Академический Документы
Профессиональный Документы
Культура Документы
V10
Release Notes
Version Number: V10
June 2017
Copyright (c) 2017 by Aspen Technology, Inc. All rights reserved.
Aspen Petroleum Supply Chain, Aspen PIMS, Aspen Unified PIMS, Aspen Petroleum Scheduler, Aspen Refinery
Multi-Blend Optimizer, Aspen Report Writer, Aspen Refinery Report, Aspen Excel Integration Utility and the aspen
leaf logo are trademarks or registered trademarks of Aspen Technology, Inc., Bedford, MA.
All other brand and product names are trademarks or registered trademarks of their respective companies.
This document is a guide for using AspenTech's software. This documentation contains AspenTech proprietary and
confidential information and may not be disclosed, used, or copied without the prior consent of AspenTech or as set
forth in the applicable license agreement. Users are solely responsible for the proper use of the software and the
application of the results obtained.
Although AspenTech has tested the software and reviewed the documentation, the sole warranty for the software
may be found in the applicable license agreement between AspenTech and the user. ASPENTECH MAKES NO
WARRANTY OR REPRESENTATION, EITHER EXPRESSED OR IMPLIED, WITH RESPECT TO THIS
DOCUMENTATION, ITS QUALITY, PERFORMANCE, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR
PURPOSE.
Known Issues........................................................................................................21
Aspen PIMS ................................................................................................... 21
Advanced Optimization Perform Option Clarification.................................. 21
Aspen Unified PIMS ........................................................................................ 21
Installation on a Non-Domain Environment.............................................. 21
Submodel Unit Simulations.................................................................... 21
Running Large Number of Cases (>1000) Fails ........................................ 21
AUP Assay Management – Use of Custom Tags for Pure Components.......... 22
Custom Splitter Towers Display Incorrectly.............................................. 22
Aspen Assay Management ............................................................................... 22
Selection of Incorrect Temperature Units May Cause Invalid Results or Crash22
Aspen Petroleum Scheduler (APS) and Aspen Refinery Multi-Blend Optimizer (MBO)23
Access Models...................................................................................... 23
Use of USE_LOG_UTC flag and Concurrent Users...................................... 23
Aspen Petroleum Scheduler ............................................................................. 23
User without access rights can modify control variable list on an event screen23
Aspen EIU – Importing volume based inventory in the weight based model . 24
Build Ref tab on Submodel Dialog – Display issues ................................... 24
These Release Notes describe the Aspen Petroleum Supply Chain (PSC) V10
family of products which includes Aspen PIMS, Aspen Petroleum Scheduler,
Aspen Olefins Scheduler, Aspen Refinery Multi-Blend Optimizer, Aspen Report
Writer and Aspen Blend Controller Interface. This document includes:
New features
Known Issues
Related Documentation
In addition to these Release Notes, AspenTech provides the following
documentation for the Aspen Petroleum Supply Chain V10 family of products:
Aspen Petroleum Supply Chain Installation Guide
Aspen PIMS Integration – User Guide
Aspen Petroleum Scheduler Integration – User Guide
Aspen Refinery Multi-Blend Optimizer Integration – User Guide
Aspen PIMS Help
Aspen Unified PIMS Help
Aspen Petroleum Supply Chain Planner Help
Aspen Petroleum Scheduler Help
Aspen Refinery Multi-Blend Optimizer Help
Aspen Report Writer Help
Aspen Blend Controller Interface Help
This section describes the new features in the Aspen Petroleum Supply Chain
family of products. Products that are not specifically listed indicate there
were no major feature changes to these products included in this release.
Aspen PIMS
The following enhancements and improvements are included in the V10
release of PIMS:
Aspen PIMS Platinum has been subsumed into Aspen Unified PIMS and
can no longer be accessed directly from PIMS
PIMS EE has been sunset.
New MIP Setting
The Enable MIP Warm Start setting has been added on to the MIP
options tab of the Xpress L.P. Model Settings dialog box. This setting
helps to improve efficiency (speed) of MIP runs, especially for large MIP
models by warm-starting the first MIP iteration from the state of the MIP
variables in the input solution.
New TRANCOL options
o V10 now allows generation of TRANCOL reports for PIMS-AO
executions. These reports can be viewed using the new AO Marginal
Analysis Viewer which allows you to perform what-if scenarios by
seeing results when swapping independent and dependent variables.
o The Create XLPTC File option has been added that allows you to
generate a TRANCOL file without writing to the database, thus saving
valuable storage space.
