U.S. DEPARTMENT OF COMMERCE
ENVIRONMENTAL SCIENCE SERVICES ADMINISTRATION
‘COAST AND GEODETIC SURVEY
Coast and Geodetic Survey Technical Memorandum USC&GSTM-4
Specifications for Horizontal Control Marks
LS. BAKER
Rockville,Md. .
April 1968 CL
Reprinted September 1976 \ -
neeThis menorandun provides the complete specification for
establishing and stamping horizontal control marks
established by this Agency.PREFACE
The purpose of horizontal contro] marks are to accurately and perma-
nently mark and reference point of precisely known latitude and longi-
tude. The identification mark or names that are stamped in each disk
must follow set rules to allow for properly identifying these stations
at a later date.
At each horizontal control station a group or set of marks are estub-
lished. These marks include the station mark for which the precise geo-
graphic position is known, reference marks for recovering or relocating
the station and an azimuth mark for use by local surveyors in obtaining
a starting azimuth.
iii