Академический Документы
Профессиональный Документы
Культура Документы
Hydrotite is a world renowned hydrophilic SikaSwell A (formerly Duroseal Gasket) is Swellstop is a flexible butyl rubber and
waterstop. Composed of modified chloroprene a water-swelling acrylate-ester that expands swellable clay waterproofing compound that
rubber protected with a special delay coating, upon contact with water to form a compression expands upon contact with water to form a
Hydrotite expands when exposed to water, seal in nonmoving concrete joints. SikaSwell compression seal in nonmoving concrete
creating an effective compression seal within A is a available in three sizes and is adhered joints. Swellstop is available in two sizes and
joints where limited movement will occur. to varying substrates with Sika MK Adhesive must be used in conjunction with Swellstop
Hydrotite is used extensively in sealing concrete or Quellpaste Type E. Primer Adhesive to create a watertight bond.
construction joints, pipe penetrations, precast
concrete segments, tunnel lining segments and As with all hydrophilic waterstops, Hydrotite, SikaSwell A and Swellstop are suggested
for repair of existing joints or retrofit applications. for applications where exposure to moisture is constant.
Several shapes and sizes are available.
Sika Greenstreak offers SikaFuko® VT injection
hose, the world's number one injection hose system.
SikaFuko® VT systems are available in two sizes and
can deliver Portland Cement, Microfine Cement, or a
variety of resins to seal cracks or voids in the joint area.
SikaFuko® VT has a unique "re-injectable" design,
which allows the hose to be cleaned. This key feature
allows for a complete maintenance program if leaks
Waterstops
appear and future re-injections are required. For 60 years, Sika Greenstreak has been the leading source for
joint sealing technologies and innovative products for concrete.
Lockstop is a single component and self- SikaFuko® Eco 1 (formerly Duroject) is an injection
Offering a variety of solutions across all categories of waterstops,
sealing mastic waterstop which bonds to hose for delivering cements or resins for planned
concrete to prevent moisture from penetrating sealing of construction joints. It is for single injection Sika Greenstreak has the knowledge and time tested products
nonmoving joints. Lockstop must be used in applications. Sika Greenstreak offers a variety of to meet the most demanding applications.
conjunction with Lockstop Primer Adhesive injection materials for SikaFuko® VT injection hose
to create a watertight bond. systems. ■■ Water/Waste Water Treatment Plants
■■ Lock and Dam Systems
Most Strip-applied waterstops and Injection Hose Systems are suitable for nonworking joints only. ■■ Reservoirs and Aqueducts
■■ Flood Walls
LIMITED WARRANTY: Sika Greenstreak warrants this product for one year from date of installation to be free from manufacturing defects and to meet the technical properties on ■■ Retaining Walls
the current Technical Data Sheet if used as directed within shelf
Thelife.
of
User determines
information,
labor or cost of labor.
suitability
and in particular,
NO
the of
OTHER
product for intended
recommendations
WARRANTIES
relatinguse
EXPRESS OR
andapplication
to the assumes and
IMPLIED
all risks.
SHALL
end-use
APPLY
Buyer’s sole
of Sika
INCLUDING
remedyareshall
products,
good faith based on Sika’s current knowledge and experience of the products when properly stored, handled and applied under
limited to the purchase price or replacement of product exclusive ANY
bein
given
WARRANTY
■■ Foundations
OF MERCHANTIBILITY OR FITNESS FOR A PARTICULAR PURPOSE.
normal conditions, within their shelf life. In practice, the differences in materials, substrates and actual site conditions are such that
SIKA SHALL
no warranty NOT
in respect BE LIABLE UNDER
of merchantability ANY LEGAL
or of fitness THEORYpurpose,
for a particular FOR SPECIAL
nor any OR CONSEQUENTIAL
liability DAMAGES.
arising out of any Sika
legal relationship ■■ Tunnels and Culverts
■■
whatsoever, can be inferred either from this information, or from any recommendations, or from any other advice offered. The
Greenstreak SHALL NOT BE RESPONSIBLE FOR THE USE OF THIS PRODUCT IN A MANNER TO INFRINGE ON ANY PATENT OR ANY OTHER INTELLECTUAL PROPERTY RIGHTS HELD
proprietary rights of third parties must be observed. All orders are accepted subject to our current terms of sale and delivery. Users Bridge Abutments
BY OTHERS.
