Академический Документы
Профессиональный Документы
Культура Документы
Section H Contents
A Economist............................................ 675
Aerosol Cylinder - Slide..................................... 682 Paintable............................................... 675
Accessories, Slide.......................................682–683 LMR Lecithin....................................... 675
Aerosol Can Holder............................................ 683 Quick Lecithin..................................... 675
Automatic Sprayer............................................. 682 Quick Paintable.................................... 675
Air-O-Spray System........................................... 683 Quick Silicone...................................... 675
C Specialty
Compressed Air Sprayers................................... 670 DFL "Cold" (Fluorocarbon).................. 677
Cleaners......................................................687–689 Dura Kote............................................. 679
BlueMagic Metal Polish............................. 689 Electronic............................................. 677
Citra-Cling.................................................. 688 Epoxease............................................... 679
Mold & Metal Wipes................................. 687 Heavy-Duty Mold Release and
Nexgen Metal & Mold Cleaner................. 688 Pin Lube........................................... 677
PC Polish Cleaner....................................... 687 HI-Temp............................................... 677
Plastics Cleaner.......................................... 688 Lubricant Powder................................ 678
Silicone Compound.................................... 689 Mold Saver........................................... 677
Silicone Remover....................................... 687 Pure Eze................................................ 678
Veri-Kleen.................................................. 687 Paintable............................................... 675
D Thermoset............................................ 679
Diamond Compound.................................692–693 Urethane.............................................. 679
Water Soluble/Paintable...................... 678
F
Water Based - Environmentally Safe........ 676
Felt Bobs............................................................. 694
Freedom Sprayer Unit........................................ 682 P
Pneumatic Grease Gun...................................... 681
L
Pump Sprayer and Bottle................................... 683
Lubricants..........................669; 680–681; 689–690
Purging Compound....................................666–668
100% ODC Free Cutting Oil..................... 680
Cortex......................................................... 666
Econo-Spray Pin Lube & Grease......... 680
KLENZ........................................................ 669
Heavy-Duty Mold Release
Slide NPT Nu............................................. 667
& Pin Lube............................................. 680
Slide P.D.Q. Concentrate............................ 667
Silicone Spray....................................... 680
Slide P.D.Q Ready-to-use Packets............. 667
TAP-IT.................................................. 680
SuperNova.................................................. 666
Copper & Nickle Anti-Seize...................... 689
Tuff-Scrub Clear Acrylic Base................... 668
Industrial Lubricant - WD-40................... 669
Ultra Purge Plus......................................... 668
Lithium Grease.......................................... 689
Lubricating Oil........................................... 694 R
SuperGrease Rust Preventatives.....................................684–685
Spray..................................................... 681 Acid Vapor Neutralizer.............................. 684
Paste..................................................... 681 Econo-Spray............................................... 685
Grease Gun........................................... 681 Mold Shield................................................ 684
TPFE Paste................................................. 690 Penetrant Plus........................................... 684
Quick Rust Preventative........................... 684
M
No-RUST.................................................... 685
Mold Cleaners.................................................... 686
White Rhino............................................... 685
Econo-Spray - Approved for
indirect food contact............................. 686 S
H
Mold Cleaner Plus Degreaser 4................. 686 Sealants.......................................................690–691
NFC............................................................. 686 Tape Thread Sealant.................................. 690
On/Cycle..................................................... 686 Pipe tape sealant with PTFE..................... 690
Quick Mold Cleaner................................... 686 RTV Silicone............................................... 690
Resin Remover........................................... 686 Boltlocker................................................... 691
Mold Releases.............................................673–679 Slide Products.............................................672–688
Economy -1, 2 or 3.................................... 674 Sprayer, Slide Freedom Sprayer Unit................ 682
Heavy Duty Superglue............................................................ 691
Silicone................................................. 676 W
Polycarbonate....................................... 676 WD–40................................................................ 669
Universal.............................................. 676
Light & Medium Duty
Excellent for color and material changes, reducing contamination, eliminating black specking and for
shutdown/startup. Dyna-Purge offers 6 different products and 3 different package sizes to accommo-
date every purging need.
