Академический Документы
Профессиональный Документы
Культура Документы
BY
DEPT OF ARCHITECTURE
Students Industrial Work Experience scheme is a program designed by the universityto expose
students to the practical aspects of his/her course of study. It involves theattachment of a
student to an organization in line with his/her respective course of study thatcan provide the
training and experience required in the industry, as these experience andtraining cannot be
obtained in the lecture rooms but the theoretical knowledge taught inlecture rooms shall be
applied by the student in real industrial situations.This training/work experience, is an essential
component in the development of the practical and professional skills required of each student
by their respective course of study and also stands as an aid to prospective employment. As a
student of mechanical engineering, i have been able to obtain.
The most relevant and effective practical industrial training and experience in a duration of six
months (6 months) having been exposed to practical in the fabricating yard and on-site
situations and activities from migliore construczione & tecniche (MC&T) with consultants in
Architecture, Engineering and Quantity surveying. The company’s principal areas of operations
include building design project management and buildingsupervision.Being
, S.K.P. international services limited has undertaken various projects just to mention a few as
listed below:
I was assigned as an industrial training student by the firm to the on-going PetroleumProducts
Pricing Regulatory Authority head office building project site to learn, observe andreport the
weekly construction activities, procedures and work progress carried out on the siteand make a
weekly presentation to the office on the architectural experience and knowledgeobtained on
the project.This report is therefore an illustration of the nature of works and activities carried
outon the Petroleum Products Pricing Regulatory Authority head office building project and the
nature of works done during the course of the industrial programme. It also provides adetailed
principle of building construction and some aspects of engineering in reference to building
technology and how they are applied practically in building construction.
ACKNOWLEDGEMENTS
My deepest appreciation and gratitude goes to God for his gift of life to me and strength to
journey through and to Arc. S.K. Popoola, the C.E.O., skp international services limited, for
giving me this very rare privilege and opportunity to learn and be trained under him and to the
entire staff S.K.P. international services limited for their tutelage, time, patience and support
inspite of all the ups and downs experienced during my training .Furthermore, my sincere
appreciation also goes to the entire staff of S.K.P. international services limited, for developing
in me an awareness of the general workplace, behaviour and interpersonal skills development,
and giving me the opportunity to get a feel of the work environment which has exposed me to
the architects responsibilities and ethics.
TABLE OF CONTENTS
CHAPTER 1
CHAPTER 2
•Electrical engineering
•Mechanical engineering
CHAPTER 3
•Site meetings
CHAPTER 4
•Conclusion
CHAPTER 1: About S.K.P. international services limited
INTRODUCTION TO SITE WORK
SAFETY FACTORS:
Safety is an important consideration at any construction site, but I was made to understand
that on a site with a high rise building, extra safety is of crucial importance and should be
everyone's primary concern because construction of buildings at great heights such as the OPIC
building in Abeokuta can be a dangerous activity. Safety is based on knowledge, skill, and an
attitude of care and concern .Thus safety factors includes all the measures carried out to
protect both the worker, consultants, contractors and all persons present on the site at every
given time from fatalities and injuries, and as well as minimize or eliminate all possible
construction hazards. This safety measures can also be applied to the safety of the building and
building materials from damage of any kind.
Safety precaution guide lines for workers and persons present on a construction site.
1. Proper clothing is as essential to safety. Wear clothes that are smart and
appropriate for the site work and weather conditions. Loose clothing is dangerous for
workers around power tools and equipment.
4. Suspension belts are of crucial importance for site workers working at very
high levels.
5. All exposed areas or parts of a building must be adequately protected with
temporary rail or supports and staircases must be protected with temporary balustrades.
6. A l l s c a f f o l d i n g t h a t i s e l e v a t e d 1 0 f e e t o r m o r e m u s t b e
e q u i p p e d w i t h a s a f e t y railing. All scaffolds must be equipped with a toe board to
eliminate the possibility that tools or debris will be kicked or pushed onto people below. A
scaffold must be designed to support four times the weight of the workers and the materials
resting on it.
