Вы находитесь на странице: 1из 20

FEROZPUR DIVISION-ENGINEERING/NORTHERN RLY

TENDER DOCUMENT
Tender No: 216-2017-18-DRM-FZR-ASR Closing Date/Time: 27/11/2017 15:00

DEN/Sr.DEN acting for and on behalf of The President of India invites E-Tenders against Tender No 216-2017-18-DRM-FZR-ASR Closing
Date/Time 27/11/2017 15:00 Hrs. Bidders will be able to submit their original/revised bids upto closing date and time only. Manual offers are not
allowed against this tender, and any such manual offer received shall be ignored.

Contractors are allowed to make payments against this tender towards tender document cost and earnest money only through only payment
modes available ON IREPS portal LIKE net banking, debit card, credit card etc. Manual payments through Demand draft, Banker cheque, Deposit
receipts, FDR etc. are not allowed.

1. NIT HEADER

Contract Type Works


Name of Work Joint development of Railway Station Amritsar in association with Ministry of Tourism under DEN/ASR.
Tender Type Open Bidding System Single Packet System
Tender Closing Date Time 27/11/2017 15:00 Date Time Of Uploading Tender 18/10/2017 12:50
Pre-Bid Required No Pre-Bid Query Date Time Not Applicable
Advertised Value 79642169.91 Tendering Section WORKS
Bidding Style Single Rate for Each Schedule Item Bidding Unit
Earnest Money (Rs.) 548220.00 Validity of Offer ( Days) 90
Tender Doc. Cost (Rs.) 10000.00 Period of Completion 8 Months
Bidding Start Date 13/11/2017

2. SCHEDULE

S.No. Item Code Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Unit
Schedule A-USSOR-2010 58171311.06
Above/
Please see Item Breakup for details. 115108.30 (-) 4.05 110446.41
1 Below/Par
Item Description:- CH.-1 Earth Work
Above/
Please see Item Breakup for details. 31911.72 2.55 32725.47
2 Below/Par
Item Description:- CH.-2 Carriage of Material
Above/
Please see Item Breakup for details. 17010332.29 4.68 17806415.84
3 Below/Par
Item Description:- CH.-3 Plain Concrete
Above/
Please see Item Breakup for details. 6673327.08 5.40 7033686.74
4 Below/Par
Item Description:- CH.-4 Reinforced Cement Concrete Work
Above/
Please see Item Breakup for details. 2103431.89 16.23 2444818.89
5 Below/Par
Item Description:- CH.5 Brick Work
Above/
Please see Item Breakup for details. 140408.10 At Par 140408.10
6 Below/Par
Item Description:- CH.-6 Stone Work
Above/
Please see Item Breakup for details. 1144766.87 2.07 1168463.54
7 Below/Par
Item Description:- CH.7 Wood Work
Above/
Please see Item Breakup for details. 5716610.36 (-) 4.10 5482229.34
8 Below/Par
Item Description:- CH.8 Steel & Aluminium Work
Above/
Please see Item Breakup for details. 12333531.53 (-) 4.23 11811823.15
9 Below/Par
Item Description:- CH.9 Flooring, Paving & Dado
Above/
Please see Item Breakup for details. 4098432.30 (-) 0.31 4085727.16
10 Below/Par
Item Description:- CH.10 Roofs & Ceiling
Above/
Please see Item Breakup for details. 963471.18 (-) 8.64 880227.27
11 Below/Par
Item Description:- CH.11 Finishing Masonry
Above/
Please see Item Breakup for details. 192026.82 (-) 6.95 178680.96
12 Below/Par
Item Description:- CH.-12 Painting, Polishing & Varnishing
Above/
Please see Item Breakup for details. 1545370.69 1.04 1561442.55
13 Below/Par
Item Description:- CH.13 Water Supply
Above/
Please see Item Breakup for details. 2276874.65 (-) 4.07 2184205.85
14 Below/Par
Item Description:- CH.14 Drainage and Sewerage
Above/
Please see Item Breakup for details. 463973.09 (-) 16.93 385422.45
Below/Par
15
Item Description:- CH.15 Sanitary Installations

Pa g e 1 o f 2 0 Ru n Da te Time: 18 /10 /2 0 17 12 :5 1:0 6


FEROZPUR DIVISION-ENGINEERING/NORTHERN RLY
TENDER DOCUMENT
Tender No: 216-2017-18-DRM-FZR-ASR Closing Date/Time: 27/11/2017 15:00

Above/
Please see Item Breakup for details. 29519.40 (-) 10.07 26546.80
16 Below/Par
Item Description:- CH.16 Horticulture & Landscaping
Above/
Please see Item Breakup for details. 1556903.01 (-) 9.29 1412266.72
17 Below/Par
Item Description:- CH.17 Misc. Building Works
Above/
Please see Item Breakup for details. 800436.90 (-) 1.80 786029.04
18 Below/Par
Item Description:- CH.18 Dismantling & Demolishing
Above/
Please see Item Breakup for details. 651471.26 (-) 1.80 639744.78
19 Below/Par
Item Description:- CH.23 Roads & Platform Work

S.No. Item Code Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Unit
Schedule B-NS Items 21470858.85
Above/
Please see Item Breakup for details. 21470858.85 At Par 21470858.85
1 Below/Par
Item Description:- NS Items

3. ITEM BREAKUP

Schedule Schedule A-USSOR-2010


Item- 1 CH.-1 Earth Work
S No. Item No Description of Item Unit Qty Rate Amount
Earth work in excavation as per approved drawings and dumping at embankment site
or spoil heap, within railway land, including 50m lead and 1.5m lift, the lead to be
measured from the centre of gravity of excavation to centre of gravity of spoil heap:
the lift to be measured from natural ground level and paid for in layers of 1.5m each,
including incidental work, as per specifications-in
1 011011 All kinds of soils cum 400.00 81.36 32544.00
2 012010 Extra over item 011010 for excavation in foundations for buildings and bridges to cum 30.00 8.70 261.00
cover dressing to neat dimension and plumbing sides etc. Note : Dressing under this
item is payable for the total quantity of excavation in foundation and not partly
3 012030 Extra for watering and ramming earth in foundation and floors in 15cm layers. Note : cum 170.00 15.40 2618.00
This item is payable where ramming is not included in the original rate for earthwork in
filling.
4 012040 Filling, watering and ramming earth in 15 cm layers in floors and foundations with cum 81.00 18.30 1482.30
surplus earth from foundations including 50m lead and 1.5m lift
5 012050 Supplying and filling sand in plinth and under floors including watering, ramming, cum 55.00 725.00 39875.00
consolidating and dressing complete
6 013140 Removal of excavated/slip earth/ debris/ malba from the site of works to any other cum 400.00 95.82 38328.00
place outside Railway land/premises, including all excavations, handling, re-handling,
loading, unloading and leading, etc. all labour and material as a complete job. Removal
of Earth (all kinds of soils)/ROCKS, BOULDERS including mud/slush, slipped earth in
catch water drains, side drains, over berms in cutting, water way of bridges, over
coping of toe/breast/retaining walls etc. including crossing of nallah, railway tracks,
making/repairing approach roads if required, all lead, lift, ascent, descents, or any
other obstruction. Earth spoils to be dumped outside the cutting or railway
embankments as per direction of Engineer in charge
Total 115108.30
Item- 2 CH.-2 Carriage of Material
S No. Item No Description of Item Unit Qty Rate Amount
1 021090 Leading ballast, kankar, brickbats, stone-chips, shingle, stone boulders, block cum 172.00 98.26 16900.72
kankar, pitching stones, rubble stones, laterite, coal, surkhi, dry mortar, sand,
moorum, earth, manure or sludge, ashes, lime, debris, muck, malba, etc. for lead upto
25 km. Note : Lead under this item is payable when the same exceeds 500m.
2 021150 Leading miscellaneous materials such as iron work, rails, fittings & fastenings, pipes, MT 50.00 177.74 8887.00
wooden logs, stones over pitching stone size, RCC/PCC beams / slabs etc and all
similar articles (each individual article or bundle being not more than 3.5 metres long in
the longest direction) including all loading, unloading and stacking, lead over 500m and
upto 10 km. Note : Lead under this item is payable when the same exceeds 500m.
3 021510 Hiring of JCB Machine (in good working condition) for leveling and dressing ground / Hour 10.00 612.40 6124.00
dismantling structures including disposal of debris through dumpers etc. with
contractor's labour, JCB machine, machine operator, fuel, etc. The contractor shall
arrange road permit for vehicle for all the States of operation, as per instructions of
engineer in-charge and vehicle shall not be more than three years old. Payment shall
be made for actual working hours at site.
Total 31911.72
Item- 3 CH.-3 Plain Concrete
S No. Item No Description of Item Unit Qty Rate Amount

Pa g e 2 o f 2 0 Ru n Da te Time: 18 /10 /2 0 17 12 :5 1:0 6


FEROZPUR DIVISION-ENGINEERING/NORTHERN RLY
TENDER DOCUMENT
Tender No: 216-2017-18-DRM-FZR-ASR Closing Date/Time: 27/11/2017 15:00

Providing and laying in position cement concrete of specified proportion excluding


cost of cement, centering and shuttering - All works upto Plinth level :
1 031011 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20mm nominal size) cum 975.00 1972.51 1923197.25
2 031014 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size) cum 77.00 1746.01 134442.77
Dry concrete without mortar in foundation and floors rammed in layers not exceeding
15 cm thick :
3 031041 a) With graded stone aggregate 40mm nominal size cum 2656.54 1289.99 3426910.03
Providing and fixing at or near ground level, Precast M 20 grade cement concrete as
per approved design and setting in position with cement mortar 1:3 (1 cement : 3
coarse sand), including the cost of required centering and shuttering complete but
excluding the cost of cement.(cast at site)
4 032031 in kerbs, edging etc. cum 138.33 2226.98 308058.14
Providing and laying cement concrete 1:2:4 in damp-proof course (1 cement : 2 sand
: 4 graded stone aggregate 12.5mm nominal size - excluding the cost of cement and
including providing, fixing and removal of forms.
5 032052 40mm thick Sqm 22.35 130.50 2916.68
6 032070 Applying a coat of residual petroleum bitumen of penetration 80/ 100 of approved Sqm 23.00 127.53 2933.19
quality using 1.7kg per square metre on damp proof course after cleaning the surface
with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
Providing Precast plain cement concrete jali 1:2:4 (1 cement : 2 sand : 4 stone chips
12.5mm nominal size) including hoisting and setting in position with cement mortar 1:3
(1 cement : 3 coarse sand) including the cost of centering, shuttering and finishing
complete including the cost of cement and of plastering of jambs, sills and soffits.
7 032082 50mm thick Sqm 92.03 393.07 36174.23
Supply and using cement at worksite :
8 033063 PPC Tonne 2150.00 5198.00 11175700.00
Total 17010332.29
Item- 4 CH.-4 Reinforced Cement Concrete Work
S No. Item No Description of Item Unit Qty Rate Amount
Providing and laying in position M 20 Grade concrete for reinforced concrete
structural elements but excluding cost of centering, shuttering, reinforcement and
Admixtures in recommended proportion (as per IS:9103) to accelerate, retard setting
of concrete, improve workability without impairing strength and durability as per
direction of Engineer in charge
1 041011 All work upto plinth level, including raft foundation of washable aprons, HS tank, pile cum 125.00 2422.38 302797.50
cap, footings of FOB, and Platform shelter etc.
2 041012 All work in buildings above plinth level upto floor two level. cum 302.05 2645.23 798991.72
3 041015 In kerbs, steps and the likes etc. cum 2.86 2413.93 6903.84
4 041016 In arches, arch ribs, domes, vaults, shells, folded plates and roofs having slopes cum 19.00 2215.56 42095.64
above 150
5 041018 In vertical and Horizontal fins individually or forming box louvers, facias and eaves cum 6.00 2209.61 13257.66
boards
Centering and shuttering including strutting, propping etc. and removal of form for :
6 042011 Foundations, footings, bases of columns, raft foundation of washable aprons, Pile Sqm 160.00 120.60 19296.00
caps, Footings of FOB etc.
7 042012 Walls (any thickness) including attached plasters, buttresses, plinth and string Sqm 4.00 191.20 764.80
courses etc.
8 042013 Suspended floors, roofs, landings, balconies, FOB slabs, walkway slabs and access Sqm 910.00 185.57 168868.70
platform
9 042014 Lintels, beams, plinth beams, bed blocks, girders, bressumers and cantilevers Sqm 475.00 163.20 77520.00
10 042015 Columns, pillars, , posts and struts Sqm 535.00 240.50 128667.50
11 042016 Stairs (excluding landings) except spiral-staircases Sqm 32.00 225.10 7203.20
12 042018 Arches, domes, vaults upto 6m span Sqm 150.00 589.10 88365.00
13 042019 Extra for arches, domes, vaults exceeding 6m span Sqm 85.00 252.69 21478.65
Centering and shuttering including strutting, propping etc. and removal of form for
special shapes
14 042024 Small lintels not exceeding 1.5m clear span, moulding as in cornices, window sills, Sqm 11.00 87.32 960.52
string courses, bands, copings, bed plates, anchor blocks and items of similar shape
and size
15 042025 Edges of slabs and beams in floors and walls under 20 cm wide Metre 285.00 65.70 18724.50
16 042027 Cornices and mouldings Sqm 14.00 418.55 5859.70
17 042028 Small surfaces such as cantilever ends, brackets and ends of steps, caps and bases Sqm 10.00 291.92 2919.20
to pilasters and columns and items of similar shape and size
18 042029 Weather shade, Chajjas, corbels etc. including edges Sqm 12.00 331.42 3977.04
19 042040 Supplying and applying shuttering oil for mould releasing, having (Flash point 54 Sqm 910.00 6.55 5960.50
degree C and specific gravity 0.88±0.02) for concrete formwork to be applied either
by brush or with spray machine to the entire satisfaction of Engineer Incharge

