER SUPPLY CIRCUIT
1. Disconnect Bluetooth control unit connector B15.
2. Check voltage between connector terminals and ground as fol-
lows.

Terminals Ignition switch position


(+)
(–) OFF ACC ON
Connector Terminal
Battery Battery Battery
1
voltage voltage voltage
Battery Battery
B15 2 Ground 0V
voltage voltage WKIA4389E

Battery
3 0V 0V
voltage
OK or NG
OK >> GO TO 3.
NG >> Check harness for open between Bluetooth control unit and fuse.
3.CHECK GROUND CIRCUITS
1. Turn ignition switch OFF.
2. Check continuity between the following Bluetooth control unit
terminals and ground.

Terminals
Continuity
Connector Terminal —
4
22
B15 Ground Yes
23
27
AWNIA2194ZZ
OK or NG
OK >> Inspection End.
NG >> Repair or replace harness.
Steering Wheel Audio Control Switch Does Not Operate INFOID:0000000005905508

Refer to AV-150, "Steering Switch Check".


Voice Activated Control Function Does Not Operate INFOID:0000000005905509

NOTE:
Even under normal condition, Bluetooth voice guidance may not occur when pressing steering wheel audio
control switch.

Revision: January 2010 AV-172 2010 Sentra


TELEPHONE
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]
BLUETOOTH VOICE GUIDANCE IS HEARD WHEN PRESSING STEERING WHEEL AUDIO CON-
TROL SWITCH A
1.CHECK HARNESS BETWEEN BLUETOOTH CONTROL UNIT AND MICROPHONE
1. Turn ignition switch OFF. B
2. Disconnect Bluetooth control unit connector and microphone connector.
3. Check continuity between Bluetooth control unit connector B15
(A) and microphone connector R4 (B).
C

Terminals
Continuity
Connector Terminal Connector Terminal D
7 1
A: B15 8 B: R4 2 Yes
29 4 E

4. Check continuity between Bluetooth control unit harness con- WKIA5795E


nector B15 and ground.
F
Terminals
Continuity
Connector Terminal —
G
7
A: B15 8 Ground No
29 H
OK or NG
OK >> GO TO 2.
I
NG >> Repair harness or connector.
2.CHECK MICROPHONE POWER SUPPLY
1. Connect Bluetooth control unit connector and microphone connector. J
2. Turn ignition switch ON.
3. Check voltage between microphone connector R4 terminal 4
and ground. AV
4 - Ground : Approx. 5V
OK or NG L
OK >> GO TO 3.
NG >> Replace Bluetooth control unit. Refer to AV-174,
"Removal and Installation". M

WKIA5796E

3.CHECK MICROPHONE SIGNAL N


Check signal between Bluetooth control unit harness connector B15
terminals 7 and 8.
O
When giving a voice

P
7 – 8:

PKIB5037J
LKIA0780E

OK or NG
OK >> Replace Bluetooth control unit. Refer to AV-174, "Removal and Installation".

Revision: January 2010 AV-173 2010 Sentra


TELEPHONE
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]
NG >> Replace microphone. Refer to AV-174, "Removal and Installation".
BLUETOOTH VOICE GUIDANCE IS NOT HEARD WHEN PRESSING STEERING WHEEL AUDIO
CONTROL SWITCH
1.CHECK STEERING WHEEL AUDIO CONTROL SWITCH CIRCUIT
Refer to AV-172, "Steering Wheel Audio Control Switch Does Not Operate".
OK or NG
OK >> GO TO 2.
NG >> Replace applicable parts.
2.CHECK BLUETOOTH VOICE SIGNAL CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect Bluetooth control unit connector and AV control unit connector.
3. Check continuity between Bluetooth control unit harness con-
nector B15 (A) and AV control unit harness connector M99 (B).

Terminals
Continuity
Connector Terminal Connector Terminal
9 43
A: B15 B: M99 Yes
10 42
4. Check continuity between Bluetooth control unit harness con-
nector B15 (A) and ground.
AWNIA2195ZZ

Terminals
Continuity
Connector Terminal —
9
A: B15 Ground No
10
OK or NG
OK >> GO TO 3.
NG >> Repair harness or connector.
3.CHECK BLUETOOTH VOICE SIGNAL
Check signal between Bluetooth control unit harness connector B15
terminals 9 and 10.

