Академический Документы
Профессиональный Документы
Культура Документы
PRELIMINARY
Title page
Alcatel-Lucent 9322
digital Compact Node B
Technical Description
3MN-00480-0001-DEZZA
Issue 0.02 | February 2014
PRELIMINARY
Alcatel-Lucent – Proprietary
Use pursuant to applicable agreements
Use pursuant to applicable agreements
Legal notice
PRELIMINARY
Legal notice
Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of Alcatel-Lucent. All other trademarks are the property of their respective
owners.
The information presented is subject to change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein.
Copyright © 2014 Alcatel-Lucent. All rights reserved.
Contains proprietary/trade secret information which is the property of Alcatel-Lucent and must not be made available to, or copied or used by anyone outside
Alcatel-Lucent without its written authorization.
Not to be used or disclosed except in accordance with applicable agreements.
PRELIMINARY
Alcatel-Lucent – Proprietary
Use pursuant to applicable agreements
Contents
PRELIMINARY
About this document
Purpose ............................................................................................................................................................................................. xi
xi
1 UTRAN introduction
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary iii
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY Contents
....................................................................................................................................................................................................................................
9322 dCompact physical and environmental characteristics .................................................................................. 2-12
2-12
Compact Optical Interface Module with connectivity for two optical fibers (C2OIM) ............................... 3-40
3-40
Compact Optical Interface Module with connectivity for three optical fibers (C3OIM) ............................ 3-46
3-46
....................................................................................................................................................................................................................................
iv Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
Contents
PRELIMINARY
....................................................................................................................................................................................................................................
9322 dCompact cooling and heating system
User racks
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary v
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY Contents
....................................................................................................................................................................................................................................
A Document issue history
Index
PRELIMINARY
....................................................................................................................................................................................................................................
vi Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
List of tables
PRELIMINARY
1 Document changes for Issue 0.02, February 2014 ........................................................................................... xi
3-1 Backplane and digital shelf modules supported by the 9322 dCompact cabinet ............................. 3-11
3-12 xCCM MDA GE ports (in configuration xCCM-GE) and Ethernet ports (mother board) LEDs
............................................................................................................................................................................ 3-353-35
3-35
....................................................................................................................................................................................................................................
3-22 UCPS module dimensions and weight ............................................................................................................ 3-77
3-26 User Alarm pin connections for UMTS use .................................................................................................. 3-95
....................................................................................................................................................................................................................................
viii Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
List of figures
PRELIMINARY
1-1 Alcatel-Lucent UTRAN architecture example ............................................................................................... 1-4
2-1 Outside view of the 9322 dCompact Indoor and Outdoor cabinets ........................................................ 2-4
3-1 Compartment layout in the 9322 dCompact OD cabinet (Outdoor AC variant) ................................ 3-2
3-2 Location of modules in the 9322 dCompact OD cabinet (Outdoor AC variant) ................................ 3-3
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary ix
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY List of figures
....................................................................................................................................................................................................................................
3-19 C3OIM-GM front panel ........................................................................................................................................ 3-49
3-24 UCPS front panel (equipped with ADU and two rectifiers) .................................................................... 3-61
3-26 UCPS ADU control and power signal distribution architecture ............................................................ 3-64
3-29 UCPS shelf control and power signal distribution architecture ............................................................. 3-68
3-35 CECU front panel (with heaters - 9322 dCompact ODAC cabinet) .................................................... 3-85
3-36 CECU front panel (without heaters - 9322 dCompact ID DC cabinet) ............................................... 3-86
3-40 Distribution system architecture for short backup internal battery ....................................................... 3-98
3-42 Distribution system architecture for long backup internal batteries .................................................. 3-101
PRELIMINARY
....................................................................................................................................................................................................................................
x Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
PRELIMINARY
About this document
About this document
Purpose
The purpose of this document is to describe the Alcatel-Lucent 9322 digital Compact
Node B. Its short name is 9322 dCompact.
The 9322 dCompact is designed to be used with one of the following radio devices:
• Alcatel-Lucent 9332 radio Compact Node B (9332 rCompact)
• Alcatel-Lucent Remote Radio Head 20W 2100MHz (RRH20-21)
This document only describes the 9322 dCompact. For detailed information about the
9332 rCompact and RRH20-21, see the following documents:
• Alcatel-Lucent 9332 radio Compact Node B - Technical Description,
3MN-00483-0001-DEZZA
• Alcatel-Lucent Remote Radio Head 20W 2100 MHz - Technical Description,
3MN-00485-0001-DEZZA
What's New
The major changes introduced in this issue of the document are described in the following
paragraphs. Changes introduced in prior issues of the document are shown in Appendix
A, “Document issue history”.
Document changes from the previous software release
The document changes for this issue are shown in Table 1, “Document changes for Issue
0.02, February 2014” (p. xi):
....................................................................................................................................................................................................................................
Intended audience
The audience for this document is Operations and maintenance personnel, and anyone
interested in learning more about the 9322 dCompact.
Supported systems
This document applies to all system releases.
Prerequisites
None
Conventions used
Vocabulary conventions
For a list of terms used in this document, see Alcatel-Lucent W-CDMA System -
Terminology, 9YZ-04088-0002-TQZZA.
This document uses some terms generically.
Typographical conventions
The following typographical convention is used in this document:
Appearance Description
Document reference, reference number Related document that is referenced in the document.
PRELIMINARY
....................................................................................................................................................................................................................................
xii Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
About this document
PRELIMINARY
....................................................................................................................................................................................................................................
Related information
For information on subjects related to the content of this document, refer to the
documents listed in the following table:
Document support
For support in using this or any other Alcatel-Lucent document, contact Alcatel-Lucent at
PRELIMINARY
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary xiii
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY About this document
....................................................................................................................................................................................................................................
Technical support
For technical support, contact your local Alcatel-Lucent customer support team. See the
Alcatel-Lucent Support web site (http://www.alcatel-lucent.com/support/) for contact
information.
How to order
To order Alcatel-Lucent documents, contact your local sales representative or use Online
Customer Support (OLCS) (http://support.alcatel-lucent.com)
How to comment
To comment on this document, go to the Online Comment Form (http://infodoc.alcatel-
lucent.com/comments/) or e-mail your comments to the Comments Hotline
(comments@alcatel-lucent.com).
PRELIMINARY
....................................................................................................................................................................................................................................
xiv Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
PRELIMINARY
1 UTRAN introduction
1
Overview
Purpose
This chapter describes the Universal Mobile Telecommunications System (UMTS)
Terrestrial Radio Access Network (UTRAN).
Contents
PRELIMINARY
...................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 1-1
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY UTRAN introduction UTRAN introduction
....................................................................................................................................................................................................................................
UTRAN introduction
UTRAN components
The UTRAN is composed of at least one Radio Network Subsystem (RNS). An RNS
covers a certain geographical area. It is equivalent to the GSM BSS. Each RNS is
composed of one Radio Network Controller (RNC) and one or more Node Bs. RNSs are
interconnected through the Iur interface of each RNC to form a network.
Alcatel-Lucent UTRAN
The Alcatel-Lucent UTRAN is based on the following components:
• RNC
• Node B
• WMS for the OAM part
RNC
The Alcatel-Lucent RNC is 3GPP-compliant. It is based on the Multiservice Switch
platform.
RNC interfaces
The RNC provides the following interfaces:
• Iub towards a Node B
• Iu towards the Core Network
• Iur towards another RNC
• Iupc towards a Standalone A-GPS SMLC (SAS)
Node B
The Alcatel-Lucent Node Bs are 3GPP-compliant. The Alcatel-Lucent Node B portfolio
PRELIMINARY
includes:
• Conventional unitary base stations
• Digital base stations
• Radio base stations
....................................................................................................................................................................................................................................
1-2 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
UTRAN introduction UTRAN introduction
PRELIMINARY
....................................................................................................................................................................................................................................
• Radio heads
• Base station routers
Node B interfaces
The Node B provides the following interfaces:
• Iub towards an RNC
• Uu towards a UE
• Interface B towards WMS
PRELIMINARY
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 1-3
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY UTRAN introduction UTRAN introduction
....................................................................................................................................................................................................................................
WMS
PRELIMINARY
....................................................................................................................................................................................................................................
1-4 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
UTRAN introduction UTRAN introduction
PRELIMINARY
....................................................................................................................................................................................................................................
It plays an important role in providing the foundation of a complete end-to-end
management solution for UMTS networks. The WMS manages the entire UMTS
network, which is divided into:
• The UTRAN
• The Core Network (circuit-switched and packet-switched traffics).
The Access Network OAM manages the UTRAN part of the network.
NSP
The Network Services Platform (NSP) is a graphical user interface to the Access Network
providing a common platform for navigation and control. The NSP interfaces with the
NEs through a Common Object Request Broker Architecture (CORBA). This
vendor-independent architecture links computer applications across different networks.
This network configuration requires 9322 dCompact or d2U NodeB equipped with GE
MDA and full IP backhaul. Besides, only Alcatel-Lucent base stations are supported in
the daisy chain.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 1-5
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY UTRAN introduction UTRAN introduction
....................................................................................................................................................................................................................................
In this configuration, the both NodeBs are managed by the same OMC and RNC.
....................................................................................................................................................................................................................................
1-6 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
UTRAN introduction UTRAN introduction
PRELIMINARY
....................................................................................................................................................................................................................................
Figure 1-4 NodeB dropping 2G BTS
In this configuration, the 2G BTS has to be configured with ABIS interface over
IP/Ethernet.
PRELIMINARY
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 1-7
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY UTRAN introduction UTRAN introduction
....................................................................................................................................................................................................................................
PRELIMINARY
....................................................................................................................................................................................................................................
1-8 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
PRELIMINARY
2 2322 dCompact basic
9
characteristics
Overview
Purpose
This chapter describes the basic characteristics of the 9322 dCompact.
Contents
PRELIMINARY
...................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 2-1
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact basic characteristics 9322 dCompact introduction
....................................................................................................................................................................................................................................
Benefits
The Alcatel-Lucent Remote Radio solution improves flexibility for deploying mobile
broadband Node Bs in space-constrained locations. It is particularly suited to
macro-cellular applications in dense areas, where site acquisition is difficult, and on sites
where installation constraints prevent the use of legacy Node Bs.
Compared to legacy Node B site deployment, the Remote Radio solution provides the
following benefits:
• Reduced volume, weight, footprint, acoustic noise, and power consumption
• Reduced cost of feeder paths from the Node B to the antenna
• Increased RF power per carrier at the antenna feeder
• Reduced radio loss with use of the remote RF block concept, which eliminates the
distance between the radio amplifier and the antenna
The Remote Radio solution provides for the UMTS system:
• The means of communication between a User Equipment (UE) and a network using
Transport Channels
• Physical layer channels, which are necessary to synchronize the downlink and
perform cell selection/reselection and handover preparation
• Measurement information to the RNC for radio resource management (handover,
power control)
The 9322 dCompact provides up to eight E1/T1 with Inversion Multiplexing ATM (IMA)
or Drop-and-Insert capability (fractional E1/T1). The 9322 dCompact also supports
multi-PCM without IMA.