Pa g e 3 o f 2 0 Ru n Da te Time: 18 /10 /2 0 17 12 :5 1:0 6


FEROZPUR DIVISION-ENGINEERING/NORTHERN RLY
TENDER DOCUMENT
Tender No: 216-2017-18-DRM-FZR-ASR Closing Date/Time: 27/11/2017 15:00

Providing, hoisting and fixing in position upto floor two level M20 Grade precast RCC
work including setting in cement mortar 1:3 (1 cement : 3 coarse sand) and finishing
smooth with 6mm thick cement plaster 1:3 (1 cement : 3 fine sand) on exposed
surfaces complete including cost of centering, shuttering, finishing, Admixtures in
recommended proportion (as per IS:9103) to accelerate, retard setting of concrete,
improve workability without impairing strength and durability, excluding cost of cement
and steel reinforcement, as per approved plan & direction of Engineer incharge.
20 043015 In slabs for drain covers, manhole covers, flue tops etc. cum 6.00 2870.14 17220.84
21 044010 Encasing rolled steel sections, in beams and columns with Grade 15 cement concrete cum 6.00 4523.88 27143.28
1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 12.5mm nominal size) including
centering and shuttering but excluding the cost of cement and reinforcement,
ungalvanised wire mesh/expanded metal and hangers.
22 044020 Extra for providing and fixing expanded metal mesh of size 20x60mm and strands Sqm 32.00 278.60 8915.20
3.25 mm wide 1.6mm thick weighing 3.64kg. per sqm for encasing of rolling steel
sections/built up sections in beams, columns and grillages excluding cost of hangers.
Supplying Reinforcement for R.C.C. work including straightening, cutting, bending,
placing in position and binding all complete.
23 045016 Thermo-Mechanically Treated bars Kg 103050.00 47.58 4903119.00
24 046010 Extra for RCC work in superstructure above floor two level for every floor or part cum 8.27 280.18 2317.09
thereof.
Total 6673327.08
Item- 5 CH.5 Brick Work
S No. Item No Description of Item Unit Qty Rate Amount
Brick work with non-modular (FPS) bricks of class designation 7.5 in foundation and
plinth in :
1 051014 Cement mortar 1:4 (1 cement : 4 fine sand) cum 225.00 2218.05 499061.25
2 051018 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 360.00 2218.87 798793.20
3 051040 Extra over item 051010 & 051020 for brick work in superstructure beyond plinth level cum 335.00 133.42 44695.70
upto floor two level :
4 051050 Extra for brick work in superstructure beyond second floor level for every 3m or part cum 9.79 264.82 2592.59
thereof :
Half brick masonry with bricks of class designation 7.5 in foundations and plinth in :
5 051182 Cement mortar 1:4 (1 Cement : 4 coarse sand) Sqm 675.00 263.83 178085.25
6 051190 Extra for half Brick masonry in superstructure above plinth level upto floor two level Sqm 675.00 36.40 24570.00
7 051210 Extra for providing and placing in position 2 Nos. 6mm dia. M.S.bars at every third Sqm 665.29 50.73 33750.16
course of half brick masonry (with non-modular (FPS) bricks) including cost of M.S.
bars
Tile brick masonry with machine moulded tile bricks of class designation 12.5
conforming to IS : 2690 (Part I) - 1992 in foundation and plinth in:
8 052021 cement mortar 1:6 (1 Cement : 6 coarse sand) cum 55.00 3748.66 206176.30
9 052060 Extra over Item (Item 052011 and 052021) for tile brick masonry in square or cum 55.00 213.25 11728.75
rectangular pillars.
10 054010 Moulding and cornices with brick masonry in cement mortar 1:4 (1 Cement : 4 coarse metre/ cm 378.00 1.15 434.70
sand) (girth to be measured in cm and length in running metre) girth
Brick work with selected non-modular (FPS) bricks of class designation 7.5 in
Exposed brickwork including making horizontal and vertical grooves 10mm wide,
12mm deep complete from ground level upto plinth level in cement mortar
11 055012 1:6 (1 Cement : 6 coarse sand) cum 113.00 2262.47 255659.11
12 055060 Extra for exposed brickwork in superstructure above plinth level upto floor two level. cum 113.00 423.76 47884.88
Total 2103431.89
Item- 6 CH.-6 Stone Work
S No. Item No Description of Item Unit Qty Rate Amount
Stone tile work for wall lining upto 10m height with special adhesive like araldite or
equivalent over 12mm thick bed of cement mortar 1:3 (1cement: 3coarse sand)
including pointing in white cement with an admixture of pigment to match the stone
shade
1 065202 8mm thick (mirror polishing and machine cut edge) Granite brown Ruby Red stone Sqm 135.00 1040.06 140408.10
Total 140408.10
Item- 7 CH.7 Wood Work
S No. Item No Description of Item Unit Qty Rate Amount
Providing and fixing panelled/glazed or panelled and glazed shutters for doors,
windows and clerestory windows including ISI marked black enamelled M.S. butt
hinges with necessary screws excluding, panelling/glazing which will be paid for
separately
1 072015 Kail, venteak, pillamarudhu or locally available comparable species of good country Sqm 150.00 1017.96 152694.00
wood (to be listed by respective railway). 35mm thick
2 072016 Kail, venteak, pillamarudhu or locally available comparable species of good country Sqm 40.00 935.60 37424.00
wood (to be listed by respective railway). 30mm thick

Pa g e 4 o f 2 0 Ru n Da te Time: 18 /10 /2 0 17 12 :5 1:0 6


FEROZPUR DIVISION-ENGINEERING/NORTHERN RLY
TENDER DOCUMENT
Tender No: 216-2017-18-DRM-FZR-ASR Closing Date/Time: 27/11/2017 15:00

Providing and fixing panelling/glazing or panelling and glazing in panelled/ glazed or


panelled and glazed shutters for doors, windows and clerestory windows (Area of
opening for panel inserts excluding portion inside grooves or rebates to be
measured). Panelling/glazing for panelled/ glazed or panelled and glazed shutters
25mm to 40mm thick
3 072025 Ply wood 5ply 9mm thick. Commercial ply on one face and teak ply on other face Sqm 68.00 991.92 67450.56
Providing and fixing paneling and/or glazing in panelled and/or glazed shutters for
doors, windows and clerestory windows (Area of opening for panel inserts excluding
portion inside grooves or rebates to be measured). Panelling/glazing for panelled/
glazed or panelled and glazed shutters 25mm to 40mm thick
4 072037 Glazing with float glass panes 4mm thick (10kg/sqm) Sqm 15.00 260.07 3901.05
5 072040 Extra for providing heavy float glass panes 13.75kg/ Sqm. (5.5mm thick) instead of Sqm 15.00 69.69 1045.35
ordinary float glass panes 10kg sqm. (4mm thick), in doors, windows and clerestory
window shutters. (Area of opening for glass panes excluding portion inside rebate
shall be measured)
6 072050 Deduction for providing frosted glass panes 10kg/Sqm (4mm thick) instead of Sqm 5.00 -69.69 -348.45
ordinary glass panes 10kg/Sqm (4mm thick) in doors, windows and clerestory
window shutters. (Area of opening for glass panes excluding portion inside rebate
shall be measured)
Providing and fixing wire gauge shutter using galvanized M.S. wire gauge of average
width of aperture 1.4mm with wire of dia 0.63mm for doors, windows and clerestory
windows including ISI marked bright finished or black enamelled M.S. butt hinges with
necessary screws
7 072095 Kail, venteak, pillamarudhu or locally available comparable species of good country Sqm 159.00 1011.22 160783.98
wood (to be listed by respective railway). - 35mm thick Kail wood
8 072100 Extra over Item 072090 for providing SS wire gauge instead of Galvanised MS wire Sqm 159.00 162.61 25854.99
gauge
Extra for providing vision panel not exceeding 0.1 sqm in all type of flush door
shutters including providing and fixing glass panes in the panel. area of vision panel to
be measured
9 072181 Rectangular or square Sqm 1.00 104.54 104.54
Providing and fixing 25mm thick cup board shutters , with veneered particle board
conforming to IS 3097 - Grade1 of approved make including second class teak wood
lipping 25x12mm thick with necessary screws and nickel plated bright finished MS
piano hinges complete
10 073041 With teak veneering on one side and commercial veneering on other side Sqm 46.00 2456.12 112981.52
11 073050 Extra if ISI marked anodised aluminium butt hinges with necessary screws are used Sqm 46.00 118.70 5460.20
in place of ISI marked black enamelled MS butt hinges with necessary screws
Providing and fixing expandable fasteners of specified size with necessary plastic
sleeves and galvanized M.S. screws including drilling holes in masonry work/ CC/
R.C.C. and making good etc. complete
12 074024 50mm long Each 80.00 21.60 1728.00
Providing and fixing wooden moulded beading to door and window frames with iron
screws, plugs and priming coat on unexposed surface etc. complete
13 074132 2nd class teak wood, 50x20mm Metre 313.00 96.46 30191.98
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S.
flats, square or round bars etc. all complete
14 074231 Fixed to steel windows by welding Kg 465.05 64.31 29907.37
15 074280 Providing 40x5mm flat iron hold fast 40cm long including fixing to frame with 10mm Each 450.00 58.54 26343.00
diameter bolts, nuts and wooden plugs and embeddings in cement concrete block
30x10x15cm 1:3:6 mix (1cement: 3coarse sand: 6graded stone aggregate 20mm
nominal size)
Providing and fixing M.S. pressed butt hinges generally conforming to IS:1341, bright
satin finish with necessary screws etc. complete of size
16 075012 100x58x1.90mm Each 450.00 17.93 8068.50
17 075013 75x47x1.70mm Each 240.00 11.67 2800.80
Providing and fixing M.S. double acting spring hinges generally conforming to IS: 453,
bright satin finish with necessary screws etc. complete of size
18 075042 125mm Each 2.00 118.57 237.14
Providing and fixing M.S. hasp and staple (Safety type) with necessary screws etc.
complete.
19 075113 90mm Each 10.00 11.65 116.50
Providing and fixing special quality chromium plated brass cup board locks with six
levers including necessary screws etc. complete (best make of approved quality) of :
20 077363 Size 65mm Each 10.00 117.31 1173.10
Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating
not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or
shade with nuts and screws etc. complete
21 078021 300x16mm Each 23.00 178.83 4113.09

Pa g e 5 o f 2 0 Ru n Da te Time: 18 /10 /2 0 17 12 :5 1:0 6


FEROZPUR DIVISION-ENGINEERING/NORTHERN RLY
TENDER DOCUMENT
Tender No: 216-2017-18-DRM-FZR-ASR Closing Date/Time: 27/11/2017 15:00