When giving a voice

9 – 10:

SKIB3609E
WKIA5798E

OK or NG
OK >> Replace AV control unit. Refer to AV-159, "Removal and Installation".
NG >> Replace Bluetooth control unit. Refer to AV-174, "Removal and Installation".
Removal and Installation INFOID:0000000005905510

COMPONENTS

Revision: January 2010 AV-174 2010 Sentra


TELEPHONE
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]
Bluetooth Control Unit and Antenna
A

I
ALNIA0977ZZ

1. Bluetooth control unit bracket 2. Bluetooth control unit 3. Bluetooth antenna


J
Front

BLUETOOTH CONTROL UNIT


AV
Removal
NOTE:
Bluetooth control unit shown with the LH seat removed for clarity.
L
1. Disconnect the battery negative terminal.
2. Slide the LH front seat toward the front to remove the bluetooth
control unit bracket rear bolt (A).
M
3. Slide the LH front seat toward the rear to remove the bluetooth
control unit bracket front bolts (A).
4. Detach the Bluetooth control unit harness clip (B) from the Blue-
N
tooth control unit bracket.
5. Disconnect the Bluetooth control unit connector (C).
6. Remove the Bluetooth control unit and bracket assembly (1).
O
7. Remove the Bluetooth control unit screws and remove the Blue-
tooth control unit. ALNIA0978ZZ

Installation P
Installation is in the reverse order of removal.
BLUETOOTH ANTENNA
Removal
NOTE:
Bluetooth antenna is mounted on top of the Bluetooth control unit.
1. Disconnect the battery negative terminal.

Revision: January 2010 AV-175 2010 Sentra


TELEPHONE
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]
2. Slide the LH front seat toward the rear.
3. Disconnect the Bluetooth antenna connector.
4. Remove the Bluetooth antenna screws and remove the Bluetooth antenna.
Installation
Installation is in the reverse order of removal.
BLUETOOTH MICROPHONE
Removal
1. Disconnect the battery negative terminal.
2. Remove the map lamp. Refer to LT-81, "Map Lamp".
3. Remove the Bluetooth microphone.
Installation
Installation is in the reverse order of removal.

Revision: January 2010 AV-176 2010 Sentra


REAR VIEW CAMERA
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]
REAR VIEW CAMERA
A
Component Parts and Harness Connector Location INFOID:0000000005905511

AV

M
AWNIA2196ZZ

1. Front tweeter LH M46 2. AV control unit M92, M99 3. Front tweeter RH M47
Steering wheel audio control switch- Back-up lamp switch F47 (manual N
4. 5. Rear view camera T21 6.
es transmission)
Transmission range switch F26
7.
(CVT)
O
System Description INFOID:0000000005905512

REAR VIEW CAMERA SYSTEM P


When the shift selector is in the R position, the AV control unit shows a view to the rear of the vehicle. Lines
which indicate the vehicle clearance and distances are also displayed.

Revision: January 2010 AV-177 2010 Sentra


REAR VIEW CAMERA
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]
Rear View Camera System Diagram

AWNIA2012GB

Part name Description


• Sends camera ON signal to the rear view camera
AV control unit
• Receives camera image signal from the rear view camera
• Receives camera ON signal from the AV control unit
Rear view camera
• Sends image signal to the AV control unit

Revision: January 2010 AV-178 2010 Sentra


REAR VIEW CAMERA
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]
Wiring Diagram - R/VIEW - INFOID:0000000005905513

AV

AANWA0297GB
P
Rear View Camera Power Supply and Ground Circuit Inspection INFOID:0000000005905514

1.CHECK POWER SUPPLY CIRCUIT (REAR VIEW CAMERA SIDE)

Revision: January 2010 AV-179 2010 Sentra


REAR VIEW CAMERA
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]
1. Turn ignition switch ON.
2. Shift transmission into Reverse.
3. Check voltage between rear view camera harness connector
T21 and ground.

(+) Transmission
(-) Value (Approx.)
Connector Terminal position

T21 4 Ground Reverse 6V


Is voltage reading approximately 6 volts?
YES >> GO TO 4. AWNIA2020ZZ

NO >> GO TO 2.
2.CHECK POWER SUPPLY CIRCUIT (CONTINUITY)
1. Turn ignition switch OFF.
2. Disconnect rear view camera and AV control unit connectors.
3. Check continuity between rear view camera harness connector
T21 (A) terminal 4 and AV control unit harness connector M99
(B) terminal 34.

A B
Continuity
Connector Terminal Connector Terminal
T21 4 M99 34 Yes
4. Check continuity between rear view camera harness connector AWNIA2197ZZ

T21 (A) terminal 4 and ground.

A
— Continuity
Connector Terminal
T21 4 Ground No
Are continuity test results as specified?
YES >> GO TO 3.
NO >> Repair harness or connector.
3.CHECK POWER SUPPLY CIRCUIT (AV CONTROL UNIT SIDE)
1. Connect AV control unit harness connector.
2. Turn ignition switch ON.
3. Check voltage between AV control unit harness connector M99
and ground.