Assay Table Spreadsheet
The ASSAYS input spreadsheet has been added to the Model Tree
Tables tab. You can perform standard spreadsheet operations on the
ASSAYS spreadsheet from the Navigation tree as well as through the
Assay Management system.
New Automation Method
The automation method RunParametricAnalysis has been added that
allows you to run Parametric Analysis.
UserCalc Modifications
Now supported for Dock Scheduling Crude Receipt, Non-crd
Rcpt (PRODRCPT) and Product Shipment events. Pipeline
Scheduling events regarding receipts and shipment also support
UserCalc.
Route input section has been added
on CRDRCPT, PRODRCPT and PLSHIP UNITS worksheets to handle route
input, displacement segment , displacement tanks and forward rate input.
Show Number
with Arrow Displays numbers with Transport and Segment
lines.
For transport lines costs are displayed
For segment lines, total used capacity
for the associated segments is displayed.
Show Cost Shows the cost associated with the transport arc.
(Transport Option is disabled if Show Number with
Only) Arrow is not selected.
Show Total Shows total cost as well as activity total for
Cost activities; if not selected, does not show cost
totals; cost totals are always on a total basis
and can be in the form of total spending or total
revenue depending on the active view (e.g, which
tab is selected). Total costs appear in
the Summation toolbar area.
Show Empty Show all nodes even if they are empty and
Unlinked unlinked. If not selected, empty and unlinked
nodes are hidden.
Find All Shows all connections from a selected node to a
Connections destination, including all intermediaries; the full
path for a particular node are shown. If this option
is not selected, only the direct links to/from a
selected node are visible.
Highlight Available only when comparing cases. Show only
Material with materials where values are different, in other
Differences words where non-zero changes occur.
Aggregate Available only when comparing cases. Display
Real Numbers numbers as real values, not absolute values, thus
displaying the actual change in total volume; if
option not selected, values appear as absolute
numbers.
Petroleum Supply Chain V10 Suite applications include several software fixes
that further improve the product. This section summarizes those fixes.
Aspen PIMS
This section describes the software fixes to PIMS.
id Headline
CQ00457301 Property Transfer Failure in the Global Optimization
CQ00469565 Different row status for CCAPAT1 row if multistart is ON or OFF
CQ00471567 Case solves differently using multi-start when solved alone vs
when solved with case stack
CQ00478769 Unexpected W904 and W915
CQ00486190 Error in Viscosity Reporting of Streams
CQ00492982 DR Model won't generate - creating illegal characters to handle
VPRICE entries
CQ00507241 MPIMS Model crashes on XNLP\XLP when runs out of memory
CQ00511507 Inconsistent ABML performance
CQ00511806 Discrepancy between Multistart and regular run report
CQ00520759 MIP convergence issue
CQ00535598 Error when using multi-processing
CQ00579799 Trancol and Sensitivity Analysis is not available in PIMS-AO
CQ00615737 Need a way to set and save preferred setting for different
types of PIMS AO runs
CQ00675449 Model Archive issue
CQ00687084 Unable to generate .txt report for local model
CQ00688992 Index out of bounds
CQ00689485 Different behavior of Eps in CaseParallel with LOADSOL
CQ00692303 Clean up functions in SQL DB (similar to access database -
user login specific) - UC02
CQ00692604 No diagnosis message in .xlr file for Infeasible problem with
Multi Start in V8.7 CP9
CQ00692984 Stop/cancel case runs by users at any time
ID Headline
CQ00605833 Enable option to generate cutting results for all crudes or modified
crudes
CQ00697891 Fix issue on copying GC data from excel and pasting to GC input
form.
CQ00742492 Fix issue on RVP calculations for crude blending
CQ00753144 Fix issue on adding new crudes and deactivating existing crudes at
the same time in the PIMS Assay Table
ID Headline
CQ00709378 Material Pool Trend Limits are being corrupted when a material
pool is build from pure streams
CQ00711445 Links to Dock events disappear on copying to new case
CQ00715268 Event conflicts shown against linked pipeline events
CQ00715271 Sum of Components dont add up to 100%
CQ00719782 Save button issue on unchanged events
CQ00724400 Quantity dependent event with start link creates save errors.
