Академический Документы
Профессиональный Документы
Культура Документы
M
From this information, we engineer oven systems that produce the highest
Y
quality finishing results.
CM Convection Oven Systems The heart of our Test Lab is a production-scale infrared oven system that can
CIS Convection Ovens were designed and manufactured
be configured for any part size. The lab also has a spray booth with
MY
Cure Requirement onto a coated part, the IR energy is absorbed directly by the
coating. From an energy use standpoint, this contrasts favorably
Catalytic convection ovens distribute heat evenly, and are well-suited to parts
with complex shapes. Heat energy is moderate, rather than high intensity, so
with convection, which requires the substrate to be heated in convection is compatible with most substrates.
order to cure the powder.
Dry Off Ovens
CIS has more than a half-century of experience adapting Catalytic dry off ovens efficiently dry parts, regardless of metal gauge.
About Us
advanced infrared curing technology to companies who need an Infrared energy heats the substrate faster than other methods, and the infrared
Catalytic Industrial Systems manufactures industrial cure oven systems
efficient, highly uniform cure. Our engineering team can design a energy that is radiated matches the absorption spectrum of water.
that meet the needs of industry worldwide.
system that will generate the precise energy distribution
Catalytic dry off ovens also have excellent safety characteristics. There are no
Our mission is to understand your process and facility, and to work with necessary to achieve a uniform cure for all of the components you process, and all of the coatings you apply.
lamps, quartz tubes, or flames - only clean catalytic infrared heat.
you to engineer the most efficient, most cost-effective way to achieve your
Later, if you introduce a new material, or change your coating, product weight or shape – or if you want to
C
M process goals.
increase line speeds, we can show you how a Catalytic infrared curing oven can quickly adapt to new Key Standard Features for CIS Ovens
Y
flexibility of use, operational expense, maintenance, and environmental Powder Coating Ovens: • Electrical installation in accord with NFPA pressure regulators, high and low
CY
Combination Infrared / Convection 70, National Electrical Code safety switches, modulating gas
CMY
factors. Our ovens are easy to install and have a long track record of valves. Gas plumbing, fittings and
They are “the best of both worlds” for facilities that process a • All wires marked for ease of contractor valves meet requirements for NFPA
K success in OEM facilities, job shops and military installations. wiring 54, National Fuel Gas Code.
variable mix of parts.
• Heater zones piped in loops for even gas • PLC-monitored
Catalytic ovens are engineered for decades of maintenance-free service. flow and pressure
In a combination oven, the infrared portion sets the powder • Purge cycle before startup
Many have been in continuous use for 25 years or more without requiring • Control panel systems are protected by
coating, which accelerates the cure ahead of the convection soak circuit breakers. • Exhaust and recirculation fans
overhaul or repair.
CIS provides The Catalytic Team is committed to continuous improvement in every
portion that completes the cure. The infrared energy used in this
ramp-up zone also prevents powder loss by setting the finish
oven curing solutions Area Heating
facet of our work, from development and engineering through before it can be disturbed by the air turbulence in the convection
OEMs
Flameless gas catalytic infrared heaters are ideally suited for hazardous
for
manufacturing and installation. section. And, it helps prevent cross-contamination in facilities
areas. CIS manufactures them for paint rooms, facilities that use powdered
that use multiple powders.
WORLDWIDE. metals, chemical storage areas, and areas where flammable or explosive
The use of infrared ahead of convection cure also reduces total materials are present.
energy use. Infrared energy heats just the coating and the product surface, to the temperature level where
CIS area heaters are a leading choice for transit fueling and maintenance
convection is effective, reducing cycle time and utility costs.
facilities (”bus barns”). They are approved for areas where fuels and fuel vapors
Infrared Retrofits require rated hazardous area heaters to protect workers and equipment.
An infrared retrofit is a cost-effective alternative to a new system when an existing oven is unable to cure products
properly due to increased production demands or a change in coating.