COMPOUNDING
COLD RUNNER /
HOT RUNNER
BLOWN FILM
CAST FILM
SYSTEMS
HIGH (oC)
HIGH (oF)
LOW (oC)
LOW (oF)
PROFILE
SHEETS
GRADE
D2 350 625 177 329
E2 575 715 302 379
K 290 550 143 287
F 320 575 160 302
C 380 590 193 310
SF 320 575 160 302
New DYNA-PURGE® D2
The most versatile and innovative commercial purging compound in the plastics industry
DYNA-PURGE D2 is the latest technology breakthrough working to scrub, clean and remove contamination
effectively, without leaving a residue. A proprietary component is formulated to flow to the boundary layers
to flush out the resident resin, while another acts as a pressurizing agent allowing for the purge to reach
stagnation points. In addition, an encapsulated fine targets degraded material adhering to the surface. This
dynamic “triple action” innovation thoroughly cleans and removes material from the screw and barrel as
well as the tool or die.
DYNA-PURGE® E2
Designed for High-Temperature Engineering Resins
DYNA-PURGE E2 delivers the most advanced technology breakthrough in heat stability and enhanced clean-
ing. Its unique integrated polymer system was developed for purging high-temperature resins safely and
efficiently in all areas of the machine, including tight channels.
H
• Low odor with less fumes
• Non-abrasive, non-chemical integrated polymer system thoroughly cleans and displaces the previous production
resin and color
• Easy to use- no mixing required
DYNA-PURGE® K
“Dual Power” cleaning for a broad range of low-temp resins
DYNA-PURGE K is a low-temperature, non-abrasive, non-chemical engineered thermoplastic purging compound,
formulated to flow naturally through the machine. Two unique ingredients provide for a “dual power” cleaning
experience. A non-melting but softening thermoplastic scrubs while a proprietary additive expands, removing
any contamination without leaving behind a residue.
DYNA-PURGE® F
Designed for quick color changes
DYNA-PURGE F is a non-abrasive, non-chemical engineered thermoplastic purging compound with a propri-
etary additive, formulated to flow naturally through the barrel and hot runner system of the injection molding
machine, as well as extrusion equipment.
DYNA-PURGE® C
Designed for Clear and Transparent Resins
DYNA-PURGE® SF
Designed for Profile, Sheet, Blown & Cast Film
The most effective new purging technology developed in decades, Slide NPT Nu Purge eliminates the need for multiple
purging products since it effectively operates at temperature ranges from 160–600°F. It removes all traces of barrel
residue in any plastics processing application in less time and for less cost.
Slide NPT Nu Purge solves the major problem of removing stubborn residue between color or resin changes. The most
effective new purging technology developed in decades, Slide NPT Nu Purge consists of concentrated purge pellets
that react chemically to heat, quickly and effectively cleaning machinery without extra soak time, excess downtime or
lost productivity. The resulting purge is so effective that even resin deposits accumulated over long periods are often
removed the first time Slide NPT Nu Purge is used.
Easy to use, Slide NPT Nu Purge requires no mixing or preparation time, shortening the clean-up cycle. Just pour the
recommended amount directly into the throat of the machine. Slide NPT Nu Purge is so concentrated that less compound - up
to one-half the amount of cracked acrylic - is needed for a complete purge. Slide NPT Nu Purge is non-hazardous, FDA
compliant and free of harsh odors.
P.D.Q. Concentrate
Concentrated Liquid Purging Compound
Heat stable. Non-toxic. Non-corrosive. Non-flammable. Almost odorless. Use with carrier
resin for the removal of all thermoplastics - resin to resin and color to color. Purge quickly,
easily, safely and at a fraction of the cost of conventional purges - injection, extrusion or
blow molding. Requires no soaking. No need to keep cracked acrylic purging resin inventor y.
Unique self-measuring bottle “meters out” just the right amount with little waste. Net 32 fl.
oz.
