Академический Документы
Профессиональный Документы
Культура Документы
1. What Is Mechatronics?
Answer :
Answer :
Answer :
Closed loop control systems is a control system which has feed back to correct the input
to get the preferred output.
4. What Is Used To Make Considerable Simplification In The Devices Such As
Watches And Cameras Etc. As Compared To Pure Mechanical Designs?
Answer :
Answer :
oIn open loop system, the output does not affect the process in any way, as it works
on open loop.
o The open loop control system always proceeds in the same predefined manner
until it is switched off.
o This can be represented by block diagram
6. Where The Plc’s Are Used?
Answer :
o machine tools
o automated assembly equipment
o moulding and extrusion machines etc.
7. What Is The Formula For Thermal Capacitance?
Answer :
Answer :
Response of a system:
o The characteristic that provides an output with respect to the relation with the
input is called as response of a system.
o When an input is given to a particular system or instrument, it results an output in
some form.
o The output of a system or an instrument changes with the change in its input. -
This concludes that the output and the input of the system or instrument have
some definite relationship.
o This relationship is studied under some characteristics of the system or
instrument.
o When it is related to the system, then it is called as response of the system.
9. What Is Static Characteristics Of Instruments?
Answer :
The relationship between the input and output, when the input is invariant with respect to
time.
Answer :
Since the DAC conversion is easier and required lesser circuit components.
11. Which Is Portable And Cheaper – Micro Controller Or Plc?
Answer :
Micro controllers
Explanation: Since the setup is so smaller and can be reprogrammed for the requirement
and is easily portable and cheaper than PLC circuit having many components.
12. Which Type Of Memory Which Is Fast And Temporarily Stores The Data Which
Are Immediately Required For Use?
Answer :
Answer :
Answer :
15. Would You Say Me, Selecting Mechatronics Engineering Will Be Useful To My
Career In This Present Society?
Answer :
Mechatronics engg will be usefull to company because you may select mechanical engg
for mechanical maintenance and u may select electronics engg for electronics
maintenance .but mechatronics engg can handle both. so you may help your company in
this cost cutting timing.
16. Why Resistance Has Colour Code?
Answer :
It has colour code because there r so many resistance in circuit and if any one will be
burn then after dis-soldering we can see the resistance value easily by color code. now a
day in resistance it has writen its own value on it.
Answer :
1. The need
2. Analysis of the problem
3. Preparation of a specification
4. Generation of possible solutions
5. Selections of a suitable solution
6. Production of a detailed design
7. Production of working drawings
18. Why Stepper Motor Is Required?
Answer :
Stepper motors are used where precise angular movements are required in a system. Also
it has the following.
Answer :
Advantages:
Disadvantages :
Answer :
Mechatronics engineer is like a joker, he can play many rules according to his wide
knowledge fields he knows.
Answer :
Mechatronics engg will be usefull to company because you may select machanical engg
for mechanical maintenance and u may select electronics engg for electronics
maintenance .but mechatronics engg can handle both. so you may help your company in
this cost cutting timing.
Answer :
There is no difference… technically Both are logic controller… used for so many
applications and in PLC has it’s own internal memory ( compared to Logic card ) Logic
card also called PCB and PLC is combined version of Logic card and memory.
Answer :
Total costs depend on your specific product or service and the licensing package.
Answer :
28.Would you say me selecting Mechatronics Engineering will be useful to my career in this
present society?
mechatronics engg will be usefull to compony because you may select machanical engg for
mechanical
maintenance and u may select electronics engg for electronics maintenance .but mechatronics
engg can handle both. so you may help your compony in this cost cutting timing.