Академический Документы
Профессиональный Документы
Культура Документы
ZV9H57FJUKKLPRRV
*** 'Micro Fiber Chema' does not require you to rinse after step 2.
4975759001577
ZV9H57FJUKKLQKRV
3. Wipe it off by squeezing water of the cloth, then it is finished.
4975759001607
ZV9H57FJUKKMTSRV
3. After surface gets dry (5-15 min. in the summer, 15-20 min. in the winter), 4975759002987
wipe off with a dry soft clean towel for finish.
*We recommend using "Fukupika" series as daily maintenance.
ZV9H57FJUKKNKKRV
3. After surface gets dry (5-15 min. in the summer, 15-20 min. in the winter), 4975759003007
wipe off with a dry soft clean towel for finish.
*We recommend using "Fukupika" series as daily maintenance.
Exterior Car Care Coating Agent 2
ZV9H57FJUKKNNRNV
2. Put the liquid on the yellow side of the included sponge and then spread it on
the car evenly. 4975759003373
3. Dry for 10-15minutes and wipe it off with a clean and soft towel.
ZV9H57FJUKKNNSKV
2. Put the liquid on the yellow side of the included sponge and then spread it on
the car evenly. 4975759003380
3. Dry for 10-15minutes and wipe it off with a clean and soft towel.
ZV9H57FJUKKNNTRV
2. Put the liquid on the yellow side of the included sponge and then spread it on
the car evenly. 4975759003397
3. Dry for 10-15minutes and wipe it off with a clean and soft towel.
All you need to do is put the liquid on the included microfiber cloth and spread it
Case dimension
evenly. Wiping off is NOT necessary!!! The effects of duration and antifouling
W 308 H 227 D 547 mm
last up to 9 months. It repels water and oil.
Applying on a deteriorated surface will bring out the shine and strength in the Case weight
car's paint. Petroleum solvent and abrasive compound are NOT included! 8.4 kg
Case unit
Directions
20
*Wipe off dirt marks and remove water drops remaining on the surface.
1. Shake the bottle well and put the liquid on the included cloth. Control No.
2. Spread it on the car surface as evenly as possible. Drying or wiping off is R-142
NOT necessary!
JAN code
ZV9H57FJUKKNPLTV
4975759003519
Exterior Car Care Coating Agent 3
All you need to do is put the liquid on the included microfiber cloth and spread it
Case dimension
evenly. Wiping off is NOT necessary!!! The effects of duration and antifouling
W 308 H 227 D 547 mm
last up to 9 months. It repels water and oil.
Applying on a deteriorated surface will bring out the shine and strength in the Case weight
car's paint. Petroleum solvent and abrasive compound are NOT included! 8.4 kg
Case unit
Directions
20
*Wipe off dirt marks and remove water drops remaining on the surface.
1. Shake the bottle well and put the liquid on the included cloth. Control No.
2. Spread it on the car surface as evenly as possible. Drying or wiping off is R-143
NOT necessary!
JAN code
ZV9H57FJUKKNPMQV
4975759003526
You can use it even on the wet car. All you need to do is spray and wipe it off
Case dimension
with the included micro fiber cloth. It brings out all effects of "gloss", "water
W 275 H 225 D 570 mm
repellence" and "anti-fouling", and makes your car look cool. The effect lasts far
longer and makes daily maintenance easier, when using this on the dry car. Not Case weight
only can you use it for car body, but also for unpainted parts made of resin such 7.7 kg
as car visors or around wipers. Any colors of cars are compatible with this Case unit
product.
20
Directions Control No.
1. Remove dirt or dust with water. W-175
2. Shake the bottle well and take off the stopper at the lever.
JAN code
3. Spray it on the surface and wipe it off.
ZV9H57FJUKKNSTMV
4975759003892
ZV9H57FJUKKPLKKV
* Can be used on a dry surface.
* Apply roughly one spray per 9.1 square ft. (30cm2). 4975759005100
3. Fold the included cloth into quarters and wipe down the body of vehicle,
wringing the cloth to dry as needed.
ZV9H57FJUKKPLTNV
*When use it on wet surfaces, wipe down wringing the cloth as needed.
*If the body gets heavily soiled, wash the car in advance, otherwise scratches 4975759005193
may be left behind on the surface.
Exterior Car Care Coating Agent 4
ZV9H57FJUKKPMKTV
2. Wipe down, spreading the mousse on the entire surface.
* When use it on wet surfaces, wipe down wringing the cloth as needed. 4975759005209
* If the body gets heavily soiled, wash the car in advance, otherwise scratches
may be left behind on the surface.
ZV9H57FJUKKPMLQV
2. Detach the trriger and spray in wet condition car body.
* Moderate amount is 3 shots for 50 square cm. 4975759005216
3. Wipe off immediately with included towel.
ZV9H57FJUKKPMMNV
* If use in dry condition, spray 1 shot for 50 square cm.