■■
should always refer to the most recent issue of the Product Data Sheet for the product concerned, copies of which will be supplied
on request or can be accessed in the Internet under www.sika.ca. Containment Structures and Tanks
Our most current General Sales Conditions shall apply.
Sika Canada Inc.
Sika Greenstreak® ■■ Slabs-on-Ground
Please consult the Product Data Sheet prior to any use and Other
Head Office processing.
locations 3400 Tree Court Industrial Blvd.
601 Delmar Avenue
Pointe-Claire, Quebec
Toronto
Edmonton
St. Louis, Missouri
1-800-933-SIKA 63122 USA
An ISO 9001 certified company
When you specify Sika Greenstreak, you are specifying the first
H9R 4A9 Vancouver w w w . s i Phone
k a . c a 800 325-9504
Pointe-Claire: ISO 14001 certified EMS
name in waterstops and the trusted source for superior technical
Fax 800 551-5145
and customer service.
www.Greenstreak.com
Greenstreak ®
September 2012 Greenstreak ®
C h o o s e T h e R i g h t Wa t e r s t o p Fabrications/Splicing Irons
Waterstop Basic Use Typical PVC Fabrications
Embedded in concrete, across and/or along the Sika Greenstreak strongly recommends factory fabricated transitions and intersections. Typical fabrications for the most common
joint, waterstops form a watertight diaphragm that shapes are inventoried by Sika Greenstreak and available to meet construction schedules. Sika Greenstreak can provide customized
prevents the passage of liquid through the joint. fabrications to suit unusual configurations or a convergence of differing profiles.
Ribbed with Centerbulb shapes are the most versatile type of waterstops
available. The centerbulb accommodates lateral, transverse, and shear
movement. Larger centerbulbs will accommodate greater movement. Chemical Resistant Waterstop
Sika Greenstreak's companion brand, Westec®, offers waterstop solutions for secondary containment
Tear Web shapes accommodate large movements. When joint in petrochemical and industrial applications. Westec's Envirostop® TPER (Thermoplastic Elastomeric
movement occurs, the tear web ruptures and allows the U-bulb to Rubber) Waterstops resist a wide range of oils, solvents, and aggressive chemicals. Alcohols, ketones,
deform without placing the material in tension. glycols, esters and aqueous solutions of acids, bases, and salts have little effect on Westec TPER
Waterstop.
Dumbbell with Centerbulb shapes accommodate lateral, transverse, TPER has excellent ozone resistance, low temperature flexibility, excellent high temperature (up to
and shear movement. Larger centerbulbs will accommodate greater 250° F) performance and is heat weldable. Westec TPER Waterstop can also be defined as a
movement. Consider using Ribbed with Centerbulb for better sealing Thermoplastic Vulcanizate, TPV.
characteristics.
Base Seal with Tear Web shapes accommodate lateral, transverse,
and shear movement. Larger tear web bulbs will accommodate
Westec's TPER Waterstop is certified to NSF/ANSI Standard 61 for Drinking Water System Components
greater movement. Base Seal waterstops have some limitations with
transitions and intersections. Contact a Sika Greenstreak engineer or visit www.Chemstop.com for more information.
Greenstreak ®
2 11
Retrofit/Special Applications
Nonmoving Joints typically have 100% of the bonded steel reinforcement continuous through the joint, and expose the waterstop to
609 SYSTEM STD. WT. with hardware 2.92 lbs/ft 4.35 Kg/m
negligible or no movement. Flat waterstop profiles without a centerbulb or tear web are suitable for nonmoving joints. Other waterstop
NEW CONCRETE materials may be considered for nonmoving joints as well, such as strip-applied or injectable hose waterstops. Examples of waterstop
1/2" S.S. BATTEN BAR profiles suitable for nonmoving joints are as follows:
S.S. ANCHOR BOLT
3 3/16" Flat Ribbed shapes are preferred for nonmoving joints and
provide the best sealing characteristics.
EXISTING 3/8"
CONCRETE
EPOXY 7300
6"
Dumbbell shapes are an alternate profile for nonmoving joints.
655 SYSTEM STD. WT. with hardware 1.38 lbs/ft 2.05 Kg/m
Consider ribbed shapes for better sealing characteristics.
