0 оценок0% нашли этот документ полезным (0 голосов)
161 просмотров1 страница
This document provides specifications for a belt conveyor that will transport limestone from a feed hopper to a jaw crusher. The conveyor has a capacity of 3.5 MT/Hr and will transport raw limestone with a bulk density of 2500 kg/m3 and lump size of nominally 300mm. It will be powered by a 5KW AC geared motor running at an RPM specified by the vendor. Drawings will also be provided for fabrication of components like the conveyor frame and discharge chutes.
This document provides specifications for a belt conveyor that will transport limestone from a feed hopper to a jaw crusher. The conveyor has a capacity of 3.5 MT/Hr and will transport raw limestone with a bulk density of 2500 kg/m3 and lump size of nominally 300mm. It will be powered by a 5KW AC geared motor running at an RPM specified by the vendor. Drawings will also be provided for fabrication of components like the conveyor frame and discharge chutes.
This document provides specifications for a belt conveyor that will transport limestone from a feed hopper to a jaw crusher. The conveyor has a capacity of 3.5 MT/Hr and will transport raw limestone with a bulk density of 2500 kg/m3 and lump size of nominally 300mm. It will be powered by a 5KW AC geared motor running at an RPM specified by the vendor. Drawings will also be provided for fabrication of components like the conveyor frame and discharge chutes.
1. Duty To feed material from Feed Hopper to Jaw Crusher-1 2. Capacity 3.5 MT/Hr 3. Conveyor c/c length, horizontal 11.5 m c/c (to be finalized according to actual layout & Suitable weighing frame to be installed below horizontal portion) 4. Conveyor c/c length, inclined 20 m c/c (to be finalized according to actual layout) 5. Conveyor lif 8 m lif (to be finalized according to actual layout) 6. Materials being conveyed Raw Lime stone CaCO3 a) Bulk density 2500 kg/m3 b) Lump size Nominal 300 mm c) Temperature of material Ambient 7. Feed point location for conveyor Tail end 8. Number of feed-points One 9. Method of discharge By head pulley 10. Number of discharge-points One 11. Take up Location Tail Pulley 12. Type of Motor AC Geared Motor 13. RPM of the Motor Vendor to specify* 14. KW of the Motor 5 KW * 15. Supply Voltage 3 Ø 415 V, 50 Hz AC 16. Belt width 500 mm*/400 mm Note:
a) * Actual to be specified by vendor.
b) Vendor to provide GA drawings including motor reduction unit and guards. c) Manufacturing drawings of Conveyor belt top cover ( to prevent ingress of rain water into the material ), Feed Material Chute and Hood, Discharge Chute and Hood, Support structure of the belt conveyor and the conveyor frame structure, to be provided for fabrication at site. d) Suitable skirts to be provided to prevent spillage of material e) Enclosed please find the Drawing number PTIL/VOL/SP/DWG/2005