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not
less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or
shade with necessary screws etc. complete
22 078032 250x10mm Each 36.00 57.87 2083.32
23 078034 150x10mm Each 160.00 39.69 6350.40
Providing and fixing aluminium handles ISI marked anodised (anodic coating not less
than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade
with necessary screws etc. complete
24 078061 125mm Each 36.00 38.04 1369.44
25 078063 75mm Each 160.00 30.14 4822.40
Providing and fixing aluminium hanging floor door stopper ISI marked anodised
(anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to
required colour and shade with necessary screws etc. complete
26 078072 Twin rubber stopper Each 36.00 68.86 2478.96
27 078080 Providing and fixing aluminium casement stays 250mm long ISI marked anodised Each 80.00 63.64 5091.20
(anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to
required colour and shade with necessary screws etc. complete
28 078090 Providing and fixing bright finished brass 100mm mortic latch and lock ISI marked with Each 3.00 485.63 1456.89
six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS:
1868) aluminium lever handles with necessary screws etc. complete (best make of
approved quality)
29 078100 Providing and fixing aluminium tee channels (heavy duty) with rollers, stop end in Metre 90.00 58.17 5235.30
pelmets as curtain rod
30 078130 Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall Metre 162.00 391.41 63408.42
thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitered at
corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square
tube, the vertical door profiles to be reinforced with 19x19mm M.S. square tube of 19
gauge, EPDM rubber gasket weather seal to be provided through out the frame. The
door frame to be fixed to the wall using M.S. screws of 65/100mm size complete as
per manufacturers specification and direction of Engineer-in-Charge
31 078150 Providing and fixing to existing door frames 30mm thick factory made solid both side Sqm 59.00 3111.62 183585.58
prelaminated panel PVC door shutter consisting of frame made out of M.S. tubes of 19
gauge thickness and size of 19mm x 19mm for styles and15x15mm, top & bottom
rails. M.S. frame shall have a coat of steel primers of approved make and
manufacture. M.S. frame covered with 5mm thick heat moulded prelaminated PVC
Foam Sheet 'C channel as per drawing given in IR Standard Specifications complete
in all respect
32 078230 Providing and fixing of wall panelling on grid made of PVC profile section of size 21mm Sqm 100.00 965.24 96524.00
x 17mm x 1.5 mm filled with UPVC profile section of size 150mm x 10mm x 1.0mm.
The edge and periphery covered by extruded PVC beeding of section 28mm x 12mm
x 1.0mm complete job including fixing with screws, dash fasteners and other
accessories as required
Providing & fixing in position concealed GI section for wall panelling using Board of
required thickness, fixed on the 'W' profile (0.55mm thick) having a knurled web of
51.55mm and two flanges of 26mm each with lips of 10.55mm placed at 610mm c/c in
perimeter channel, having one flange of 20mm and another flange of 30mm with
thickness of 0.55mm and web of length 27mm. Perimeter channel is fixed on the floor
and the ceiling with nylon sleeves at 610mm c/c with fully threaded self-tapping dry
wall screws. Board is fixed to 'W' profile with 25mm countersunk ribbed head-screws
at 200mm c/c, all complete as per drawing & directions of engineer-in-charge. Joints
of boards are finished with specially formulated jointing compound and 48mm wide
jointing tape to provide seamless finish
33 078341 8mm thick non-asbestos multipurpose cement board, reinforced with cellulose fibre Sqm 146.00 687.19 100329.74
manufactured through auto-claving process (high pressure steam-cured) as per
IS:14862 with suitable fibre cement screw
Total 1144766.87
Item- 8 CH.8 Steel & Aluminium Work
S No. Item No Description of Item Unit Qty Rate Amount
Structural steel work in single section including cutting, bending, straightening, drilling,
rivetting, bolting, hoisting, fixing in position, including applying a priming coat of
approved steel primer, complete - upto 6m height above GL
1 081011 In RSJ, tees, angles and channels Kg 1000.00 50.84 50840.00
Structural steel work welded in built up sections, trusses and framed work, girders,
stagings, racks, etc including cutting, bending, straightening, hoisting, fixing in
position, including applying a priming coat of approved steel primer, complete - upto
6m height above GL
2 081031 In RSJ, tees, angles and channels Kg 3500.00 75.92 265720.00
3 081032 In flats, plates , round or square bars Kg 1600.00 73.26 117216.00
Extra for every subsequent 3m height or part thereof over 6m height above GL for
erection and fixing of steel work :
4 081043 Over item no 081032 Kg 1600.00 7.53 12048.00

Pa g e 6 o f 2 0 Ru n Da te Time: 18 /10 /2 0 17 12 :5 1:0 6


FEROZPUR DIVISION-ENGINEERING/NORTHERN RLY
TENDER DOCUMENT
Tender No: 216-2017-18-DRM-FZR-ASR Closing Date/Time: 27/11/2017 15:00

5 081180 Providing and fixing in position collapsible steel shutters with vertical channels Sqm 13.20 2481.85 32760.42
20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rail
of T-iron 40x40x6mm with 40mm dia, steel pulleys complete with bolts, nuts, locking
arrangement, stoppers, handles and hold fasts including applying a priming coat of
approved steel primer
Providing and fixing 1mm thick M.S. sheet door shutter with frame of 40x40x6mm
angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary
fittings complete, including applying a priming coat of approved steel primer
6 081201 Using M.S. angles 40x40x6mm for diagonal braces Sqm 2.10 1803.72 3787.81
Steel work in built up tubular trusses including cutting, hoisting, fixing in position and
applying a priming coat of approved steel primer, welded and bolted including special
shaped washers etc. complete
7 081293 Electric resistance or induction butt welded tubes Kg 11475.83 116.18 1333261.93
8 081350 Providing and fixing circular/ hexagonal M.S. sheet ceiling fan box with clamps of Each 63.00 98.03 6175.89
internal dia 140mm, 73mm height, 3mm thick rim, top and bottom lid of 1.5mm M.S.
sheet. Lids shall be screws into M.S. box by means of 3mm round beaded screws,
clamps shall be made of 12mm dia M.S. bar bent to shape as per standard drawing
with over all length as 80cm. (it includes cost of clamps also)
9 081390 6mm welding by gas plant including transportation of gas welding plant at site etc. cm 605.00 9.41 5693.05
complete
10 081400 6mm welding by electric plant including transportation of electric welding plant at site cm 515.00 8.25 4248.75
etc. complete
Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in
position and applying a priming coat of approved steel primer using structural steel
etc. as required
11 081412 In gratings, frames, guard bar, ladders, railings, brackets, gates and similar works Kg 1500.00 75.57 113355.00
Providing and fixing hand rail by welding etc. to steel ladders railing, balcony railing
and staircase railing including applying a priming coat of approved steel primer
12 081422 E.R.W. tubes 40mm nominal dia. Kg 453.81 126.16 57252.67
13 081423 G.I. pipes 40mm nominal bore (class B) Kg 400.00 107.57 43028.00
Providing and fixing anodised aluminium work for doors, windows, ventilators and
partitions with extruded built up standard tubular and other sections of approved make
conforming to IS:733 and IS:1285, anodised transparent or dyed to required shade
according to IS:1868 (Minimum anodic coating of grade AC 15), fixed with rawl plugs
and screws or with fixing clips, or with expansion hold fasteners including necessary
filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt
etc. Aluminium sections shall be smooth, rust free, straight, mitered and jointed
mechanically wherever required including cleat angle. Aluminium snap beading for
glazing/ panelling, C.P. brass/stainless steel screws, all complete as per architectural
drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid
for separately)
14 082011 For fixed portion Kg 191.00 305.87 58421.17
15 082012 For openable/sliding portions and fixing hinges / pivots, PVC/ neoprene gasket Kg 123.00 317.67 39073.41
required and making provision for fixing of fittings. (Fittings shall be paid for
separately)
Providing and fixing glazing in aluminium door, window, ventilator shutters and
partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural
drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading
shall be paid in basic item)
16 082032 With float/frosted glass panes of 5.5mm thickness (weight not less than 13.75 Sqm 76.44 804.86 61523.50
kg/sqm)
Providing and fixing double action hydraulic floor spring of approved brand and
manufacture IS:6315 including cost of cutting floors as required, embedding in floors
and cover plates with brass pivot and single piece M.S. Sheet outer box with slide
plate etc. complete as per the direction of Engineer-incharge
17 082041 With Stainless Steel cover plate Each 18.00 2106.73 37921.14
18 082080 Aluminium Composite Cladding - Providing and fixing Aluminium Composite Panels Sqm 1650.00 1964.25 3241012.50
having total thickness of 4mm (with 0.5mm thick aluminium foil skin on both sides)
alongwith minimum 25 micron PVdF Coating on top coil and Polymer/epoxy coating on
Back coil (4-7 microns) fixed on aluminium substructure of 50mm x 25mm x 3mm or
38mm x 38mm x 4mm (IS Grade Aluminium Extrusion) with stainless steel fastening
system of Hilti/Fischer Dash Fasteners on facade, horizontal / vertical surfaces of
columns, suspended ceiling, sills, jambs, canopies etc. and making 25mm grooves
and applying non staining and non streaking sealant 789 or 991 HP with Baker Rod
complete as per approved shop drawings and as per specifications (straight and
curved). Only exposed surfaces to be measured and paid.
19 082081 Extra for using 5mm thick aluminium composite panel (with 0.5mm thick aluminium foil Sqm 1650.00 121.96 201234.00
skin on both sides) in lieu of 4mm Aluminium composite panel (only thickness of core
to be 4mm in lieu of 3mm in item 082080 above)
20 083020 Providing and fixing Aluminium round/ square bars / flats or grill in frame of windows Sqm 64.00 500.58 32037.12
and cleastory windows
Total 5716610.36
Item- 9 CH.9 Flooring, Paving & Dado
S No. Item No Description of Item Unit Qty Rate Amount

Pa g e 7 o f 2 0 Ru n Da te Time: 18 /10 /2 0 17 12 :5 1:0 6


FEROZPUR DIVISION-ENGINEERING/NORTHERN RLY
TENDER DOCUMENT
Tender No: 216-2017-18-DRM-FZR-ASR Closing Date/Time: 27/11/2017 15:00

Providing and laying plain cement concrete flooring of specified thickness with mix
design concrete over firm, well prepared and well compacted bed including provision
of designed expansion joint & finishing manually or mechanical trowel ling & vacuum
dewatering complete. Expansion joint to be paid for separately.
1 092063 M-30 cum 2500.00 2601.25 6503125.00
Providing and fixing Ist quality ceramic tiles conforming to Group B-III (Ceramic Wall
Tiles) of IS:15622 of manufacturers approved by railway in all colours, shades, and
design as approved by the Engineer-in-Charge in skirting, risers of steps and dado
over 12mm thick bed of cement mortar 1:3 (1cement: 3coarse sand) including
pointing in white cement mixed with pigment of matching shade complete
2 095013 300x450 mm and above Sqm 587.00 646.97 379771.39
Providing and fixing ceramic tiles conforming to IS:15622 of manufacturers approved
by railway in all colours, shades, design and abrasion resistance class as approved
by the Engineer-in-Charge in floors and landings over 20mm thick bed of cement
mortar 1:4 (1cement: 3coarse sand) including pointing in white cement mixed with
pigment of matching shade complete
3 095022 Of Group B-II Clause 5.1 (for abrasion resistance) of IS:15622 (Ceramic Floor Tiles) Sqm 250.00 498.32 124580.00
of size 400x400mm and above
4 095026 Of Group B-I-a of IS : 15622 (Vitrified tiles) of size above 400x400mm upto 600x600 Sqm 1388.00 932.87 1294823.56
mm
5 095027 Of Group B-I-a of IS : 15622 (Vitrified tiles) of size 800x800mm and above Sqm 64.00 1051.92 67322.88
6 095030 Extra over items 095025 and 095026, if adhesive (recommended by manufacturer of Sqm 1452.00 40.15 58297.80
tiles) of specified thickness is used instead of cement mortar
7 095040 Extra over basic items for using rectified tiles when specifically ordered Sqm 1452.24 47.62 69155.67
Marble stone flooring with 18mm thick marble stone (sample of marble shall be
approved by the Engineer-in-Charge) over 20mm (average) thick base of cement
mortar 1:4 (1cement: 4coarse sand) laid and jointed with grey/white cement slurry,
including pigment if required, including rubbing and polishing complete with :
8 096013 Agaria White Sqm 125.00 1785.34 223167.50
9 096020 Extra for nosing in marble stone for treads, sills etc. Sqm 80.00 115.32 9225.60
Extra for making grooves up to 5 mm deep in marble stone for tread, sills etc. of width
10 096031 3mm to below 6 mm Sqm 125.00 66.96 8370.00
11 096040 Extra for marble stone flooring in treads of steps, not exceeding 30cm in width Sqm 125.00 137.49 17186.25
Kota stone slab flooring of size up to 60x60cm over 20mm (average) thick base of 1:4
cement mortar (1cement: 4coarse sand) and jointed with grey cement slurry mixed
with pigment to match the shade of the slab including rubbing and polishing complete
12 096072 25mm thick Sqm 925.00 912.94 844469.50
13 096080 Kota stone slabs 25mm thick in risers of steps, skirting, dado and pillars laid on 12mm Sqm 58.00 655.12 37996.96
(average) thick cement mortar 1:3 (1cement: 3coarse sand) and jointed with grey
cement slurry mixed with pigment to match the shade of the slab, including rubbing
and polishing complete :
14 096090 Extra for nosing in steps and treads of kota stone slab. Sqm 70.00 115.32 8072.40
Extra for making grooves up to 5 mm deep in Kota stone for tread, sills etc. of width
15 096101 3mm to below 6 mm Sqm 51.00 64.21 3274.71
16 096110 Extra for kota stone flooring in steps and treads not exceeding 30cm in width Sqm 61.00 135.23 8249.03
Supplying and laying interlocking pre-cast CC block pavers of approved design
factory manufactured of specified grade cement concrete on passenger platform, foot
paths, circulating area etc. including setting in position over 25mm thick bedding layer
of fine sand, filling the joints with fine sand, leveling including compaction as per
IS:15658
17 098021 60 mm thick blocks of M30 grade for light traffic Sqm 3000.00 480.98 1442940.00
18 098022 80mm thick blocks of M35 grade for medium traffic Sqm 200.00 606.21 121242.00
19 098023 120mm thick blocks of M40 grade for heavy traffic Sqm 200.00 968.28 193656.00
20 098040 Extra over items for lacquer finish Sqm 400.00 68.06 27224.00
21 098050 Extra over Item 098010 for addition of pigment in concrete of paver blocks Sqm 400.00 25.04 10016.00
Extra for providing edge moulding to 16mm to 20mm thick marble/granite stone
counters, vanities etc including machine polishing to edge to give high gloss finish etc.
complete as per design approved by the Engineer-in-Charge
22 099062 Granite work Metre 210.00 133.46 28026.60
Polished stone tile work for wall lining (dado) over 12mm thick bed of cement mortar
1:3, including pointing in white cement with an admixture of pigment to match the stone
shade with tiles of all size upto 300 x 300 mm
23 099081 8 mm thick pink/grey granite tiles Sqm 100.00 1356.26 135626.00
24 099082 8mm thick superior quality black granite tiles Sqm 20.00 1351.62 27032.40
25 099083 8mm thick superior quality (RUBY Red) granite tiles Sqm 550.00 1230.82 676951.00
26 099090 Extra for fixing marble/granite stone over facia and drops of width upto 150mm with Metre 100.00 108.70 10870.00
epoxy resin based adhesive (Araldite or equivalent) including cleaning etc. complete