3"
NEW EXISTING
CONCRETE CONCRETE
Retrofit Waterstop Systems EPOXY
Base Seal is ideal for slab-on-grade joints or backfilled walls and are easy to form.
7/16" Base Seal waterstops have some limitations with transitions and intersections.
Retrofit waterstops seal joints where new construction 7300 3"
meets an existing structure and can be suitable for working
joints. Systems include waterstop profile, stainless steel S.S. ANCHOR BOLT
batten bars and anchor bolts. Epoxy 7300 is sold separately. S.S. BATTEN BAR Labyrinth is primarily used in vertical joints. Labyrinth shapes create a keyed joint
and do not require split bulkheads. Labyrinth can be difficult to use in horizontal
581 SYSTEM STD. WT. with hardware 1.51 lbs/ft 2.25 Kg/m 667 SYSTEM STD. WT. with hardware 8.27 lbs/ft 12.31 Kg/m joints and there are some limitations with transitions and intersections.
NEW 3 1/8" EXISTING
CONCRETE NEW CONCRETE S.S. BATTEN BAR
CONCRETE 7/8"
Split Flange shapes can simplify forming. The split flange is opened and
S.S. ANCHOR BOLT
EPOXY attached to the bulkhead for placement of the first concrete element. After
7300 6 3/8"
7/16" 3 11/16" stripping the bulkhead, the flange is closed and anchored for placement of
11/16"
the adjoining element. Split waterstops are suitable for straight runs only.
S.S. ANCHOR BOLT Transitions and intersections are not practical with these profiles.
S.S. BATTEN BAR EXISTING EPOXY
CONCRETE 7300
New Concrete
9" Waterstops for Retrofit Applications seal joints where new construction meets an existing
structure and can be suitable for moving joints. Systems include stainless steel batten bars
and fasteners for anchoring to the existing structure with the aid of an epoxy gel.
Specialty Shapes 729 STD. WT. .64 lbs/ft .95 Kg/m HEAD PRESS. 35' 105 KPa 770 STD. WT. 3.15 lbs/ft 4.69 Kg/m
300.0mm
These shapes have been developed to 1 1/2" 5” Mass.
20.0mm
meet unique requirements of clients or 38.1mm 52.0mm Existing Concrete Strip-applied Waterstops are adhered along concrete joints or
3/32" 87.0mm penetrations and encapsulated by a subsequent concrete placement.
other specifying groups. Consult a Sika 2.4mm
3/16" 6.0mm 57.0mm
Greenstreak engineer for more information 4.8mm 5" Hydrotite is the state of the art for hydrophilic waterstop and is a
127.0mm 3.0mm
or for special applications. 220.0mm high-performance, chloroprene rubber material that expands when
exposed to moisture to create a compression seal within and along
606 STD. WT. 2.92 lbs/ft 4.35 Kg/m 762 STD. WT. 1.51 lbs/ft 2.25 Kg/m HEAD PRESS. 100' 299 KPa 791 STD. WT. 0.86 lbs/ft 1.28 Kg/m HEAD PRESS. 35' 105 KPa
the joint. For less critical applications, Sika Greenstreak also offers
5/16" ID & 15/16” OD 1/8" SikaSwell A and Swellstop expanding waterstops.
7.9mm ID & 23.8mm OD
1/8" 3/4" Soil Conservation Service Type F 3.2mm
3.2mm 1/8"
19.1mm S 2 1/8"
1/2" 10.0mm 9.5mm 3.2mm 54.0mm
12.7mm 2 1/4"
Product and Material Options
3 1/2" 22.0mm 57.1mm
88.9mm
1/2" 5 1/4"
12.7mm 127.0mm 133.4mm
6"
152.4mm Sika Greenstreak has the industry's most comprehensive collection of
waterstop products and solutions to meet the most demanding applications.
650 STD. WT. 1.64 lbs/ft 2.44 Kg/m 765 STD. WT. .64 lbs/ft .95 Kg/m 792 STD. WT. 1.10 lbs/ft 1.63 Kg/m HEAD PRESS. 35' 105 KPa
W1-2 Calif.