QUANTITY
Bottle Quart DISCOUNT
43432 Bottle Discount applies to
current pricing:
42–89 less 14%
90 or more less 20%
KLENZ
KLENZ is a revolutionary purging compound requiring no mixing or preparation time. With operating
H
temperatures of 330° - 610°F, KLENZ thoroughly cleanses hot runners and the barrel, helping to eliminate
color streaking and black specs. Formulated with a polyolefin resin carrier, KLENZ Purging Compound is safe
to purge right through the mold, saving time, material and money. All ingredients are GRAS rated so it is
safe to use for food packing applications. For use with injection molding, extrusion and blow molding.
Spare Parts – Model 8000 & 8500 Spare Parts – Model SS1000 122 Optional
121 119
Part Part
Description Description 302 309 108 110 118
Number Number 111 301 115 117
303 307 120 114 116
SSB04EP E.P. O-ring (stainless) SS108 Adapter washer
SSB04N Neoprene O-ring (stainless) SS110 Valve assembly*
/3 Air
1
Part
Description Spare Nozzles – 6 per pack
Number
Part
SS301 Pin stream – 20’ range Description
Number
SS302 General purpose mist SSB30-040 Fine mist – wide pattern
SS302B Coarse mist SSB30-043 Medium mist – medium pattern
SS302C Extra fine mist SSB30-035 Medium mist – tight pattern
SS602 Adjustable – fine-to-pin stream SSB30-080 Heavy mist – tight pattern
SS305 Extra uniform – fine mist SSB30-001 Pin stream with 6” Ex Tube
SS707 Extra, extra fine mist Fits models SS-8000, 8300, 8500 & 8800
Contract Pricing
DME Industrial Supplies offers contract pricing on all Slide products, DME can set up special pricing based on
your usage. Simply fill out the following page with your monthly or annual usage of any mold spray and we will
quote you a special price. This unique option allows you to receive up to last column pricing based on your long-
term buying. Just another way to let you know, we appreciate your business!
Beware!
Compare Prices Ounce for Ounce!
It has come to our attention that some of our competitors may be offering a lower price per can but a higher
price per ounce! Check the ounces per can before comparing prices. Many of their cans may have air space
and less product. Slide gives you more ounces of better product at a lower cost per ounce!
ELECTRONIC
QUOTE REQUEST
FO RM
or visit
www.dme.net/rfq
Accepted By
Date
Slide makes the choosing easier Free samples make testing easier
We know the right mold release, with the right formulation, Slide also knows the proof of effectiveness is right at the
is critical to your productivity. Slide Products helps you make mold. So we offer free samples to test in your plant,
it easier to choose. so you can try it before you buy it.
Simply review the table below and pick the product with the Once you choose the releases you feel are right for you,
characteristics that are critical to you, and also work well with contact DME at 800-626-6653 to get your free samples or
the resin you are going to use. additional assistance in choosing the right release for you.
Polycarbonate 41412
Quick Silicone 44612
Urethane 45812H
Thermoset 45414
EpoxEase® 40614
Electronic 42712
Universal 42612
DuraKote 41712
Paintable 40012
Lube 54912
Mold Release Characteristics
No chlorinated solvents • • • • • • • • • • • • • • • • • • • • • • •
Food-approved (silicone) • • • •
Food-approved (non-silicone) • • • • • •
Paintable • • • • • • • • • • • • • • • • •
Fast-acting solvent • • • • • • •
ABS • • • • • • • • • • • • • • • • • • •
Acetal • • • • • • • • • • • • • • • • • • •
Acrylic • • • • • • • • • •
Noryl®
• • • • • • • • •
Nylon • • • • • • • • • • • • • •
Polycarbonate • • • • • • • • • • • • • • • •
Polyester
Polyethylene • • •
•
•
•
•
• •
•
•
H
Polypropylene • • • • • • • •
Polystyrene • • • • • • • • • • • • • • • •
Polysulfone • • • • • • • • • • • • •
PVC • • • •
Rubber • • • • • • • • • • •
Urethane • • • • • •
Wax • • • •
Econo-Spray I
••No chlorinated solvents 40510
40510CAN
Case
10oz can
••Approved for food 40505B 5 gallon
machinery*
40555B 55 gallon
40710 Case
40710CAN 10 oz. can
40705B 5 gallon
40705B 55 gallon
40810 Case
40810CAN 10 oz. can
40805B 5 gallon
40855B 55 gallon QUANTITY
DISCOUNT
Econo-Spray 3 contains a highly effective non-silicone release which
Discount applies to
is approved as a direct food additive.* No chlorinated solvents. This Slide cases only -
product is highly paintable, and will permit ultra-sonic welding of current pricing:
molded parts. It affords excellent release of all thermoplastics. 7–14 less 5%
Pre-test all resins. Maximum operating temperature: 600ºF. 15–23 less 10%
24 or more less 15%
*Lubricants are suitable for food contact as indicated in Title 21 of the Code of Federal
Regulations. Federal Definitions and Standards of Identity for Food CFR 121.101 (G.R.A.S.)