PRELIMINARY
The 9322 dCompact delivers high UMTS radio performances and supports the enhanced
High Speed Downlink Packet Access (HSDPA) and High Speed Uplink Packet Access
(HSUPA) solutions through easy software upgrade.
The 9322 dCompact is compliant with the Common Public Radio Interface (CPRI).
....................................................................................................................................................................................................................................
2-2 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
9322 dCompact basic characteristics 9322 dCompact introduction
PRELIMINARY
....................................................................................................................................................................................................................................
9322 dCompact cabinets
The 9322 dCompact provides the operators with a suited solution whatever the site
constraints are. The same cabinet addresses indoor (ID) and outdoor (OD) applications,
providing the operator with installation flexibility. Indoor and outdoor versions differ only
in their protective shielding and climatic control (heaters for outdoor version, no heaters
for indoor version).
As for other macro Node B cabinets, the 9322 dCompact cabinets, combined with
RRH20-21 modules, deliver high UMTS radio performances and support the enhanced
High Speed Downlink Packet Access (HSDPA) and High Speed Uplink Packet Access
(HSUPA) solutions through easy software upgrade.
The following figure shows an outside view of the 9322 dCompact Indoor and Outdoor
cabinets. The two cabinet versions share the same enclosure with a single door and the
following specificities:
• The Outdoor cabinet is equipped with a specific double-skin door and has a second
skin on the top and sides.
• The Indoor cabinet is equipped with a specific single-skin door and has no second
skin on the top and sides.
PRELIMINARY
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 2-3
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact basic characteristics 9322 dCompact introduction
....................................................................................................................................................................................................................................
Figure 2-1 Outside view of the 9322 dCompact Indoor and Outdoor cabinets
PRELIMINARY
....................................................................................................................................................................................................................................
2-4 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
9322 dCompact basic characteristics 9322 dCompact features and functions
PRELIMINARY
....................................................................................................................................................................................................................................
Performance monitoring
The performance monitoring function is in charge of collecting performance
PRELIMINARY
measurement data from the network interface function and from the
configuration/supervision function.
The measurement data is used to calculate and report performance data to the RNC for
traffic control and to the WMS for network operation and tuning.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 2-5
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact basic characteristics 9322 dCompact features and functions
....................................................................................................................................................................................................................................
Network interface
This function is in charge of managing interfaces with RNC:
• Physical layer management (configuration, alarm reporting)
• Layer 2 (IMA and switching for example)
The standard network interface of the 9322 dCompact is eight PCM E1, with a layer 2
IMA machine handling up to four IMA groups, fractional PCM (Drop-and-Insert
capability), and redundancy management.
Configuration/supervision
This function is in charge of:
• Module configuration and supervision
• Inventory information reporting
• Plug-and-play management
The remote inventory functionality provides the UMTS OAM access to determine the
inventory information of the Node B. The remote inventory is performed for the
following modules: iCEM-2/xCEM/eCEM, iCCM-2/xCCM, fan rack, optional modules
(alarm module, LPPCM), GPxOIM.
Synchronization
This function is in charge of retrieving highly stable radio frequency from either network
interface or optional GPS receiver.
The 9322 dCompact can be synchronized through the following means:
• E1/T1 PCM link (standard synchronization mechanism)
The E1/T1 link used for synchronization does not carry any data traffic.
• Local GPS receiver
In the GPS-based synchronization solution, the xCCM module is connected to a GPS
smart antenna/receiver that provides GPS synchronization source (Pulse Per Second
(PPS) synchro input from the antenna).
• IEEE 1588v2 Precision Time Protocol (PTP)
The PTP-based synchronization solution relies on time servers connected to the 9322
dCompact through the Ethernet network.
Note: This synchronization mechanism only applies to native IP Node B .
• Synchronous Ethernet
Note: This synchronization mechanism only applies to native IP Node B .
PRELIMINARY
....................................................................................................................................................................................................................................
2-6 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
9322 dCompact basic characteristics 9322 dCompact external interfaces
PRELIMINARY
....................................................................................................................................................................................................................................
Network interface
The Iub network interface consists of eight E1 or T1 PCM links:
• E1 link complies with ITU G703/G704
• T1 link is based on the ANSI standard
The raw data rate between the Node B and the RNC can be as high as 15.872 Mbps (E1)
or 12.288 Mbps (T1). Depending on the data flow, ATM AAL2 and AAL5 are used on the
above physical link through IMA. The IMA framing provides physical link performance
monitoring and management.
The hybrid Iub interface consists of:
• ATM/PCM connectivity for R99, HSDPA, or HSUPA signaling and OAM traffic
• IP/Ethernet connectivity for HSPA traffic (HSDPA + HSUPA, or HSDPA only)
The hybrid Iub interface requires an xCCM module (xCCM-4E1 or xCCM-GE hardware
configuration).
The native IP Iub interface consists of a full IP/Ethernet transport on Iub interface. When
native IP Iub feature is deployed, the ATM/PCM connectivity is no more used on Iub.
The native IP Iub interface requires an xCCM module (xCCM-GE hardware
configuration).
For PCM connection cables, D-SUB connectors are located at the bottom of the 9322
dCompact cabinet. The PCM cable is connected to the Iub port on the Node B bulkhead
and to the distribution frame.
For a 120-ohm network, only the 120-ohm PCM cable is needed for PCM connection.
For a 75-ohm network, two baluns per PCM are required to adapt from the Node B (120
PRELIMINARY
ohm) to the customer network (75 ohm). Three types of baluns can be used: BNC,
1.6/5.6, or SMZ type 43.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 2-7
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact basic characteristics 9322 dCompact external interfaces
....................................................................................................................................................................................................................................
Optical interface
The optical interface consists of two or three ports (C2OIM or C3OIM) corresponding to
a maximum of two or three RRH20-21 connections.
User equipment
The 9322 dCompact cabinet provides a user compartment with a 48 V power supply of
the following maximum capacity:
• One horizontal standard 19-inch 2U user rack at the top end of the cabinet
• One dedicated slot for an optional short backup internal battery, underneath the 2U
described above
• One dedicated 1U slot for the Compact User InterCOnnect (C-User ICO) module,
underneath the slot described above
• One horizontal 9.5-inch 2U user rack for the optional PCM Lightning Protection and
Internal/External Alarm modules, underneath the 1U described above
The 9322 dCompact also provides four user alarms (one-wire bus), managed by the
GPxOIM board.
The C-User ICO provides connectivity for four –48 V DC power supplies with associated
fuses. A maximum of 300 W is allowed for equipment in the user compartment.
A vertical 3U "passive" user space can be equipped when optional long backup internal
batteries are not used.
PRELIMINARY
....................................................................................................................................................................................................................................
2-8 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
9322 dCompact basic characteristics 9322 dCompact power supply interface
PRELIMINARY
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 2-9
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact basic characteristics 9322 dCompact power supply interface
....................................................................................................................................................................................................................................
The energy system is based on the Universal Compact Power System (UCPS). The AC
interface module is the AC Distribution Unit (ADU). It provides:
• EMI filters
• Alarmed main breaker and surge protection
• AC protection termination
Internal battery option is available on AC mode. External battery solution is not
supported.
PRELIMINARY
....................................................................................................................................................................................................................................
2-10 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
9322 dCompact basic characteristics 9322 dCompact optional features
PRELIMINARY
....................................................................................................................................................................................................................................
PRELIMINARY
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 2-11
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact basic characteristics 9322 dCompact physical and environmental characteristics
....................................................................................................................................................................................................................................
– Footprint: 0.377 m2
– Volume: 407 l
....................................................................................................................................................................................................................................
2-12 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
9322 dCompact basic characteristics 9322 dCompact physical and environmental characteristics
PRELIMINARY
....................................................................................................................................................................................................................................
When the 9322 dCompact ID is installed on the floor, the plinth delivered with the
cabinet is mandatory. When the 9322 dCompact ID is installed on a wall or pole, an
additional mounting kit is required. In this case, the plinth is not mandatory but a
200-mm space is needed below the cabinet for airflow.
• Weight:
– Fully equipped: 81 kg
– Empty (pre-cabled cabinet): 50 kg
– Plinth: 10 kg
The 9322 dCompact ID cabinet is designed to support an external temperature range of
–5°C to +45°C, with an absolute humidity between 0.03 g/m3 and 36 g/m3.
The 9322 dCompact ID cabinet is obtained from the 9322 dCompact OD cabinet by
removing:
• The second skin from the top and sides of the cabinet
• The outdoor double-skin door and replacing it with the specific indoor single skin
door
• The heaters
PRELIMINARY
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 2-13
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact basic characteristics 9322 dCompact physical and environmental characteristics
....................................................................................................................................................................................................................................
PRELIMINARY
....................................................................................................................................................................................................................................
2-14 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
PRELIMINARY
3 3322 dCompact hardware
9
description
Overview
Purpose
The 9322 dCompact is built around the following blocks:
• The digital shelf
• The power system
• The cooling system
• The user compartment and the associated C-User ICO module
• The bulkhead
As the 9322 dCompact cabinet does not house an RF module, it does not integrate an RF
interconnection module.
The following figure shows the layout of the compartments in the 9322 dCompact OD
cabinet.
PRELIMINARY
...................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 3-1
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact hardware description Overview
....................................................................................................................................................................................................................................
9322 dCompact views
The following figure shows the inside view of the 9322 dCompact OD cabinet.
PRELIMINARY
....................................................................................................................................................................................................................................
3-2 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
9322 dCompact hardware description Overview
PRELIMINARY
....................................................................................................................................................................................................................................
PRELIMINARY
The bulkhead of the 9322 dCompact cabinet stands horizontally, just above the plinth
designed for airflow and cabling, and in front of the air filter area.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 3-3
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact hardware description Overview
....................................................................................................................................................................................................................................
This bulkhead provides the following interfaces:
• AC or DC power interface (AC or DC cable gland inlet on removable bulkhead)
• Digital links:
– Iub interface: One 44-pin High Density D-SUB connector
– External Alarm 1: One 25-pin D-SUB connector
– External Alarm 2: One 25-pin D-SUB connector
– Spare 1: One 25-pin D-SUB connector
• Optical fiber output to 9332 rCompact or RRHs: Up to three connectors (O-M 1, O-M
2, O-M 3)
• Output 48 V DC for RRHs: Up to three 15-pin D-SUB connectors (DC Out 1, DC Out
2, DC Out 3)
• Other OEM equipment: Up to three connectors (Spare 2, Spare 3, Spare 4)
The right part of the bulkhead is blank or customer specific.
The following figure details the bulkhead of the 9322 dCompact.
PRELIMINARY
....................................................................................................................................................................................................................................