This catalog is primarily dedicated to PVC (polyvinyl chloride) waterstops, but
2 1/2" 1/4" 1/8" 3/16" 1/8" general information is included for chemical resistant waterstops (TPER, PE,
6.4mm 2 1/8" 2"
63.5mm 54.0mm 3.2mm 4.8mm
1/8"
3.2mm 50.8mm 3 1/8" Stainless Steel), strip-applied waterstops (Hydrotite, SikaSwell A, Swellstop,
8" 4" 3.2mm 79.4mm Lockstop) and for SikaFuko® Injection Hose Systems. Complete catalogs and
203.2mm 101.6mm 2 1/4"
57.1mm technical data for each of these products are available in print or online.
5 1/4"
133.4mm
waterstop for years. Sika Greenstreak has the knowledge, experience and desire to provide the highest quality joint sealing solutions and 3/16" 3/8" 3/4” ID & 1 1/8" OD
4.8mm 9.5mm 3/8" 19.1mm ID & 28.6mm OD 3/16" 1 3/16"
9.5mm 4.8mm
services available. 30.2mm
4"
PVC is the industry standard for flexible waterstops, which are typically embedded across and along the joint. PVC is the most versatile 101.6mm 9" 1 5/8"
228.6mm 3/16" 41.3mm
waterstop material, offering the broadest design selection and is accepted under the ACI 350 "Code Requirements for Environmental 4.8mm
Engineering Concrete Structures". It has great inherent elasticity and is resistant to many waterborne chemicals. It will not discolor 744 STD. WT. 0.63 lbs/ft 0.94 Kg/m HEAD PRESS. 65' 194 KPa 720 STD. WT. 1.20 lbs/ft 1.79 Kg/m HEAD PRESS. 100' 299 KPa 3 1/4"
82.6mm
concrete or produce electrolytic action. 3/16" 15/32" 1/8" 3/8” ID & 1/2" OD
4.8mm 11.9mm 3/16" 9.5mm ID & 12.7mm OD 3/32"
3.2mm 4.8mm 2.4mm
Sika Greenstreak offers the industry's widest array of PVC waterstop designs, typically ranging in widths from 4" to 12" and thicknesses 790 STD. WT. 1.24 lbs/ft 1.85 Kg/m HEAD PRESS. 50' 149 KPa
5"
from 1/8" to 1/2". Depending on size, most waterstop shapes are provided in 50 or 100 ft. coils. Please contact Sika Greenstreak for further 127.2mm 9"
228.6mm
1 3/16"
information or if you need assistance in selecting a waterstop. 30.2mm
746 STD. WT. 0.71 lbs/ft 1.06 Kg/m HEAD PRESS. 75' 224 KPa 721 STD. WT. .50 lbs/ft .74 Kg/m HEAD PRESS. 65' 194 KPa
1 5/8"
3/16" 5/16” ID & 7/16" OD 3/16"
Physical Properties Installation Aids and Fabrications 4.8mm 3/8"
9.5mm
3/16" 7.9mm ID & 11.4mm OD
4.8mm 3/32"
2.4mm
4.8mm
4 7/16"
41.3mm
6" 112.7mm
All Sika Greenstreak PVC waterstops are specially formulated PVC waterstops must be securely positioned in the forms to 152.4mm 4"
101.4mm
and manufactured to meet or exceed industry standard product prevent deflection or misalignment during concrete placement.