Pa g e 8 o f 2 0 Ru n Da te Time: 18 /10 /2 0 17 12 :5 1:0 6


FEROZPUR DIVISION-ENGINEERING/NORTHERN RLY
TENDER DOCUMENT
Tender No: 216-2017-18-DRM-FZR-ASR Closing Date/Time: 27/11/2017 15:00

Extra for providing opening of required size and shape for wash basins/ kitchen sink /
Pillar tap etc in kitchen platform, vanity counters and similar location in marble / stone
work. including rubbing and polishing of cut edges etc complete. No deduction for
opening area shall be made from parent item
27 099101 Each 1.00 89.78 89.78
Opening of area upto 100 sq cm
Opening
28 099102 Each 1.00 278.70 278.70
Opening of area above 100 sq cm
Opening
29 099150 Extra for provision of motif tiles on walls over item 095010 Sqm 10.00 249.08 2490.80
Total 12333531.53
Item- 10 CH.10 Roofs & Ceiling
S No. Item No Description of Item Unit Qty Rate Amount
10cm thick (average) mud phaska of damped brick earth on roofs laid to slope
consolidated and plastered with 25mm thick mud mortar with bhusa at 35 kg per cum.
of earth and gobri leaping with mix 1:1 (1clay: 1cow dung) and covered with tile bricks
grouted with cement mortar 1:3 (1cement: 3fine sand) mixed with 2% of integral water
proofing compound by weight of cement and finished neat - upto floor two level
1 104011 With F.P.S. flat brick tiles of class designation 10 Sqm 2000.00 237.92 475840.00
2 104020 Extra over Items 104012 above floor two level for every floor or part thereof Sqm 400.00 47.58 19032.00
3 104030 Extra for every additional 1cm thickness of mud phaska Sqm 2000.00 7.36 14720.00
4 104130 Providing gola 75x75mm in cement concrete 1:2:4 (1cement: 2coarse sand: 4graded Metre 262.00 54.98 14404.76
stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3
(1cement: 3fine sand) as per standard design -in 75x75mm deep chase
5 104140 Making khurras 45x45cm with average minimum thickness of 5cm cement concrete Each 26.00 96.00 2496.00
1:2:4 (1cement: 2coarse sand: 4graded stone aggregate of 20mm nominal size) over
P.V.C. sheet 1mx1mx400micron, finished with 12mm cement plaster 1:3 (1cement:
3coarse sand) and a coat of neat cement rounding the edges and making and
finishing the outlet complete
6 105030 Painting top of roofs with residual type petroleum bitumen of penetration 80/100 of Sqm 2000.24 135.01 270052.40
approved quality at 17kg per 10 sqm impregnated with a coat of coarse sand at 60
cudm. Per 10sqm. including cleaning the slab surface with brushes and finally with a
piece of cloth lightly soaked in kerosene oil complete
7 105070 Providing and laying six courses water proofing treatment with bitumen felt over roofs Sqm 1000.00 595.70 595700.00
consisting of first, third and fifth courses of blown or/ and residual bitumen applied hot
at 1.45, 1.20 and 1.70kg/sqm of area respectively, second and fourth courses of
roofing felt type 2 grade II (glass fibre base self finished bitumen felt) and sixth and
final course of stone grit 6mm and down size or pea-sized gravel spread at
6cudm/sqm including preparation of surface but excluding grading, complete
8 106100 Providing and fixing at all height false ceiling of 12.5mm thick tapered edge gypsum Sqm 3000.00 561.22 1683660.00
board conforming to IS: 2095-Part I, including providing and fixing of frame work made
of special sections power pressed from M.S. sheet and galvanised with zinc coating
of grade 350 as per IS: 277 and consisting of angle cleats of size 25mm x 1.6mm with
flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling
with stener 12.5mm dia x 40mm long with 6mm dia bolts to the angle hangers of
25x25x0.55mm of required length and other end of angle hanger being fixed with nut
and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to
centre to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered
flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be
fixed in a direction perpendicular to G.I. channel with connecting clips made out of
2.64mm dia x 230mm long G.I. wire at every junction including fixing the gypsum
board with ceiling section and perimeter channels 0.5mm thick 27mm high having
flanges of 20mm and 30mm long, - the perimeter of ceiling fixed to wall/ partition with
the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @
230mm interval including jointing and fixing to a flush finish of tapered and square
edges of the gypsum board with recommended filler, paper tapes, finisher and two
coats of primer suitable for gypsum board as per manufacturers specification and
also including the cost of making openings for light fittings, grills, diffusers, cutouts
made with frame of perimeter channels suitably fixed all complete as per drawing and
specification and direction of the Engineer-in-Charge but excluding the cost of
painting.
9 106120 Extra for any sunk or raised Moulding in the Plaster of Paris (gypsum anhydrous) Sqm 800.00 169.83 135864.00
ceiling
Thermal Insulation of roofing with Expanded polystyrene fixed with suitable adhesive
to the false ceiling as per the directions of the Engineer-in-Charge
10 106182 With Type SE- Self Extinguishing type, 50mm thick Sqm 3000.00 202.04 606120.00
Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. rain
water pipes embedded in and including cement concrete blocks 10x10x10cm of 1:2:4
mix (1cement: 2coarse sand: 4graded stone aggregate 20mm nominal size) and cost
of cutting holes and making good the walls etc.
11 108022 100mm dia. Each 48.00 123.16 5911.68
12 108023 150mm dia. Each 65.00 76.26 4956.90
Providing, erecting and fixing on wall face S.C.I rain water pipes including filling of
joints with spun yarn soaked in neat cement slurry and cement mortar 1:2 (1cement:
2fine sand)

Pa g e 9 o f 2 0 Ru n Da te Time: 18 /10 /2 0 17 12 :5 1:0 6


FEROZPUR DIVISION-ENGINEERING/NORTHERN RLY
TENDER DOCUMENT
Tender No: 216-2017-18-DRM-FZR-ASR Closing Date/Time: 27/11/2017 15:00

13 108032 100mm dia. Metre 96.00 562.66 54015.36


14 108033 150mm dia. Metre 130.00 1078.99 140268.70
Providing erecting and fixing in position on wall face C.I accessories for rain water
pipes including filling the joints with spun yarn soaked in neat cement slurry and
cement mortar 1:2 (1cement: 2fine sand)
15 108062 100mm dia. CI Plain Bend Each 8.00 180.26 1442.08
16 108063 150mm dia. CI Plain Bend Each 20.00 264.07 5281.40
CI Branches (Plain)
17 108093 100mm dia. single branch Each 6.00 528.13 3168.78
18 108094 100mm dia. double branch Each 12.00 470.64 5647.68
CI Offset (Plain)
19 108105 100mm dia, 150mm projection Each 12.00 412.56 4950.72
C.I Slotted Vent cowl
20 108112 100mm dia. Each 8.00 238.34 1906.72
21 108113 150mm dia. Each 20.00 415.06 8301.20
Providing, fixing & embedding sand cast iron plain bend in masonry/RCC surrounded
with 12mm thick cement mortar of same mix that of masonry (lead caulking will be
paid separately)
22 108122 100mm dia. Each 8.00 308.03 2464.24
23 108123 150mm dia. Each 20.00 646.67 12933.40
24 109080 Sealing of cracks in concrete roofs by making a V-shaped groove 8-10 mm wide and Metre 199.92 146.53 29294.28
3-5 mm deep; filling the groove with acrylic-styrene based copolymer waterproofing
compound in water by repeated application of the waterproofing compound; spreading
dry coarse sand when the last application of the sealing compound still wet; removing
the excess sand on the following day and letting the treatment dry up for at least a
day before any surface treatment on the roof
Total 4098432.30
Item- 11 CH.11 Finishing Masonry
S No. Item No Description of Item Unit Qty Rate Amount
12 mm cement plaster of mix -
1 111011 1:4 (1cement: 4 fine sand) Sqm 300.00 57.39 17217.00
12 mm cement plaster finished with a floating coat of neat cement of mix -
2 111072 1:4 (1cement: 4fine sand) Sqm 1055.00 68.05 71792.75
15mm cement plaster on rough side of single or half brick wall finished a floating coat
of neat cement of mix -
3 111082 1:4 (1cement: 4fine sand) Sqm 945.00 76.64 72424.80
Cement plaster to ceiling of mix -
4 111151 6 mm thick 1:3 (1cement: 3 fine sand) Sqm 910.00 49.15 44726.50
5 112040 Providing and applying plaster of Paris putty of 2mm average thickness over Sqm 526.00 62.28 32759.28
plastered surface to prepare the surface even and smooth complete
6 112060 Rough cast plaster upto 10m height above ground level with a mixture of sand and Sqm 631.00 163.07 102897.17
gravel or crushed stone from 6mm to 10mm nominal size dashed over and including
the fresh plaster in two layers, under layer 12mm ordinary cement plaster 1:4
(1cement: 4coarse sand) and top layer 10mm cement plaster 1:3 (1cement: 3fine
sand)
White washing with lime to give an even shade
7 115011 New work (three or more coats) Sqm 910.00 8.36 7607.60
8 115012 Extra for using zinc oxide 75 gm per kg of lime for final coat of white washing Sqm 910.00 4.67 4249.70
Colour washing such as green, blue or buff to give an even shade
9 115031 New work (two or more coats) with a base coat of white washing with lime Sqm 316.00 9.98 3153.68
Distempering with oil bound washable distemper of approved brand and manufacture
to give an even shade
10 115041 New work (two or more coats of distemper) over and including priming coat with Sqm 4000.00 52.08 208320.00
cement primer
11 115042 New work (two or more coats of distemper) over and including priming coat with Sqm 737.00 51.27 37785.99
distemper primer
12 115050 Distempering two or more coats on new work with 1st quality acrylic washable Sqm 1200.00 30.45 36540.00
distemper (ready mixed) of approved manufacturer and of required shade and colour
complete as per manufacturer's specification
13 115110 Finishing walls with water proofing cement paint of required shade two or more coats Sqm 1200.00 38.40 46080.00
on new work applied @ 3.84 Kg/10 sqm
14 115140 Finishing walls with textured exterior paint of required shade on new work (Two or Sqm 2500.00 109.85 274625.00
more coats applied @ 3.28 ltr/10 sqm) over and including base coat of water proofing
cement paint applied @ 2.20 kg/10sqm
Colour washing such as green, blue or buff to give an even shade
15 117071 Old work (two or more coats) with lime Sqm 499.50 6.59 3291.71
Total 963471.18