3-4 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
9322 dCompact hardware description Overview
PRELIMINARY
....................................................................................................................................................................................................................................
PRELIMINARY
Contents
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 3-5
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact hardware description Overview
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
3-6 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
9322 dCompact hardware description Overview
PRELIMINARY
....................................................................................................................................................................................................................................
PRELIMINARY
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 3-7
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact hardware description Overview
9322 dCompact digital shelf
....................................................................................................................................................................................................................................
Overview
Purpose
This section describes the modules housed in the digital shelf of the 9322 dCompact
cabinet.
Contents
....................................................................................................................................................................................................................................
3-8 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
9322 dCompact hardware description 9322 dCompact digital shelf modules
PRELIMINARY
9322 dCompact digital shelf
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 3-9
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact hardware description 9322 dCompact digital shelf modules
9322 dCompact digital shelf
....................................................................................................................................................................................................................................
This module embeds a Global Positioning System and Alarm function and an Optical
Interface function. It aggregates:
– The GPxOIM board in charge of supporting external/internal alarm connectivity
and external synchronization reference interface
– The Compact Optical Interface Module (CxOIM), with connectivity for two
(C2OIM) or three optical fibers (C3OIM)
This module is in charge of electrical-optical conversion for both uplink and
downlink.
It reports alarms and provides inventory information through the GPxOIM board.
The following figure illustrates the functional architecture of the 9322 dCompact.
....................................................................................................................................................................................................................................
3-10 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
9322 dCompact hardware description 9322 dCompact digital shelf modules
PRELIMINARY
9322 dCompact digital shelf
....................................................................................................................................................................................................................................
The 9322 dCompact cabinet controls the RRH20-21 modules through optical fibers
carrying digital links compliant with the High Speed Serial Link (HSSL) interface. This
control interface is based on the CxOIM and DBP402 digital shelf equipment. The
DBP402 routes the HSSL links between the CCM module and each CEM module, and
between the CCM module and the CxOIM.
The 9322 dCompact cabinet supports the digital shelf modules listed in the following
table.
Table 3-1 Backplane and digital shelf modules supported by the 9322 dCompact
cabinet
Function Module
Backplane DBP402
xMBP
CCM iCCM-2
xCCM
CEM iCEM-2 64
iCEM-2 128
xCEM
eCEM
OIM C3OIM-GS = C3OIM with Single-Mode (SM) optical transceivers
C3OIM-GM = C3OIM with Multi-Mode (MM) optical transceivers
C2OIM-GS = C2OIM with Single-Mode (SM) optical transceivers
C2OIM-GM = C2OIM with Multi-Mode (MM) optical transceivers
GPSAM GPxOIM board
The 9322 dCompact digital shelf houses seven slots, shared as follows:
• One slot for the CCM (slot 4)
• Up to five slots for the CEMs (slot 1, slot 2, slot 3, slot 5, slot 6)
• One slot for the GPxOIM mechanics (slot 7)
This slot is shared by the CxOIM and the GPxOIM board.
The following figure shows the digital shelf layout.
PRELIMINARY
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 3-11
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact hardware description 9322 dCompact digital shelf modules
9322 dCompact digital shelf
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
3-12 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
9322 dCompact hardware description integrated Channel Element Module - 2nd generation
PRELIMINARY
9322 dCompact digital shelf (iCEM-2)
....................................................................................................................................................................................................................................
Main functions
The iCEM-2 comprises two main functional blocks:
• The Base-Band Unit (BBU)
The BBU performs all the transmit and receive base-band signal processing functions
for each of the UMTS channels supported (layer 1 of the UMTS radio network).
• The Interface and Control Unit (ICU)
The ICU provides the data, control and timing interfaces to the 9322 dCompact. It
also performs iCEM-2 control and management functions.
The iCEM-2 performs digital signal processing for both the Tx and Rx paths. The
iCEM-2 processes all types of UMTS physical channels in both the uplink and downlink
directions. Processing differs according to the type of physical channels. High-rate data
channels require much more processing power than low-rate speech channels. The
architecture of the iCEM-2 is well adapted to UMTS physical channel diversity. The
iCEM-2 hardware is designed to support up to two UMTS frequencies for three-sector
operation and two branch transmit and receive diversity per sector.
The iCEM-2 allows up to three-way softer hand-off. It manages a signal delay adjustment
to compensate for delay through the 9322 dCompact transmission path. A rack receiver is
used to comprise classical DLLs, searcher, and finger assignment algorithms.
Hardware description
The iCEM-2 64 comprises a single mother board with both ICU and BBU functions. The
iCEM-2 128 is based on this mother board and on a daughter board with an additional
BBU function that provides more processing power. A Mini BackPlane (MBP) provides
PRELIMINARY
the interface between the 9322 dCompact digital backplane and the internal circuitry of
the iCEM-2.
The following figures show the iCEM-2 64 and the iCEM-2 128 front panels.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 3-13
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact hardware description integrated Channel Element Module - 2nd generation
9322 dCompact digital shelf (iCEM-2)
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
3-14 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
9322 dCompact hardware description integrated Channel Element Module - 2nd generation
PRELIMINARY
9322 dCompact digital shelf (iCEM-2)
....................................................................................................................................................................................................................................
Figure 3-7 iCEM-2 128 front panel
Port description
PRELIMINARY
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 3-15
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact hardware description integrated Channel Element Module - 2nd generation
9322 dCompact digital shelf (iCEM-2)
....................................................................................................................................................................................................................................
The iCEM-2 front panel also has one Reset button accessible through an eye in the front
panel.
LED description
The iCEM-2 front panel has two corporate LEDs indicating the iCEM-2 status.
Interface description
All signals to and from the iCEM-2 are carried on a full duplex High Speed Serial Link
(HSSL).
The main internal signals of the iCEM-2 are the base-band data, the ATM traffic
information, the timing signals, and the control signaling.
DC power
The iCEM-2 is powered by a –48 V DC power supply received through the digital
backplane. Each iCEM-2 receives this voltage via the MBP.
PRELIMINARY
....................................................................................................................................................................................................................................
3-16 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
9322 dCompact hardware description extended Channel Element Module (xCEM)
PRELIMINARY
9322 dCompact digital shelf
....................................................................................................................................................................................................................................
Hardware description
The xCEM and iCEM-2 front panels are identical.
The following figure shows the xCEM front panel.
PRELIMINARY
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 3-17
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact hardware description extended Channel Element Module (xCEM)
9322 dCompact digital shelf
....................................................................................................................................................................................................................................
Port description
PRELIMINARY
PRELIMINARY
9322 dCompact digital shelf
....................................................................................................................................................................................................................................
The xCEM front panel also has one Reset button accessible through an eye in the front
panel.
LED description
The xCEM front panel has two corporate LEDs indicating the following xCEM status:
Interface description
All signals to and from the xCEM are carried on a full duplex high speed serial link
(HSSL).
The main internal signals of the xCEM are the base-band data, the ATM traffic
information, the timing signals, and the control signaling.
DC power
The xCEM is powered by a –48 V DC power supply received through the digital
backplane.
PRELIMINARY
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 3-19
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact hardware description enhanced Channel Element Module (eCEM)
9322 dCompact digital shelf
....................................................................................................................................................................................................................................
Main functions
The eCEM has the same format, fit, and function as the xCEM module.
It is built with new generation components allowing an increased processing power and
performance.
It comes with new functionalities including:
• Number of downlink (DL) codes for HSDPA increased to 90 (48 for xCEM)
• Increased board throughput for HSDPA, up to 40 Mbps (28.8 Mbit/s for xCEM)
• Increased board throughput for HSUPA, up to 33 Mbps (10.8 Mbps on xCEM)
The eCEM is interchangeable and mixable with the iCEM-2 and xCEM modules.
Technically, it can be replaced by an iCEM-2/xCEM. However, the repair process
recommends to replace an eCEM by another eCEM.
The 9322 dCompact can work with any mix of iCEM-2/xCEM/eCEM.
The internal architecture remains unchanged between iCEM-2/xCEM/eCEM modules.
Hardware description
The following figure shows the eCEM front panel.
PRELIMINARY
....................................................................................................................................................................................................................................
3-20 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
9322 dCompact hardware description enhanced Channel Element Module (eCEM)
PRELIMINARY
9322 dCompact digital shelf
....................................................................................................................................................................................................................................
Port description
The eCEM front panel has the following connectors:
PRELIMINARY
• One Debug Ethernet connector (RJ-45 type connector) for synchronization of test
equipment (labeled “DEBUG ICU”)
• One Sync connector (RJ-45 type connector) (labeled “DEBUG BBU”)
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 3-21
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact hardware description enhanced Channel Element Module (eCEM)
9322 dCompact digital shelf
....................................................................................................................................................................................................................................
The eCEM front panel also has:
• One Reset button accessible through an eye in the front panel
• One handle
LED description
The eCEM front panel has the following LEDs:
• Two corporate LEDs (one green, one red)
• One LED labeled “Mode”
• One LED labeled “Status”
The two corporate LEDs indicate the board status as indicated in the following table.
The LED labeled “Mode” indicates the type of software running in the eCEM board. In
this release, the eCEM is only applicable to UMTS software (LED amber).
The LED labeled “Status” is not used.
Interface description
All signals to and from the eCEM are carried on a full duplex high speed serial link
(HSSL).
The main internal signals of the eCEM are the base-band data, the ATM traffic
information, the timing signals, and the control signaling.
DC power
The eCEM is powered by a –48 V DC power supply received through the digital
PRELIMINARY
backplane.
....................................................................................................................................................................................................................................
3-22 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
9322 dCompact hardware description integrated Core Controller Module - 2nd generation
PRELIMINARY
9322 dCompact digital shelf (iCCM-2)
....................................................................................................................................................................................................................................
Main functions
The iCCM-2 provides the following functions:
• Iub interface
• Call processing
• Data switching and routing
• OAM management
• Node B frequency and timing reference
One iCCM-2 supports up to three wide-band carriers with transmit and receive diversity
in a tri-sectored carrier configuration.
Hardware description
The iCCM-2 is packaged into a two-slot module (iCCM-2 board + filler board).
The following figure shows the iCCM-2 front panel.
PRELIMINARY
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 3-23
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact hardware description integrated Core Controller Module - 2nd generation
9322 dCompact digital shelf (iCCM-2)
....................................................................................................................................................................................................................................
Port description
The iCCM-2 front panel has the following connectors:
• Port 1 (Ethernet 10Base-T) used for Ethernet access
....................................................................................................................................................................................................................................
3-24 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
9322 dCompact hardware description integrated Core Controller Module - 2nd generation
PRELIMINARY
9322 dCompact digital shelf (iCCM-2)
....................................................................................................................................................................................................................................
Note: An external device can be connected to port 1 to offer a total of 16 E1/T1
connections.