specifications. This is achieved by tying off the outer edge of the waterstop to 747 STD. WT. 1.11 lbs/ft 1.65 Kg/m HEAD PRESS. 100' 299 KPa 722 STD. WT. 1.90 lbs/ft 2.83 Kg/m HEAD PRESS. 150' 448 KPa
807 STD. WT. 2.00 lbs/ft 2.98 Kg/m HEAD PRESS. 50' 149 KPa
adjacent reinforcing steel. Sika Greenstreak offers options to 1/4" 5/8" 3/16" 3/8” ID & 3/4" OD 1/8"
15.9mm 3/8" 9.5mm ID & 19.1mm OD 3.2mm
6.4mm
Sika Greenstreak PVC Waterstop properly anchor PVC waterstop, including:
4.8mm 9.5mm
Greenstreak ®
4 9
Base Seal Base Seal Base Seal Ribbed Centerbulb Ribbed Centerbulb Ribbed Centerbulb
648 STD. WT. 1.21 lbs/ft 1.80 Kg/m HEAD PRESS. 100' 299 KPa 924 STD. WT. 1.45 lbs/ft 2.16 Kg/m HEAD PRESS. 125' 373 KPa 944 STD. WT. 1.30 lbs/ft 1.93 Kg/m HEAD PRESS. 125' 373 KPa 643 STD. WT. 0.58 lbs/ft 0.86 Kg/m HEAD PRESS. 50' 149 KPa 705 STD. WT. 1.19 lbs/ft 1.77 Kg/m HEAD PRESS. 125' 373 KPa 716 STD. WT. 1.55 lbs/ft 2.31 Kg/m HEAD PRESS. 125' 373 KPa
1/2" 3/4" 1 1/4" New York E 16.0mm 20.0mm 40.0mm 41.5mm 16.0mm 3/8" 1/4” ID & 11/16" OD USBR 3/8" 1/4” ID & 5/8" OD
12.7mm 4.0mm ID & 10.0mm OD Ontario 3/16" 6.4mm ID & 17.5mm OD 1/8" 1/4" 9.5mm 6.4mm ID & 15.9mm OD
19.1mm 31.8mm 5.0mm
Hydro 4.8mm 9.5mm 3.2mm 6.4mm
9/16" 20.0mm 3.0mm 20.0mm 4.5mm 3.0mm 10.0mm
1/8" 1/8"
3.2mm 14.3mm 3.2mm
7" TEAR WEB 4.5mm 100.0mm 6" 6"
177.8mm 200.0mm 200.0mm 152.4mm 152.4mm
771 STD. WT. 1.53 lbs/ft 2.28 Kg/m HEAD PRESS. 100' 299 KPa 925 STD. WT. 1.84 lbs/ft 2.74 Kg/m HEAD PRESS. 150' 448 KPa 959 STD. WT. 1.41 lbs/ft 2.10 Kg/m HEAD PRESS. 150' 448 KPa 644 STD. WT. 1.37 lbs/ft 2.04 Kg/m HEAD PRESS. 100' 299 KPa 706 STD. WT. 1.90 lbs/ft 2.83 Kg/m HEAD PRESS. 150' 448 KPa 717 STD. WT. 1.52 lbs/ft 2.26 Kg/m HEAD PRESS. 125' 373 KPa
25.0mm 18.0mm 50.0mm 1/2" 5/16” ID & 15/16" OD 1/2” ID & 1" OD
9/16" 5/32" 25.0mm 15.0mm 1/8" 3/8"
2"
50.8mm 14.3mm 4.0mm 18.0mm 50.0mm 8.0mm 5.0mm ID & 16.0mm OD Ontario
3/8"
9.5mm
12.7mm 7.9mm ID & 23.8mm OD 3.2mm 9.5mm
12.7mm ID & 25.4mm OD
Hydro 3/4"
3/4" 16.0mm
19.1mm 19.1mm
TEAR WEB 4.0mm 6"
9" 3.0mm 5.0mm 150.0mm 6"
228.6mm 250.0mm 250.0mm 152.4mm 152.4mm
772 STD. WT. 1.85 lbs/ft 2.75 Kg/m HEAD PRESS. 100' 299 KPa 927 STD. WT. .89 lbs/ft 1.32 Kg/m HEAD PRESS. 75' 224 KPa 960 STD. WT. 1.30 lbs/ft 1.94 Kg/m HEAD PRESS. 150' 448 KPa 645 STD. WT. 2.13 lbs/ft 3.17 Kg/m HEAD PRESS. 150' 448 KPa 707 STD. WT. 1.19 lbs/ft 1.77 Kg/m HEAD PRESS. 100' 299 KPa 718 STD. WT. 2.22 lbs/ft 3.30 Kg/m HEAD PRESS. 175' 523 KPa