(+) Transmission
(-) Value (Approx.)
Connector Terminal position

M99 34 Ground Reverse 6V


Is voltage reading approximately 6 volts?
YES >> Inspection End. AWNIA2198ZZ

NO >> Replace AV control unit. Refer to AV-159, "Removal and


Installation".
4.CHECK GROUND CIRCUIT

Revision: January 2010 AV-180 2010 Sentra


REAR VIEW CAMERA
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]
1. Turn ignition switch OFF.
2. Disconnect rear view camera harness connector. A
3. Check continuity between rear view camera harness connector
T21 terminal 3 and ground.
B
Connector Terminal — Continuity
T21 3 Ground Yes
Does continuity exist? C
YES >> Inspection End.
NO >> Repair harness or connector. AWNIA2021ZZ

D
Camera Image Signal Circuit INFOID:0000000005909179

E
1.CHECK CAMERA IMAGE SIGNAL CIRCUIT CONTINUITY
1. Turn ignition switch OFF.
2. Disconnect AV control unit connector and rear view camera connector. F
3. Check continuity between AV control unit harness connector
M99 (A) terminals 35, 36 and rear view camera harness connec-
tor T21 (B) terminals 1, 2. G

35 - 1 : Continuity should exist.


36 - 2 : Continuity should exist. H
4. Check continuity between AV control unit harness connector
M99 (A) terminals 35, 36 and ground.
I
35, 36 - Ground : Continuity should not exist. AWNIA2206ZZ

Is inspection result OK?


YES >> GO TO 2 J
NO >> Repair harness or connector.
2.CHECK CAMERA IMAGE SIGNAL AV
1. Connect AV control unit connector and rear view camera connector.
2. Turn ignition switch ON.
3. Shift transmission into reverse.
L
4. Check signal between AV control unit harness connector M99
terminals 35 and 36.

35 - 36 : M

SKIB2251J O
AWNIA2207ZZ

Is inspection result OK?


YES >> Replace AV control unit. Refer to AV-159, "Removal and Installation".
NO >> Replace rear view camera. Refer to AV-182, "Removal and Installation". P

Revision: January 2010 AV-181 2010 Sentra


REAR VIEW CAMERA
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]
Removal and Installation INFOID:0000000005905515

ALNIA1211ZZ

1. Licence lamp finisher 2. Trunk opener request switch (if equipped) 3. Rear view camera
A. License lamp finisher nut B. Rear view camera connector

REMOVAL
1. Remove trunk lid finisher. Refer to EI-44, "Removal and Installation".
2. Disconnect the rear view camera connector.
3. Remove the license plate finisher. Refer to EI-25, "Removal and Installation".
4. Press in the rear view camera tab (A) then release the rear view
camera hook (B) and remove the rear view camera.

ALNIA1212ZZ

INSTALLATION
Installation is in the reverse order of removal.

Revision: January 2010 AV-182 2010 Sentra


USB CONNECTOR AND AUX JACK
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]
USB CONNECTOR AND AUX JACK
A
Removal and Installation INFOID:0000000005909201

REMOVAL B
1. Remove the center console assembly. Refer to IP-12, "Removal and Installation".
2. Push the pawl from the back of the center console to remove the
USB connector and aux jack (1). C

ALNIA1209ZZ
F
INSTALLATION
Installation is in the reverse order of removal.
G

AV

Revision: January 2010 AV-183 2010 Sentra


AUDIO ANTENNA
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]
AUDIO ANTENNA
Location of Antenna INFOID:0000000005905496

AWNIA2199ZZ

1. Roof antenna 2. Roof antenna base connectors 3. Antenna feeder


4. Antenna feeder connector 5. AV control unit 6. Roof antenna base
A. Antenna feeder clips

Removal and Installation of Roof Antenna INFOID:0000000005905497

REMOVAL
1. Partially remove the rear body side welts. Refer to EI-41, "Removal and Installation".
2. Remove rear pillar finishers. Refer to EI-41, "Removal and Installation".
3. Remove rear assist grip (LH). Refer to EI-41, "Removal and Installation".
4. Remove three headliner rear clips. Pull down the rear part of the headliner to reposition out of the way.
CAUTION:
Use care when repositioning headliner to avoid causing damage.

Revision: January 2010 AV-184 2010 Sentra


AUDIO ANTENNA
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]
5. Disconnect the roof antenna harness connectors (B).
6. Remove the roof antenna nut (A) and remove the roof antenna A
(1).

LKIA0863E

D
INSTALLATION
Installation is in the reverse order of removal.
E

AV

Revision: January 2010 AV-185 2010 Sentra


GPS ANTENNA
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]
GPS ANTENNA
Location of Antenna INFOID:0000000005907619

AWNIA2205ZZ

1. AV control unit 2. Antenna feeder 3. GPS antenna (view with combination


meter removed)

Removal and Installation INFOID:0000000005905498

REMOVAL
1. Remove cluster lid C and disconnect the GPS navigation antenna harness. Refer to IP-12, "Removal and
Installation".
2. Remove the combination meter. Refer to IP-12, "Removal and Installation".

Revision: January 2010 AV-186 2010 Sentra


GPS ANTENNA
< SERVICE INFORMATION > [AUDIO WITH NAVIGATION]
3. Remove the GPS navigation antenna screw (A).
4. Remove the GPS navigation antenna (1) A

ALNIA1210ZZ

D
INSTALLATION
Installation is in the reverse order of removal.
E

AV

Revision: January 2010 AV-187 2010 Sentra

Вам также может понравиться