Академический Документы
Профессиональный Документы
Культура Документы
GENERAL REQUIREMENTS
3.1.1 Mortars will be commando type
3.1:2 Mortars will be production of the tender year.
3.1.4 The ammunition will be the same type and model.
3.1.5 The ammunition will be composed and packed after the contract date.
3.1.6 The life of ammo will be at least 10 years in proper storage conditions.
3.3.1 The ammunition will produce both fragment and blast effect.
3.3.2 The components of the complete shell will be consisted of projectile body, fuze,
demountable fins, 4 pcs incrementally increasable propellant charge, ignition cartridge
w/primer.
3.3.3 The body of the ammunition will be made of forged steel. This issue will be certified to the
acceptance commission during the inspection and acceptance test phase.
3.3.4 The ammunition type will be M49A2 HE.
3.3.5 The weight of the shell will be max 1,41kg with fuze.
3.3.6 The length of the shell will be max 25cm. with fuze.
3.3.7 The explosive charge will be min 170g TNT or equivalent type of explosive.
3.3.8 The ammo will be painted khaki green or shadows and the markings on it will be yellow.
3.3.9 According to the propellant charge amounts the muzzle velocities of the ammo is shown
on the below table.
3.3.10 The ammunition will be proper to be fired between the temperatures -40 Cᵒ and +51 Cᵒ
3.2.11 On the paint cover of the ammunition there shall not be any damage, crack, defect,
erosion, scrapping, burr, spalling, corrosion and oxidation. This issue will be committed to
the acceptance commission during the inspection and acceptance test phase
7.1 The warranty period of the ammo and weapons is 2 (two) years starting from the final
acceptance date.
Required quantity:
60mm Mortar weapon: 100 pcs (hundred)
60mm Mortar Ammo: 1000pcs (thousand)