H
migration. Max. operating temp: 500°F.
Net wt. 11.5 oz. (16 fl. oz.)
Per Case (12 cans)
Per Case (12 cans) QUANTITY 44812 Case
43512 Case DISCOUNT 44812CAN 12 oz. can
43512NCAN 16 oz. can 44835N Cylinder (equal to 4 doz. 12 oz. aerosol cans)
Discount applies to
current pricing:
7–14 less 5%
15–23 less 10%
24 or more less 15%
*Federal Register of the F.D.A. Paragraph 173.300; also Paragraph 176.80. Federal Definitions and Standards of Identity for Food CFR
121.101 (G.R.A.S.)
44312 44512
44512NCAN 12 oz. can
*Federal Register of the F.D.A. Paragraph 173.300; also Paragraph 176.80. Federal Definitions and Standards of Identity for Food CFR
121.101 (G.R.A.S.)
H
temperature: 1800˚F. the cavity regularly while molding to prevent
Net wt. 10 oz. (16 fl. oz.) mold deposits from forming and attacking the
mold. Maximum operating temp. 550˚F.
Net wt. 10 oz.
(Previous part no. 42519)
Per Case (12 cans) Per Case (12 cans)
44110 Case 42510T Case
44110CAN 10 oz. can 42510TCAN 10 oz. can
*Federal Register of the F.D.A. Paragraph 173.300; also Paragraph 176.80. Federal Definitions and Standards of Identity for Food CFR
121.101 (G.R.A.S.)
Mold Releases
Slide®
Epoxease® Mold Release Agent No. 40614 Per Case (12 cans)
Synthetic wax-based product. for injection QUANTITY
40614 Case
molding, encapsulating, potting. DISCOUNT
40614CAN 10 oz. can
Non-silicone mold release agent for thermosets. Discount applies to
For epoxy, polyester and phenolic molding. 40601B 1 gallon Slide cases only -
Formulated to prevent sticking caused by using 40605B 5 gallon current pricing:
all-purpose agents on epoxies. 40655B 55 gallon 7–14 less 5%
15–23 less 10%
Maximum operating temperature: 450°F. 24 or more less 15%
Thermoset Mold Release Agent No. 45414 Per Case (12 cans)
Contains no silicones or oils. Thermoset Release 45414 Case
is made with synthetic carnauba wax, the most
effective formulation for molded thermoset 45414CAN 14 oz. can
plastics, rubber and similar materials.
It stops parts from sticking, maximizing
productivity. It is ideal for injection, compression
and transfer molding. Maximum operating
temperature 600F.
Silicone Spray Lube 42112 Econo-Spray Pin Lube & Grease 46010
All-around lubricant. Use on windows, locks, A white lithium grease that protects
hinges, zippers, household appliances, sport equipment by reducing the friction and
ing goods, fabrics (incl. synthetics), metal sticking that can cause pre-mature wear and
runners, cutting edges, sewing needles, hinder productivity. Pin Lube & Grease is
cameras and more. Especially recommended ideal for knock-out pins where part marking
for sliding wood surfaces. Polishes all plastics, could be a problem. A heavy-duty grease, it
stainless steel and aluminum. Removes water is water resistant, protects against corrosion
spots. Approved as indirect food additive. and works at a wide range of temperatures.