CQ00724610 After deleting a case, entries in the publish tables for that case are
not being deleted
CQ00724895 APS losing start links
CQ00725216 Circular link bug in 8.8
CQ00725945 Trends are not properly refreshed when I hit MAX VOL through
Right Click Max VOL for the Crude Run Event
CQ00726564 APS changing Min Max values for quantity dependent events with a
start link
CQ00727258 Misleading Dialog Box while switching cases of a Non-Dock model.
CQ00729254 V8.8 unnecessary tables updates
CQ00729456 Min/Max limits set on pool definition are not respected 8.8
CQ00730131 Additional entries into the ATOrionEventResources table for
product pipeline events
CQ00730559 EventsColl Remove Automation Call
CQ00732932 Issue With MaxVol On a particular Crude Run event
CQ00733108 Critical issue - _Crude_XREF table
CQ00733944 Event Import will crash after importing a second data source
CQ00740893 Long labels are offset in the blend details window
CQ00743047 V7.3 imports always in volume, 8.8 looks at crude basis
CQ00744218 APS Audit Changes functionality not as designed for Import
Events on Unit Operations
CQ00745886 Parameter baseline is not read if the model has offset hours
CQ00749740 Units Workbook Creates Trendline that causes issues
ID Headline
CQ00496505 Horizontal zoom on the Gantt chart cannot be smaller than a
day. Provide a smaller limit, like 4 hours
CQ00554590 PROP_BAL table failed to store data: Cannot insert explicit
value for identity column
CQ00594468 ethanol% should be available for all Gasoline Types
CQ00698675 Cannot set Default Composition for a product
CQ00707371 Published events remain after event is deleted and schedule is
republished
CQ00707590 MBO component rundown - values changing
CQ00710629 MBO "Component Rundowns..." "Copy from APS" incorrect for
tanks
CQ00715888 Linked events not properly processed by the
Integration/Import/Events display.
CQ00732916 How to use a material pool for blend component in MBO and
maintain correct inventory
CQ00735152 MBO crashes when optimizing blend rundown events in Blend
Group
CQ00741087 PimsBci.bci fails to connect to SQL Server DB
CQ00751491 Issue after importing events
ID Headline
CQ00710740 Report Writer Issue with Macros/Excel (Office 2016)
code
CQ00732312 ARW issue with changes to template
CQ00733968 APS reports are not working
ID Headline
CQ00477752 DPO Case comparison feature should have a switch to limit
displayed differences to column/row activity values
CQ00701181 A bug while sorting DJ column in Results Window
CQ00731237 Add new automation property to return full DB path
CQ00734688 Make the box-zooming option more discover-able to the
user
CQ00739246 Matrix structure and associated warning are not correct
CQ00757321 Results window map occasionally lock up and show an error
message
CQ00757936 New map gets a makeover after clicking the "Leaflet" or
"Esri" link in the lower right corner of the map view
CQ00759354 PSCP registry entries from older version didn't get cleaned
after software uninstall
This section covers known issues associated with the Petroleum Supply Chain
V10 release. Issues are organized by product.
Aspen PIMS
Advanced Optimization Perform Option
Clarification
For Perform options associated with AO functions, only execution results
associated with the currently requested function is displayed. All other AO
execution results are not included. To see all results, use the View option.
Note: The steps below will work for both 32 or 64 bit versions of Office 365.
If running the 64 bit version of Office 365, another option is to create a DSN
for each database and skip the steps below.
Please follow the steps below:
1 Download the Microsoft Access Database Engine 2010 Re-
distributable from the following location:
http://www.microsoft.com/en-
us/download/details.aspx?displaylang=en&id=13255
Click Download and select AccessDatabaseEngine.exe.
2 Click Next to start the download process. The executable can be found in
your Downloads folder.
3 Once downloaded, install AccessDatabaseEngine.exe by right-clicking
and selecting “Run as Administrator”. Follow the instructions. You can
also run the installation by double-clicking on the file.
The installation installs an associated driver that you can see under
Control Panel | Programs | Programs and Features.
Example: Microsoft Access database engine 2010
After completing the steps above, you will be able to open .mdb databases
through the application.
Aspen RenameTags
Use of Aspen RenameTags.exe is not supported in this release. Changing
tags using RenameTags may not consistently modify all tags in all tables.