Pa g e 10 o f 2 0 Ru n Da te Time: 18 /10 /2 0 17 12 :5 1:0 6


FEROZPUR DIVISION-ENGINEERING/NORTHERN RLY
TENDER DOCUMENT
Tender No: 216-2017-18-DRM-FZR-ASR Closing Date/Time: 27/11/2017 15:00

Item- 12 CH.-12 Painting, Polishing & Varnishing


S No. Item No Description of Item Unit Qty Rate Amount
Applying Priming Coat :
1 121011 With ready mixed pink or grey primer of approved brand and manufacture on Sqm 1500.00 19.08 28620.00
woodwork (hard and soft wood)
2 121013 With ready mixed red oxide zinc chromate primer of approved brand and manufacture Sqm 300.00 14.97 4491.00
on steel galvanized iron/steel works
Painting with synthetic enamel paint of approved brand and manufacture to give an
even shade
3 121051 Two or more coats on new work Sqm 1800.00 40.81 73458.00
4 121170 Painting two coats (excluding priming coat) with white or green ready mixed paint of Sqm 795.50 38.79 30857.45
approved quality, on steel or wood work
Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with
black anticorrosive bitumastic paint approved brand and manufacture over and
including a priming of ready mixed zinc chromate yellow primer on new work
5 122012 100mm diameter pipes Metre 96.00 17.48 1678.08
6 122013 150mm diameter pipes Metre 130.00 25.58 3325.40
Painting, one coat , any shade as directed of approved make and brand a) Trusses
upto 9m clear span and b) Staging with O.H. tank where staging is upto 2.5m in height
7 123011 With Red Oxide metal primer as per IS:123 Sqm 100.00 13.37 1337.00
8 123014 With Aluminium paint as per IS:2339. Sqm 100.00 14.38 1438.00
9 123080 Painting human figures on latrine walls with Synthetic Enamel paint two coats, Each 2.00 32.17 64.34
including the background complete
Polishing on wood work with ready made wax polish of approved brand and
manufacture
10 124031 New work (two or more coats) Sqm 400.10 47.54 19020.75
11 125050 Supplying printing and fixing banner made of Flex Fibre Cloth with digital printing as Sqm 120.00 231.14 27736.80
per Railways approved matter, colour, pattern etc. complete job
Total 192026.82
Item- 13 CH.13 Water Supply
S No. Item No Description of Item Unit Qty Rate Amount
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting
and making good the walls etc. Internal work - Exposed on wall
1 131131 15 mm dia. nominal bore Metre 190.00 131.57 24998.30
2 131132 20 mm dia. nominal bore Metre 225.00 163.22 36724.50
3 131133 25 mm dia. nominal bore Metre 325.00 221.72 72059.00
4 131135 40 mm dia. nominal bore Metre 225.00 325.61 73262.25
5 131136 50 mm dia. nominal bore Metre 380.00 419.11 159261.80
Providing and fixing medium grade G.I. pipes complete with G.I. fittings and clamps,
including cutting and making good the wall etc. Concealed pipe including painting with
anti corrosive bitumestic paint, cutting chase and making good the wall
6 131141 15 mm dia. nominal bore Metre 400.00 170.10 68040.00
Providing and fixing PP-R Gate Valve fusion welded, having thermal stability for hot &
cold water supply and testing of joints complete as per direction of engineer in charge
7 131183 40 mm Gate Valve Each 6.00 730.58 4383.48
8 131184 50 mm Gate Valve Each 4.00 1067.42 4269.68
Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping
the main
9 132125 40 mm nominal bore Each 6.00 387.65 2325.90
10 132126 50 mm nominal bore Each 2.00 486.96 973.92
Providing and fixing unplasticised PVC connection pipe with brass unions: 45 cm
length
11 132141 15 mm nominal bore Each 66.00 54.85 3620.10
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :
12 132171 100mm diameter Each 26.00 470.01 12220.26
13 132180 Providing and fixing C.P. brass bib cock, 15mm nominal bore, of approved quality Each 48.00 353.73 16979.04
conforming to IS:8931
14 132190 Providing and fixing C.P. brass long nose bib cock, 15 mm nominal bore, of approved Each 52.00 413.09 21480.68
quality conforming to IS standards and weighing not less than 810 gms
15 132210 Providing and fixing C.P. brass stop cock, 15 mm nominal bore, (concealed) of Each 26.00 419.96 10918.96
standard design and of approved make conforming to IS:8931
16 132220 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of Each 66.00 535.68 35354.88
approved quality conforming to IS:8931
Providing and laying S&S C.I. standard specials such as tees, bends, collars, tapers,
caps etc. (Heavy class)
17 133031 Upto 300mm dia. Quintal 35.00 6505.14 227679.90

Pa g e 11 o f 2 0 Ru n Da te Time: 18 /10 /2 0 17 12 :5 1:0 6


FEROZPUR DIVISION-ENGINEERING/NORTHERN RLY
TENDER DOCUMENT
Tender No: 216-2017-18-DRM-FZR-ASR Closing Date/Time: 27/11/2017 15:00

Providing and laying flanged C.I. standard specials such as tees, bends, collars,
tapers, caps etc., suitable for flanged jointing as per IS:1538 :
18 133041 Upto 300 mm dia Quintal 40.00 5924.39 236975.60
Providing and laying Double Flanged (Screwed/Welded) Centrifugally (Spun) Ductile
Iron Pipes of Class K - 9 conforming to IS : 8329 up to 500 mm dia
19 133122 150mm dia Ductile Iron Double Flanged Metre 150.00 2926.16 438924.00
Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber
insertions etc. 150 mm dia (the tail pieces if required will be paid separately)
20 133222 Class II Each 4.00 5849.41 23397.64
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and
making long screws etc. complete (new work)
21 136131 15mm nominal bore Each 12.00 94.34 1132.08
22 136133 25mm nominal bore Each 9.00 155.94 1403.46
23 136134 32mm nominal bore Each 10.00 193.06 1930.60
24 136135 40mm nominal bore Each 6.00 246.77 1480.62
25 136136 50mm nominal bore Each 4.00 318.51 1274.04
26 136150 Providing and placing on terrace/staging (at all heights) polyethylene water storage Litre 10000.00 6.43 64300.00
tank ISI : 12701 marked with cover and suitable locking arrangement and making
necessary holes for inlet, outlet and overflow pipes but without fittings and the base
support for tank
Total 1545370.69
Item- 14 CH.14 Drainage and Sewerage
S No. Item No Description of Item Unit Qty Rate Amount
Providing, laying and jointing glazed stoneware pipes grade 'A' as per IS:651 including
bends etc. with stiff mixture of cement mortar in the proportion of 1:1 (1cement : 1fine
sand) including testing of joints etc. complete
1 141012 150mm diameter Metre 200.00 245.52 49104.00
2 141013 200mm diameter Metre 149.98 371.59 55731.07
Providing and laying cement concrete 1:4:8 (1cement: 4coarse sand: 8graded stone
aggregate 40mm nominal size) all round S.W. pipes including bed concrete as per
standard design
3 141032 150mm diameter S.W. pipe Metre 200.00 317.07 63414.00
4 141033 200mm diameter S.W. pipe Metre 150.00 369.62 55443.00
Providing and fixing square-mouth S.W. gully trap grade 'A' complete with C.I. grating
brick masonry chamber with water tight C.I. cover with frame of 300x300mm size
(inside) the weight of cover to be not less than 4.50kg and frame to be not less than
2.70kg as per standard design
5 141053 150x100mm size P type With F.P.S. bricks class designation 75 Each 32.00 1285.89 41148.48
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes including
bends etc with collars jointed with stiff mixture of cement mortar in the proportion of
1:2 (1cement: 2fine sand) including testing of joints etc. complete upto 800mm dia.
6 142014 300mm dia. R.C.C. pipe Metre 1690.00 721.21 1218844.90
7 142015 450mm dia. R.C.C. pipe Metre 700.00 818.21 572747.00
Constructing brick masonry manhole in cement mortar 1:4 (1cement: 4coarse sand)
R.C.C. top slab with 1:2:4 (1cement: 2coarse sand: 4graded stone aggregate 20mm
nominal size), foundation concrete 1:4:8 mix (1cement: 4coarse sand: 8graded stone
aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3
(1cement: 3coarse sand) finished with floating coat of neat cement and making
channels in cement concrete 1:2:4 (1cement: 2coarse sand: 4graded stone
aggregate 20mm nominal size) finished with a floating coat of neat cement complete
as per standard design
8 143011 Inside size 90x80cm and 45cm deep including C.I. cover with frame (light duty) Each 16.00 4268.00 68288.00
455x610mm internal dimensions total weight of cover and frame to be not less than
38kg (weight of cover 23kg and weight of frame 15kg). With F.P.S. bricks class
designation 7.5
9 143012 Inside size 90x80cm and 45cm deep including C.I. cover with frame (light duty) Each 8.00 4436.92 35495.36
455x610mm internal dimensions total weight of cover and frame to be not less than
38kg (weight of cover 23kg and weight of frame 15kg)With Sewer bricks confirming to
IS:4885
Supplying and fixing C.I. cover without frame for manholes
10 143131 455x610mm rectangular C.I. cover (light duty) the weight of the cover to be not less Each 16.00 1124.61 17993.76
than 23kg
11 143133 560mm diameter C.I. cover (heavy duty) the weight of cover to be not less than Each 8.00 4667.19 37337.52
108kg
Providing and fixing in position precast R.C.C. manhole cover and frame of required
shape and approved quality. (As per IS 12592-1991)
12 143145 MD- 10 circular shape 500mm internal diameter Each 8.00 1361.11 10888.88
13 143146 HD- 20 circular shape 560mm internal diameter Each 10.00 1829.93 18299.30

Pa g e 12 o f 2 0 Ru n Da te Time: 18 /10 /2 0 17 12 :5 1:0 6


FEROZPUR DIVISION-ENGINEERING/NORTHERN RLY
TENDER DOCUMENT
Tender No: 216-2017-18-DRM-FZR-ASR Closing Date/Time: 27/11/2017 15:00