*Operating temperature: -100˚F to 600˚F. Operating temperature: -20ºF to 400˚F.
Net wt 12 oz. (16 fl. oz.) Net wt. 11 oz.
QUANTITY
DISCOUNT
Per Case (12 cans) Discount applies to Per Case (12 cans)
40412 Case Slide cases only - 41314 Case
40412CAN 12 oz. can current pricing: 41314CAN 14 oz. can
40401B 1 gallon 7–14 less 5% 41301B 1 gallon
40405B 5 gallon 15–23 less 10% 41305B 5 gallon
24 or more less 15%
40455B 55 gallon 41355B 55 gallon
“Valve-Up”
Giant Aerosol Cylinder
This money-saving aerosol is a versatile spraying unit for use with automated or robotic equipment.*
Each 'one-way' disposable**cylinder equals 4 dozen aerosol cans 100% useable. Offered in many SLIDE
products.
*Not installed by Slide Products, Inc.
QUANTITY
**Non-refillable by federal regulation DISCOUNT
Discount applies to
current pricing:
10+ cylinders less 5%
*Federal Register of the F.D.A. paragraph 173.300; and paragraph 176.80. Federal Definitions and Standards of Identity for Food CFR
121.101 (G.R.A.S.)
••Neutralizes
metal without drying
positive protection by displacing moisture from metal fingerprints before spraying. It
surfaces. Adheres tightly. Accurate spray pattern ••Self-healing helps rust removal
concentrates protection in normally inaccessible
crevices. Protects up to five years under normal
••Does not have to be removed
before using molding dies
and is compatible
with lubricating oil
conditions. Net wt. 12 oz. (12 fl. oz.).
Conforms to MIL-C-23411. ••Harmless blue color indicates and greases.
coverage
QUANTITY
Per Case (12 cans) Per Case (12 cans)
DISCOUNT
40212 Case 45510 Case
Discount applies to
40212CAN 12 oz. can 45510CAN 10 oz. can
Slide cases only -
40201B 1 gallon 45501B 1 gallon current net pricing:
40205B 5 gallon 45505B 5 gallon 7–14 less 5%
40255B 55 gallon 45555B 55 gallon 15–23 less 10%
24 or more less 15%
Veri-Kleen 42012 Contact & Metal Cleaner Mold & Metal Wipes 46370
Will not harm rubber, paint etc. Excellent contact cleaner Presaturated Cleaning Towels
and flux remover. Ideal for circuit boards, tape heads, Fast, convenient, presaturated sheets
motors and a variety of metal cleaning applications. quickly clean almost any surface.* Use
Non-conductive and non-flammable. It has a very for preparing molds for production
mild odor. Can be used safely on operating electrical or storage; touch-up cleaning during
equipment, leaving no residue after evaporating. production; surface prep prior to
Net wt. 12 oz. secondary operations; and general
maintenance and all-purpose
cleaning. Using wipes reduces solvent
consumption and VOC’s emissions.
Canister of 70 wipes.
*Pre-test on non-metal surfaces.
Citra-Cling 46515
This mold and metal cleaning product is formulated with a natural orange citrus solvent
!
(d’limonene) that cleans most surfaces. Slide formulated this product to dispense with a
foaming action that has tremendous clinging ability. This feature allows for the product to
New
hang on vertical surfaces, maximizing the cleaning time for the product. Simply spray this
foaming product on and wipe clean. It contains no chlorinated solvents, petroleum distillates or glycol ethers. The
product is 99% biodegradable, non-toxic and can be used on painted surfaces. Excellent for removing mold release,
dirt, oil and greases from most any surface. Net wt. 15 oz.
BLUE MAGIC™ Professional Quality Metal Polish Cream - Unique Formula. BLUE MAGIC™ is the most
effective and versatile cleaner, polish and protectant you can use. BLUE MAGIC™ is renowned for its
performance on a wide variety of metal, including precious metals. Chemically Deep Cleans the surface
to remove tarnish, oxidation and other dulling agents. Easy to use. Satisfaction guaranteed!
