Академический Документы
Профессиональный Документы
Культура Документы
DESCRIPTION FEATURES
JW1779 is a non-isolated, constant output current Integrate 500V, Low Rdson MOSFET
step-down LED driver with 500V MOSFET 30Ohm,100mA maximum output current
integrated. Operating in the boundary mode Excellent line/load regulation
makes it high efficiency and low radiation. Boundary mode operation
Patented algorithms ensure good current High efficiency
accuracy and excellent line/load regulations with LED SCP
lowest BOM cost. VDD UVLO
JW1779 is supplied from the MOSFET drain Over-temperature protection
directly, so the auxiliary winding is eliminated, Brown Out Protection
which can light up the LED within 100mS. Inductor short protection
With unique sampling techniques, JW1779 has TO-92 package
multi-protection functions which can largely
APPLICATIONS
enhance the safety and reliability of the system,
LED lighting
including VDD UVLO, inductor short protection,
LED short protection and over-temperature
protection.
TYPICAL APPLICATION
AC IN
JW1779 DRAIN
VDD GND
Rcs
ORDER INFORMATION
PIN CONFIGURATION
TOP VIEW
TO-92
ELECTRICAL CHARATERISTICS
℃
TA=25 , unless otherwise stated
Item Symbol Condition Min. Typ. Max. Units
VDD Regulation Voltage VDD 5.4 V
PIN DESCRIPTION
This pin supplies current to the internal start-up circuitry. This pin must be locally
1 VDD
bypassed with a capacitor
BLOCK DIAGRAM
VDD
DRAIN
OTP UVLO VDD charging
Control
Output Constant
Driver
SCP current control
GND
54
53.5
53
52.5
52 Tc=30°
51.5 Tc=85°
51 Tc=-35°
50.5
50
49.5
0 50 100 150 200 250 300
FUNCTIONAL DESCRIPTION
The JW1779 is a constant current LED driver increases from zero linearly. The turn on time of
which applies to non-isolation step-down LED the MOSFET can be calculated as:
system. JW1779 can achieve excellent line and
load regulation, high efficiency and low system
cost with few peripheral components.
Start Up
When the internal high voltage start-up circuit
charges VDD up to the turn-on threshold, the
gate driver starts to switch. In the normal
working state, the current source charges VDD
to 5.4V when the power MOSFET is off. Once
the voltage of VDD is lower than 4.4V, JW1779
stops switching.
REFERENCE DESIGN
This reference design is suitable for 2~ 3W non-isolated Step-down LED driver, using JW1779, with
high efficiency, excellent line regulation.
Reference:
VIN: 90VAC~264VAC
VOUT: 40~60V
IOUT: 50mA
PF: >0.4
R1 NC/0805 LED+
1
B1 3.9mH LED+
1
HD06
F1 3 4 L1
82K/5%/1206
1
L C4
2
27R/0.5W
1uF/250V
50mA/60V
D1 R2
2
1
4.7uF/400V
ES1J
1
N C2 L2
0.1uF/450V
+
DRAIN LED-
1
C1 U1
4mH
3
Drain
LED-
2
GND
1uF/10V/0805C JW1779
1
VDD
VDD
JW1780
C3
RS2 GND
12R/1%/0805
PACKAGE OUTLINE
TO-92 UNIT : mm
±
4.55 0.30
3.43min
0.46 ±0.20
1.27TYP
±0.40
2.50
IMPORTANT NOTICE
Joulwatt Technology Inc. reserves the right to make modifications, enhancements, improvements,
corrections or other changes without further notice to this document and any product described herein.
Any unauthorized redistribution or copy of this document for any purpose is strictly forbidden.
Joulwatt Technology Inc. does not warrant or accept any liability whatsoever in respect of any products