CIS-TriFold_PressReady.pdf 1 10/2/15 11:01 AM
M
From this information, we engineer oven systems that produce the highest
Y
quality finishing results.
CM Convection Oven Systems The heart of our Test Lab is a production-scale infrared oven system that can
CIS Convection Ovens were designed and manufactured
be configured for any part size. The lab also has a spray booth with
MY
Cure Requirement onto a coated part, the IR energy is absorbed directly by the
coating. From an energy use standpoint, this contrasts favorably
Catalytic convection ovens distribute heat evenly, and are well-suited to parts
with complex shapes. Heat energy is moderate, rather than high intensity, so
with convection, which requires the substrate to be heated in convection is compatible with most substrates.
order to cure the powder.
Dry Off Ovens
CIS has more than a half-century of experience adapting Catalytic dry off ovens efficiently dry parts, regardless of metal gauge.
About Us
advanced infrared curing technology to companies who need an Infrared energy heats the substrate faster than other methods, and the infrared
Catalytic Industrial Systems manufactures industrial cure oven systems
efficient, highly uniform cure. Our engineering team can design a energy that is radiated matches the absorption spectrum of water.
that meet the needs of industry worldwide.
system that will generate the precise energy distribution
Catalytic dry off ovens also have excellent safety characteristics. There are no
Our mission is to understand your process and facility, and to work with necessary to achieve a uniform cure for all of the components you process, and all of the coatings you apply.
lamps, quartz tubes, or flames - only clean catalytic infrared heat.
you to engineer the most efficient, most cost-effective way to achieve your
Later, if you introduce a new material, or change your coating, product weight or shape – or if you want to
C
M process goals.
increase line speeds, we can show you how a Catalytic infrared curing oven can quickly adapt to new Key Standard Features for CIS Ovens
Y
flexibility of use, operational expense, maintenance, and environmental Powder Coating Ovens: • Electrical installation in accord with NFPA pressure regulators, high and low
CY
Combination Infrared / Convection 70, National Electrical Code safety switches, modulating gas
CMY
factors. Our ovens are easy to install and have a long track record of valves. Gas plumbing, fittings and
They are “the best of both worlds” for facilities that process a • All wires marked for ease of contractor valves meet requirements for NFPA
K success in OEM facilities, job shops and military installations. wiring 54, National Fuel Gas Code.
variable mix of parts.
• Heater zones piped in loops for even gas • PLC-monitored
Catalytic ovens are engineered for decades of maintenance-free service. flow and pressure
In a combination oven, the infrared portion sets the powder • Purge cycle before startup
Many have been in continuous use for 25 years or more without requiring • Control panel systems are protected by
coating, which accelerates the cure ahead of the convection soak circuit breakers. • Exhaust and recirculation fans
overhaul or repair.
CIS provides The Catalytic Team is committed to continuous improvement in every
portion that completes the cure. The infrared energy used in this
ramp-up zone also prevents powder loss by setting the finish
oven curing solutions Area Heating
facet of our work, from development and engineering through before it can be disturbed by the air turbulence in the convection
OEMs
Flameless gas catalytic infrared heaters are ideally suited for hazardous
for
manufacturing and installation. section. And, it helps prevent cross-contamination in facilities
areas. CIS manufactures them for paint rooms, facilities that use powdered
that use multiple powders.
WORLDWIDE. metals, chemical storage areas, and areas where flammable or explosive
The use of infrared ahead of convection cure also reduces total materials are present.
energy use. Infrared energy heats just the coating and the product surface, to the temperature level where
CIS area heaters are a leading choice for transit fueling and maintenance
convection is effective, reducing cycle time and utility costs.
facilities (”bus barns”). They are approved for areas where fuels and fuel vapors
Infrared Retrofits require rated hazardous area heaters to protect workers and equipment.
An infrared retrofit is a cost-effective alternative to a new system when an existing oven is unable to cure products
properly due to increased production demands or a change in coating.