9/16" 5/32" 3/4" Texas Hwy Ontario 3/4” ID & 1 1/4" OD
14.3mm 2" Type A 16.0mm 55.0mm 18.0mm 50.0mm 15.0mm 3/16" 1/4” ID & 1/2" OD 1/4" 3/8" 19.1mm ID & 31.9mm OD 1/8"
4.0mm 19.1mm 50.8mm 18.0mm 10.0mm 6.5mm ID & 18.0mm OD Hydro 6.4mm ID & 12.7mm OD 6.4mm 3.2mm
3/4" 4.8mm 9.5mm
19.1mm 20.0mm 4.5mm 3.0mm
4.0mm
9" 250.0mm 9"
228.6mm 150.0mm 228.6mm
9"
200.0mm 228.6mm
774 STD. WT. .79 lbs/ft 1.18 Kg/m HEAD PRESS. 75' 224 KPa 928 STD. WT. 1.32 lbs/ft 1.97 Kg/m HEAD PRESS. 125' 373 KPa 982 STD. WT. 1.15 lbs/ft 1.71 Kg/m HEAD PRESS. 125' 373 KPa
647 STD. WT. 0.92 lbs/ft 1.37 Kg/m HEAD PRESS. 100' 299 KPa 708 STD. WT. 1.45 lbs/ft 2.15 Kg/m HEAD PRESS. 125' 373 KPa 719 STD. WT. 2.05 lbs/ft 3.05 Kg/m HEAD PRESS. 150' 448 KPa
7/16" 7/16" Texas Hwy 40.0mm 16.0mm 1 1/8” ID & 1 1/2" OD
11.1mm 11.1mm 1/8" 3.9mm 1/8" 3/16" 5/16” ID & 9/16" OD New York A 1/4” ID & 5/8" OD 9” Mass. 1/4" 28.6mm ID & 38.1mm OD 1/8"
Type B 4.5mm 18.5mm 3.2mm 4.8mm 7.9mm ID & 14.3mm OD 3/16" 1/4" 6.4mm ID & 15.9mm OD 3/8"
3.2mm 20.0mm 4.8mm 6.4mm 3.2mm
6.4mm 9.5mm
3.0mm 195.0mm
7" 200.0mm 6"
177.8mm 152.4mm
9"
228.6mm 9"
775 STD. WT. 4.64 lbs/ft 6.91 Kg/m 929 STD. WT. 1.68 lbs/ft 2.49 Kg/m HEAD PRESS. 150' 448 KPa 990 STD. WT. 6.81 lbs/ft 10.14 Kg/m 228.6mm
9" C.O.E. 50.0mm 18.0mm 12.0mm 48.0mm 65.0mm 649 STD. WT. 1.28 lbs/ft 1.90 Kg/m HEAD PRESS. 100' 299 KPa 709 STD. WT. 1.63 lbs/ft 2.43 Kg/m HEAD PRESS. 175' 523 KPa 726 STD. WT. 3.97 lbs/ft 5.91 Kg/m HEAD PRESS. 200' 598 KPa
3/4" 228.6mm 5° 25.0mm 5/8” ID & 1" OD New York B 1/4” ID & 3/4" OD 1 1/4” ID & 2" OD
19.2mm 3/4" 3/8" 31.8mm ID & 50.8mm OD
12.0mm 1/4" 15.9mm ID & 25.4mm OD 3/16" 3/8" 6.4mm ID & 19.1mm OD 1/8"
3 1/2" 3.0mm 5.0mm 9.5mm 19.1mm 9.5mm
1/2" 250.0mm 6.4mm 4.8mm 3.2mm
12.7mm 88.9mm 400.0mm 1/8"
930 STD. WT. 2.04 lbs/ft 3.04 Kg/m HEAD PRESS. 175' 523 KPa
7"
3.2mm 9" 12"
7/8"
22.2mm
8" 50.0mm 95.0mm 18.0mm 177.8mm 228.6mm
304.8mm
203.2mm 25.0mm
776 STD. WT. .83 lbs/ft 1.24 Kg/m HEAD PRESS. 100' 299 KPa
696 STD. WT. 2.65 lbs/ft 3.94 Kg/m HEAD PRESS. 175' 523 KPa 710 STD. WT. 2.72 lbs/ft 4.05 Kg/m HEAD PRESS. 200' 598 KPa 731 STD. WT. 2.00 lbs/ft 2.98 Kg/m HEAD PRESS. 175' 523 KPa
