Академический Документы
Профессиональный Документы
Культура Документы
LATICRETE® 290 Approx 55-60 sft per 20kg bag with 1/4” x 1/4”
Premium Floor and Wall Thin-set (6mm x 6mm) square notch trowel
Adhesive Coverage will vary depending on trowel notch size, type and size of tile and
substrate
PRODUCT DESCRIPTION
LATICRETE® 290 Premium Floor and Wall Thin Set Shelf Life - Factory sealed bag of this product are
Adhesive is a high performance bagged cementitious guaranteed to be of first quality for one (1) year* if
powder to install ceramic tile, Vitrified tiles and stored off the ground in a dry area.
natural stone using the thin-set method of *High humidity will reduce the shelf life of bagged
installation. product.
Application Limitations
Designed for interior installation of ceramic tile, •Do not apply directly to plywood, chipboard,
vitrified tile and natural stone for walls and floors. particleboard, decorative laminates or resilient
Can also be used for shaded balconies, podiums, flooring.
verandas and terrace gardens which are not directly •Do not install tile/stone when surface temperatures
exposed to sun for most part of the day. are below freezing point (32 °F / 0 °C). Always use
*For all other exterior installation of tiles/stones LATICRETE® latex additives when temperatures
with Laticrete® 290, use Laticrete® 73 /Laticrete® approach freezing.
4237/ Laticrete® 333 Admix instead of water. •Adhesives/mastics, mortars and grouts for ceramic
tile, pavers, brick and stone are not designed as
Advantages
• Dual use: for both floors and walls replacements for waterproof membranes. When a
• High bond strength waterproof membrane is required, use a
• High Tack - Will hang tile without slippage
LATICRETE®9237 / Hydroban Waterproof Membrane.
•Easy to Use
•Increased flexibility
•Improved impact resistance Note: Surfaces must be structurally sound, stable
and rigid enough to support ceramic tile/vitrified
Suitable Substrates
tile/stone, thin brick and similar finishes. Substrate
• Concrete •Concrete masonry
• Cement Mortar Beds •Cement Plaster deflection under all live, dead and impact loads,
• Vitrified Tile and Stones • Brick Masonry including concentrated loads, must not exceed L/360
• Cement Terrazzo
for thin bed ceramic tile/vitrified tile/brick
• Very large format tiles/ stones*
installations or L/480 for thin bed stone installations
*When mixed with LATICRETE® 73 Crete Amdix or where L=span length.
Laticrete® 4237 High performance latex admix.
Cost
Contact a LATICRETE® Distributor in your area.
MAINTENANCE
LATICRETE® and LATAPOXY® grouts require routine
cleaning with neutral pH soap and water or MYK
LATICRETE Clenza series suitable cleaners. All other
LATICRETE® and LATAPOXY® materials require no
maintenance but proper installation as per
instruction.
Performance and durability may depend on properly
maintaining of Installed area.