Supplying, fitting & fixing in position reinforced cement polymer concrete (R.C.P.C.)
manhole cover and frame to match with IS : 12592 with cement conc. 1:2:4 for
embedding the manhole cover frame
14 143151 a) 3 MT load bearing capacity manhole cover provided with 2 nos. lifter lock fitted with Each 5.00 725.08 3625.40
matching frame (Size of cover : 440 mm dia. x 50 mm thick and size of frame : 530
mm dia. x 100 mm thick)
15 143152 b) 12 MT load bearing capacity manhole cover provided with 2 nos. lifter lock fitted Each 32.00 862.47 27599.04
with matching frame (Size of cover : 590 mm dia. x 75 mm thick and size of frame :
750 mm dia. x 150 mm thick)
Making connection of drain or sewer line with existing manhole including breaking into
and making good the walls, floors with cement concrete 1:2:4 mix (1cement: 2coarse
sand: 4graded stone aggregate 20mm nominal size) cement plastered on both sides
with cement mortar 1:3 (1cement: 3coarse sand) finished with a floating coat of neat
cement and making necessary channels for the drain etc. complete
16 143171 For pipes 100 to 230mm diameter Each 6.00 152.49 914.94
Total 2276874.65
Item- 15 CH.15 Sanitary Installations
S No. Item No Description of Item Unit Qty Rate Amount
Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm
sand cast iron P or S trap, 10litre low level white P.V.C. flushing cistern with manually
controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures
complete including cutting and making good the walls and floors wherever required
1 151011 White Vitreous China Orissa pattern W.C. pan of size 580x440-mm with integral type Each 4.00 3057.59 12230.36
foot rests
Providing and fixing white vitreous china pedestal type water closet (European type
W.C. pan) with seat and lid, 10litre low level white, P.V.C. flushing cistern with
manually controlled device (handle lever) conforming to IS: 7231, with all fittings and
fixtures complete including cutting and making good the walls and floors wherever
required
2 151022 W.C. pan with ISI marked black solid plastic seat and lid Each 24.00 2798.58 67165.92
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal
basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic
flushing cistern , with standard flush pipe and C.P. brass spreaders with brass unions
and G.I. clamps complete, including painting of fittings and brackets, cutting and
making good the walls and floors wherever required
3 151041 One urinal basin with 5litre white P.V.C. automatic flushing cistern Each 21.00 2377.03 49917.63
4 151043 Range of three urinal basins with 10litre white P.V.C. automatic flushing cistern Each 7.00 6215.23 43506.61
Providing and fixing white, vitreous china flat back half stall urinal of 580x380x350mm
with white P.V.C. automatic flushing cistern, with fittings, standard size C.P. brass
flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as
per IS: 2556, C.I. trap with outlet grating and other coupling in C.P. brass including
painting of fittings and cutting and making good the walls and floors wherever required
5 151051 Single half stall urinal with 5litre P.V.C. automatic flushing cistern Each 3.00 3798.11 11394.33
Providing and fixing one piece construction white vitreous china squatting plate with
an integral longitudinal flushing pipe, white, P.V.C. automatic flushing cistern, with
fittings, standard size G.I. flush pipe for back and front flush with standard spreader
pipes with fittings, G.I. clamps and C.P. brass coupling complete including painting of
fittings and cutting and making good the walls and floors etc. wherever required
6 151061 Single squatting plate of 600x350 mm size with 5 litre P.V.C. automatic flushing cistern Each 3.00 3580.90 10742.70
7 151100 Supplying and fixing white vitreous china circular wash basin category No. 1004 Each 21.00 1546.58 32478.18
group I, size 470 mm. dia with CP brass pillar tap, 32 mm. rubber plug and CP brass
chain, 32 mm. CP brass waste of standard pattern connected with GI waste pipe upto
floor level and 32 mm. dia CP brass trap and unions complete including cutting and
making good the walls etc. as a complete job
Providing and fixing Stainless Steel AISI- 304 (18/8) kitchen sink with drain board as
per IS: 13983 with C.I. brackets and stainless steel plug 40mm including painting of
fittings and brackets, cutting and making good the walls wherever required
8 152022 510x1040 mm bowl depth 225mm Each 1.00 4300.81 4300.81
Providing and fixing mirror of 5.5 mm thickness of float Glass (of approved Quality)
required shape and size with plastic moulded frame of approved make and shade with
6mm thick hard board backing
9 152124 Rectangular shape 1500x450 (outer dimension) Each 16.00 1750.45 28007.20
Providing and fixing toilet paper holder
10 152141 C.P. brass Each 28.00 245.78 6881.84
Providing and fixing soil, waste and vent pipes
11 153012 100mm dia. Centrifugally cast (spun) iron S&S pipe as per IS:3989 Metre 100.00 599.73 59973.00
Providing and fixing bend of required degree with access door, insertion rubber
washer 3mm thick, bolts and nuts complete
12 153041 100mm dia. Sand cast iron S&S as per IS-1729 Each 10.00 542.07 5420.70
Providing and fixing plain bend of required degree
13 153051 100mm dia. Sand cast iron S&S as per IS-1729 Each 12.00 263.31 3159.72

Pa g e 13 o f 2 0 Ru n Da te Time: 18 /10 /2 0 17 12 :5 1:0 6


FEROZPUR DIVISION-ENGINEERING/NORTHERN RLY
TENDER DOCUMENT
Tender No: 216-2017-18-DRM-FZR-ASR Closing Date/Time: 27/11/2017 15:00

Providing and fixing Sand cast iron S&S off sets as per IS-3989
14 153202 150mm off sets with 75mm dia pipe Each 10.00 764.34 7643.40
15 153203 150 mm off sets with 100mm dia pipe Each 6.00 764.34 4586.04
Providing and fixing door piece, insertion rubber washer 3mm thick, bolts and nuts
complete
16 153211 100mm Sand cast iron S&S as per IS-1729 Each 20.00 1169.28 23385.60
Supplying, fitting and fixing cowls to vent pipes :
17 153231 Wire cowls for pipes of size 50/75 mm dia. Each 10.00 100.47 1004.70
18 153232 Wire cowls for pipes of size 100/150 mm dia. Each 6.00 117.89 707.34
Providing lead caulked joints to sand cast iron/ centrifugally cast (spun) iron pipes and
fittings of diameter
19 153251 100mm Each 12.00 205.78 2469.36
Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast
(spun) iron pipes of diameter
20 153261 100mm Each 20.00 77.47 1549.40
21 153300 Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and Each 16.00 185.84 2973.44
112mm distance from wall of standard shape with bracket of the same materials/ with
snap fittings of approved quality colour and make, weighing not less than 105gms
22 153310 Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm width Each 16.00 236.95 3791.20
with a minimum distance of 37mm from wall face with concealed fittings arrangement
of approved quality, colour and make weighing not less than 90gms
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats
with C.P. brass screws with concealed fitting arrangement of approved quality colour
and make
23 153322 600mm long towel rail with total length of 645mm, width 78mm and effective height of Each 16.00 461.26 7380.16
88mm, weighing not less than 190gms
24 153330 Providing and fixing PTMT shelf 440mm long, 124mm width and 36mm height of Each 16.00 501.91 8030.56
approved quality, colour and make weighing not less than 300gms
Providing and fixing C P brass grating with openable lid :
25 153471 Grating 100 mm nominal dia. and 12 mm. high domed shape having wt. not less than Each 48.00 81.70 3921.60
25 gms
26 154010 Providing and fixing 110mm dia PVC soil, waste and vent pipes including jointing and Metre 118.37 205.50 24325.04
cost of spun yarn and sand etc. complete
27 154110 Providing and fixing 110 mm PVC bend of the required degree with access door Each 12.00 89.16 1069.92
inclusive of 3mm thick bitumastic felt washer, bolts and nuts, complete, including
jointing and cost of spun yarn and sand etc. complete
28 154120 Providing and fixing 110mm dia PVC terminal guard including jointing and cost of spun Each 10.00 195.13 1951.30
yarn and sand etc, complete
29 154130 Providing and fixing 110 mm PVC collar (loose socket) including jointing and cost of Each 15.00 73.17 1097.55
spun yarn and sand etc. complete
30 155220 Providing and fixing Glass Shelf of approved make or equivalent of size 550 mm x Each 16.00 620.82 9933.12
130 mm x 5.5 mm thick (rounded end) with C.P. brass brackets & guard rails having
approx. wt.2.4 kg
31 155230 Supplying fitting and fixing soap tray of size150x150mm vitreous (concealed type) Each 32.00 306.35 9803.20
with all necessary fittings etc. completed as directed by the Engineer-incharge
32 155240 Supplying and fixing approved quality chromium plated shirt hooks (One unit of 4 Each 28.00 67.82 1898.96
hooks) with all necessary fittings etc. complete and as directed by the Engineer-in-
charge
33 155250 P&F 127mm dia C.P. steel Jali cockroach trap (CCTR-127) for gully floor or Nahani Each 60.00 187.87 11272.20
trap
Total 463973.09
Item- 16 CH.16 Horticulture & Landscaping
S No. Item No Description of Item Unit Qty Rate Amount
Supplying & Grassing with grass in rows 7.5cm apart in either direction including
watering and maintenance of the lawn for 30 days or more till the grass forms a thick
lawn free from weeds and fit for mowing including supplying good earth if needed (the
good earth shall be paid for separately)
1 161111 Doob Grass 100 Sqm 1000.00 295.54 2955.40
Edging with bricks (Along Kiaris, lawns or hedges etc) laid dry including excavation,
refilling, consolidating with hand packing and spreading neatly, surplus earth within a
lead of 50metres
2 161203 7.5 class designation, F.P.S. bricks, laid in tooth edged pattern at an angle of 60 Metre 200.00 26.92 5384.00
degree with horizontal
Supplying of seasonal flower saplings / seedlings including all lead & lift, carriage,
handling etc.
3 161373 Nasturtium Each 200.00 7.04 1408.00
4 161374 Salvia Each 200.00 7.25 1450.00
5 161375 Balsam Each 200.00 7.11 1422.00
6 161376 Calendula Officinalis Each 200.00 7.18 1436.00

Pa g e 14 o f 2 0 Ru n Da te Time: 18 /10 /2 0 17 12 :5 1:0 6


FEROZPUR DIVISION-ENGINEERING/NORTHERN RLY
TENDER DOCUMENT
Tender No: 216-2017-18-DRM-FZR-ASR Closing Date/Time: 27/11/2017 15:00

7 161377 Poppy Each 200.00 7.14 1428.00


8 161378 Carnation Each 200.00 29.28 5856.00
9 161379 Carnation (hybrid) Each 200.00 40.90 8180.00
Total 29519.40
Item- 17 CH.17 Misc. Building Works
S No. Item No Description of Item Unit Qty Rate Amount
Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5Sq. metres and
under including cutting the patch in proper shape and preparing and plastering the
surface of the walls complete including disposal of rubbish to the dumping ground
within 100 metres Lead
1 171011 With cement mortar 1:4 (1cement: 4fine sand) Sqm 150.00 90.33 13549.50
2 171030 Making the opening for door/window /clerestory window in brick masonry including Sqm 36.50 220.22 8038.03
dismantling, fixing chowkhats, cutting masonry and making good the damages to
walls/flooring/jambs to match existing surface including disposal of malba to the
dumping ground within 50 metres Lead, complete
3 171100 Providing and fixing 16mm MS Fan clamps of standard shape and size in existing Each 30.00 123.05 3691.50
R.C.C. slab including cutting chase and making good with 1:2 C:S mortar and painting
(Two coats) exposed portion of the clamps complete
4 171230 Providing and laying integral cement based water proofing treatment incl. preparation Sqm 2000.00 477.23 954460.00
of surface on roofs, balconies, terraces etc. (i) Grouting a slurry coat of neat cement
@ 2.75kg/ sqm mixed with water proofing compound conforming to IS: 2645 inc. walls
upto 300mm height. (ii) Laying CC with brickbats 25 to 40mm with 50% of cement
mortar 1:5 (1 cement : 5 coarse sand) mixed with water proofing compound over
20mm thick layer of cement mortar of 1:5 mortar mixed with water proofing compound
to required slope, treating adjoining walls upto 300mm height, rounding of junctions.(iii)
Curing for 2 days & applying 2nd coat of cement slurry @ 2.75 kg/sqm mixed with
water proofing compound. (iv) Finishing surface with 20mm thick jointless cement
mortar of mix 1:4 (1 cement : 4 coarse sand) including laying of glass fibre cloth of
approved quality in top layer of plaster mixed with water proofing compound and
finishing surface with trowel with neat cement slurry and making pattern of
300x300mm square, 3mm deep with average thickness of 120mm and minimum
thickness at khurra as 65mm
5 171240 Supplying and applying bituminous solution primer on roof and or wall surface at Sqm 1944.63 36.12 70240.04
0.24litre per sqm
Grading / Regrading of roof for water proofing treatment with :
6 171261 Cement concrete 1:2:4 (1cement: 2coarse sand: 4graded stone aggregate 20mm cum 84.20 1961.45 165154.09
nominal size)
7 171262 Cement mortar 1:3 (1cement: 3coarse sand) cum 21.05 2773.30 58377.97
8 171300 Providing and fixing stainless steel kitchen rack of suitable size of approved make Kg 8.00 204.54 1636.32
Diluting and injecting chemical emulsion Chlorpyriphos/ Lindane E.C. 20% with 1%
concentration for post constructional anti-termite treatment (Payment for chemical
emulsion to be made separately)
9 171331 Along external wall where the apron is not provided using chemical emulsion @ 7.5 Metre 319.00 7.40 2360.60
litres/ Sqm of the vertical surface of the substructure to a depth of 300mm including
excavating channel along the wall and rodding etc. and making good the same
10 171332 Along the external wall below concrete or masonry apron using chemical emulsion @ Metre 200.00 11.23 2246.00
2.25 litres per linear metre including drilling & plugging holes etc.
11 171333 Treatment of soil under existing floors using chemical emulsion @ one litre per hole, Sqm 3200.00 54.06 172992.00
300mm apart including drilling 12mm diameter holes and plugging with cement mortar
1:2 (1cement: 2coarse sand) to match the existing floor
Drilling of bore well for specified depth in all types of soil and rock mechanically with all
contractor's tools, plants, material and labour up to 75 meters
12 171522 For 200 mm dia Metre 100.00 428.69 42869.00
13 171590 Supplying & fixing sun control film of approved quality and make over Sqm 200.00 194.56 38912.00
door/window/clery storey window
14 171690 Providing & applying Pre-Construction Anti-Termite treatment to proposed structure, Sqm 316.00 70.81 22375.96
with application of Imidacloprid 30.5% SC @ o.075% concentration mixed with water
i n ratio of 1:475, as per detailed specifications given in Indian Railways Standard
Specifications, so as to create a chemical barrier below and around the structure by
an approved agency. (Plinth Area/Basement floor area shall be considered for
Payment)
Total 1556903.01
Item- 18 CH.18 Dismantling & Demolishing
S No. Item No Description of Item Unit Qty Rate Amount
1 181010 Demolishing lime concrete and disposal of material within 50m lead cum 50.00 144.21 7210.50
Demolishing plain cement concrete including disposal of material within 50m lead
2 181021 1:2:4 or richer mix with max. 20 mm coarse aggregate cum 26.00 413.41 10748.66
3 181023 Dismantling concrete kerb stones/rail level platform stones /concrete beams / slabs cum 100.00 443.63 44363.00
or similar light structural parts/ stones without appreciable damage including stacking
4 181030 Demolishing R.C.C. work including cutting and stacking of steel bars and disposal of cum 10.00 603.12 6031.20
unserviceable material within 50m lead. (Extra payment for scraping, cleaning and
straightening of bars to be made separately)