Ideal for Use on:
••Chrome ••Gold ••Brass ••Pewter
••Aluminum ••Silver ••Stainless Steel ••Plexiglass
••Magnesium ••Copper ••Bronze ••Fiberglass
Part Number Container Size
MP100-12 100 gram tube (3.53 oz.)
MP500-12 500 gram plastic jar (17.6 oz.)
Silicone Compound
••Similar to Dow Corning 111 ••Chemically inactive – non-solidifying
••Operating range: –40°F to +500°F ••Right from the tube or thin with mineral spirits
••Corrosion protectorant/release agent ••Won’t carbonize or harden
••Prevents drying and cracking of rubber components ••Heat stable – non-melting
••Excellent wash-away resistance Part Number Size
SG151 5.3 oz. tube
Lithium Grease
White Lithium Grease
••Extra-duty white lube that protects against rust and corrosion
••Use for with mold cams, pins, bushings and all Part Container QUANTITY
mold components Number Size
••Makes contact surfaces friction free, 49596 16 oz. aerosol
DISCOUNT
use from -40°F to +500°F Discount applies to
••Excellent for metal-to-metal contact, 49594
49595
1.5 oz. tube
16 oz. tub
current pricing:
nontoxic, nonf lammable, will not stain 5 or more less 4%
••Resists moisture & high heat; will not separate
under load
Copper & Nickel Anti-Seize
High Temperature Anti-Seize & Lubricating Compounds
••Choose copper or nickel base; rated to 2000°F
••Eliminates galling & seizing
••Suggested for nozzles, screw tips, cylinder bolts, mold clamps, etc. H
Part Container Max. Temp. QUANTITY
Compound Type
Number Size & Type Rating (˚F)
ASC4 Aluminum Anti-Seize w/ Copper Flake 4 oz/brush-top 2000° DISCOUNT
ASC8 Aluminum Anti-Seize w/ Copper Flake 8 oz/brush-top 2000° Discount applies to
current pricing
CAS8 Pure Copper 8 oz/brush-top 2000°
6–11 less 3%
ASN8 Pure Nickel 8 oz/brush-top 2000° 12 or more less 6%
ASC16 Aluminum Anti-Seize w/ Copper Flake 16 oz/brush-top 2000°
*Meets MIL-90; contains no moly-disulfide. Copper/Aluminum also available in 42 lb. pails.
RTV Silicone
RTV Silicone Adhesive Sealant
••Bonds most plastics many assemblies uses
••Cures at room temperature to a tough flexible rubber
••Resists shrinkage
••Perfect for caulking, sealing, waterproofing & bonding
••Bonds & seals terminals, connectors, mounting fixtures, mechanical gaskets, glass,
metal, masonry, plastic, tile, rubber, wood & fabric
Operational temp.(RTV Silicone): –60°F to +450°F
Max temp.(Silicone Gasket Makers): 650ºF
Part
Number
Container Size Color QUANTITY
49204 3 oz. tube Clear DISCOUNT
49294 11 oz. cartridge Clear* Discount applies to
Silicone Gasket Makers current pricing:
49202 3 oz. tube Red 12–23 less 3%
24 or more less 5%
49292 11 oz. cartridge Red
* Available in marine grade & mildew resistant
Dynatex high strength Boltlocker is a single component, anaerobic liquid which chemically
cures in the absence of air between close fitting metal surfaces. It has a high strength
anaerobic threadlocking material that cures between engaged threads. Locks and seals metal
threaded assemblies in a wide range of applications. Prevents nuts, bolts and other fasteners
from loosening due to vibration. Prevents rusting of threads. Fixture tight in minutes.
49442 Medium Strength – Blue For application before assembly. Eliminates stocking lock
washers & lock nuts. Can be removed without special tools. Fills gaps to .006”.
49452 High Strength – Red Locks & seals where high strength is required.
Fills gaps to .008”. Protects threads against corrosion.