7. Inspect all scaffolding each day before using it. Never use damaged or
defective equipment and avoid rusted parts since their strength is unknown. When erecting
scaffolding, provide adequate sills for the scaffold posts and use base plates. Use adjusting
screws, not blocks, when on an uneven grade. Make sure to plumb and level scaffolding and do
not force end braces when constructing the scaffolding.
8. U s e o n l y p r o p e r l y g r a d e d a n d i n s p e c t e d l u m b e r f o r
p l a n k i n g . I n s p e c t p l a n k i n g daily for splits and knots, and remove defective or
damaged planking.
10. A clean work place is a safe work place. This refers to the neatness and good order of the
construction site. Keep the site clear of danger as you work – remove nails from waste wood,
move trip hazards and obstacles, etc. They interfere with work and can constitute a hazard to
both the worker and other persons on the site.
11. Any unsafe conditions or practices that is observed should IMMEDIATELY be reported to
the site project manager.
12. Emergency medical care in form of first aid assistance (first aid kit) must be provided on the
site and must be easily identifiable and nearby.
SITE LAYOUT CONSIDERATIONS
On the construction site, it was observed that certain site layout considerations were observed
so that items such as temporary structures, stationary plants, stores, toilets(conveniences) and
materials are placed in the most strategic and convenient positions. These considerations are
stated below:
Temporary access to the site requiring access both through and fro the site. Route to and from
the site must be checked in other to select the best suitable for transporting equipment and
materials to the site. Circulation on site for deliveries must be carefully considered.
CHAPTER 2
The Construction techniques and terms described in this report involves the
various methods of construction carried out in the course of building
construction for both structural and non-structural elements of the building. While onsite,
certain terms were used during the construction. These terms could be referred to
as technical terms or site terms or language being used by the site workers. As an
architect, a d e q u a t e k n o w l e d g e o f t h e s e t e r m s m u s t b e p a i d
a t t e n t i o n t o i n o r d e r c o m m u n i c a t e effectively with the workers. Below are
some site terms and definitions..
BLOCKWORK
This is the process of laying concrete masonry units to form either external walls as in-fills or
lock wall which are load-bearing or non- load bearing or internal walls as partitions. These
masonry units are commonly hollow sand-crete blocks which are much economical per unit of
wall area. The standard sand-crete block wall is explained below;
•The first course of blocks for a lead is laid on the mortar. The mortar for the head joint is
applied to the end of each block with the trowel before the block is laid.
•The lead is built higher. Mortar is normally applied only to the face shells of the block and not
to the webs.
•As each new course is started on the lead, its height is checked with either a folding rule or a
story pole marked with the height of each course.
•The course between the leads are laid rapidly by aligning each block with the stretched line.
•The last block to be installed in each course of infill blocks, the closer must be inserted
between blocks that have already been laid then the block is lowered carefully into position.
PLASTERING
Plastering is the most common treatment for external and internal walls to help withstand
weather conditions. Plasters are used to render, run an uneven surface into a smooth level
surface. Plaster is a mixture of sand and cement at a ratio of 4:1 or 3:1(i.e. 8/6 head pans to1
bag of cement). Plastering is also used to correct mistakes and to provide a smooth surface area
for other finishing types like painting.
FLOATING
Floating is the backing coat that is usually made of plaster such as Plaster of Paris(P.O.P)
that provides a true or smooth surface for the final finishing coat on a wall after plastering has
been carried out on a wall surface. Most importantly, floating is carried out on wall surfaces to
fill up all uneven areas on a wall surface and may be applied on the internal or external surface
of walls, and also on ceilings. On majority of the sites I went to, all the internal walls were
floated with P.O.P after cement plastering was done.
SCAFFOLD
A Scaffold is a temporary framework used to support people and material in the construction or
repair of buildings and other large structures. It is usually a modular system of metal pipes,
although it can be made out of other materials. The purpose of a working scaffold is to provide
a safe place of work with safe access suitable for the work being done. All scaffolds must be
equipped with a toe board to eliminate the possibility that tools or debris will be kicked or
pushed onto people below. A scaffold must be designed to support four times the weight of the
workers and the materials resting on it.
