Академический Документы
Профессиональный Документы
Культура Документы
Of
"Information Technology & Electronics System Maintenance"
(SEMESTER PATTERN)
Under
CRAFTSMAN TRAINING SCHEME
Designed in : 2013
By
Government of India
CENTRAL STAFF TRAINING AND RESEARCH INSTITUTE
Directorate General of Employment & Training
Ministry of Labour & Employment
EN-81, SECTOR-V, SALT LAKE CITY
KOLKATA-700091
List of Members of trade Committee Meeting for the trade of "Information Technology & Electronics
System Maintenance" held on 14.12,2005 at CSTARI, Kolkata.
8. Instructors’/trainers Qualification :
a) B.E./B.Tech in Electronics/Electronics & Telecommunication
with one yrs. experience in the relevant field
OR
Diploma in Electronics/Electronics & telecommunication/from
recognized board of technical education with two years experience in the
relevant field.
OR
NTC/NAC in the trade with three years or four years experience respectively in the relevant field
9. Desirable qualification : (b) Preference will be given to a candidate with Craft Instructors Certificate (CIC).
Note: At least one Instructor must have Degree / Diploma in the relevant field.
SYLLABUS FOR THE TRADE OF
"INFORMATION TECHNOLOGY AND ELECTRONICS SYSTEM MAINTENANCE (IT&ESM)"
UNDER CTS
4 Familiarize with the lead acid Lead acid cell, its construction -do- -do-
battery, Charging of batteries,and chemical changes during
Series parallel connection of charging and discharging.
batteries. Battery charging methods.
Maintenance free batteries.
Lithium cell, Ni-cad cells their
construction and applications.
5 Measurement of Inductance in Magnetism and Electro- Free hand Electricity:
various circuits, Flux adding, magnetism. Faraday's law of sketching of Negative &
flux canceling connections. electromagnetic induction, Self tools, reading positive
induction, Mutual Induction, of simple polarities,
Hysteresis curve of magnetic
materials. drawings and structure of
concepts of Atoms,
dimensions Electrons &
and dotted protons,
lines, chain coulomb, unit of
lines etc. charge, volt, unit
Magnifying of potential
glass. difference, and
charge in motion
is current.
15 Measure the peak value, peak CRO- block : diagram, Working -do- Parallel circuits:
to peak value, Find out the rms principle of CRT, Functions of Applied voltage
value, measure the DC voltage, X-shift, Y-shift controls, is the same
Measure the time and find out time/div controls, Internal across parallel
the frequency using CRO. triggering and external branches, Each
triggering. Use of CRO for the branch current,
measurement of AC voltage, DC Total current
voltage, time and frequency.
equal to the sum
of the branch
currents.
16 Forward and reverse Semi conductors, Intrinsic and Diagram of PN Find the average
characteristics of PN junctionExtrinsic semiconductor, junctions, DC in Half, Full
diode. Diode as a rectifier. Majority carrier, Minority forward bias wave rectifier
carrier, P type, N type. PN and reverse circuits with
junction diode, forward bias circuit. filter and
characteristics and reverse without filter.
characteristics. Rectification,
Diodes in series and in parallel.
17 Measure the voltage and Half wave rectifier, Full wave Parallel Resistance in
observe the output wave forms rectifier and bridge rectifier their circuits, parallel circuits,
of Half wave, Full wave and construction, working and Branch Total power in
Bridge rectifier circuits. output. Filter circuits, Capacitor currents, parallel circuits,
Measure the output with input filter, Choke input filter representation effect of open
different-filter circuits. and n Filter. branch, short
circuit across
parallel
branches, related
exercise.
18 Construct and measure the Passive, filter, Low pass, High -do- Temperature,
output in Low pass, High pass pass, Band pass and Band stop pressure.
and Band pass filter circuits. filter and their' applications, LT Newton’s law of
type, P type. motion,
applications,
momentum.
Simple problems
19 Find and draw the Bi-polar Transistors, PNP, NPN Explanation of -do-
characteristics curves of Bi- type, Characteristics of simple
polar transistors. Testing of transistors, Transistor as an orthographic
transistors by multimeter. amplifier, Transistor as a switch. projection 3rd
angle.
1 Assemble arid measure the Power amplifier, Single ended, Schematic Voltage dividers,
output power of power Complementary Push-Pull diagram of & current
amplifier circuits. Power amplifier. IC amplifiers. Moving coil dividers:
Fabrication of IC circuits. meter, Moving Series voltage
Voltage gain, Current gain, Iron meters, dividers, current
Power gain in decibels. voltmeter, divider with two
Ammeter, parallel
Ohm meter. resistances.