• Port 2 (Fast Ethernet 10/100Base-T) used for TIL connection
• One E1/T1 connector (44-pin High Density D-SUB female connector) for Node B
commissioning labeled REF OUT and ES OUT
Note: This E1/T1 connector provides a maximum data rate of 16 Mbps.
The maximum data rate can be boosted to 32 Mbps by using 16 E1/T1 connections,
either with two iCCMs-2 or with one iCCM-2 plus an external device (see previous
Note).
The iCCM-2 front panel also has one Reset button.
LED description
The iCCM-2 front panel has the following LEDs:
• Two corporate LEDs indicating the iCCM-2 status:
Table 3-4 iCCM-2 corporate LED behavior
Interface description
• IP V6 readiness
• iCCM-2 duplex readiness
The iCCM-2 is linked with the iCEM-2 by a point-to-point HSSL connection.
....................................................................................................................................................................................................................................
3-26 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
9322 dCompact hardware description integrated Core Controller Module - 2nd generation
PRELIMINARY
9322 dCompact digital shelf (iCCM-2)
....................................................................................................................................................................................................................................
Extension interface
The extension interfaces are between the iCCM-2 slot and its extension slot.
DC power
The iCCM-2 is powered by a –48 V DC power supply received through the digital
backplane.
The iCCM-2 is protected against polarity inversion.
PRELIMINARY
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 3-27
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact hardware description extended Core Controller Module (xCCM)
9322 dCompact digital shelf
....................................................................................................................................................................................................................................
Main functions
In addition to the iCCM-2 functionalities, the xCCM module provides the following
functionalities:
• CPRI compatibility through a future extension board
• HSDPA/HSUPA traffic separation
• Hybrid Iub interface
The hybrid Iub interface consists of:
– ATM/PCM connectivity for R99, HSDPA, or HSUPA signaling and OAM traffic
– IP/Ethernet connectivity for HSPA traffic (HSDPA + HSUPA, or HSDPA only)
Note: Hybrid Iub bandwidth pools resiliency (default configuration)
When IP connectivity is lost, new HSPA calls are transferred on the ATM path.
If the ATM path is configured into separate pools (one dedicated for HSPA on IP, the
other shared with R99 on ATM), and the dedicated pool fails, then new HSPA calls are
put in the shared pool.
• Native IP Iub interface
The native IP Iub interface consists of a full IP/Ethernet transport on Iub interface.
When native IP Iub feature is deployed, the ATM/PCM connectivity is no more used
on Iub.
Hardware description
Like the iCCM-2, the xCCM board is packaged into a dual slot xCCM module (xCCM
PRELIMINARY
board + filler or extension board) which size is similar to the iCCM-2 module (50-mm
wide).
....................................................................................................................................................................................................................................
3-28 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
9322 dCompact hardware description extended Core Controller Module (xCCM)
PRELIMINARY
9322 dCompact digital shelf
....................................................................................................................................................................................................................................
The xCCM is composed of the following boards:
• The Control and Base-Band (CBB) board that manages the base-band routing and
summing, and up to seven HSSL links on the digital backplane
• The Media Dependent Adaptor (MDA) mezzanine board for transport functions
Two hardware configurations are available:
– xCCM mother board with a E1/T1 MDA (xCCM-4E1)
– xCCM mother board with a GE MDA (xCCM-GE)
• The Mini-BackPlane (MBP) that provides connectivity between the CBB board and
the digital backplane
Port description
The xCCM front panel provides the following connectors:
• One 26-pin High Density D-SUB connector for four E1/T1 connections
• One 25-pin High Density D-SUB connector for four E1/T1 connections when the
E1/T1 MDA is plugged
• Two SFP cages (1000 BaseX) and one RJ45 (100/1000Base-T) connector for two
Ethernet Physical ports when the GE MDA is plugged
Note: The second SFP and the RJ45 connector share the same Ethernet port.
• Two RJ45 connectors (10/100Base-T):
– Port 1 (upper port) for Site LAN or TIL connection
Note: An additional hub is used for simultaneous connections (Site LAN + TIL).
– Port 2 (lower port) for hybrid Iub interface in configuration xCCM-4E1
• One timing reference port (SMB female connector) for future use
The xCCM front panel provides a reset button.
The following figures show the xCCM front panel.
PRELIMINARY
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 3-29
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact hardware description extended Core Controller Module (xCCM)
9322 dCompact digital shelf
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
3-30 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
9322 dCompact hardware description extended Core Controller Module (xCCM)
PRELIMINARY
9322 dCompact digital shelf
....................................................................................................................................................................................................................................
Figure 3-12 xCCM front panel in configuration xCCM-GE
LED description
PRELIMINARY
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 3-31
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact hardware description extended Core Controller Module (xCCM)
9322 dCompact digital shelf
....................................................................................................................................................................................................................................
The xCCM front panel has the following LEDs:
• Two corporate LEDs indicating the xCCM status:
Table 3-6 xCCM corporate LEDs status
• 12 tri-color LEDs (green/red/orange) indicating the SYNC, MDA, and PCM status
(four LEDs each):
Table 3-8 xCCM SYNC LEDs status
....................................................................................................................................................................................................................................
3-32 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
9322 dCompact hardware description extended Core Controller Module (xCCM)
PRELIMINARY
9322 dCompact digital shelf
....................................................................................................................................................................................................................................
Table 3-8 xCCM SYNC LEDs status (continued)
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 3-33
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact hardware description extended Core Controller Module (xCCM)
9322 dCompact digital shelf
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
3-34 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
9322 dCompact hardware description extended Core Controller Module (xCCM)
PRELIMINARY
9322 dCompact digital shelf
....................................................................................................................................................................................................................................
Table 3-12 xCCM MDA GE ports (in configuration xCCM-GE) and Ethernet ports
(mother board) LEDs
Extension interfaces
The extension interfaces are between the xCCM slot and its extension slot.
DC power
The xCCM is powered by a –48 V DC power supply through the digital backplane, and
protected against polarity inversion.
PRELIMINARY
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 3-35
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact hardware description GPxOIM module
9322 dCompact digital shelf
....................................................................................................................................................................................................................................
GPxOIM module
Introduction
The GPxOIM Field Replaceable Unit (FRU) embeds the following hardware components:
• The GPxOIM board
• A filler board
The GPxOIM mechanics housed in the digital shelf of the 9322 dCompact cabinet hosts
either a C2OIM or a C3OIM in place of the filler board. Depending on the configuration
(GPxOIM board + C2OIM or GPxOIM board + C3OIM inserted), the GPxOIM module
is called:
• GP2OIM, if C2OIM is inserted
• GP3OIM, if C3OIM is inserted
The following figure shows the front panel of the GPxOIM module (GPxOIM board +
filler board).
PRELIMINARY
....................................................................................................................................................................................................................................
3-36 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
9322 dCompact hardware description GPxOIM module
PRELIMINARY
9322 dCompact digital shelf
....................................................................................................................................................................................................................................
PRELIMINARY
The following figure shows the front panel of the GPxOIM module equipped with a
C2OIM.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 3-37
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact hardware description GPxOIM module
9322 dCompact digital shelf
....................................................................................................................................................................................................................................
The following figure shows the front panel of the GPxOIM module equipped with a
C3OIM.
....................................................................................................................................................................................................................................
3-38 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
9322 dCompact hardware description GPxOIM module
PRELIMINARY
9322 dCompact digital shelf
....................................................................................................................................................................................................................................
PRELIMINARY
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 3-39
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact hardware description Compact Optical Interface Module with connectivity for two
9322 dCompact digital shelf optical fibers (C2OIM)
....................................................................................................................................................................................................................................
Main functions
The C2OIM provides the following functions:
• Duplex electrical/optical conversion of High Speed Serial Link (HSSL) to/from the
fiber optical link
• Inventory through a Dallas one-wire bus
• Presence detection for iCCM-2
• Reporting alarms to the GPxOIM board via Dallas one-wire bus: optic transceiver Tx
Fault and Rx Los, detection of optic transceiver presence
• Laser emission on/off through a Dallas one-wire bus
• Detection of optoelectronic transceiver presence through a Dallas one-wire bus
• Optical wavelengths (Tx λ1, Rx λ2) or (Rx λ1, Tx λ2) configuration through optical
heads in Small Form-factor Pluggable (SFP) cages.
• DC fault detection through a Dallas one-wire bus
• HSSL loop-back control through a Dallas one-wire bus
The C2OIM uses two - single or dual fiber - bidirectional optoelectronic SFP transceivers
to carry duplex digital and optical communications with the RRH20-21:
• Transmit wavelength is λ1
• Receive wavelength is λ2
The C2OIM handles the optical transmission of two HSSL links in two bidirectional
optical fiber interfaces toward the RRHs.
PRELIMINARY
In downlink, for each fiber, the C2OIM receives one HSSL link from the iCCM-2. The
C2OIM sends its data stream to the optical transceiver, which converts the signal into an
optical signal.
In uplink, for each fiber, the C2OIM optical transceiver converts the optical signal into an
electrical HSSL link. The C2OIM sends the received bit stream to the iCCM-2.
....................................................................................................................................................................................................................................
3-40 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
9322 dCompact hardware description Compact Optical Interface Module with connectivity for two
PRELIMINARY
9322 dCompact digital shelf optical fibers (C2OIM)
....................................................................................................................................................................................................................................
The C2OIM has no microprocessor and no software processing capability. The C2OIM
board is remotely controlled by the iCCM-2 through the GPxOIM board on a Dallas
one-wire bus.
Hardware description
The 9322 dCompact digital shelf can host two C2OIM variants:
• C2OIM-GS: C2OIM equipped with Single-Mode (SM) SFP transceivers
This variant is dedicated to long-distance connections (up to 10 km).
The optical receiver part of SFP transceiver is connected to one fiber carrying both
downlink and uplink signals using Coarse Wavelength Division Multiplexing
(CWDM): Single-Mode optical propagation is used.
• C2OIM-GM: C2OIM equipped with Multi-Mode (MM) SFP transceivers
This variant is dedicated to short-distance connections (up to 500 m).
The optical receiver part of SFP transceiver is connected to two fibers (Multi-Mode
optical propagation is used). In this case, one fiber carries the downlink signal, and
the other one the uplink signal (main and diversity digital streams are multiplexed into
a single HSSL stream).
The C2OIM is hosted in a dedicated slot of the digital shelf (slot 7). This slot is shared
with the GPxOIM board.
The following figure shows the C2OIM-GS front panel.
PRELIMINARY
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 3-41
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact hardware description Compact Optical Interface Module with connectivity for two
9322 dCompact digital shelf optical fibers (C2OIM)
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
3-42 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
9322 dCompact hardware description Compact Optical Interface Module with connectivity for two
PRELIMINARY
9322 dCompact digital shelf optical fibers (C2OIM)
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 3-43
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact hardware description Compact Optical Interface Module with connectivity for two
9322 dCompact digital shelf optical fibers (C2OIM)
....................................................................................................................................................................................................................................
