Академический Документы
Профессиональный Документы
Культура Документы
III]
DONE AT
POWERLINE ENTERPRISE
BY
SUBMITTED TO
1
SIWES REPORT [YEAR
III]
Dedication
This report is dedicated to the Almighty God for seeing me through this
journey, to my family and best friend (study mate) for their unending
support in my studies.
2
SIWES REPORT [YEAR
III]
Acknowledgement
3
SIWES REPORT [YEAR
III]
Table of contents
Dedication……………………………………………………………………………..………..2
Acknowledgement……………………………………………………………………..……3
Table of content……………………………………………………………………….…...4-5
CHAPTER TWO……………………………………………………………………………..10
CHAPTER THREE…………………………………………………….………..…….……..12
3.3 Microprocessor………………………………….…………………………...12-13
3.4 Memory……………………………………………………..……...……..…….13-14
CHAPTER FOUR………………………………………………………………………...……19
4. Hardware Tools………………………….………………….…...……………..19-22
4
SIWES REPORT [YEAR
III]
CHAPTER FIVE……………………………………….…….……………..…….………..…24
CHAPTER SIX………………………………………………………..…………..…..….…..26
CHAPTER SEVEN…………………………………………………….…………………….29
7.0 My Experience……………………………………………..…………...…….....29
7.3 Conclusion…………………………………………………………………………29
5
SIWES REPORT [YEAR
III]
CHAPTER 3
The keyboard and mouse are the two most common input devices. The
computer performs different actions depending on the icons you click and
commands you type. The computer gives you nearly instant feedback,
moving a pointer on the screen as you move the mouse and displaying
characters as you type. Though the keyboard and mouse might seem
directly connected to the screen, the microprocessor oversees the whole
activity, receiving keystrokes from the keyboard, clicks from the mouse and
sending data to the screen.
A monitor is an output device that displays the results of the work done by
the microprocessor and other parts. The display screen consists of
thousands of small dots, called pixels, arranged in a rectangular grid. The
higher the number of pixels per unit area, the higher the resolution of the
screen or monitor. By turning the pixels or dots into different colours
aligned properly, the monitor's circuit forms text and graphic images you
can see.
The display screen is held together in most laptops by two side hinges
which have, connected to them proximity sensors that commands the
laptop to sleep, hibernate, “do nothing, or shut down when closed.
3.3 Microprocessor
6
SIWES REPORT [YEAR
III]
The microprocessor is a chip slotted into its socket in the mother board of
the computer and performs computation or calculations. The speed is rated
in gigahertz (GHz) which makes it possible to run a billion or more
instructions per second and can appear to run many programs at the same
time. In reality, it runs only a few at a time, at most, but switches back and
forth rapidly between tasks. The processor does all the calculations thus the
constant heating up that requires immediate cooling, thus the introduction
of the cooling system made up the processor paste, heat sink and the fan.
7
SIWES REPORT [YEAR
III]
3.4 Memory
i. Hard disk / Drive: This is the internal permanent storage device. Writing and
reading information results from a mechanism which moves back and forth
across the platter's surface which stores data encoded as microscopic
magnetic pattern. Constant contact with the surface of the disk leads to
destruction of the disk and may lead loss of stored information. Because the
disk stores data magnetically, the computer can rewrite it with new data
indefinitely, and the data remains intact after you turn the power off.
8
SIWES REPORT [YEAR
III]
ii. Random Access Memory: This is an internal temporary high speed storage
device. The computer uses random access memory, or RAM, as a high-
speed working storage space for programs, documents and the
intermediate results of calculations. Character for character, RAM storage is
about a thousand times more expensive than hard drive space, though it is
more than a thousand times faster. It is faster because it consists of millions
of tiny transistors that store data as electric charges; the electricity moves
at nearly the speed of light. RAM is called "volatile storage" because it can
hold data only while the power is on.
The sound card is incorporated in the mother board and can input audio as
well as produce sound with the aid of the connected speaker. The computer
stores representations of sound as long strings of numbers; a graph of the
numbers would resemble sound waves. The microprocessor sends the
sound card these number strings, which the card turns into electrical waves
you hear as sound through speakers or headphones. The sound card can
also turn audio from a microphone or other source into number strings,
which it passes to the microprocessor. Internally, the computer treats
sound as numbers, making the storage, processing and playback of music
straightforward and accurate. A typical sound card usually has four ports. A
personal computer sound card is placed into the PCI (Peripheral Component
Interconnect) slots of a mother board.