Pa g e 15 o f 2 0 Ru n Da te Time: 18 /10 /2 0 17 12 :5 1:0 6


FEROZPUR DIVISION-ENGINEERING/NORTHERN RLY
TENDER DOCUMENT
Tender No: 216-2017-18-DRM-FZR-ASR Closing Date/Time: 27/11/2017 15:00

5 181060 Extra for scraping, cleaning, straightening reinforcement from R.C.C. or R.B. work Kg 998.00 1.58 1576.84
Demolishing brick work including stacking of serviceable material and disposal of
unserviceable material within 50m lead
6 182012 In lime mortar/ lime cinder mortar cum 35.00 144.21 5047.35
7 182013 In cement mortar cum 200.00 348.90 69780.00
Extra for removing mortar from bricks and cleaning bricks (stacks of cleaned bricks
shall be measured)
8 182022 From brick work in lime mortar/ lime cinder mortar 1000 Nos. 17360.00 898.73 15601.95
9 182023 From brick work in cement mortar 1000 Nos. 99200.00 1119.66 111070.27
10 183010 Dismantling cement concrete / terrazzo flooring and/or underlayer excluding base Sqm 300.00 14.43 4329.00
concrete
11 183020 Dismantling tile work in floors/dado/skirting laid in cement mortar/ chemical Sqm 225.00 18.56 4176.00
mortar/synthetic adhesive including stacking material within 50m lead
12 183040 Dismantling Paver block/ stone sett flooring laid in dry mortar/ cement mortar / Sqm 1150.00 36.38 41837.00
bitumen, including stacking material within 50m lead
Dismantling including stacking of serviceable material and disposal of unserviceable
material within 50m lead
13 183062 Bituminous top layer of road Sqm 5000.00 74.09 370450.00
14 184010 Demolishing brick tile covering (single layer) in terracing including stacking of Sqm 316.00 17.26 5454.16
serviceable material and disposal of unserviceable material within 50m lead
15 184020 Demolishing mud phaska in terracing and disposal of material within 50m lead cum 316.00 154.80 48916.80
16 184040 Dismantling jack arch roofing including lime/cement concrete in haunches and floors Sqm 632.00 43.31 27371.92
including cleaning and stacking of serviceable material and disposal of unserviceable
material within 50m lead - plan area to be measured
17 185010 Dismantling doors, windows and clerestory windows (steel or wood) shutter including Each 20.00 84.12 1682.40
chowkhats, architrave, holdfasts in CC or masonry etc. complete and stacking within
50m lead
Dismantling steel work in single sections including dismembering & stacking within
50m lead in
18 186012 Channels, angles, tees and flats/ rounds or any other rolled shape. Kg 2000.00 0.41 820.00
19 186020 Dismantling steel work and trusses upto 10m span and 5m height in built up sections Kg 3000.00 0.95 2850.00
in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting
rivets, welding etc. including dismembering and stacking within 50m lead
Dismantling G.I. /PVC pipes (external work) including excavation and refilling trenches
after taking out the pipes, including stacking of pipes within 50m lead
20 188021 Upto 40mm dia Metre 400.00 27.47 10988.00
Dismantling rain water pipe of G.I, C.I, M.S, SCI, asbestos or PVC with fittings and
clamps, including stacking the material within 50m lead
21 188032 Dia of above 80mm Metre 50.00 13.25 662.50
22 188040 Dismantling of flushing cistern of any size including stacking of serviceable materials Each 15.00 157.89 2368.35
and disposal of unserviceable materials within 50m lead
Dismantling of old S.W. pipes including breaking of joints and partial bed concrete
(Brick or stone) as required, stacking of useful material near the site within 50m lead
and disposal of unserviceable material into municipal / Railway dumps
23 189082 150mm diameter Metre 100.00 31.62 3162.00
Dismantling of manhole including R.C.C. top slab, C.I. cover with frame including
stacking of useful material including bricks duly cleaned from mortar near the site and
disposal of unserviceable materials into railway dumps within 50m lead including all
excavation, refilling watering and ramming etc. complete
24 189091 Rectangular manhole 90x80cm (Inside dimensions) and 45cm deep. Each 6.00 656.50 3939.00
Total 800436.90
Item- 19 CH.23 Roads & Platform Work
S No. Item No Description of Item Unit Qty Rate Amount
1 231020 Consolidation of subgrade with power road roller of 8 to 12 tonne capacity including Sqm 11000.00 1.19 13090.00
making good the undulations etc. with earth or quarry spoils etc. and re-rolling the
subgrade
Providing and laying water bound macadam with specified stone aggregate, stone
screening and binding material including screening, sorting, spreading to template and
consolidation with power road roller of 8 to 10 tonne capacity etc. complete.
2 231043 Base course with 53mm to 22.4mm size including stone screening 11.2mm size cum 59.48 1414.11 84111.26
Providing and applying tack coat using bitumen emulsion (Rapid setting) complying
with IS: 8887- 1995, spraying the bitumen emulsion with mechanically operated spray
unit, cleaning and preparing the existing road surface as per specification
3 233011 On W.B.M. @ 0.4kg/ sqm Sqm 500.00 20.72 10360.00
4 233012 On bituminous surface @ 0.25kg/ sqm Sqm 500.00 14.23 7115.00
4cm thick bitumastic sheet with hot bitumen of approved quality using stone chippings
(60% 12.5mm nominal size and 40% 10mm nominal size) 2.60cum and coarse sand
2.60cum of road surface and with 478kg bitumen per 100sqm of road surface over a
tack coat including consolidation with road roller of 8 to 10tonne etc. complete (tack
coat to be paid separately)

Pa g e 16 o f 2 0 Ru n Da te Time: 18 /10 /2 0 17 12 :5 1:0 6


FEROZPUR DIVISION-ENGINEERING/NORTHERN RLY
TENDER DOCUMENT
Tender No: 216-2017-18-DRM-FZR-ASR Closing Date/Time: 27/11/2017 15:00

5 234021 With paving bitumen 80/ 100 heated and then mixed with solvent at the rate of Sqm 1000.00 386.69 386690.00
70grams per kg. of asphalt
6 238050 Providing and applying 2.5mm thick road marking strips (retro-reflective) of specified Sqm 300.00 500.35 150105.00
shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic
paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank
heater and profile shoe heater, driven by experienced operator on road surface
including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil,
grease and foreign material etc. complete as per direction of Engineer-in-charge and
in accordance with applicable specifications
Total 651471.26
Schedule Schedule B-NS Items
Item- 1 NS Items
S No. Item No Description of Item Unit Qty Rate Amount
1 1 NS-1) Item rate for manufacturing supplying & fixing of Hindi, English & Punjabi cm 7500.00 17.40 130500.00
languages letters/word in size 2" wide 1" thick and 18" high hollow letters made out of
plain stainless steel of grade 304. The rates are also include the cost of
transportation, fixing material and tax etc. as per site requirement/ instructions of
engineer-in charge with all material, all height, all loading ,unloading ,leading all
incidental work etc. as a complete job. ( Qty. = 3000 inch X 2.5=7500 cm) Rate = 43.5
per Inch/2.5 cm.=17.40 per cm)
2 2 NS-2) Item rate for manufacturing supplying & fixing of Hindi, English &Punjabi cm 6250.00 31.32 195750.00
languages letters/word in size 3" wide 3"thick and 36"high hollow letters made out of
plain stainless steel of grade 304,complete as per instructions of engineer-in charge
The rates are also include the cost of transportation fixing material and tax etc. as per
site requirement with all material, all height, all loading ,unloading ,leading all incidental
work etc. as a complete job. ( Qty. = 2500 inch X 2.5=6250 cm) Rate = 78.31 per
Inch/2.5 cm.=31.32 per cm)
3 3 NS-3) Fabricating, supplying & fixing in position all types of steel benches, water Kg 10050.00 428.63 4307731.50
booths, stainless steel railing etc. to stairs, parapets, walkways, gates etc. and all
other locations as called for with stainless steel of SS grade-304 consisting of tubes of
various sizes like 80 mm, 50 mm, 25 mm dia. and such, flats, solid, square, circular
bars, box sections as called for etc. arranged in verticals and horizontals with
spacings as required and anchored to sides of steps/ slab as shown, hand rail and
other stainless steel pipes (wall thickness minimum 2 mm) fixed to stainless steel
verticals through shaped SS plates/ flats as shown including approved brackets and
all fittings, anchoring arrangements, fixing accessories, cutting, bending, other
incidentals including epoxy paint (min. total DFT 285 microns) of approved colour and
manufacture to all MS inserts, members etc. and approved buffing to stainless steel
members as directed by the engineer in charge etc. The item shall be complete in all
respects including all L,M, misc. and incidental works related to the job. The work
shall be carried out as per drg./ directives of engineer in charge at site to his entire
satisfaction. Ordinary cement will be paid under relevant SOR-2010 item. Nothing
extra will be paid on any account. (717/ADEN-I, 110/ASR)
4 4 NS-4) Item rate for P&F Armstrong acoustical false ceiling with fire fissured RS99 tiles Sqm 1388.26 552.50 767013.65
having humidity assistance 99% RH sound absorption alpha W and light gama W and
light reflectance more than 83%(WT) Thero conductivity k=0.052-0.057w/m0 k weight
(without grid)=3.50 /sqm. Surface 3 coats of white pain with fire fissured . back side
sanded and one coat of paint. the size of tiles will be 600x600mm by 14 mm required
shade and colour . The grid of a powder coated GI sheet double pressed of a
minimum thikness 3mm with main runner of 38mmx24mm and cross runner of
28mmx24mm with interlocking arrangements and GI angle of 25x25x18 gauge all
around the wall for supporting Armstrong grid at suitable interval complete at any
height making hole in wall and marking good the same . The rate includes the cost of
all rowel plugs, screws ,nails , etc. all loading , unloading , leading all L&M, T&P ,all
arrangements , all taxes ,charges , complete jobs . nothing extra will be paid
whatsoever the case may be.
5 5 NS-5) Designing providing and fixing of unitized system based structural glazing to Sqm 398.00 7499.25 2984701.50
provide fixed or openable panel of maximum size of 1600mm x1100mm with
framework fabricated out of aluminum sections (Mullions 100x67 and Transom
50x67) Grade 63400 WP IS:738 AND ID :1285(make JINDAL/ HINDALCO or
approved primary producer of equivalent quantity) electro-colour anodized (25
microns) or pure polyester powder coated (60 microns) in approved shade and
colour including adequately design MS galvanized /aluminum anchor brackets . the
structural glazing design to be based on rain screen and pressure equalized drainage
system and complete drainage system to be incorporated in the design with drain
water at every transom in the unlikely event that water penetrates the pressure seal.
this include structural grade and weathering grade silicon sealant (make DOW
Corning or GE silicon/ or approved primary producer of equivalent quality) as per the
design requirement . The Item includes designing the complete system and supplying
&Getting approved the detailed shop drawings including supplying structural design
calculation based on relevant codel provisions and carrying out water penetration test
as per standards followed in India . The structural glazing shall be 6mm thick heat
reflective tempered hard coated glass of a approved colour &make ("silver light priva
blue colour" of make " Glaverbel" stopsol of belgium or of saint Gobain) . the whole
work to be done through reputed & approved vender having in experience in
structural glazing work in commercial / govt./corporate buildings as per architectural
drawings including requirement of silicon filling with masonry/ RCC work , all heights
including double heights, straights/ curve etc. complete in all respect (excluding the
cost of spandrel insulation.)