49462 Wicking Type – Green Locks Part Number 49442 49452 49462 49472
& seals metal threads after assembly Color Blue Red Green Green
& adjustments are complete. Fills gaps Viscosity 1,000 CPS 2,500 CPS 15 CPS 500 CPS
to .005”. Migrates into pre-assembled Gap Filling 0.007 0.010 0.003 0.01
threads. Secures in minutes. Breakaway Torque 75–100 <125 <50 50–150
49472 Sleeve Retainer – Green Prevailing Torque 30–100 <150 150-300 >200
Elimin
ates press & slip fits. Fixture Cure 20 min. 5 min. 3 min. 15 min.
Full Cure 8–24 hrs. 8–24 hrs. 8–24 hrs. 8–24 hrs.
Replaces splines & keys. Returns worn
Temp Range –75 to 300°F
out-of-tolerance assemblies to fit.
Spec. Gravity 1.09 1.10 1.10 1.10
Locks & seals studs, shafts & bearings.
Fills gaps to .006”.
Superglue
Instantly bonds glass, metals, plastics, & rubber. Bonds close-fitting parts in seconds.
Works on clean surfaces of aluminum, copper, brass, steel, vinyl, PVC, polyester, nylon,
fiberglass & wood.
#49403 Super Glue – Instant Bond
••3 gram bottle
••Ethyl grade
••Bonds close fitting parts in seconds
••For aluminum, copper, brass, steel, vinyl, PVC, polyester, nylon, fiberglass & wood
#49431 Super Glue – Instant Bond
••20 gram bottle
••Ethyl grade Part Number 49403 49431 49433
••Bonds close fitting parts in seconds
••For aluminum, copper, brass, steel, vinyl, PVC,
Color
Viscosity
Clear
100
Clear
100
Clear
Gel
H
polyester, nylon, fiberglass & wood Gap Filling .002 .002 .015
Holding Strength 3,200 PSI
#49433 Super Glue – Gelled, Non-Run Fixture Cure - (Secs) 20-40 30-40 50-70
••2 gram tube Full Cure - (Hrs) 8-24 hrs. 8-24 hrs. 8-24 hrs.
••No-run formula Temp Range –65°F to 180°F
••Great for vertical surfaces Spec. Gravity 1.06 1.06 1.08
••Extra strength formula bonds rubber, plastics,
glass, metal, leather and cork
U.S. 800-626-6653 • Canada 800-387-6600 • Mexico 52-442-7135666 • Worldwide +1-248-398-6000 695
DME@dme.net • www.dme.net/industrialsupplies • DME price list: www.dme.net/prices
Diamond Compound
DME Diamond Polishing Compound For High-Quality Mold and Die Polishing
Quality of mold or die finish is frequently an important factor in how a mold or die operates. DME Diamond
Compound is proven to produce the finest quality finish with considerable savings in time and labor.
DME Diamond Compound contains no adulterants, nor non-graded, non-working diamond “fines.” The
precision-graded diamond particles are uniformly and permanently dispersed and blended in a high-quality,
universally soluble, synthetic vehicle giving the best compositions possible. Available in 5 gram and
18 gram sizes.
5 Grams
18 Grams
H
18 Grams Standard DC45S18
Heavy DC45H18
Medium DC60M5
5 Grams Standard DC60S5
Heavy DC60H5
60 Natural
Medium DC60M18
18 Grams Standard DC60S18
Heavy DC60H18
FB503MS1A 1
⁄2” 1”
FB503MS2A 1
⁄2” 1
⁄2”
FB503MS3F 1
⁄2” 1”
FB503MS5A 1
⁄2” 3
⁄4”
FB503MS6A 1
⁄2” 1
⁄2”
Cylinders
FB503CB2A 3
⁄8” ⁄8”
3
FB503CB4 1
⁄2” 1
⁄2” !
New
OS Type IV Lubricant
This low-viscosity, oil soluble lubricant is compatible with oil-based slurries and compounds,
including our DME Diamond Compound.
Save time and money by using the right spill control solution from DME Industrial Supplies!