Table 3-13 C2OIM corporate LED behavior (continued)
• Two green circle shaped activity LEDs (one for transmit and one for receive),
indicating the optic link activity status for each optical fiber connected:
Table 3-14 C2OIM transceiver activity LED behavior
The C2OIM front panel also provides connectivity for two optical fibers:
• One "Optic 1" connector (Single or Dual LC connector, depending on the C2OIM
variant)
• One "Optic 2" connector (Single or Dual LC connector, depending on the C2OIM
variant)
Interface description
The C2OIM provides the following external interfaces: two 1.3 Gbit/s single- or
PRELIMINARY
dual-fiber bidirectional data links. The C2OIM is linked with the iCCM-2 by
point-to-point HSSL connections.
....................................................................................................................................................................................................................................
3-44 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
9322 dCompact hardware description Compact Optical Interface Module with connectivity for two
PRELIMINARY
9322 dCompact digital shelf optical fibers (C2OIM)
....................................................................................................................................................................................................................................
DC power
The C2OIM has its own –48 V DC power supply.
The C2OIM is protected against polarity inversion.
PRELIMINARY
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 3-45
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact hardware description Compact Optical Interface Module with connectivity for
9322 dCompact digital shelf three optical fibers (C3OIM)
....................................................................................................................................................................................................................................
Main functions
The C3OIM provides the following functions:
• Duplex electrical/optical conversion of High Speed Serial Link (HSSL) to/from the
fiber optic link
• Inventory through a Dallas one-wire bus
• Presence detection of CCM
• Reporting alarms to the GPxOIM board through a Dallas one-wire bus: optic
transceiver Tx Fault and Rx Los, detection of optic transceiver presence
• Laser emission ON/OFF through a Dallas one-wire bus
• Detection of optoelectronic transceiver presence via Dallas one-wire bus
• Optical wavelengths (Tx λ1, Rx λ2) or (Rx λ1, Tx λ2) configuration via optical heads
in Small Form-factor Pluggable (SFP) cages
• DC fault detection via Dallas one-wire bus
• HSSL loop-back control via Dallas one-wire bus
The C3OIM uses three - single or dual fiber - bidirectional optoelectronic SFP
transceivers to carry duplex digital and optical communications with the RRH20-21:
• Transmit wavelength is λ1
• Receive wavelength is λ2
The C3OIM handles the optical transmission of three HSSL links in three bidirectional
optical fiber interfaces toward the RRHs.
In downlink, for each fiber, the C3OIM receives one HSSL link from the CCM. The
PRELIMINARY
C3OIM sends its data stream to the optical transceiver, which converts the signal into an
optical signal.
In uplink, for each fiber, the C3OIM optical transceiver converts the optical signal into an
electrical HSSL link. The C3OIM sends the received bit stream to the CCM.
....................................................................................................................................................................................................................................
3-46 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
9322 dCompact hardware description Compact Optical Interface Module with connectivity for
PRELIMINARY
9322 dCompact digital shelf three optical fibers (C3OIM)
....................................................................................................................................................................................................................................
The C3OIM has no microprocessor and no software processing capability. The C3OIM
board is remotely controlled by the CCM through the GPxOIM board on a Dallas
one-wire bus.
Hardware description
The 9322 dCompact digital shelf can host two C3OIM variants:
• C3OIM-GS: C3OIM equipped with Single-Mode (SM) SFP transceivers
This variant is dedicated to long-distance connections (up to 10 km).
The optical receiver part of the SFP transceiver is connected to a fiber carrying both
downlink and uplink signals using Coarse Wavelength Division Multiplexing
(CWDM): Single-Mode optical propagation is used.
• C3OIM-GM: C3OIM equipped with Multi-Mode (MM) SFP transceivers
This variant is dedicated to short distance connections (up to 500 m).
The optical receiver part of the SFP transceiver is connected to two fibers
(Multi-Mode optical propagation is used). In this case, one fiber carries the downlink
signal, the other the uplink signal.
Main and diversity digital streams are multiplexed into a single HSSL stream.
The C3OIM is hosted in a dedicated slot of the digital shelf (slot 7). This slot is shared
with the GPxOIM board.
The following figure shows the C3OIM-GS front panel.
PRELIMINARY
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 3-47
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact hardware description Compact Optical Interface Module with connectivity for
9322 dCompact digital shelf three optical fibers (C3OIM)
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
3-48 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
9322 dCompact hardware description Compact Optical Interface Module with connectivity for
PRELIMINARY
9322 dCompact digital shelf three optical fibers (C3OIM)
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 3-49
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact hardware description Compact Optical Interface Module with connectivity for
9322 dCompact digital shelf three optical fibers (C3OIM)
....................................................................................................................................................................................................................................
Table 3-15 C3OIM corporate LED behavior (continued)
• Two green circle-shaped activity LEDs (one for transmit and one for receive),
indicating the optic link activity status for each optical fiber connected:
Table 3-16 C3OIM transceiver activity LED behavior
The C3OIM front panel also provides connectivity for three optical fibers:
• One "Optic 1" connector (Single or Dual LC connector, depending on the C3OIM
variant)
• One "Optic 2" connector (Single or Dual LC connector, depending on the C3OIM
variant)
• One "Optic 3" connector (Single or Dual LC connector, depending on the C3OIM
variant)
PRELIMINARY
Interface description
The C3OIM provides the following external interfaces: three 1.3 Gbit/s single- or
dual-fiber bidirectional data links. The C3OIM is linked with the CCM by point-to-point
HSSL connections.
....................................................................................................................................................................................................................................
3-50 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
9322 dCompact hardware description Compact Optical Interface Module with connectivity for
PRELIMINARY
9322 dCompact digital shelf three optical fibers (C3OIM)
....................................................................................................................................................................................................................................
DC power
The C3OIM has its own –48 V DC power supply.
The C3OIM is protected against polarity inversion.
PRELIMINARY
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 3-51
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact hardware description GPxOIM board
9322 dCompact digital shelf
....................................................................................................................................................................................................................................
GPxOIM board
Introduction
The GPxOIM board is embedded in the GPxOIM mechanics. It is located on the right
side of the 9322 dCompact digital shelf.
The GPxOIM board has the same functions as the GPSAM and compact GPSAM
(cGPSAM) housed in other cabinets of the Alcatel-Lucent Node B portfolio. The
GPxOIM board is similar to the cGPSAM: the same Printed-Circuit Board Assembly
(PCBA) is used. The main differences between the GPxOIM board and the cGPSAM are
the front panel height and some slight changes on serigraphy.
Main functions
The GPxOIM board performs two functions:
• Collection of the information on the state of the dCompact including alarms,
inventory and presence of FRUs, and commissioning
• Supply of timing information
Depending on the FRU, the GPxOIM board collects:
• Only the alarms
• Only the inventory information
• Both alarms and inventory information
The inventory and alarm collection process of the 9322 dCompact is based on the Dallas
one-wire bus.
Alarms, remote inventory information and commissioning information are collected
through this Dallas one-wire bus and stored by the GPxOIM board. The Dallas one-wire
bus is connected to the internal modules of the 9322 dCompact: GPxOIM, Compact
Environmental Control Unit (CECU), Universal Compact Power System (UCPS),
Compact User InterCOnnection module (C-User ICO), Manufacturing Commissioning
and Alarm module (MCA), Internal/External Alarm Module (IEAM), PCM Lightning
Protection (LPPCM) module, etc.
In this inventory and alarm collection process:
• The GPxOIM board is the hardware master on the bus, under the control of the CCM
software.
• The GPxOIM board physically drives several buses to all modules in the 9322
PRELIMINARY
....................................................................................................................................................................................................................................
3-52 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
9322 dCompact hardware description GPxOIM board
PRELIMINARY
9322 dCompact digital shelf
....................................................................................................................................................................................................................................
Hardware description
The following figure shows the front panel of the GPxOIM board.
PRELIMINARY
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 3-53
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact hardware description GPxOIM board
9322 dCompact digital shelf
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
3-54 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
9322 dCompact hardware description GPxOIM board
PRELIMINARY
9322 dCompact digital shelf
....................................................................................................................................................................................................................................
The front panel of the GPxOIM board has two corporate LEDs indicating the GPxOIM
board status.
Interface description
The GPxOIM board is connected to the CCM via the DBP402. The CCM manages the
GPxOIM board through an I2C bus and RS422 lines. RS422 lines are used for the GPS
antenna interfaces. Connection to the other main modules of the 9322 dCompact cabinet
is done through the Dallas one-wire bus for collecting alarms and inventory information.
DC power
The GPxOIM board is powered with external –48 V DC.
The maximum power is estimated at 20 W.
PRELIMINARY
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 3-55
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact hardware description Physical characteristics of the 9322 dCompact digital
9322 dCompact digital shelf modules
....................................................................................................................................................................................................................................
Module name Width (mm) Height (mm) Depth (mm) Weight (kg)
iCCM-2/xCCM 50 335 409 3.7
iCEM-2/xCEM/eCEM 50 335 409 3.3
C2OIM 25 290 409 1
C3OIM 25 290 409 1
GPxOIM = GPxOIM 50 335 409 3.5
board + filler board
PRELIMINARY
....................................................................................................................................................................................................................................
3-56 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
9322 dCompact hardware description Overview
PRELIMINARY
9322 dCompact power supply system
....................................................................................................................................................................................................................................
Overview
Purpose
This section describes how the 9322 dCompact OD AC and 9322 dCompact ID DC
cabinets are power supplied.
The Universal Compact Power System (UCPS) is responsible for the power system
operation of the 9322 dCompact OD AC variant cabinet.
In the 9322 dCompact ID DC variant cabinet, the UCPS is replaced by a DC breaker
panel.
Contents
PRELIMINARY
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 3-57
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact hardware description Universal Compact Power System (UCPS)
9322 dCompact power supply system
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
3-58 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
9322 dCompact hardware description Universal Compact Power System (UCPS)
PRELIMINARY
9322 dCompact power supply system
....................................................................................................................................................................................................................................
The following figure illustrates the architecture of the 9322 dCompact OD UCPS.
PRELIMINARY
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 3-59
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact hardware description Universal Compact Power System (UCPS)
9322 dCompact power supply system
....................................................................................................................................................................................................................................
The following figure shows the front panel of the UCPS equipped with ADU and two
rectifiers for the 9322 dCompact OD AC cabinet.
....................................................................................................................................................................................................................................
3-60 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
9322 dCompact hardware description Universal Compact Power System (UCPS)
PRELIMINARY
9322 dCompact power supply system
....................................................................................................................................................................................................................................
Figure 3-24 UCPS front panel (equipped with ADU and two rectifiers)
PRELIMINARY
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 3-61
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact hardware description AC Distribution Unit (ADU)
9322 dCompact power supply system
....................................................................................................................................................................................................................................