923 STD. WT. 1.02 lbs/ft 1.51 Kg/m HEAD PRESS. 75' 224 KPa 939 STD. WT. 1.05 lbs/ft 1.56 Kg/m HEAD PRESS. 100' 299 KPa 926 STD. WT. 2.26 lbs/ft 3.36 Kg/m HEAD PRESS. 150' 448 KPa 704 STD. WT. .98 lbs/ft 1.46 Kg/m HEAD PRESS. 100' 299 KPa 714 STD. WT. 3.62 lbs/ft 5.39 Kg/m HEAD PRESS. 225' 672 KPa 738 STD. WT. 2.73 lbs/ft 4.06 Kg/m HEAD PRESS. 150' 448 KPa
EYELET 1 1/2” ID & 2" OD 3/4" 1/2" 1/16" 13.0mm 8.0mm ID & 18.0mm OD
38.1mm ID & 50.8mm OD 1/8" 1/8" 3/8" 19.1mm 1.6mm 5.0mm
3/8" EYELET 13.0mm ID EYELET 10.0mm ID & 16.0mm OD 3.2mm 9.5mm 1/2" 12.7mm
3.2mm 3.0mm 10.0mm 12.7mm
9.5mm 3.0mm 140.0mm
10.0mm
779 STD. WT. 0.86 lbs/ft 1.28 Kg/m HEAD PRESS. 100' 299 KPa 952 STD. WT. 1.32 lbs/ft 1.97 Kg/m HEAD PRESS. 125' 373 KPa 992 STD. WT. .92 lbs/ft 1.37 Kg/m HEAD PRESS. 100' KPa 1/8" 3/8" 1/2" 25.0mm 753 STD. WT. 3.10 lbs/ft 4.61 Kg/m HEAD PRESS. 150' 448 KPa
9.5mm
6.0mm
3.2mm 12.7mm EYELET 4.5mm 7.0mm 3.0mm 1" 3/4” ID & 1 1/2" OD
3/8" 19.1mm ID & 38.1mm OD
C.O.E.
3/16" 3/16” ID & 1/2" OD EYELET 4.0mm 3.5mm 14.0mm ID 25.4mm 9.5mm
4.8mm 4.8mm ID & 12.7mm OD 20.0mm 3.0mm EYELET 20.0mm 3.0mm
4.0mm
9" 250.0mm
6"
13.0mm ID 228.6mm 9"
152.4mm 200.0mm 228.6mm
200.0mm
781 STD. WT. .43 lbs/ft .64 Kg/m HEAD PRESS. 65' 194 KPa 958 STD. WT. 2.95 lbs/ft 4.39 Kg/m HEAD PRESS. 200' 598 KPa
754 STD. WT. 3.70 lbs/ft 5.51 Kg/m HEAD PRESS. 150' 448 KPa
780 STD. WT. 0.98 lbs/ft 1.46 Kg/m HEAD PRESS. 100' 299 KPa 953 STD. WT. 1.77 lbs/ft 2.64 Kg/m HEAD PRESS. 150' 448 KPa
30.0mm
3/4” ID & 1" OD 1/8" EYELET 2” ID & 2 3/4" OD C.O.E.
3/16" 19.1mm ID & 25.4mm OD EYELET 17.0mm ID 3.0mm 3/32" 3/16"
3.2mm
10.0mm 3.0mm 15/16" 3/8" 50.8mm ID & 69.9mm OD
4.8mm
4.5mm 7.0mm 3.5mm 2.4mm 4.8mm
25.0mm 23.8mm 9.5mm
50.0mm 55.0mm 4"
101.6mm
6"
152.4mm 250.0mm Ribbed Tear Web 250.0mm
788 STD. WT. 1.66 lbs/ft 2.47 Kg/m HEAD PRESS. 175' 523 KPa 954 STD. WT. 3.07 lbs/ft 4.56 Kg/m HEAD PRESS. 200' 598 KPa 698 STD. WT. 0.78 lbs/ft 1.16 Kg/m HEAD PRESS. 65' 194 KPa 782 STD. WT. .84 lbs/ft 1.25 Kg/m HEAD PRESS. 75' 224 KPa 970 STD. WT. 1.27 lbs/ft 1.89 Kg/m HEAD PRESS. 125' 373 KPa 9"
228.6mm
905 STD. WT. 3.80 lbs/ft 5.65 Kg/m HEAD PRESS. 260' 776 KPa 964 STD. WT. .63 lbs/ft .94 Kg/m HEAD PRESS. 50' 150 KPa 728 STD. WT. 2.68 lbs/ft 3.99 Kg/m HEAD PRESS. 175' 523 KPa 786 STD. WT. 2.07 lbs/ft 3.08 Kg/m HEAD PRESS. 175' 523 KPa 995 STD. WT. .54 lbs/ft .80 Kg/m HEAD PRESS. 65' 194 KPa 936 STD. WT. 1.71 lbs/ft 2.54 Kg/m HEAD PRESS. 125' 373 KPa