Erecting of scaffolds
Back on site, scaffolds were erected round the structure as seen in the picture to enable works
to be carried out at various parts of the building and at various heights.
piccccccccccccccccccccccccccccccttttttttttttttttttttttuuuuuuuuuuuuuuurrrrrrrrrrrrrreeeeeee
FORMWORK
Concrete must be given form by casting it in a mould. These moulds are known as ‘’formwork’
or ‘’shuttering’’.
A Formwork is the term given to either temporary or permanent mould into whichconcrete or
similar materials are poured.
Shutters are another type of formwork made of steel metal also known as shutters panels.
They are flat metal panels made of steel which are assembled together to make the complete
formwork and are specially used to cast concrete columns in high rise reinforced concrete
frame structures. They are usually tight enough to prevent the loss of fine materials. Erection of
the shutters are usually orderly, simple and all the units are of sizes that can be easily handled.
It gives the column a smooth face.
TILING
Tiling in general terms can be defined as the cladding of a surface. We have floor tiling and wall
tilling (both external and internal walls). For example, the female hostel porter’s lodge at
university of agriculture, abeokuta (UNAAB),the toilet walls were laid with ceramic tiles. The
floor was tiled with vitrified ceramic tiles.
piiiiiiiiiiiiiiiiiiiiiiiiiiicccccccccccccccccccccccccccccctttttttttttttttttttttttuuuuuuuuuuuurrrrreee
•Vitrified tiles: these are tiles with the same properties all through, i.e. when wearing occurs,
the subsequent layers have the same texture, density and material. They are mainly used for
external walls and floors.
•Ceramic tiles: these tiles are made with clay and laminated surfaces, they are usually used for
toilets and kitchen tilling. Surface finish for tiles are either glazed or unglazed and the material
used for making the tiles include stones, clay, and plastics, etc.
CURTAIN WALL
Curtain walls are glass walls typically designed to span multiple floors and allow the penetration
of day light into the building envelope, resist air and water infiltration, and provide an
architecturally pleasing façade of a building. They carry no dead-load the building other than its
own dead load, but rather transfer the horizontal loads applied to it. These loads are
transferred to the main building structure through connections at floors or columns of the
building.
CURTAIN WALL FRAMES
Curtain wall frames are made of extruded aluminium frames known as aluminium extrusions.
They are factory made and designed in units and assembled unit by unit on site.
When fixing curtain wall frames, the frames are screwed to the floor slab made of mass
concrete with an electrical power drill and also screwed to the top which is the soffit of the
floor slab.
PARAPET WALL
A parapet wall is a protective wall constructed on the perimeter edge/area of a roof slab to
protect rain water accumulation on the gutter /drainage of the roof slab from draining down
the sides of a building. It is usually of reinforced concrete and cast-in-situ. On site, a parapet
wall was constructed to a height of 1.0m.
ROOF GUTTER
Roof gutter is the drainage path created on a flat roof slab to channel accumulated rain water
for the roofing sheet into the drainage pipes on the roof slab.
DRAINAGE PIPES
Drainage pipes are pipes installed on the roof slab to drain rain/storm water on roof slab. They
are channelled through the roof beams and connected to the exterior columns which are then
sent down to the inspection chamber. They are made of PVC plastic pipes and are100mm in
diameter width.
FELTING
Felting of a roof slab involves the protection of the exposed concrete surface of the roof from
water penetration and infiltration, and all forms of damp and moist actions by laying a thick
damp proof membrane on the roof slab. One of the most common felts applied on roof slab sis
the bituminous felt. It is hot –mopped with asphalt to create a strong damp proof membrane.
……........................................................
BUILDING SERVICES
In the construction of any building, there are two main services that must be provided in the
building in order to create a comfortable and habitable internal building environment for the
building occupants. These services are divided into two main branches namely:
ELECTRICAL TERMINOLOGIES
This term is used to describe the fixing of PVC pipes of 13mm diameter called ‘Conduit Pipes’
and circular boxes before casting of the floor slab is done. The circular boxes are outlets for the
lighting points while the wires are passed through the conduit pipes.
