Академический Документы
Профессиональный Документы
Культура Документы
Section One
Draw circle for right answer
GGSN ………
SCCP ………
TCAP ………
PDH ………
VSAT ………
IN ………
ENodeB ………
ETSI ………
HSCSD ………
4. The decision of Handover a call from a WCDMA cell to a cooperating GSM cell is made in
_____?
8- What is the modulation techniques are using in EDGE & WCDMA respectively?
A- 8-PSK & QPSK B- QPSK & 8QAM C- GMSK & QPSK D- 16QAM & 16-PSK
B- The MS scans the frequencies carrying SDCCH frequencies of neighboring cells only.
11- The BSC contains hardware to accommodate GPRS activity in the radio side of the network is
called:-
A- RCU B- TRC C- BCU D- PCU
12- What is the name of the common part of Signaling System No. 7, used by all User Parts?
A- Common Channel Signaling Subsystem.
13- What is the Bit rate that requires conversion from the BSC towards the TRC on BSS side?
A.64kbit/s B.16kbit/s C- 22.8kbit/s D.128kbit/s
2- The frequency range chosen by ETSI to be used in GSM1800 System are __ and ___.
6- Fill in the blank in each statement below with the proper digit:-
A) There are ___or ___ carriers in GSM.
B) Each carrier is shared by up to __ (FR), __ (HR) users.
C) Each frame is divided into ______ Time Slots, and each Time Slot with duration of __ms.
7- The main purpose of using BTS900 is for__ __, while using BTS1800 for __ ____.
8- __ __Cells are the main type of cells used for covering densely populated areas and hotspots.
9- In a ___ handoff, a mobile station only communicates with one base station, hence in a ____ handoff, a
mobile station can communicate with two base stations at the same time.
10- The main Common Control Channels are __ __, __, _ and _ (CBCH) ___.
11- The Operation mode___ __ uses separate frequencies for transmit and receive channels, while
___ __ mode uses different time slots for transmit and receive channels.
Good Luck
Name: - ……………………………………………………………………………………………………… Time: - 1.5 Hours
Zain Sudan
NW/NOC Department
NMC Engineer Exam