Pa g e 17 o f 2 0 Ru n Da te Time: 18 /10 /2 0 17 12 :5 1:0 6


FEROZPUR DIVISION-ENGINEERING/NORTHERN RLY
TENDER DOCUMENT
Tender No: 216-2017-18-DRM-FZR-ASR Closing Date/Time: 27/11/2017 15:00

6 6 NS-6) Extra to NS-6 for providing and fixing insulation glass made of two layers of Sqm 398.00 2556.00 1017288.00
6mm and 5mm toughened glass separated by matellic spacer of 12mm & thematically
sealed with dehydrated air space using moleculer sieve as a descant to prevent
condensation instead of 6mm thick tampered /toughened glass in structural glazing to
provide fixed or open able panels of maximum size 1600mm x 1100mm with frame
work etc. as a complete job.
7 7 NS-7) Providing & Fixing 10mm hollow twin box type multi wall blue coloured Sqm 250.00 4050.04 1012510.00
polycarbonate sheet in curved shape of approved make GE PLASTIC/POLYGAL in
skylight dome with 0.8 thick walls and 0.5mm thick intermediate rib having UV
protection coating film and infrared solar control coating ( heat transmission less then
45%) including providing and fixing coloured powder coated aluminium profiles (
60mmx32mm trapezoidal ) section conforming to IS :733-1983 , Alloy - 606T6
(HINDALCO or jindal ) with alcox fixing arrangements including their fixing with
existing mild steel structure , including cost of joining , "U" profile , all aluminium profile
and fixing accessories. The item includes fixing at all height , all lead , lift all taxes ,
labour and material as a complete job ( the measurement will be taken for the actual
finished surface area of the sheeting.
8 8 NS-8) Fabrication, supply and installation of stainless cladding on RCC/Steel column Sqm 500.00 10814.88 5407440.00
(Square, round, Rectangular)with stainless steel sheet of minimum thickness of
1.6mm (conforming to grade SS 304,or superior) and necessary MS frame work, filler
material,silicon sealant, fastener & finishing as per approved drawing. The finished
surface shall be free from any dent/undufation including all equipment, tool & plant
labour as a complete job. Payment shall be made as per finished surface area.
9 9 NS-9) Manufacturing, supplying , Installation, testing & commissioning of glow sign Sqm 250.00 3229.22 807305.00
boards of various size at all heights the boxes to be made of GI sheet 200mm depth
with weather proof /water proof polymer lining. The base of glow sign will be duly
streched , pan flax sheeting lined with translucent vinyle sheeting of prescribed
colour. The signage will be made of tansulent cast vinyle sheeting type of prescribed
colour. The panaflex vinyle sheeting will be from reputed manufacturer (e.g 3m etc)
and couvered under 4 year warranty, copper bound ISI marked pre-wired fluorescent
tube fitting complete with copper choke ,starter , tube and all accessories as required
and wiring for connection including switches . The rate also include the cost of two
coats of painting of box ,transporation ,fixing material and tax etc . as per site
requirement with all labour &Material as a complete job.
10 10 NS-10) Providing & laying of murals consisting of glass mosaic tiles size Sqm 275.00 4184.00 1150600.00
20mmx20mmx4mm thick (sheet size 327mmx327mm gaping 1.92mm) make Italia or
equivalent over plastered wall (smooth surface ) pillars skirting etc. Including all labour
and application charges with material (adhesive+grout+acid+cotton )including all
leads, lift, nothing extra will be paid on this item as a complete job.
11 11 NS-11) Providing 6mm thick (average) plaster of Paris of SHRIRAM/JK or other Sqm 225.00 149.65 33671.25
equivalent make in ceiling on existing slab ,beam etc. with all material and labour at all
heights as a complete job.
12 12 NS-12) Providing 6 mm to 12mm thick (average) plaster of paris of shriram/jk or other Sqm 675.00 102.58 69241.50
equivalent make over plastered walls etc. with all material and labour at all heights as
a complete job.
13 13 NS-13) Providing cast in situ plaster of paris ornamental/designer false ceiling/false Sqm 800.00 1262.72 1010176.00
column laid over chicken mesh of superior quality fixed on G.I. perforated pressed
metal sheet and frame of section 2'x1" c/c interlocking making hanging arrangement
from RCC/ jack arch roof with superior quality desh fateners , cutting or making
recess for CFL lights and tube lights including making all shapers of caving moulding
and offset including preparation of architectural drawing from qualified Architect/
interior designer ,chicken mesh shall be fixed with steel screws & washers etc. POP
shall be laid over in this frame in two stages i.e. first stage for kucha and second
stage in final finish shape including all labour and Material ,taxes as a complete job.
14 14 NS-14) Providing frame less fixed partition internal glazing between RCC columns Sqm 35.00 4999.50 174982.50
/brick columns by 12 mm thick toughenedt glass fully tempered of Saint Gobain/AIS
/GSC make with all fittings like corner fitting , side connector of DORMA or equivalent
approved make inluding cartage, stacking making cut out as per approved drawing
and as per the instruction of engineer incharge with all labour &material ,tool & plant as
a complete job.
15 15 NS-15) P&F frameless fixed glass door shutter internal glazing by 12mm thick Sqm 8.00 5752.47 46019.76
toughened glass fully tempered as per relevant BIS code of SAINT
GOBAIN/AIS/GSC/MODI GUARD make or equivalent with all fitting such as corner
fitting ,side fitting, side connector ,including fancy type handles 300mm t o450mm long
of approved make etc. of a DORMA or equivalent make top support stainless steel
tube /rod channel required to support partition when partition not up to ceiling level
including cartage ,stacking, making cut out as per approved drawing and as per the
instruction of engineer in charge with all labour and Material ,taxes tools & plants as a
complete job.
16 16 NS-16) IR for Manufacturing supplying and Fixing of Signage as per design to be Sqm 100.00 5220.60 522060.00
made of 2 mm thick aluminium sheet faced to be fully with high density encapsulated
lens type heat activated retro reflective sheeting with massages in similar sheeting in
colour scheme as approved by site Engineer In charge. The retro reflective sheeting
should be adhered to the base sub structure by heat lamp vacuum application. The
signage are to be fixed on the approved structure the rate include all lead, lift at any
height, loading,/unloading all taxes charges all L&M , T&P as a complete Job. Nothing
extra to be paid what so ever the case may be.

Pa g e 18 o f 2 0 Ru n Da te Time: 18 /10 /2 0 17 12 :5 1:0 6


FEROZPUR DIVISION-ENGINEERING/NORTHERN RLY
TENDER DOCUMENT
Tender No: 216-2017-18-DRM-FZR-ASR Closing Date/Time: 27/11/2017 15:00

17 17 NS-17) Providing temporary steel barricading 2.00 m high and making arrangements Metre 350.00 526.75 184362.50
for traffic diversion such as traffic plan during construction period at site for day &
night as per requirement and as per DMRC type drawing. This item will be payable
only once during the entire construction. The stages of construction involve
construction of washable apron ,track work, drainage & allied works and construction
material collecting locations etc. till the completion of work the barricading and traffic
diversion has to be kept continuously. This shall includere positioning or repainting of
barricading and provision of suitable reflectors and red lamps in night the dimensions
of barricade as per drg./ as per direction of Engineer inchargewith all labour & material
as a complete job( the released barricades will be the property of the contractor).
18 18 NS-18) Providing, Erecting and fixing in position 160mm outer dia UPVC rain Metre 96.00 361.81 34733.76
water/sewer pipes (class III) conforming to IS-4985/1985 to with stand a test
pressure of 6Kg/cm2 including the cost of elbows, socket, bends of required degree
and necessary fittings i.e. M.S. clamps, nut bolts etc. wherever required including
cutting and including solvent cement for jointing with all labour and material as a
complete job.(Sample of PVC pipe will be got approved from Engineer in charge
before fixing.)
19 19 NS-19) P&F 40 mm thick Indian granite stone slab to treads of stairs or such other Sqm 170.33 3400.30 579173.10
locations, flamed/ burnt to the approved/ required shade, texture & finish as per
approval of engineer in charge, in flooring etc. laid over average 25 mm thick base of
cement sand mortar 1:4 (1 cement: 4 coarse sand) to the required pattern and
pointing with grey cement slurry mixed with pigment of permanent colour to match the
shade of granite stone including polishing of required/ desired finish. The item includes
cost of making holes in the stone and fixing/ grouting etc. the same to the pins
attached to the base. The item also includes the cost of pins (which should be of
black colour). The work shall be complete in all respects with all labour, material,
misc. and incidental works related to the job. The work shall be carried out as per
directives of engineer in charge at site to his entire satisfaction. Payment of cement
will be made separately under relevant USSOR-2010 item. Nothing extra will be paid
on any account.
20 20 NS-20) P&F 18 to 20 mm thick Granite stone of the coloured and quality as per Sqm 432.59 2393.95 1035598.83
approval of engineer in charge at site on walls, floors, dado, skirting ,steps, pillars,
risers, tread etc. laid on 20 mm thick cement sand mortar 1:4 ( 1 cement: 4 coarse
sand ) and jointed wit h white cement slurry mixed with pigment to match the shade of
granite stone including rubbing, polishing etc. complete. The work shall be complete in
all respects with all L,M misc. and incidental works related to the job. The work shall
be carried out as per directives of engineer in charge at site to his entire satisfaction.
Payment of cement will be made separately under relevant SOR item. Nothing extra
will be paid on any account.
Total 21470858.85

4. ELIGIBILITY CONDITIONS

Special Technical Criteria

S.No. Description Confirmation Remarks Documents


Required Allowed Uploading
Technical Eligibility Criteria: As a proof of technical experience/competence, the tenderer should submit
details as per Tender Form 4B of Annexure-I demonstrating successful physical completion of at least one
Allowed
1 single work for a minimum value of 35% of advertised tender value of similar nature, inclusive of the cost of No No
(Mandatory)
cement and steel, in last three financial years (i.e. Current year and three previous years) from the date of
opening of the tender.
Allowed
1.1 Similar Nature of Work: Any Civil Work other than track work. No No
(Mandatory)

Special Financial Criteria

S.No. Description Confirmation Remarks Documents


Required Allowed Uploading
Financial Eligibility Criteria: As a proof of financial capacity, the Tenderer(s) should submit details as per
Tender Form 4C of Annexure-I demonstrating that the tenderer/s have received total contractual payments
against all completed/on-going works of all types (not confined to only similar works) during the last three
Allowed
1 financial years and in the current financial year (from the date of opening of the tender) of a value not less No No
(Mandatory)
than 150% of the advertised cost of work including the cost of cement and steel. Authentic certificates like
Form 16A issued by Payment Disbursing Authority (other than Private Individual), audited balance sheet duly
certified by the Chartered accountant etc. for each Financial Year must be attached.

5. COMPLIANCE

General Instructions

S.No. Description Confirmation Remarks Documents


Required Allowed Uploading
1 If there is any discrepancy during down loading the tender then original tender will prevail over it. No No Not Allowed
2 If there is any discrepancy in rate & unit of SOR items. The USSOR-2010 will be considered. No No Not Allowed

Undertakings

Pa g e 19 o f 2 0 Ru n Da te Time: 18 /10 /2 0 17 12 :5 1:0 6


FEROZPUR DIVISION-ENGINEERING/NORTHERN RLY
TENDER DOCUMENT
Tender No: 216-2017-18-DRM-FZR-ASR Closing Date/Time: 27/11/2017 15:00

S.No. Description Confirmation Remarks Documents


Required Allowed Uploading
1 I/ We have visited the works site and I / We am / are aware of the site conditions. No No Not Allowed

6. Documents attached with tender

S.No. Document Name Document Description


1 ACS-1-2014.pdf ACS 1 2014
2 ACS-2-2014.pdf ACS 2 2014
3 GCC-JULY-2014.pdf GCC JULY 2014
4 GST-CIRCULAR-2017.pdf GST CIRCULAR 2017
5 STANDARD-TENDER-DOCUMENT.pdf STANDARD TENDER DOCUMENT

Signed By: AMRIK SINGH

Designation : DENIII

Pa g e 2 0 o f 2 0 Ru n Da te Time: 18 /10 /2 0 17 12 :5 1:0 6

Вам также может понравиться