Академический Документы
Профессиональный Документы
Культура Документы
PERANCANGAN KULIAH
LECTURE PLAN
(Final examination)
JUMLAH JAM BELAJAR PELAJAR (JBP) 120
(TOTAL STUDENT LEARNING TIME (SLT))
MATLAMAT (GOALS):
This course is designed to produce a competent engineer who has a strong knowledge in mechanics of
material and able to transfer their knowledge in solving problems related to strength of material.
SINOPSIS (SYNOPSIS):
This course will cover the introduction to stress and strain concept. Then, shear force and bending
moment will be introduced in chapter two. Later, it moves into bending stress and subsequent chapter is
torsion. The last two chapters are thin cylinder and stress analysis.
(1) Engineering Knowledge - Apply knowledge of stress, strain and mechanics to the solution of
engineering problems (C3, LO1)
(2) Problem Analysis - Explain and show a solid mechanics problem reaching substantiated
conclusions using first principles of engineering mechanics (C4, LO11)
(3) Individual and Team Work - Function effectively as an individual, and as a member or leader
in diverse teams and in multi-disciplinary settings to solve solid mechanics problems (A3,
LO5)
PENTAKSIRAN (ASSESSMENT):
4.Ujian 1 (Test 1) : 15 %
5.Ujian 2 (Test 2) : 15 %
6.Projek Berkumpulan (Group Project) :8%
7.Peperiksaan Akhir (Final Examination) : 50 %
Jumlah (Total) : 100%
RUJUKAN (REFERENCES):
1. Hibbeler, R.C. (2014) Mechanics of Materials, 9thEdition, Pearson, Prentice Hall. TA405 .H54
2014.
2. Beer, F. P., Russell, E. J., Dewolf, J. T. and Mazurek D. F. (2012) Mechanics of Materials, 6th
ed. McGraw-Hill, New York. TA405 .M434 2012.
3. Gere, J. M. (2012) Mechanics of Materials, Brief Edition, Cengage Learning, Canada. TA405
.G47 2012.
4. Riley W. Sturges, L. and Morris, D. (2007) Mechanics of Materials, 6th Edition, John Wiley &
Sons Inc, New Jersey. TA405 .R54 2007.
5. Pytel, A. (2012) Mechanics of Materials,2nd Edition, Cengage Learning, USA. TA405 .P97
2012.
1. Pelajar mesti hadir tidak kurang dari 80% masa pertemuan yang ditentukan bagi sesuatu kursus
termasuk kursus Hadir Wajib (HW) dan kursus Hadir Sahaja (HS).
Students must attend not less than 80% of the contact hours specified for a course including
Compulsory Attendance (HW) course and Attendance Only (HS) course.
2. Pelajar yang tidak memenuhi perkara 1 di atas tidak dibenarkan menghadiri kuliah dan
menduduki sebarang bentuk pentaksiran selanjutnya. Markah sifar ‘0’ akan diberikan kepada
RPP-04 / Prosedur Pelaksanaan Kuliah
Edisi: / No. Semakan:
Lampiran A
pelajar yang gagal memenuhi perkara 1. Manakala untuk kursus HW, pelajar yang gagal
memenuhi perkara 1 akan diberi gred Hadir Gagal (HG).
Students who do not fulfill item 1 of the above are not allowed to attend further lecture and sit for
any form of assessment. Zero ‘0’ mark will be given to students who fail to comply with item 1. As
for HW course, students who fail to comply with item 1 will be given Failure Attendance (HG)
grade.
3. Pelajar perlu patuh kepada peraturan berpakaian yang berkuatkuasa dan menjaga disiplin diri
masing-masing untuk mengelakkan dari tindakan tatatertib diambil terhadap pelajar.
Students should adhere to the dress regulations in effect and must discipline themselves to avoid
from any disciplinary actions.
4. Pelajar perlu mematuhi peraturan keselamatan semasa aktiviti pembelajaran dan pengajaran.
Students should adhere to the safety regulations during the learning and teaching activities.
Fakulti (Faculty) : FAKULTI KEJURUTERAAN MEKANIKAL & PEMBUATAN Matrik ini perlu digunakan bersama:
(This matrix is to be used together with)
Program (Programme) : SARJANA MUDA KEJURUTERAAN MEKANIKAL (BDD) 1. Objektif Pendidikan Program (PEO)
(Programme Educational Objectives (PEO))
Kod Kursus (Course Code) : BDA 10903 2. Hasil Pembelajaran Program (PLO)
(Programme Learning Outcomes (PLO))
Nama Kursus (Course Title) : MEKANIK PEPEJAL I / SOLID MECHANICS I