As illustrated here>>>>>
the conduit pipes have already been laid prior to the floor screeding.
Trunking
This is a term used to denote a protective casing for wires. There are two common types.
•Cable tray
•Cable basket
Central air conditioning is an air conditioning system which uses ducts to distribute cooled
and/or dehumidified air to more than one room, or uses pipes to distribute chilled water to
heat exchangers in more than one room, and which is not plugged into a standard electrical
outlet. Central air conditioning performs like a regular air conditioner but has several added
benefits. When the air handling unit turns on, room air is drawn in from various parts of the
building through
Return-air ducts: This air is pulled through a filter where airborne particles such as dust and lint
are removed. Sophisticated filters may remove microscopic pollutants as well. The filtered air is
routed to air supply ductwork that carries it back to rooms. Whenever the air conditioner is
running, this cycle repeats continually because the central air conditioning unit is located
outside the office spaces, it offers a lower level of indoor noise than a free-standing air
conditioning unit.
•Wet system
•Dry system.
WET SYSTEM.
The wet system consists of reducers and sprinkler heads.
EXPANSION JOINT
Expansion joints are structural joints in a building that are created to allow for the thermal
expansion and contraction of a building that occurs in concrete when loaded. In the
construction of fence that I witnessed, the expansion joints were created uniquely for this
purpose. The expansion joints were created right from the foundation up to the roof level of
the building. They are created to accommodate structural movements.
CONCRETE
Concrete is a mixture of coarse and fine aggregates, cement and water which is allowed to harden.
Coarse aggregate used on site is normally gravel and Fine aggregate is sand.
Concrete mixes/ratio:
On site, before any concrete is cast into the formwork or mould, a slump test is always carried
out on it to test for its consistency and quality check to determine the desired degree of
workability. Freshly mixed concrete is an unstable mixture of solids and liquids. If it is vibrated
excessively, and dropped from a height, it is likely to segregate, which means that the coarse
aggregate work sits way to the bottom of the form and the water and cement paste rise to the
top. The result is concrete of non-uniform and with unsatisfactory properties.
‘’Curing of concrete’’
Concrete cures by hydration and not by drying. Thus, it is essential that the concrete must be
moist until its required strength is achieved. Maximum strength for concrete is attained after
28days(4 weeks) of curing. If it is allowed to dry at any point during this timeframe, the strength
of the cured concrete will be reduced and its surface hardness and durability are likely to be
adversely affected.
REINFORCEMENT BARS
Concrete has no useful tensile strength and is limited in its structural uses. Steel reinforcement
bars are used in concrete columns beams, and slabs. Reinforcement bars have various diameter
sizes. They come in 12mm,16mm 18mm, 20mm 24mm 30mm and 32mmdiameter sizes.
CASTING
Casting is the process of pouring concrete mix into a mould or form laid with reinforcement
bars to form a solid mass structure.
•Vertical reinforcing bars are first wired to the dowels that project from the foundation footing
and horizontal bars are wired to the vertical bars as seen in the illustration below.
•The formwork is erected. Sheets of plywood form the face of the concrete and are supported
by wooden studs. The studs are supported against the pressure of the wet concrete by
horizontal supports.
SITE MEETINGS
During my training, site meetings were held every two weeks on a Tuesday. The essence of the
site meetings is dissipating instructions to the contractors and to assess the progress of the
project. The site meeting is chaired by the project architect who gives out all instructions.
During the meetings, all the consultants are expected to be present in order to obtain an
update of a weekly report on each of their jurisdictions as regards the building project from the
contractors. Issues from what material should be used to the ordering of materials and
expenses made are discussed in full length and all issues or problems encountered are
presented to the architect for instructions. After a few site meetings, my supervisor handed
over the task of writing the minutes of the meeting to me. This i did until my last site meeting
on the site. During the meeting, everyone is presented with their copy of the minute and is
expected to file them afterwards. The site meeting for the building project is expected to be
held till the project is completed and handed over to the clients.
CHAPTER 4
CONCLUSION