Академический Документы
Профессиональный Документы
Культура Документы
RF-1922
Features
Product Description
RF-1922 is a point-to-point and point-to-multipoint frequency-shifting repeater system that overcomes the antenna
isolation problem in conventional repeater system. The Master unit (MU) receives the GSM1900 donor signal via
direct coupling or wireless coupling, and translates it to another GSM1900 link frequency for transmission to the
Remote units (RU). The Remote units receive the link signal and translate it back to the original GSM1900 signal,
which are then transmitted to the service antennas.
The mapping of GSM1900 channels is user-defined through the OMT software. RF-1922 comes with separate
connectors for connection to external link and service antennas. Each RF-1922 can support two or four channel
frequencies and may be connected in parallel for higher number of channels. Remote units can incorporate external
air-combining using cross-polar antenna for increased output power.
Link Freq
f, F f, F
Link Link
Ant Ant Mobile
Point_to_Point f, F Ant
Using
Direct Coupling
Master Unit Master Unit Remote Unit
(Direct Coupling)
GSM Mobile
GSM BTS
Remote Unit
f, F f, F f, F
Point_to_Multipoint
using Donor Link Link
Link Freq
Wireless Coupling Ant Ant Ant Mobile
Ant
Master Unit
Master Unit
(Wireless Coupling)
Remote Unit
Remote Unit
GSM Mobile
GSM BTS
Information contained in this document is subject to confirmation at time of ordering. Issue: 20Feb06
http://www.comba-telecom.com Control: 1-0-0/B1
S-91890DJ, S-9180DH 1/3
Channel Selective - Frequency Shifting Repeater
RF-1922
Technical Specifications
Information contained in this document is subject to confirmation at time of ordering. Issue: 20Feb06
http://www.comba-telecom.com Control: 1-0-0/B1
S-9180DJ, S-9180DH 2/3
Channel Selective - Frequency Shifting Repeater
RF-1922
Using only a direct serial connection to a PC, installation and commissioning of the RF-1922 is accomplished with OMT,
and using the integrated wireless modem (data or SMS), equipment parameters can be monitored remotely.
Controlled equipment parameters include: Working Channel No, Translation Channel No, ATT, Soft PA ON/OFF,
Over-Temp Threshold, Alarm Report Enable.
Monitored equipment parameters include: LNA, PA, PLL Unlock, Power Down, PSU Fault, Over Temp, Chassis Lock, DL
Output Power Over/Low, UL/DL Output Power, Modem Receive Field Intensity
RF-1922 has been developed to take advantage of advanced network operation, the OMC (optional) is an effective
solution to monitoring a group of Comba products centrally.
Outline Drawing
600
Information contained in this document is subject to confirmation at time of ordering. Issue: 20Feb06
http://www.comba-telecom.com Control: 1-0-0/B1
S-9180DJ, S-9180DH 3/3