9
SIWES REPORT [YEAR
III]
The graphic card like the microprocessor(s), performs a lot of actions thus
producing a lot of heat which needs to be dissipated away from the system.
To conduct the heat away, the heat sink is connected to the graphic card
with an intermediate paper-like conductor to ensure maximum heat
transfer from the graphic card to the heat sink, which is then mechanically
blown away by the fan.
10
SIWES REPORT [YEAR
III]
to say that the motherboard is the central piece of a PC, the component
that brings it all together. The mother board is basically the physical model
of the designed complex computer circuit which has in it the basic
components of all electronic components with the addition of a lot more. It
can also be called system or logic board.
11
SIWES REPORT [YEAR
III]
2. Capacitors: The capacitor keeps the system running briefly during the
period of change over from AC ( charging current) to DC(battery or UPS).
3. CMOS battery: This is used to keep the board alive and also keep time
and date running when the system is turned off.
5. Connectors: These are insulated conductors used to transfer data from one
component or point to another.
12
SIWES REPORT [YEAR
III]
and to provide physical structure to support the CPU, and heat sink. It also
forms an electrical interface between the CPU and the PCB.
9. Video Card Slot: It is situated at the right below the processor. High-end
gaming motherboards come with multiple video card slots, allowing the
installation of multiple video cards for improved graphics.
10. Expansion Slots: Expansions have the role of letting you install additional
components to enhance or expand the functionality of your PC. These
ports are located under the video card slot, and come in the form of PCI
slots (on older motherboards) or a scaled-down version of PCI-Express
slots (on newer motherboards).
11. IDE (Integrated Device Electronics) and SATA (Serial Advanced Technology
Attachment) ports: IDE and SATA ports are used to provide connectivity
for the storage devices and optical drives. The IDE is much slower and an
older connector to the SATA, thus being outdated.
12. BIOS (Basic Input and Output System) chip and battery: The BIOS chip
contains the basic code needed to take your computer through the boot
process, up to the point where the operating system takes over. Since the
BIOS code is stored on a memory chip that needs constant power to
function, a battery is also present to keep the chip powered when the
computer is unplugged.
13
SIWES REPORT [YEAR
III]
coordinating the data flow between the processor and peripherals such as
sound cards or network cards.
CHAPTER 4
14
SIWES REPORT [YEAR
III]
15
SIWES REPORT [YEAR
III]
16
SIWES REPORT [YEAR
III]
17
SIWES REPORT [YEAR
III]
4.2 Software Tools: Like hardware tools, there are a variety of software
tools that can be used to help technicians pinpoint and troubleshoot problems.
Many of these tools are free and several come with the Windows operating
system. Examples are;
i. Disk Management tools: Initializes disks, creates partitions, and
formats partitions.
ii. ScanDisk : Checks the integrity of files and folders on a hard drive by
scanning the file system. These tools might also check the disk
surface for physical errors.
iii. Disk Cleanup: Clears space on a hard drive by searching for files that
can be safely deleted.
18
SIWES REPORT [YEAR
III]
CHAPTER 5
19
SIWES REPORT [YEAR
III]
ii. Wear the anti-static wrist band and attach the metal clip on the
metal part of the system.
iii. Unscrew the back body nuts and open the back.
iv. Remove the hard disk.
v. Unscrew body bearing in mind the different positions of the
screws.
vi. Remove keyboard.
vii. Detach the screen from the hinges.
viii. Detach disk drive and RAM
ix. Unscrew the upper body to see more components to unscrew.
x. Remove speaker, RAM, microprocessor(s) and graphic card and
the connectors.
After formatting a system, all the drivers have to be installed back. Example of
software packages that provide system drivers are DriverPack and
DriverIdentifier. The procedure is thus explained;
20
SIWES REPORT [YEAR
III]
CHAPTER 6
6.0 BASIC COMPUTER FAULTS AND SOLUTIONS
i. Heating up of the system:
Possible Causes
a. Dormant fan.
21
SIWES REPORT [YEAR
III]
22
SIWES REPORT [YEAR
III]
CHAPTER 7
7.0 MY EXPERIENCE
24
SIWES REPORT [YEAR
III]
25