CIS-TriFold_PressReady.pdf 2 10/2/15 11:01 AM
Cure Requirement onto a coated part, the IR energy is absorbed directly by the
coating. From an energy use standpoint, this contrasts favorably
Catalytic convection ovens distribute heat evenly, and are well-suited to parts
with complex shapes. Heat energy is moderate, rather than high intensity, so
with convection, which requires the substrate to be heated in convection is compatible with most substrates.
order to cure the powder.
Dry Off Ovens
CIS has more than a half-century of experience adapting Catalytic dry off ovens efficiently dry parts, regardless of metal gauge.
About Us
advanced infrared curing technology to companies who need an Infrared energy heats the substrate faster than other methods, and the infrared
Catalytic Industrial Systems manufactures industrial cure oven systems
efficient, highly uniform cure. Our engineering team can design a energy that is radiated matches the absorption spectrum of water.
that meet the needs of industry worldwide.
system that will generate the precise energy distribution
Catalytic dry off ovens also have excellent safety characteristics. There are no
Our mission is to understand your process and facility, and to work with necessary to achieve a uniform cure for all of the components you process, and all of the coatings you apply.
lamps, quartz tubes, or flames - only clean catalytic infrared heat.
you to engineer the most efficient, most cost-effective way to achieve your
Later, if you introduce a new material, or change your coating, product weight or shape – or if you want to
C
M process goals.
increase line speeds, we can show you how a Catalytic infrared curing oven can quickly adapt to new Key Standard Features for CIS Ovens
Y
flexibility of use, operational expense, maintenance, and environmental Powder Coating Ovens: • Electrical installation in accord with NFPA pressure regulators, high and low
CY
Combination Infrared / Convection 70, National Electrical Code safety switches, modulating gas
CMY
factors. Our ovens are easy to install and have a long track record of valves. Gas plumbing, fittings and
They are “the best of both worlds” for facilities that process a • All wires marked for ease of contractor valves meet requirements for NFPA
K success in OEM facilities, job shops and military installations. wiring 54, National Fuel Gas Code.
variable mix of parts.
• Heater zones piped in loops for even gas • PLC-monitored
Catalytic ovens are engineered for decades of maintenance-free service. flow and pressure
In a combination oven, the infrared portion sets the powder • Purge cycle before startup
Many have been in continuous use for 25 years or more without requiring • Control panel systems are protected by
coating, which accelerates the cure ahead of the convection soak circuit breakers. • Exhaust and recirculation fans
overhaul or repair.
CIS provides The Catalytic Team is committed to continuous improvement in every
portion that completes the cure. The infrared energy used in this
ramp-up zone also prevents powder loss by setting the finish
oven curing solutions Area Heating
facet of our work, from development and engineering through before it can be disturbed by the air turbulence in the convection
OEMs
Flameless gas catalytic infrared heaters are ideally suited for hazardous
for
manufacturing and installation. section. And, it helps prevent cross-contamination in facilities
areas. CIS manufactures them for paint rooms, facilities that use powdered
that use multiple powders.
WORLDWIDE. metals, chemical storage areas, and areas where flammable or explosive
The use of infrared ahead of convection cure also reduces total materials are present.
energy use. Infrared energy heats just the coating and the product surface, to the temperature level where
CIS area heaters are a leading choice for transit fueling and maintenance
convection is effective, reducing cycle time and utility costs.
facilities (”bus barns”). They are approved for areas where fuels and fuel vapors
Infrared Retrofits require rated hazardous area heaters to protect workers and equipment.
An infrared retrofit is a cost-effective alternative to a new system when an existing oven is unable to cure products
properly due to increased production demands or a change in coating.
CIS-TriFold_PressReady.pdf 1 10/2/15 11:01 AM
M
From this information, we engineer oven systems that produce the highest
Y
quality finishing results.
CM Convection Oven Systems The heart of our Test Lab is a production-scale infrared oven system that can
CIS Convection Ovens were designed and manufactured
be configured for any part size. The lab also has a spray booth with
MY