Main functions
The ADU provides:
• Termination for the main AC utility connection
• Means for configuring the ADU to single or split-phase
• AC power disconnect point for the Node B cabinet
• One over-current protected load circuit
• Termination points for the AC wiring inside the cabinet
• Central bonding point for AC equipment grounds
• Mounting and connections for the surge protector
• Mounting and connections for the EMI filters
• Alarms and inventory capabilities
The AC input terminal block can be adapted to two different types of AC power networks
(single-phase or split-phase).
Hardware description
The following figure shows the ADU front panel.
PRELIMINARY
....................................................................................................................................................................................................................................
3-62 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
9322 dCompact hardware description AC Distribution Unit (ADU)
PRELIMINARY
9322 dCompact power supply system
....................................................................................................................................................................................................................................
The ADU front panel also has one AC main circuit breaker (CB: 30 A).
There are no LEDs on the ADU front panel.
The ADU rear panel has one AC, DC and Control connector (Power Blade connector).
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 3-63
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact hardware description AC Distribution Unit (ADU)
9322 dCompact power supply system
....................................................................................................................................................................................................................................
Interface description
The AC main interface has the following signal assignment: single-phase (L, N, NC, PE),
split-phase (L1, L2, N, PE). The AC interface for the heater power has the following
signal assignment: L, N, PE.
Alarm collection is for GSM only. UMTS alarms are polled and reported by the GPxOIM
board on the Cabinet Control Unit (CCU).
Figure 3-26 UCPS ADU control and power signal distribution architecture
PRELIMINARY
....................................................................................................................................................................................................................................
3-64 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
9322 dCompact hardware description UCPS shelf and DC Distribution Unit (DDU)
PRELIMINARY
9322 dCompact power supply system
....................................................................................................................................................................................................................................
Main functions
The UCPS shelf provides:
• Four slots that accept and restrain FRUs including:
– One Cabinet Control Unit (CCU)
– One AC Distribution Unit (ADU)
– Up to two 1400 W rectifiers
• Input termination and distribution for either one AC feed to the rectifiers or one DC
feed
• DC collection and busing for the rectifier outputs
• Space, mounting features, and DC power and signal interconnect for the DDU
• Signal interconnect between the CCU, the two rectifiers, the ADU and the DDU
• A passive design consisting of an interconnecting backplane and metal chassis
• A standard 3U rack to allow vertical externally forced air cooling of associated FRUs
The DDU provides:
• Input terminations for DC power and CCU control signals from the UCPS shelf
• Termination and over-current protection for four DC load outputs
• Three independent on-off control circuits for the DC load outputs
• A secure disconnection threshold at 40 V DC
• Current sense (current measurement shunt and termination for a backup battery plant)
• Voltage sense (battery)
• Inventory interface
Hardware description
The following figure shows the DDU front panel.
PRELIMINARY
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 3-65
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact hardware description UCPS shelf and DC Distribution Unit (DDU)
9322 dCompact power supply system
....................................................................................................................................................................................................................................
The DDU front panel provides the following over-current protection devices for DDU DC
power outputs:
• One 40 A RF circuit breaker (RF CB)
• One 5 A fuse for the cooling unit (Cooling Fuse)
• One 20 A fuse for the digital modules and the modules in the User space (Digital
Fuse)
PRELIMINARY
....................................................................................................................................................................................................................................
3-66 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
9322 dCompact hardware description UCPS shelf and DC Distribution Unit (DDU)
PRELIMINARY
9322 dCompact power supply system
....................................................................................................................................................................................................................................
The UCPS shelf provides interconnection interface for the UCPS components:
• One connector for ADU power and control (Power Blade connector (J1))
• Two connectors for rectifier power and control (one Power Blade connector per
rectifier (J2, J3))
• One connector for CCU power and control (48-pin Metral signal pin header, pin 8B
last make, pins 3C and 3D first make (J4))
• One connector for DDU power and control (24-pin Metral signal pin header (J5))
• One connector for DDU DC power (Bus bar clearance holes for 16-mm stud (J6))
• One Protective Earth Ground (PEG) output (M5 stud (GP1))
• DDU load outputs (DC cables on backplane PCB)
The following figure illustrates UCPS shelf control, AC power and DC power signal
connection and distribution architecture.
PRELIMINARY
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 3-67
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact hardware description UCPS shelf and DC Distribution Unit (DDU)
9322 dCompact power supply system
....................................................................................................................................................................................................................................
Figure 3-29 UCPS shelf control and power signal distribution architecture
PRELIMINARY
....................................................................................................................................................................................................................................
3-68 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
9322 dCompact hardware description Rectifier
PRELIMINARY
9322 dCompact power supply system
....................................................................................................................................................................................................................................
Rectifier
Introduction
The rectifier is a bulk power supply that converts standard AC mains power into Safety
Extra Low Voltage (SELV) –48 V nominal DC output within the UCPS for powering
wireless Node B equipment and optional batteries for energy backup.
The 9322 dCompact OD cabinet provides up to two rectifiers (1+1 for redundancy, 2+0
without redundancy). Rectifier deployment depends on power requirements for the
configuration and redundancy strategy.
Main functions
The rectifier:
• Provides a digital control interface which operates with a system controller for
enhanced overall system operation
• Contains integrated AC input filtering to meet Class B EMC requirements
• Provides a Power Factor Correction (PFC) input section to ensure compliant harmonic
emissions and operation over a broad continuous AC input voltage range
• Provides rear blind-mating interconnection for all electrical interfaces
• Provides a single isolated –48 V DC nominal SELV output rated at 1400 W
continuous output power
• Provides constant output power limiting and continuous current limiting operating
characteristics and is protected for output over-current and over-voltage faults
Hardware description
The following figure shows the 1400 W rectifier front panel.
PRELIMINARY
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 3-69
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact hardware description Rectifier
9322 dCompact power supply system
....................................................................................................................................................................................................................................
The UCPS rectifier has two corporate LEDs indicating the rectifier status.
conditions.
....................................................................................................................................................................................................................................
3-70 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
9322 dCompact hardware description Rectifier
PRELIMINARY
9322 dCompact power supply system
....................................................................................................................................................................................................................................
Table 3-19 Rectifier corporate LED behavior (continued)
PRELIMINARY
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 3-71
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact hardware description Cabinet Control Unit (CCU)
9322 dCompact power supply system
....................................................................................................................................................................................................................................
Main functions
The CCU performs the following main functions:
• Rectifier module control through an I2C based digital communication interface for the
purposes of module alarm monitoring, output current monitoring, inventory
information gathering, and output voltage control
• System backup battery management for basic features such as float voltage
temperature compensation and charge current control, and advanced features such as
battery fault detection
• Rectifier output current sharing control for enhanced system performance and rectifier
reliability
• System backup battery temperature measurement for one probe
• System backup battery current monitoring through a system resistive shunt
• Communication with the Node B system controller (the CCM via the GPxOIM board)
through a Dallas one-wire interface for inventory, alarm reporting, and remote control
• System ambient temperature monitoring through a dedicated input (CEATS from the
cooling system)
Local temperature measurement (CAT) is used for alarms only.
• Node B system equipment shutdown control for protection from extreme voltage or
temperature conditions
Hardware description
The following figure shows the CCU front panel.
PRELIMINARY
....................................................................................................................................................................................................................................
3-72 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
9322 dCompact hardware description Cabinet Control Unit (CCU)
PRELIMINARY
9322 dCompact power supply system
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 3-73
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact hardware description Cabinet Control Unit (CCU)
9322 dCompact power supply system
....................................................................................................................................................................................................................................
The following table outlines CCU C1 and C2 corporate LED behavior.
C1 C2 CCU status/condition
ON OFF None of the following alarms asserted:
• CCU_FAULT
• ISEn
• BTHMn, BAT_T_Hn, BAT_T_Ln, BAT_T_DIF
• LV, HV
• HT, LT
• BOD
• BAT_BRK or LOAD_BRK
• RFAn
ON ON No CCU_FAULT alarms asserted AND one or more of the following alarms
asserted:
• ISEn
• BTHMn, BAT_T_Hn, BAT_T_Ln, BAT_T_DIF
• LV, HV
• HT, LT
• BOD
• BAT_BRK or LOAD_BRK
• RFAn
CCU initializing, indicator functionality test
OFF FLASH CCU in LCOD command mode
OFF ON CCU_FAULT alarm asserted, CCU running in application code
POST fault, CCU running in bootloader code
LCOD command process fault, CCU running in bootloader code
OFF OFF Critical CCU fault or no input power
PRELIMINARY
....................................................................................................................................................................................................................................
3-74 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
9322 dCompact hardware description Cabinet Control Unit (CCU)
PRELIMINARY
9322 dCompact power supply system
....................................................................................................................................................................................................................................
The following table gives CCU A1, A2 and A3 LED behavior.
Use of optional short backup internal battery or long backup internal battery
The CCU is configured in "battery connected" mode and "56 V Floating Reference
PRELIMINARY
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 3-75
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact hardware description Cabinet Control Unit (CCU)
9322 dCompact power supply system
....................................................................................................................................................................................................................................
When the optional long backup internal battery is used, the CCU thermal probe provides
a floating reference voltage using the usual CCU algorithm.
PRELIMINARY
....................................................................................................................................................................................................................................
3-76 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
9322 dCompact hardware description Physical characteristics of the 9322 dCompact UCPS
PRELIMINARY
9322 dCompact power supply system modules
....................................................................................................................................................................................................................................
Module name Width (mm) Height (mm) Depth (mm) Weight (kg)
ADU 69 133 359 1.9
Rectifier 1400 69 133 359 2.95
W
CCU 25 133 359 1.1
UCPS shelf + 262 133 359 4.1
DDU
PRELIMINARY
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 3-77
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact hardware description DC breaker panel
9322 dCompact power supply system
....................................................................................................................................................................................................................................
DC breaker panel
Introduction
In the 9322 dCompact ID DC cabinet, a DC breaker panel replaces the UCPS.
The 9322 dCompact ID DC internal distribution system is designed with two feeds for:
• The digital load, protected by a 20 A breaker
• The cooling system load, protected by a 5 A breaker
The following figure shows the front panel of the DC breaker panel.
Module name Width (mm) Height (mm) Depth (mm) Weight (kg)
PRELIMINARY
....................................................................................................................................................................................................................................
3-78 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
9322 dCompact hardware description Overview
PRELIMINARY
9322 dCompact cooling and heating system
....................................................................................................................................................................................................................................
Overview
Purpose
The 9322 dCompact cabinet contains a Compact Environmental Control Unit (CECU).
This unit is installed at the bottom of the cabinet and accessed through the front-hinged
access door.
Contents
PRELIMINARY
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 3-79
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact hardware description CECU components
9322 dCompact cooling and heating system
....................................................................................................................................................................................................................................
