Академический Документы
Профессиональный Документы
Культура Документы
6 1
Auto lock tailgate latches engage Provides two bodies in one vehicle.
when tailgate closes.
BENEFIT
BENEFIT
7 Different compaction rates per
Enhanced safety. compartment available.
WHY IT MATTERS TO YOU WHY IT MATTERS TO YOU
• Reduces possibility of injuries • Single vehicle that can handle
3 8 • Quicker and safer than using
multiple commodities
manual tailgate locks • Increased efficiency
• Reduced cost
CNG INTEGRATION 17
SAFETY CONTROLS 18
5
front 20,000
Hopper sizes 1.5 & 1.1 yd3 Gross axle weight rating (GAWR)*
rear 48,000
Packing cycle time 17 seconds
in. 160-166
Reload time 10 seconds Minimum cab to tandem (CT)
mm 4064-4216
in. 56
Hydraulic Specifications Minimum after frame (AF)
mm 1422
PUMP in. 213-219
Type Tandem vane Minimum platform
mm 5410-5563
Maximum Operating Pressure 2,500 psi @ 1,300 RPM in. 187-193
OIL RESERVOIR Wheelbase (cab-over)
mm 4750-4902
Tank Capacity 50 gallons
Additional notes
3 micron return filter with in-cab filter monitor; • Must have front crank drive pump provision.
Filters
100 mesh reusable suction screen • Low entry C.O.E dual-drive recommended.
• Any chassis sent to Heil Environmental with less than these minimum * For GVWR/GAWR contact
VALVES GVWR/GVAR requirements will not be mounted. customs@heil.com for weight distribution.
Shut-off Ball valve
Packing control Spool type
Ejector and tailgate raise Spool type Body Specifications 25 yd3
yd3 25
Total body capacity
Cylinder Specifications m3 19.1
BODY CYLINDERS TYPE Bore in. 285
Overall length
in. 3.0 mm 7240
Tailgate raise and lock (4) Double acting in. 97
mm 76.2 Overall width
in. 4.0 mm 2460
Packer panels (4) Double acting in. 97
mm 102 Over height above frame
in. 4.5 mm 2464
Slide panels (4) Double acting in. 155
mm 114 Overall height tailgate raised
(2) Double acting in. 6.5 mm 3940
Ejector panels lbs. 22,500
4-stage telescopic mm 1651 Gross weight (approximate)
kg 10205
Body Chamber Specifications 20 yd 3
25 yd 3
Tailgate Specifications
yd3 12 15
curb side (60%) yd3 1.5
m3 9.1 11.4 curb side (60%)
Volume m3 1.14
yd3 8 10 Hopper capacity
street side (40%) yd3 1.1
m3 6.1 7.6 street side (40%)
in. 48.1 48.1 m3 0.84
curb side in. 5
mm 1220 1220 Loading sill height below chassis frame (both)
Inside width mm 51
in. 35.3 35.3
street side in. 43.3
mm 900 900 curb side
in. 78.7 78.7 mm 1100
curb side Hopper width
mm 2000 2000 in. 31.5
Inside height street side
in. 78.7 78.7 mm 800
street side in. 66.5
mm 2000 2000 Hopper opening height (both)
mm 1690
All designs, specifications, and components are subject to change at the manufacturer’s sole discretion at any time without notice. Data published herein is for information purposes only
and shall not be construed to warrant suitability of the unit for any particular purpose, as performance may vary with the conditions encountered. The only warranty is our standard written
Warranty Statement for this product at the time of shipment.