2 Study about the woofer, Mid Speakers and Micro-phones, -do- -do-
range, Tweeter and find their Dynamic. Types of speakers
frequency response. their sizes, rating and frequency
Familiarize with various types response. Sensitivity and
of microphones. directional properties of various
microphones.
3 Amplifier with feedback Distortion in amplifiers, Explanation of Direct-current
circuits; measure their output Amplitude distortion, Phase simple meters: Moving
with feedback and without distortion and frequency orthographic coil meter,
feedback. distortion. Feedback, Positive projection 3rd design of
feedback, Negative feedback angle. voltmeter,
their effects and applications. ammeter,
Voltage feedback and current loading effect of
feedback circuits. voltmeters,
related
problems.
4 Assemble and find the voltage Field Effect transistors, P -do- -do-
gain in FET and MOSFET Channel, N Channel, MOSFET
amplifiers. Find the stand-off their construction,
ratio of UJT. Characteristics and applications.
IC fabrication with MOSFET
technology. Handling of CMOS
ICs. UJT construction and
characteristics.
5 Assemble and find the Power supplies, Simple -do- -do-
regulation in series regulator, voltage regulator, Series
Series parallel regulator, 3 voltage regulators, Series
terminal IC regulator, Variable parallel voltage regulator with
voltage regulator. short circuit protection,
regulation, 3 terminal
regulators, variable power
supply, Current control in
regulators.
6 Assemble and observe the Oscillators, LC oscillators, Different types Complex
output of different types of Crystal Oscillator. Mono stable, of series numbers. Simple
Oscillators, Multivibrators and Bistable and Astable parallel problems
Schmitt trigger. Operations of Multivibrators. Schmitt trigger. circuits, Work, power
Function generator, AF & RF Function generator working representation and energy-
signal injector. principles AF, RF signal injector.
of nodes, etc. definition, units,
and simple
problems and on
shop floor
practices.
Conservation of
momentum and
energy
7 Circuit tracing and fault SMPS, Inverters and UPS their -do- -do-
finding in SMPS, Inverters and working principle and circuit
UPS. functions.,
8 Assemble and measure/observe Operational Amplifier, Inverting -do- Kirchoff’s laws:
the output on Inverting amplifier, Non-Inverting Kirchoff’s
Amplifier, Non -Inverting Amplifier, Differential voltage& current
Amplifier, Differential Amplifier, Summing amplifier, law, Branch
Amplifier, Summing Amplifier, gain, DC- offset, CMRR currents, node
Integrator and Differentiator. Integrator and-Differentiator. voltages, Mesh
currents, related
problems.
1 Verify the output and draw the Counters, Ripple Up counter, Exercise on Network
timing diagrams for various Ripple down counter, Up- Blue print theorems.
counters. Testing of digital Down counter, Parallel counter, reading Thevenin’s,
IC's. Frequency dividers, Decade circuits. Norton’s
counter, Modulo N Counter, theorems,
Ring counter, Jhonson counter. conversion of
voltage and
current sources.
2 Familiarize with the display Display devices, 7 segment Reading and -do-
devices, Assembling of digital format, LED, LCD displays, Dot drawing of
counter circuits and familiarize matrix format, Multiplexing and different stages
with digital multimeter de-multiplexing. PLL, Open of Radio
circuits. Study about the servo loop and closed loop systems, receiver
system - motor position and servo system for various circuits.
speed control systems. variables.
3 Visit to establishments with Computer - Definition, features -do- Arithmetic and
general purpose and special and applications. Hardware, geometric
purpose computers. Visit to software, live ware and firm progression,
Computer Centres with ware. Data, data types, physical sum of n-terms,
Mainframe, Mini and micro & logical concepts of data. Bit, simple
Computers. Familiarization byte, Kilo Byte, Megabyte and calculations.
with different type of Gigabyte. Generation,
Computers. Classification and
Applications of Computers.
Study latest features of Laptop
devices with blue ray disc drive.
4 Familiarize with the memory Block diagram of a Computer Practice on -do-
chips. Programming the System. Standard and common block diagram
ROMs. Copying PROM, input/output devices. Primary of computer
Erasing PROM. Connecting and Secondary Memory. system
and dismantling cords, cables Memories : RAM, ROM PROM,
and peripheral devices. EPROM, EEPROM. Dynamic
Identifying and handling and Static RAM. Cache
different types of CDs, DVDs, Memory. LI and L2 cache.