CECU components
Introduction
The CECU is composed of the following parts:
• Two speed-controllable axial DC fans
• One air inlet filter
• One temperature control sensor
• Two heaters (primary and secondary), DC powered
• Auto-reset heater thermostats
• A heater number selector
• Cable harness
• Power distribution, alarm LEDs
• Printed-Circuit Board Assembly (PCBA) for control functions, alarm LEDs and
power supply, local PUPS from 48 V DC power supply
• Inventory EEPROM and alarm collection through a Dallas one-wire interface, CEATS
signal generation for extreme temperature range emergency
The following figure illustrates the CECU functional architecture.
PRELIMINARY
....................................................................................................................................................................................................................................
3-80 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
9322 dCompact hardware description CECU components
PRELIMINARY
9322 dCompact cooling and heating system
....................................................................................................................................................................................................................................
PRELIMINARY
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 3-81
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact hardware description CECU main functions
9322 dCompact cooling and heating system
....................................................................................................................................................................................................................................
Cooling
The CECU operates by drawing in ambient air that is then routed through the electronic
equipment installed in the cabinet and ejected through outlet ducts located at the back of
the cabinet.
The CECU senses the input cabinet air temperature, and then selects the level of
environmental control necessary to maintain full operational performance of the
electronic equipment installed in the cabinet.
Heating
Heaters are present in the 9322 dCompact OD cabinet only (no heaters in the 9322
dCompact ID cabinet).
In the 9322 dCompact OD AC cabinet, the two heaters are DC powered by the ADU.
Both heaters are dimensioned to dissipate 890 W maximum at the minimum input voltage
value.
For low external ambient air temperatures, the CECU control PCB regulates the action of
the primary and/or secondary heater circuits to maintain the internal cabinet air
temperature above +5°C.
It is possible to turn ON/OFF the heaters depending on the desired operating temperature
range and maximum site input current.
With two heaters, the cabinet can start up and operate down to –33°C. Without heaters,
the cabinet can start up and operate down to –5°C.
....................................................................................................................................................................................................................................
3-82 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
9322 dCompact hardware description CECU main functions
PRELIMINARY
9322 dCompact cooling and heating system
....................................................................................................................................................................................................................................
PRELIMINARY
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 3-83
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact hardware description CECU inventory and alarms
9322 dCompact cooling and heating system
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
3-84 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
9322 dCompact hardware description CECU hardware
PRELIMINARY
9322 dCompact cooling and heating system
....................................................................................................................................................................................................................................
CECU hardware
Description
The following two figures show the front panels of the CECU, with and without heaters.
Figure 3-35 CECU front panel (with heaters - 9322 dCompact ODAC cabinet)
PRELIMINARY
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 3-85
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact hardware description CECU hardware
9322 dCompact cooling and heating system
....................................................................................................................................................................................................................................
Figure 3-36 CECU front panel (without heaters - 9322 dCompact ID DC cabinet)
....................................................................................................................................................................................................................................
3-86 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
9322 dCompact hardware description Physical characteristics of the 9322 dCompact CECU
PRELIMINARY
9322 dCompact cooling and heating system components
....................................................................................................................................................................................................................................
PRELIMINARY
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 3-87
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact hardware description Overview
User racks
....................................................................................................................................................................................................................................
User racks
Overview
Purpose
This section describes the user racks of the 9322 dCompact cabinet.
Contents
....................................................................................................................................................................................................................................
3-88 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
9322 dCompact hardware description User racks
PRELIMINARY
User racks
....................................................................................................................................................................................................................................
User racks
Main functions
Horizontal user racks (standard 19-inch 2U + 9.5-inch 2U) are available for user-specific
modules inside the 9322 dCompact cabinets. They are –48 V DC powered and alarmed.
Front panel
The following figure shows a front view of the 19-inch 2U user rack.
User rack 19-inch rack 2 x 44.45 482.6 < 470 < 4 (per
(2U) 1U)
9.5-inch rack 2 x 44.45 241.3 < 470 <4
(2U)
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 3-89
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact hardware description Overview
....................................................................................................................................................................................................................................
Overview
Purpose
This section describes the Manufacturing, Commissioning and Alarm (MCA) module.
Contents
....................................................................................................................................................................................................................................
3-90 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
9322 dCompact hardware description Manufacturing, Commissioning and Alarm (MCA) module
PRELIMINARY
Manufacturing, Commissioning and Alarm (MCA) module
....................................................................................................................................................................................................................................
Main functions
The MCA module incorporates three 4K memory modules for storing inventory data, as
well as installation and commissioning parameters.
It also connects internal alarms (a maximum of 16). These are simple contacts, with one
side connected to ground and the other side connected to the Dallas bus, so that the
GPxOIM board can collect alarm information.
This MCA module can be programmed on site at the manufacturing, pre-commissioning,
or installation stage.
The MCA module stores two types of information:
• Inventory information
Manufacturing-related build data is programmed during the manufacturing stage.
Additional site-related data can either be programmed at the pre-commissioning or
installation stage.
Information stored includes:
– RU parameter
– PEC
– Serial number
– Manufacturing date
– Hardware release
– Last-in-service date
– Site location parameter
• Installation and commissioning parameters
Site-related data is either programmed at the pre-commissioning or installation stage.
Information stored includes:
– Node B parameter record: site mode (GSM, UMTS), packaging (indoor, outdoor,
etc.)
– Backhaul record: type of incoming link (PCM, STM1), number of PCMs, number
PRELIMINARY
of STM1 ports
– PCM parameter record: PCM type (E1/T1), PCM frame if T1 (SF, ESF), PCM
coding if T1 (AMI, B8ZS), PCM CRC (used, not used), PCM LBO if T1, PCM
receive sensitivity, PCM E1 CRC threshold, PCM T1 CRC threshold
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 3-91
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact hardware description Manufacturing, Commissioning and Alarm (MCA) module
Manufacturing, Commissioning and Alarm (MCA) module
....................................................................................................................................................................................................................................
– Address record: existence of a DHCP server (yes, no), IP address of the Node B,
IP address of the OMC-B, VP/VC of the OMC-B, sub-network mask, client
DHCP port, server DHCP port, Network Element Identifier
– IMA group record: IMA used/not used, IMA 0 group id, mask of PCM in IMA 0
group
Hardware description
The following figure shows the MCA module front panel.
....................................................................................................................................................................................................................................
3-92 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
9322 dCompact hardware description Overview
PRELIMINARY
9322 dCompact optional equipment
....................................................................................................................................................................................................................................
Overview
Purpose
This section describes the optional equipment supported by the 9322 dCompact cabinet:
• Rectifier 1400 W (refer to “Rectifier” (p. 3-69))
• Compact User InterCOnnect (C-User ICO) module
• Internal battery backup
Two types of optional internal batteries are available:
– Short backup time internal battery (for 9322 dCompact OD AC cabinet)
– Long backup time internal batteries (for 9322 dCompact OD AC cabinet)
• PCM Lightning Protection (LPPCM) module
• Internal/External Alarm Module (IEAM)
• 75-ohm kit
• DC lamp
This list is not exhaustive. This section does not provide information on ancillaries (cable
kits and installation sets).
Contents
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 3-93
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact hardware description Compact User InterCOnnect (C-User ICO) module
9322 dCompact optional equipment
....................................................................................................................................................................................................................................
Main functions
The C-User ICO module is required when user-specific modules are installed in the User
rack.
The C-User ICO module:
• Protects the user modules
• Distributes DC power to user modules
• Collects alarms from user modules
Hardware description
The following figure shows the front panel of the C-User ICO module.
• Four standard fuses: Little fuse™ 2.5A: T 2.5A 48V (slow blow), 5x32 type
Each power connection (–48 V DC) is protected by a 2.5 A fuse. It is possible to
change the value of each fuse (maximum value of 6.3 A), but the sum of the four
values must not exceed 10 A maximum.
....................................................................................................................................................................................................................................
3-94 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
9322 dCompact hardware description Compact User InterCOnnect (C-User ICO) module
PRELIMINARY
9322 dCompact optional equipment
....................................................................................................................................................................................................................................
• Three alarm connectors:
– "User Alarm": 9-pin D-SUB female connector, to which customer equipment
alarms are connected
– "UMTS Alarm": 9-pin D-SUB female connector, connected to GPxOIM board for
UMTS system alarm collection
– "GSM Alarm": 9-pin D-SUB female connector, unused
A maximum of four alarms can be processed for fault management.
Pin Signal
1 unused
2 unused
3 Alarm 4
4 Alarm 3
5 Alarm 2
6 Alarm 1
7 GND
8 GND
9 GND
Alarms 1 to 4 of the User Alarm connector are connected by the C-User ICO to the
UMTS alarms collected via the GPxOIM board (on the one-wire bus).
Pin Signal
PRELIMINARY
1 1_WIRE_BTS_INT (Bus 1)
2 1_WIRE_BTS_INT (Bus 1)
3 GND
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 3-95
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact hardware description Compact User InterCOnnect (C-User ICO) module
9322 dCompact optional equipment
....................................................................................................................................................................................................................................
Table 3-27 UMTS Alarm pin connections (continued)
Pin Signal
4 NC (no connection)
5 +5V
6 NC
7 NC
8 NC
9 NC
PRELIMINARY
....................................................................................................................................................................................................................................
3-96 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
9322 dCompact hardware description Short backup internal battery
PRELIMINARY
9322 dCompact optional equipment
....................................................................................................................................................................................................................................
Main functions
One Intensium 1 Power 1500 Lithium-Ion smart battery module can be hosted in a slot
(height 1U, width 1/2 19 inches) and provides limited backup time.
The internal battery is plugged on the 48 V bus of the energy system. It is protected by its
own breaker.
Battery charge is done under UCPS management at power up when the rectifiers DC
output ramp up is performed and by the battery current limitation integrated in the
internal battery.
To optimize the battery backup time when this option is selected, the CCU provides 56 V
floating reference voltage to the battery regardless of the temperature.
If the AC source or the rectifiers fail, the battery automatically turns on discharge.
The UCPS manages low voltage load disconnection:
• RF (RRH) load disconnected at 44 V threshold
• Other loads (digital and cooling system) disconnected at 42 V
The battery includes a self-disconnection feature at extreme voltage discharge.
The battery has four operating modes:
• Charge mode
• Discharge mode
• Sleep mode
• Floating mode
The following figure shows the distribution system architecture for the short backup
internal battery.
PRELIMINARY
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 3-97
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact hardware description Short backup internal battery
9322 dCompact optional equipment
....................................................................................................................................................................................................................................
Figure 3-40 Distribution system architecture for short backup internal battery
Hardware description
The following figure shows the Intensium 1 Power 1500 front panel.
....................................................................................................................................................................................................................................
3-98 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
9322 dCompact hardware description Short backup internal battery
PRELIMINARY
9322 dCompact optional equipment
....................................................................................................................................................................................................................................
On the Intensium 1 Power 1500 front panel, the SOH (State of Health) and SOC (State of
Charge) push buttons display the state of the battery.
When the SOH push button is activated, the LED gives the battery's SOH:
• If LED 2 is red, then a weak SOH condition is detected.
• If LED 2 is green, then a good SOH condition is detected.
