Вы находитесь на странице: 1из 3

Schedule

MS ISO/IEC
Issue date: 29 February 2016 17025
SCHEDULE Valid until: 11 June 2017

NO: SAMM 398


(Issue 3, 29 February 2016 replacement
of SAMM 398 dated 9 April 2015)
Page 1 of 3

LABORATORY LOCATION: INSPECTORATE MALAYSIA SDN BHD


(PERMANENT LABORATORY) PENGERANG TERMINAL SDN. BHD. (PTSB)
LOT PTD 4837, LABORATORY BUILDING
MUKIM PENGERANG
81600 KOTA TINGGI
JOHOR

This laboratory accredited under Skim Akreditasi` Makmal Malaysia (SAMM) meets the
requirements of MS ISO/IEC 17025:2005 ‘General requirements for competence of
testing and calibration laboratories’. This Malaysian Standards is identical with ISO/IEC
17025:2005 published by the International Organization for Standardization (ISO).

FIELD OF TESTING: CHEMICAL

SCOPE OF ACCREDITATION:

Materials / Type of tests / Standard test


Products Properties measured / methods /
Tested Range of measurement Equipment /Techniques

Palm Oil & Free Fatty Acids AOCS Ca 5a-40 (1997)


Palm Oil Products
Moisture and Volatile Matter AOCS Ca 2b-38 (1997)
Hot Plate Method

Insoluble Impurities AOCS Ca 3a-46 (1997)

Iodine Value of Fats and Oils AOCS Cd 1d-92 (1997)


Cyclohexane-Acetic Acid Method

Slip Melting Point AOCS Cc 3-25 (1997)


AOCS Standard Open Tube Melting Point

Colour AOCS Cc 13e-92 (1997)

Note: AOCS – American Oil Chemist Society

Signatory:

1. Mr. Ridzuan Aliman IKM No.: A/2944/5739/10

SKIM AKREDITASI MAKMAL MALAYSIA (SAMM)


LABORATORY ACCREDITATION SCHEME OF MALAYSIA
Schedule

MS ISO/IEC
Issue date: 29 February 2016 17025
SCHEDULE Valid until: 11 June 2017

NO: SAMM 398


(Issue 3, 29 February 2016 replacement
of SAMM 398 dated 9 April 2015)
Page 2 of 3

FIELD OF TESTING: CHEMICAL

SCOPE OF ACCREDITATION:

Materials / Type of tests / Standard test


Products Properties measured / methods /
Tested Range of measurement Equipment /Techniques

Gasoil/Gasoline/Jet A1 Determination of Total Sulphur In Light ASTM D5453


Hydrocarbon, Spark, Ignition Engine Fuel,
Diesel Engine Oil and Engine Oil by Ultraviolet
Flouresence

Gasoline Determination of MTBE, ETBE, TAME, DIPE, ASTM D4815


Tertiary-Amyl Alcohol and C1 to C4 Alcohols
in Gasoline by Gas Chromatography

Gasoline Determination of Benzene, Toluene, ASTM D5580


Ethylbenzene, p,m-xylene, o-xylene, C9 and
Heavier Aromatics in Finished Gasoline by
Gas Chromatography

MTBE Analysis Methyl Tert-Butyl Ether (MTBE) by ASTM D5441


Gas Chromatography

Gasoil/Jet A1 Determination of Aromatics Hydrocarbon IP391


Types in Middle Distillate-HPLC Method with
Refractive Index Detection

Gasoline/MTBE Research Octane Number of Spark Ignition ASTM D2699


Engine Fuel

Gasoline/Gasoil/Jet A1 Density and Relative Density of Liquids by ASTM D4052


Digital Density

Gasoil/Gasoline/Jet A1 Distillation of Petroleum Product at ASTM D86


Atmospheric Pressure

Gasoil Cold Filter Plugging Point of Diesel and ASTM D6371


Heating Fuels

Gasoil Cloud Point of Petroleum Products ASTM D2500

Gasoil/Crude Oil Pour Point of Petroleum Products ASTM D97

Gasoil Free Water and Particulate Contaminant in ASTM D4176


Distillate Fuels (Visual Inspection)

SKIM AKREDITASI MAKMAL MALAYSIA (SAMM)


LABORATORY ACCREDITATION SCHEME OF MALAYSIA
Schedule

MS ISO/IEC
Issue date: 29 February 2016 17025
SCHEDULE Valid until: 11 June 2017

NO: SAMM 398


(Issue 3, 29 February 2016 replacement
of SAMM 398 dated 9 April 2015)
Page 3 of 3

FIELD OF TESTING: CHEMICAL

SCOPE OF ACCREDITATION:

Materials / Type of tests / Standard test


Products Properties measured / methods /
Tested Range of measurement Equipment /Techniques

Gasoil/Fuel Oil Water in Petroleum Products and Bituminous ASTM D95


Materials by Distillation

Gasoline/Gasoil/Fuel Density/Relative Density or API Gravity of ASTM D1298


Oil/Crude Oil Crude Petroleum and Liquid Petroleum
Products by Hydrometer Method

Crude Oil Salts in Crude Oil (Electrometric Method) ASTM D3230

Gasoline Vapor Pressure of Petroleum Products (Mini ASTM D5191


Method)

Gasoil/Fuel Oil Kinematic Viscosity of Transparent and ASTM D445


Opaque Liquids

Gasoline/Crude Oil Vapor Pressure of Petroleum Products (Reid ASTM D323


Method) (Procedure A)

Gasoline/Gasoil Corrosiveness to Copper from Petroleum ASTM D130


Products by Copper Strip Test

Gasoil/Crude Oil Acid Number of Petroleum Products by ASTM D664


Potentiometric Titration

Gasoline/Jet A1 (thiol mercaptan) Sulphur in Gasoline, ASTM D3227


Kerosene, Aviation Turbine and Distillate
Fuels (Potentiometric Method)

Gasoil/Crude Oil Determination of Water in Petroleum ASTM D6304


Products, Lubricating Oils and Additives by
Coulometric Karl Fisher Titration

Note: ASTM – American Society for Testing Materials

Signatories:

1. Mr. Ridzuan Aliman IKM No.: A/2944/5739/10


2. Mr. Abdul Karim Yaakub IKM No.: A/3279/6109/11
3. Ms. Nuraini Mohd Yassin IKM No.: A/3443/6322/12

SKIM AKREDITASI MAKMAL MALAYSIA (SAMM)


LABORATORY ACCREDITATION SCHEME OF MALAYSIA

Вам также может понравиться