BRDs etc. Concept of Virtual Memory.
Buses - Control bus, Address
bus and Data bus.
5 to 8 Familiarize with the Micro processor-Program Practice on Binary and
Microprocessors, Address bus, counter, Stack pointer. Internal different types hexadecimal
Data Bus. Assembly language address bus, External address of output and number system
programs using 8085 bus, Data bus, Registers, ALU, input devices Boolean algebra
instruction set. Interrupt Memory interfacing, I/O Truth tables
Interfacing. A/D and D/A interfacing and Interrupt and logic gates
converters. interfacing techniques. DMA problems.
Controller. A to D and D to A
converters.
9 Understanding the keys and Booting - Booting sequence, -do- Conversion;
their functions in keyboard. cold and warm booting. Booting 'Decimal to
Keyboard operation and files and their functions. Power Binary, Octal,
practicing with mouse. Booting On Self Test (POST). Storage Hexa decimal
the computer under Windows. and retrieval of data - concept of numbers from
tracks, sectors, blocks, cylinders. decimal and vice
Boot record and Master Boot versa.
Record. File Allocation Tables
(FATs).
10-11 Introduction to Windows - The MS Windows - Starting Use of Batteries: Cells
user interface, Using mouse, Windows and its operations. File drawing & Batteries,
status bar, Start, Menus, management through Windows instruments, Series and
Running applications. My Explorer; Display and Sound ‘T’ square, parallel cells,
Computer, Recycle Bin, properties. Screen savers. Font drawing board, related exercise,
Windows Explorer. Creating, management. Installation of construction of
Renaming and Moving Files Programs. Settings, using and simple figures
and Folders. Using Help.' applications of Control Panel.
& solids with
12 Advanced Windows - Creating Applications of essential
dimensions,
shortcuts & Folders. Using accessories such as notepad,
Accessories. Adding arid Paintbrush, Calculator, use of different
removing components of Calendar, Media player and types of scales
windows. Sounds. Multimedia and photo in inch &
shop for designing. millimeters,
lettering
numbers &
alphabets.
15- 17 Installation of HDD and CD Drives - Hard Disk drives, CD -do- -do-
Drives. Formatting and Drives. ' Their types,
partition the HDD. construction and working.
Configuring as Master and Preparing a HDD, DVD, Pen
Slave. DVD, Pen Drive (USB) rive (USB) and BRDs.
and BRDs.
18 Identification and Key board and Mouse- different Block diagram Concept of shear
interfacing different type of types, working, and interfacing of an forces, bending
Keyboards and mouse. Ports - Serial & parallel, PS/2 oscillator, moment, torsion
Checking and cleaning of and USB. symbols for in shaft, simple
Keyboard switches and different wave problems.
cables. Servicing of Mouse.
shapes, Sq.,
Installation of various
peripherals in the serial port, saw tooth,
parallel port, USB and PS/2 sine, triangular
etc.
19 Fault finding procedure in Monitors- their working and -do- -do-
monitors. Adjusting the study the circuit functioning.
brightness and contrast pots. VGA, SVGA, XVGA and their
control cards AGPs.
20- 22 Installation, Servicing of Printers- types, servicing, -do- Properties of
Different types of Printers, Interfacing of Various printers. triangles, simple
Scanners, Plotters and Bar Scanners and plotters their problem of
code readers. Self Test for types, Interfacing. Concept of height &
Printers. Bar Coding and Bar code reader. distance
23- 24 Installation and setting of Multi media - their hard-wares -do- -do-
Multi -media components. and supporting soft -wares.
Installation of various Digital Camera, Principle and
multimedia soft-wares. working, Interface with
Operation, Interfacing and computers. Image transfer,
maintenance of Digital storage
Camera;
25 i)Project Work
ii) Industrial visit (optional)
26 Examination
C. WORKSHOP FURNITURE:
Sl. No. Name of the items Quantity
1 Instructor’s table 1 No
2 Instructor’s chair 2 Nos
3 Metal Rack 100cm x 150cm x 45cm 4 Nos
4 Lockers with 16 drawers standard size 2 Nos
5 Steel Almirah 2.5 m x 1.20 m x 0.5 m 2 Nos
6 Black board/white board 1 No
7 Computer table 8 Nos
8 Computer chair 16 Nos
9 Printer table 1 No