When the SOC push button is activated, the four LEDs give the SOC (%) as follows:
• LED 1 is ON if SOC > 10%
• LED 2 is ON if SOC > 30%
• LED 3 is ON if SOC > 60%
• LED 4 is ON if SOC > 90%
If no push button is activated, LEDs 1, 2, and 3 are managed according to the battery
mode and alarms, as shown in the following table.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 3-99
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact hardware description Short backup internal battery
9322 dCompact optional equipment
....................................................................................................................................................................................................................................
The Intensium 1 Power 1500 front panel also provides:
• Two "COM" connectors (D-SUB 9-pin male and female connectors) used for alarm
and communication connection
• A "POWER" on/off switch
The following table shows the pin numbers and the corresponding signals for the "COM"
Alarm connectors.
Pin Signal
1 Major alarm
2 Reserved
3 Reserved
4 Minor alarm
5 Reserved
6 Reserved
7 Reserved
8 Alarm reference
9 Reserved
The Intensium 1 Power 1500 rear panel has one power connector (Dual Power connector)
that provides a 48 V bus connection with the energy system.
Interface description
The internal battery generates two alarms ("minor" and "major"), collected by the
GPxOIM board through a one-wire interface.
Backup time
The following table gives the backup time for the Intensium 1 Power 1500 Lithium-Ion
battery with a 57 V initial charge, until the 42 V disconnection threshold is reached. This
is based on typical DC power consumption of the dCompact.
....................................................................................................................................................................................................................................
3-100 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
9322 dCompact hardware description Long backup internal batteries
PRELIMINARY
9322 dCompact optional equipment
....................................................................................................................................................................................................................................
Main functions
The 9322 dCompact cabinet can be equipped with optional long backup time internal
batteries, in a dedicated space on the right of the digital shelf.
These batteries consist of four SBS 40 batteries. They are connected in series to provide
–48 V DC. They are plugged into the 48 V bus of the UCPS DDU. Battery charge is made
under UCPS management at power up, when rectifiers DC output ramp up is performed.
To optimize battery backup time when this option is selected, the CCU provides a floating
voltage to the batteries according to temperature. The batteries include a self
disconnection feature at extreme voltage discharge.
The following figure illustrates the distribution system architecture for the long backup
internal batteries.
Figure 3-42 Distribution system architecture for long backup internal batteries
PRELIMINARY
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 3-101
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact hardware description Long backup internal batteries
9322 dCompact optional equipment
....................................................................................................................................................................................................................................
Interface description
The long internal batteries generate alarms collected by the GPxOIM board through a
one-wire interface.
Backup time
The following table gives the backup time for the SBS 40 battery with a 57 V initial
charge, until the 42 V disconnection threshold is reached. It is based on typical DC power
consumption of the dCompact.
....................................................................................................................................................................................................................................
3-102 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
9322 dCompact hardware description Internal/External Alarm Module (IEAM)
PRELIMINARY
9322 dCompact optional equipment
....................................................................................................................................................................................................................................
Hardware description
The following figure shows the IEAM front panel.
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 3-103
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact hardware description Internal/External Alarm Module (IEAM)
9322 dCompact optional equipment
....................................................................................................................................................................................................................................
• Two "Internal Alarm Bus" connectors (9-pin D-SUB male and female connectors) to
connect the alarm bus cables (Internal Alarm Bus Out/In)
• One ground connector
PRELIMINARY
....................................................................................................................................................................................................................................
3-104 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
9322 dCompact hardware description PCM Lightning Protection (LPPCM) module
PRELIMINARY
9322 dCompact optional equipment
....................................................................................................................................................................................................................................
Main functions
The LPPCM module provides lightning protection for the PCM link.
Hardware description
The following figure shows the front panel of the LPPCM module.
The front panel of the LPPCM module has the following connectors:
• One 44-pin High Density D-SUB male connector to connect the module to the
iCCM-2/xCCM (EQUIPMENT)
• One 9-pin D-SUB female connector to connect the alarm bus cable (BUS)
• One 44-pin High Density D-SUB female connector for PCM connection (LINE)
• One ground connector
PRELIMINARY
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 3-105
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact hardware description 75-ohm kit
9322 dCompact optional equipment
....................................................................................................................................................................................................................................
75-ohm kit
Description
The PCM cables are connected to the Iub port on the Node B bulkhead and to the
distribution frame. This distribution frame is a connection point between the PCM cable
from the Node B and the transmission network.
For a 120-ohm telecommunication network, only the 120-ohm PCM cable is needed for
PCM connection.
For a 75-ohm telecommunication network, it is necessary to have baluns (two baluns per
PCM) to ensure adaptation from the 120 ohms of the Node B to the 75 ohms of the
customer network. The 120/75-ohm adaptive baluns should be secured as close as
possible to the specific distribution frame. Three types of baluns can be used: BNC,
1.6/5.6, or SMZ type 43.
The following figure shows the three types of baluns available.
....................................................................................................................................................................................................................................
3-106 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
9322 dCompact hardware description DC lamp
PRELIMINARY
9322 dCompact optional equipment
....................................................................................................................................................................................................................................
DC lamp
Description
As an option, a DC lamp can be used to illuminate the 9322 dCompact cabinet for
maintenance tasks performed at night or at low lighting levels. Its DC power consumption
is 11.5 W. The DC lamp is located in the upper part of the 19-inch 2U user rack.
PRELIMINARY
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 3-107
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY 9322 dCompact hardware description Physical characteristics of the 9322 dCompact optional
9322 dCompact optional equipment equipment
....................................................................................................................................................................................................................................
Module name Width (mm) Height (mm) Depth (mm) Weight (kg)
Compact User 228 44 - 1
ICO
Short backup 269.4 44 350 4.5
internal battery
(Intensium 1
Power 1500)
Long backup 97 206 250 12.7 (per unit)
internal battery 50.8 (for the
(SBS 40) complete string
of four SBS 40
batteries)
IEAM 228 44 170 1
LPPCM 228 44 170 1
DC lamp - - - 0.3
PRELIMINARY
....................................................................................................................................................................................................................................
3-108 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
PRELIMINARY
4 Using the TIL tool
4
Overview
Purpose
This chapter describes the Local Installation Terminal (TIL).
Contents
PRELIMINARY
...................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary 4-1
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY Using the TIL tool Using the TIL tool
....................................................................................................................................................................................................................................
TIL functions
The TIL provides the following functions:
• Displays the existing hardware of the equipment
• Automatically displays new hardware
• Basic maintenance and test capabilities for equipment modules
• Saves reports (including alarm, test reports) on a laptop
• Retrieves the hardware and software module configuration
• Configures commissioning parameters
If the CCM module hosted in the Then the TIL is connected to the...
equipment is a...
CCM/iCCM/iCCM-U/iCCM-2 Ethernet port 2 of the CCM module
xCCM/xCCM-U/eCCM-U Ethernet port 1 of the CCM module
• Remote connection
In this mode, the TIL is connected to a LAN/WAN network. This connection is
available only if the equipment is integrated in the UMTS network and active (not
locked).
The connection can be checked by doing a ping [IP address] command.
For more information, see Alcatel-Lucent 9100 and 93xx Node B – Commissioning and
Fault Management User Manual: TIL, 9YZ-04088-0090-PCZZA.
PRELIMINARY
....................................................................................................................................................................................................................................
4-2 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
PRELIMINARY
Appendix A: Document issue
history
Overview
Purpose
This appendix provides reference material for this document.
Contents
PRELIMINARY
...................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary A-1
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY Document issue history Reissue history
....................................................................................................................................................................................................................................
Reissue history
Purpose
The reissue history of this document is described in the following paragraphs.
....................................................................................................................................................................................................................................
A-2 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
Index
PRELIMINARY
Numerics battery, short backup, 3-75
75-ohm kit, 3-106 architecture, 3-97
9322 dCompact backup time, 3-100
benefit, 2-2 dimension and weight, 3-108
digital shelf module, 3-11 front view, 3-98
functional architecture, 3-10 function, 3-97
introduction, 2-2 hardware description, 3-98
................................................................................................ LED, 3-99
A AC Distribution Unit (ADU) bulkhead
architecture, 3-64 interface, 3-4
dimension and weight, 3-77 top view, 3-4
front view, 3-62 ................................................................................................
ADU C2OIM
See: AC Distribution Unit (ADU) See: Compact Optical Interface Module with
connectivity for two optical fibers (C2OIM)
alarm management, 3-52
C3OIM
alarm/remote control interface, 2-8 See: Compact Optical Interface Module with
................................................................................................ connectivity for three optical fibers (C3OIM)
B balun cabinet
See: 75-ohm kit compartment layout, 3-2
battery, long backup, 3-75 dimension and weight, 2-12
PRELIMINARY
....................................................................................................................................................................................................................................
Cabinet Control Unit (CCU) Compact User InterCOnnect (C-User ICO), 2-8
dimension and weight, 3-77 dimension and weight, 3-108
front view, 3-72 front view, 3-94
function, 3-72 function, 3-94
LED, 3-74 hardware description, 3-94
call processing (CallP), 2-5 cooling system
See: Compact Environmental Control Unit (CECU)
CallP
See: call processing (CallP) ................................................................................................
CCU D DC breaker
See: Cabinet Control Unit (CCU)
dimension and weight, 3-78
CECU
See: Compact Environmental Control Unit (CECU) front view, 3-78
....................................................................................................................................................................................................................................
IN-2 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014
Index
PRELIMINARY
....................................................................................................................................................................................................................................
port, 3-18 IEEE 1588v2 PTP
See: synchronization
extended Core Controller Module (xCCM)
integrated Channel Element Module - 2nd generation
dimension and weight, 3-56
(iCEM-2), 3-13
E1/T1 MDA, 3-28
dimension and weight, 3-56
function, 3-28
front view, 3-13
GE MDA, 3-28
function, 3-13
hardware description, 3-28
hardware description, 3-13
LED, 3-32
LED, 3-16
port, 3-29
integrated Core Controller Module - 2nd generation
xCCM-4E1 front view, 3-29 (iCCM-2)
xCCM-GE front view, 3-30 7-segment display description, 3-26
................................................................................................ dimension and weight, 3-56
....................................................................................................................................................................................................................................
Alcatel-Lucent 9322 dCompact Alcatel-Lucent – Proprietary IN-3
3MN-00480-0001-DEZZA Use pursuant to applicable agreements
Issue 0.02 February 2014
PRELIMINARY Index
....................................................................................................................................................................................................................................
function, 3-91 ................................................................................................
................................................................................................ ................................................................................................
xCEM
See: rectifier See: extended Channel Element Module (xCEM)
See: UCPS
....................................................................................................................................................................................................................................
IN-4 Alcatel-Lucent – Proprietary Alcatel-Lucent 9322 dCompact
Use pursuant to applicable agreements 3MN-00480-0001-DEZZA
Issue 0.02 February 2014