3. Wipe off immediately with included towel. 4975759005223
This is refill pouch pack of "Smooth Egg Hydro Flash". This product protects
Case dimension
from water stain which occurs after rain. Consider about garbage reduction,
W 335 H 210 D 215 mm
and resource saving, we adopt pouch type and easily refill to bottle without
scissor. Case weight
6.6 kg
Case unit
Directions
30
1. Firmly bring spout and cut along with dotted line.
*Do not bring the pouch pack strongly, otherwise liquid may splatter. Control No.
2. Hold the bottom of the package in one hand, supporting it with the other W-524
hand by placing it.
JAN code
ZV9H57FJUKKPMORV
4975759005247
Exterior Car Care Coating Agent 5
ZV9H57FJUKNLNNSV
drying for about 1 minute. 4975759031338
*The coating takes 3-4 days to harden completely. Do not touch or wet the car for 24 hours
after applying.
03134 BLACK PARTS ONE -Unpainted Resin Parts Refresh Kit- Spec info.
Base Cleaner 40ml/Coating Liquid 8ml
4 special sheets / 4 special sponges
This product is for the unpainted resin parts such as a part of a bumper or
Case dimension
around wipers. 2 kinds of liquid are included in this package; 'Liquid Binder',
which removes dirt marks from the surface of resin parts, and 'Hard Clear W 486 H 216 D 252 mm
Coat', which creates Silicon-based thick and hard coating. This coating is hard Case weight
to soften and get dirty, therefore, it can keep your car body in good condition for
a long time. 3.3 kg
Case unit
Directions 20
* Remove any stubborn dirt marks with water and wipe off any water drops
remaining on the surface in advance. Control No.
1. Shake the bottle of 'Liquid Binder' well. Put a small amount of the liquid on E-57
the included sheet and spread it evenly. Afterward, wipe it off with the clean
side of the sheet. JAN code
2. Detach a piece from sponges, put the liquid of 'Hard Clear Coat' on the black
ZV9H57FJUKNLNOPV
side of the sponge, and then apply it evenly. 4975759031345
* Do not touch the car for 24 hour after applying.
* If the liquid gets on the other parts, wipe it off immediately.
It restores the transparency and vivid color like a new car, when you apply this product on
transparent resin parts such as headlights, winkers or car-visors which lost transparency Case dimension
by deterioration after they have been used for a long time. The effect of "Crystal blue W 235 H 188 D 454 mm
Coating" makes yellowing transparent resin beautiful. Unlike the temporal lustering agents
made of Silicone Oil or so on, it creates thin-film glass coating on the surface made of Case weight
resin. Furthermore, the effect lasts for more than 6 months, at the same time at brings out 2.0 kg
high water repellency and prevents deterioration of resin itself.
Case unit
Directions 50
1. Remove dirt or oil completely in advance. If you use water to do, dry until no water drops Control No.
remains.
* We recommend masking around the area that you will apply. E-55
2. Wear the included gloves and shake the bottle well. Afterward, put the liquid on the
included sponge and spread it evenly. JAN code
3. Spread it evenly again with another clean sponge. Do not use the sponge which you
ZV9H57FJUKNLOOOV
already used. 4975759031444
* Do not touch or wet the car for 24 hours after applying. And the coating takes 3-4 days to
harden completely.
Once you apply for blushing rubber and unpainted plastic parts, this agent
Case dimension
restores black shine.
W 388 H 212 D 290 mm
Harden layer is reacted with air, prevents fading and restore black shine up to 6
months.* Case weight
It is available not only for a hard unpainted plastic but also for soft material such 2.6 kg
as rubber parts, roof molding, and weather strip without cracking coated layer. Case unit
*Test by SOFT99
30
<Spec info.> Control No.
Coating Agent (15mL) x 1bottle B-500
Hard Sponge x 2pcs
JAN code
Soft Sponge x 2pcs
ZV9H57FJUKTPKKMV
Silicone off Wipes x 3sheets
Gloves x 2pcs 4975759095002
Exterior Car Care Coating Agent 6
Create strong fluorine layer "PTFE" on car paint surface without base treatment.
Hydrophobic properties lasts up to 7 months* and the newly formulated polymer develops Case dimension
an impermeable coating on the surface that remains for far longer than conventional
products. W 550 H 238 D 300 mm
Easy to buff off and prevent stain comparing with conventional solid type. This product Case weight
protects from various kind of dirts by creating un-penetrated fluorine polymer shield on top
of paint surface. 7.8 kg
Compatible for all color vehicle.
* by SOFT99 test Case unit
Directions 30
* Make sure that the product is compatible car paint color. Control No.
1. Rinse and wash car to remove dirt and sand. If heavily soiled, use car shampoo or
cleaner.
2. Shake the bottle well.
3. Apply the moderate amount of liquid on the yellow side of included sponge and spread JAN code
evenly. Then you can remove the dirt at the same time.
* If the dirt is stubborn, use a clay bar to smoothen the paint, achieve better durability and
ZV9H57FJULKNNTOV
beautiful finish. 4975759103394
4. Let it dry (5-10 in summer, 15-25 in winter), buff it off with soft and clean towel.
* If the body gets dirty, wash with diluted neutral car shampoo or water, then restore
hydrophobic and glossiness. As for daily maintenance, use "Fusso Coat Speed & Barrier
Hand Spray".